AG0120S150014_LandingCraft_rfp_FNL.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE

Offeror to complete blocks 12, 17, 23, 24, & 30 732467 1 of 42

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AG-0120-S-15-0014- 27 April 2015

7. FOR SOLICITATION

a. NAME b. TELEPHONE (No Collect Calls) 8. OFFER DUE DATE/

LOCAL TIME

INFORMATION CALL Denise Murphy – denisemurphy@fs.fed.us 907-743-9531 19 May 2015, 10am

9. ISSUED BY (MAIL OFFERS TO) CODE 10. THIS ACQUISITION IS UNRESTRICTED or SET-ASIDE. 100% FOR

USDA, Forest Service

R10 Alaska, Chugach NF

161 East 1 st Avenue, Door 8

Anchorage AK 99501

SMALL BUSINESS WOMEN-OWNED SMALL

BUSINESS (WOSB)

HUBZONE SMALL NAICS: 336612

BUSINESS ECONOMICALLY DISADVANTAGED

SERVICE-DISABLED WOMEN-OWNED SMALL BUSINESS

VETERAN-QWNED (EDWOSB)

SMALL BUSINESS 8(A) SIZE STANDARD: 500 employees

11. DELIVERY FOR FOB DESTINATION UNESS | 12. DISCOUNT TERMS

BLOCK IS MARKED |

SEE SCHEDULE |

| 13b. RATING

13a. THIS CONTRACT IS A RATED ORDER |_______________________________________________

DPAS (15 CFR 700) | 14. METHOD OF Solicitation

| RFQ IFB RFP

15. DELIVER TO: CODE 16. ADMINISTERED BY CODE

Whittier, Alaska 99503 – reference statement of work USDA, Forest Service

R10 Alaska, Chugach NF

161 East 1 st Avenue, Door 8

Anchorage AK 99501

17a. CONTRACTOR/OFFEROR CAGE FACILITY

CODE 18a. PAYMENT WILL BE MADE BY CODE

INVOICE PROCESSING PLATFORM – IPP ALL INVOICES

MUST BE SUBMITTED ELECTRONICALLY THROUGH THE

INVOICE PROCESSING PLATFORM IPP VIA www.ipp.gov

TELEPHONE: TIN: 18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER IS CHECKED: SEE ADDENDA

19.

ITEM NO,

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

1 30ft Welded Aluminum Landing Craft/Crew Boat Package 1 EA

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 and ADDENDA ARE ARE NOT ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 AND ADDENDA ARE ARE NOT ATTACHED.

28.

CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN ORIGINAL TO ISSUING OFFICE.

CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE

IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED HEREIN.

29.

AWARD OF CONTRACT: YOUR OFFER ON SOLICITATION (BLOCK 5), DATED

(BLOCK 30c) INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 1449 (Rev. 3/2011) PREVIOUS EDITION IS NOT USABLE Prescribed by GSA FAR (48 CFR) 53.212 mailto:denisemurphy@fs.fed.us http://www.ipp.gov/

ADDENDA SHEET

PROJECT NAME: Landing Craft/Crew Boat Pkg

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

OF

19. ITEM NO 20. SCHEDULE OF SUPPLIES/SERVICES 21. QTY 22. UNIT 23. UNIT PRICE 24. AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: _______________________

32b. SIGNATURE OF AUTHORIZED GOVT.

REPRESENTATIVE

32c. DATE 32.d PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32.e MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32.f TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32.g E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

36. PAYMENT 37. CHECK NUMBER

COMPLETE PARTIAL FINAL

PARTIAL FINAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE 42b. RECEIVED AT (Location)

42c. DATE REC’D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 3/2011) BACK

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

CONTINUATION OF SF 1449:

SCHEDULE OF ITEMS

ITEM NO. DESCRIPTION

EST.

QTY

PAY

UNIT

UNIT

PRICE

AMOUNT

30ft welded aluminum landing craft/crew boat package

EA

TOTAL ALL ITEMS $

VENDOR INFORMATION

POC NAME:

PHONE:

ADDRESS:

CELL:

EMAIL:

DUNS:

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

CONTRACT CLAUSES

52.252-2 -- Clauses Incorporated by Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/ www.usda.gov/procurement/policy/agar.html

FAR 52.212-4 – Contract Terms and Conditions – Commercial Items. (Dec 2014)

52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive

Orders -- Commercial Items. (Mar 2015)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or

Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

XX (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with

Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C.

3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment

Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the

American Recovery and Reinvestment Act of 2009).

XX (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards

(Jul 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment (Aug 2013) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters

(Jul 2013) (41 U.S.C. 2313).

XX (10) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (May

2012) (section 738 of Division C of Public Law 112-74, section 740 of Division C of Pub. L.

111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L.

110-161).

http://farsite.hill.af.mil/ http://www.usda.gov/procurement/policy/agar.html

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15

U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business

Concerns (Oct 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved]

XX (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and

(3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2014) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Oct 2001) of 52.219-9.

___ (iii) Alternate II (Oct 2001) of 52.219-9.

___ (iv) Alternate III (Oct 2014) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

XX (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov

2011) (15 U.S.C. 657f).

XX (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15

U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small

Business (EDWOSB) Concerns (Jul 2013) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns

Eligible Under the WOSB Program (Jul 2013) (15 U.S.C. 637(m)).

XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

XX (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2014)

(E.O. 13126).

XX (27) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

XX (28) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

XX (29) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212).

XX (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C.

793).

XX (31) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

XX (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations

Act (Dec 2010) (E.O. 13496).

XX (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

XX (34) 52.222-54, Employment Eligibility Verification (Aug 2013). (Executive Order

12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-

Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014)

(E.O.s 13423 and 13514

___ (ii) Alternate I (Jun 2014) of 52.223-13.

___ (37) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C.

8259b).

___ (39) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Jun

2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

XX (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving

(Aug 2011) (E.O. 13513).

___ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

XX (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May

2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

XX (iv) Alternate III (May 2014) of 52.225-3.

___ (43) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (44) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the

Department of the Treasury).

___ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United

States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal

Year 2008; 10 U.S.C. 2302 Note).

___ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

___ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov

2007) (42 U.S.C. 5150).

___ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41

U.S.C. 4505), 10 U.S.C. 2307(f)).

___ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10

U.S.C. 2307(f)).

XX (50) 52.232-33, Payment by Electronic Funds Transfer— System for Award

Management (Jul 2013) (31 U.S.C. 3332).

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

___ (51) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award

Management (Jul 2013) (31 U.S.C. 3332).

___ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb

2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

___ (1) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

___ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price

Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C.

chapter 67).

___ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price

Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May

2014) (41 U.S.C. chapter 67).

___ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to

Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

___ (8) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42

U.S.C. 1792).

___ (9) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

___ (10) 52.222-55, Minimum Wages Under Executive Order 13658 Dec 2014)(Executive Order

13658).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the

Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor

Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

(ii) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $650,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(iii) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

(v) 52.222-35, Equal Opportunity for Veterans (Jul 2014) (38 U.S.C. 4212).

(vi) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(vii) 52.222-37, Employment Reports on Veterans (Jul 2014) (38 U.S.C. 4212).

(viii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec

2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause

52.222-40.

(ix) 52.222-41, Service Contract Labor Standards (May 2014), (41 U.S.C. chapter 67).

(x) ____ (A) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xi) 52.222-51, Exemption from Application of the Service Contract Labor Standards to

Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May

2014) (41 U.S.C. chapter 67.)

(xii) 52.222-53, Exemption from Application of the Service Contract Labor Standards to

Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xiii) 52.222-54, Employment Eligibility Verification (Aug 2013).

(xiv) 52.225-26, Contractors Performing Private Security Functions Outside the United States

(Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year

2008; 10 U.S.C. 2302 Note).

(xv) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42

U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xvi) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46

U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph

(d) of FAR clause 52.247-64.

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2014) (Executive Order

13658).

(2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

AGAR 452.209-71 ASSURANCE REGARDING FELONY CONVICTION OR TAX

DELINQUENT STATUS FOR CORPORATE APPLICANTS Alternate 1 (FEB 2012)

(a) This award is subject to the provisions contained in the Consolidated Appropriations Act, 2012 (P.L.

No. 112-74), Division E, Sections 433 and 434 regarding corporate felony convictions and corporate federal tax delinquencies. Accordingly, by accepting this award the contractor acknowledges that it-

(1) does not have a tax delinquency, meaning that is it not subject to any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, and

(2) has not been convicted (or had an officer or agent acting on its behalf convicted) of a felony criminal violation under any Federal Law within 24 months preceding the award, unless a suspending and debarring official of the United States Department of Agriculture has considered suspension or debarment of the awardee, or such officer or agent, based on these convictions and/or tax delinquencies and determined that suspension or debarment is not necessary to protect the interests of the Government.

(b) If the awardee fails to comply with these provisions, the Forest Service may terminate this contract for default and may recover any funds the awardee has received in violation of sections 433 or 434.

AGAR 452.215-73 POST AWARD CONFERENCE (NOV 1996)

(a) A post award conference with the successful offeror is required. It will be scheduled within 10 (ten) days after the date of contract award. The conference will be held on a mutually agreed upon date and time.

(b) Contractor designated representative or foreman (whomever the Contractor will have on the site) shall be present at the prework conference.

GOVERNMENT-FURNISHED PROPERTY

The Government will provide the following item(s) of Government property to the Contractor for use in the performance of this contract. This property shall be used and maintained by the Contractor in accordance with provisions of FAR Clause 52.245-1 "Government Property" hereby incorporated by reference into the contract in accordance with FAR clause 52.252-2 “Clauses Incorporated by Reference” found herein.

Item No. Property Description Qty Location Date Available

01 Raymarine C120w digital display unit 1 Contractor’s Shop Nov 2015

02 Raymarine DSM250 1 Contractor’s Shop Nov 2015

03 Raydome rooftop unit 1 Contractor’s Shop Nov 2015

04 GPS antenna and all associated wiring 1 Contractor’s Shop Nov 2015

05 Forest Service radio, wiring harness, mount and antenna

1 Contractor’s Shop Nov 2015

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

CONTRACT DOCUMENTS, EXHIBITS AND/OR ATTACHMENTS

WCF Boat Replacement for WCF #2350 Landing Craft / Vessel Package

Description of Supplies/Services

The USDA Forest Service, Chugach National Forest is soliciting quotes for supply of one (1), 28ft to 32ft, (mono hull configuration) welded all aluminum landing craft/crew boat package

(boat, motors and trailer). This boat shall be capable of shallow draft operations in rough seas

(6-8ft wave height), in Prince William Sound Alaska, and shall be able to have the engines raised fully out of the water. The intent of this vessel is to allow Forest Service field crews the ability to haul six to eight (6-8) passengers and/or minimum 3000lbs of building materials and make regular shore landings to load and unload materials and personnel directly from an open forward deck to shore via a narrow opening drop bow door. Transported materials will include dimensional lumber up to 12ft in length and should fit on an open forward deck. Materials also include propane tanks transported using a heavy duty wheeled dolly and wheeled over-packers carrying 35 gallon salvage drums. The vessel cabin shall be designed to provide walk through capability allowing for easy and safe access to both the bow and transom. The cabin length and location shall maximize forward open deck space while still providing room for safe access to a swim step transom. A Drop Bow Door shall be designed with a ramp to safely allow occupants to walk out on shore or assist others with loading and unloading materials from shore. Drop bow door shall measure 36 inches minimum and 42 inches maximum width to allow a maximum degree deadrise at bow to improve seaworthiness.

The Government requires this vessel be provided with an Alaska Bulkhead configuration cabin including swinging doors and fixed windows (Alaska Bulkhead means a glass enclosure for weather protection.). Captain seat and co-pilot seats shall be air ride type. Vessel shall be furnished with the basic navigational lighting and appurtenances and furnished with hydraulic steering and trim tabs. An aluminum radar arch to allow clearance for cabin roof transportation of sea kayaks. Elevated skiff tie down bars, (grab rails) shall also be installed on both sides of cabin roof along with a roof access ladder. Cabin shall be equipped with features specified below.

Vessel shall be powered with a pair (2) four-stroke outboards capable of economically propelling vessel with a full payload. One motor shall be counter rotating. Package shall include all necessary hardware and rigging, including duel fuel/water separators. Galvanized or aluminum bunk style boat trailer with surge brakes, tongue jack and spare tire is required.

The Government requires a minimum fuel capacity of 200 gallons. Further, the boat shall have a minimum 10 gallon tank of diesel to fuel cabin heater and a 20 gallon freshwater wash down tank.

The boat shall be painted with non-skid paint on all walking surfaces including the cabin roof.

The hull shall be painted with black marine, anti-fouling hull paint, on bottom to four (4) inches above water line. Vessel hull bottom and sides shall be fabricated of ¼ inch marine grade aluminum and scuppers allowing decks to self-bail. Cargo tie-downs are required along each side of decks. Two (2) standard hinge boarding doors shall be included on the port and starboard sides mid-ship. An electric powered davit/crane shall be installed port side in between boarding

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

door and cabin. Davit height and location to allow for; (1) lifting inflatable skiff off forward cabin roof and (2) lifting man overboard from water onto deck via port side boarding door. Hull includes bow anchor pulpit with 12v anchor rode and storage. Hull design furnished shall have no less than five (5) years of successful open water operations and customer satisfaction.

The vessel package shall include all the items listed in the specifications.

Electronics including: Raymarine C120w digital display unit, Raymarine DSM250, Raydome rooftop unit, GPS antenna and all associated wiring must be installed by the vendor. These items will be supplied by the government after removal from our current vessel in operation.

Test and Trials: Prior to shipment, from the contractor’s facility, the contractor shall complete the tests and trials listed below:

Operational trials – demonstrate the correct operation of all on board systems and machinery components.

Full Load Speed and stability trials – demonstrate that the vessel can achieve top speed and perform well in rough seas as well as handle maneuvers at both slow and high speeds with maximum or near maximum weight for stability testing.

Noise Survey – demonstrate that the vessel meets the required noise limits (OSHA

Standards).

Package of documentation: The following documents shall be provided, by the contractor, for the purpose of operating and maintaining the vessel: arrangement drawings of electrical, plumbing, heating, navigation and hydraulic systems including equipment mounting and servicing points/offsets, Coast Guard AIS vessel ID, equipment operating and service manuals, sea trial reports, warranties and winterization guide.

The Forest Service’s participation in initial sea trials and tests, and hands on training are both dependent on the availability of funding. If funds are available, the contractor shall provide hands on operational training to Forest Service personnel either in conjunction with the initial tests and sea trials or after delivery in Whittier, AK. The possible scenarios are:

The contractor shall provide one month’s advance notice, to the Contracting Officer’s

Representative, regarding when the initial tests and sea trials will be conducted. The purpose of the advance notice is to allow the Forest Service time to be on location for the initial tests; sea trials and for demonstration and instruction on the correct operation of all on board systems and machinery components as well as maneuvering and speed capabilities and a general overview of all systems and needed maintenance and operating procedures (No additional cost to the Forest

Service for this scenario.); or

Vessel shall be delivered, as a turnkey unit, FOB Whittier, Alaska 99503 by 31 March 2016.

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

Specifications

Qty Item Name Description

1 28' to 32' Welded Aluminum Alloy Hull Vessel w/enclosed cabin. Alaska Bulkhead (Sealed/watertight)

• 32' max vessel length overall.Mono hull configuration with outboards mounted on a swim step transom.

• 10’ max beam width to ensure clearance through the Whittier Tunnel

• Three (3) bulkheads

• Four (4) water tight chambers

• aluminum hatch access covers measuring at least 15’’x 24’’ in size providing access to chambers. One on deck and one inside cabin.

• All welded self-bailing decks with scuppers

• Hull constructed of 5086 Alloy aluminum .250" bottom plate

• 5086 Alloy aluminum side plate

• Twin 100 or single 200 gallon main fuel tanks depending on design and construction of hull.

• 10 gallon diesel tank with plumbing to cabin heater.

• 20 gallon fresh water tank for wash down system.

• Side height 40’’ minimum (deck to gunnel top, not including rails).

• Aluminum gunnel rails installed along open forward deck both port and starboard sides. Lower rails installed along gunnels for equipment tie down.

• Cabin shall be designed to provide walk through capability to allow for easy and safe access to both the bow and transom with swinging doors.

• Bow shall be designed with a drop down ramp to safely allow loading and unloading of passengers and supplies from shore and no wider than 42” and at least 36’’.

• Vessel shall be designed to comfortably seat a minimum of 6 people with the ability to store all gear, supplies and survival equipment.

1 Trailer 15,000+ lbs triple axel trailer. Galvanized or aluminum with wash down system, surge breaking system and spare tire.

2 Motors 250 HP Four Stroke Suzuki or Yamaha outboards. Include price for 225hp motors as well. Each motor shall have its own battery and a separate fuel pick up line and fuel water separator filter.

(Requesting brand name due to availability of authorized service shops in local Anchorage, AK area.)

1 Insulated Cabin Insulated cabin w/hull liner type insulation, marine vinyl and solid teak/oak trim.

1 D4LM Espar D5LM marine heater with heating vents to cabin and both windshields (Salient characteristic: use of diesel fuel or kerosene for operation of the heater.)

3 Electric Fans Electric fans mounted to ceiling in cab for air circulation

1 Electric powered Davit/Crane

Electric powered davit/crane with marine grade electric winch that will enable removal of dingy from roof of cab. Winch capacity:

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

Minimum 300 pounds.

1 Dashboard configuration

Operator side dash board (starboard) should be cut to accommodate an in-dash mounting of Forest Service provided Raymarine C120W multi-function unit.

1 Raymarine P66 Transom Mount Transducer

Provide and install/mount to hull at stern and run wire to cabin for connection to C120W multi-function unit display unit. (Brand name requested because this unit must work with Government Furnished Property that will be provided and installed.)

1 IC-M304 Icom 304 marine Radio in dash installation (Brand name mentioned as an example only.)

1 Antenna Comrod A V60BI 8' VHF Antenna installed to radar arch. (Brand name mentioned as an example only.)

2 Cabin Seats Air ride type seats for driver and navigator mounted on open storage pedestals. Passenger seats either bench configuration or dinette table configuration with accessible storage underneath.

1 Wash down system Wash down pump with hose coil system for freshwater washing of cabin windows.

1 Cabin Roof Accessories

Full cabin width aluminum radar arch with minimum 30'' clearance from roof top allowing for elevated mounting of navigation aids and antennas. Elevated skiff tie down bars, (grab rails) shall also be installed on both sides of cabin roof along with a roof access ladder.

1 Fuel Filling All fuel filling outlets shall be of larger size to accommodate quicker filling and located near the rear deck area. Fuel filling outlets shall be protected from water drainage off bulkhead roof.

1 Battery System House battery 1 group 27, plus two other engine start batteries.

System should have charger relay installed and two switches, one for engine batteries and one for house battery.

2 Boarding Doors Two (2) standard hinge boarding doors shall be included on the port and starboard sides just forward of cabin. Door shall be water tight.

6 Deck Cleats Three 10'' cleats per side.

2 Automatic bilge pumps

Two automatic 1250 G.P.H bilge pumps installed and accessible with a deck hatch.

2 Zincs 2 standard zincs and mounting brackets on hull.

7 Cabin windows All Cabin windows to be Safety Glass. Sliding windows open from aft to stern (captain and co-pilot windows should open).

1 12 Volt DC Panel Accessible in cabin 12 volt DC panel and all boat wiring.

2 DC outlets Outlets mounted in cab for charging electronic equipment

2 Windshield wipers Separate controls for both the driver side (on control dash) and co-pilot side (located accessible to co-pilot seat)

2 Cabin Lights Two interior lights mounted to cabin roof sufficient to illuminate cabin.

2 Running Lights Standard port and starboard side.

2 Cabin Roof Safety Aluminum vertical grab rails mounted on cabin roof top on port

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

Rails / Tie Downs and starboard sides.

1 Cabin Roof Access Ladder

Aluminum rail ladder allowing roof access via a side gunnel or rear deck area.

1 Life Sling Mount Aluminum mount to be located on front deck near davit and boarding door.

1 Second Davit Location

Build in housing and wiring for a second davit location located near the port side bow.

1 Anchor Light Mounted on Radar Arch Offset to allow for center position of RayDome radar unit.

1 Spot Light ACR brand, RLC 300 model, R/C spotlight, product #1933 (Brand name mentioned as an example only.)

2 Deck Lights LED Deck lights mounted to illuminate deck area.

2 Bow Lights LED bout lights mounted so they are protected from damage.

1 Stern Rooftop Extension

Extend cabin rooftop to cover rear deck area.

1 Painted non-skid deck and cabin rooftop

Standard marine non-skid paint black color.

2 Forward deck lockers

Watertight deck lockers measuring 16’’width x 30’’ length x 20’’ tall. Shall be non-skid coated and have keyed locks.

1 Propane Tank deck storage

Deck storage rack to safely hold four (4) aluminum propane tanks that measure 12.25’’ diameter and 32’’ tall.

1 Government Supplied Electronics Installation

Installation of Raymarine C120w digital display unit, Raymarine DSM250, Raydome rooftop unit, GPS antenna (electronic equipment to be provided by government) and all associated wiring.

4 Cabin seating Captain seat and co-pilot seat shall be air ride type, elevated to maximize visual field with accessible storage underneath. Two (2) padded benches each at least 60’’ length with accessible storage underneath. Padded seat back cushions to be installed with the benches.

1 Bow Anchor Pulpit with deck mounted anchor puller

Bow Anchor Pulpit with 12V anchor puller and deck storage locker for anchor rode.

1 Small skiff outboard motor mount

Welded Aluminum mount to secure a 8hp outboard skiff motor

EXHIBITS

Exhibits include pictures of boats with desired features and a conceptual drawing showing the general deck layout are provided for reference.

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

ATTACHMENTS

The attachments listed below form a part of this Request for Quotations and any resultant contract:

Attch. Title No. of

Pages

01 Picture examples & conceptual drawing (separate attachment) 6

02 OMB Experience and Capability Form (included in this package) 2

NOTE: IN COMPLIANCE WITH THE PAPER REDUCTION ACT, FAR CLAUSES

52.212-3, 52.212-1 AND 52.212-2 AND ADDENDUMS ATTACHED THERETO, WHICH

APPLY ONLY TO THE SOLICITATION PHASE, ARE NOT DUPLICATED AFTER

CONTRACT AWARD. HOWEVER, THEY ARE INCORPORATED BY REFERENCE

INTO THE RESULTING CONTRACT.

"The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or part of an individual’s income is derived from any public assistance program.

(Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA's

TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination, write to

USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, DC 20250-9410, or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer.”

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

SOLICITATION PROVISIONS

FAR 52.252-1 Solicitation Provisions Incorporated by Reference (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

www.acquisition.gov/far/ www.usda.gov/procurement/policy/agar.html

FAR 52.204-7 SYSTEM FOR AWARD MANAGEMENT (JUL 2013)

FAR 52.211-6 BRAND NAME OR EQUAL (Aug 1999)

FAR 52.212-1 INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS (APR 2014)

Addendum to 52.212-1, Address the following items with price quote.

1. Technical Capability – To aid in the evaluation of offeror’s technical capability, the offeror shall include conceptual drawings, technical specifications, key performance characteristics and any other technical information to describe the proposed boat’s ability to meet the requirements of this solicitation. Offeror shall provide any other pertinent data pertaining to the suitability of the proposed design to perform the mission specified in the statement of work and specifications.

Hull design furnished shall have no less than five (5) years of successful open water operations and customer satisfaction. Examples of useful data include data that demonstrates performance of the proposed design in the actual (or similar) mission specified in the statement of work and specifications. Ensure the response addresses overall product capability and operational effectiveness, safety and operator comfort, and warranty coverage. As appropriate, provide evidence of product quality, compliance with certifications for use, safety and reliability with reference to the statement of work.

2. Delivery Schedule – To support the Government’s assessment of the proposed delivery schedule and offeror’s manufacturing capability, offeror shall provide a delivery schedule that includes a work plan indicating the timeline for delivery. The requested delivery date is provided in the description of supplies/services on page 11 of this request for quote. The offeror shall include a statement with regard to their ability to meet the requested delivery date and how the boat will be protected during transport.

3. Past performance. Offeror shall provide three (3) past performance references, on same or similar work as required in this request for quote, completed within the last five (5) years.

Provide information on the attached experience and capability form or on separate sheet addressing all the elements on the form. Past performance information shall be provided for your firm and any proposed major subcontractors performing more than 20% of the work. Past performance information for subcontractors shall be in as much detail as for the prime.

Performance information may be obtained from references provided. Offerors that are newly formed entities, without prior contracts as an entity, should list contracts and subcontracts completed by all personnel deemed vital to successful performance. Firms with no experience in the type of work described may show similar type projects which demonstrate their ability to perform in a timely manner, experience, and past performance of their employees, or their work as a subcontractor.

http://www.arnet.gov/far/ http://www.usda.gov/procurement/policy/agar.html

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

52.212-2 -- Evaluation -- Commercial Items (Oct 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforming to the solicitation will be most advantageous to the

Government, price and other factors considered. The following factors shall be used to evaluate quotes:

1. Technical capability of the item offered to meet the Government’s requirement as stated in the description of supplies/services and specifications. offeror shall demonstrate ability of proposed item to meet all the requirements as listed in the description of supplies/services and specifications. The Forest Service will assess the proposed conceptual design, including materials and conformance to description of supplies/services and specifications.

2. Delivery Schedule. The Forest Service will assess offeror’s proposed delivery schedule, history of quality workmanship, customer satisfaction, timely completion, quality performance, and compliance with contract requirements.

3. Relevant experience: The Forest Service will assess offeror’s experience that is indicative of relevant technical knowledge and ability to perform the work.

4. Past Performance. The Forest Service will assess customer satisfaction on projects of a similar scope.

5. Price.

Technical capability, delivery schedule and past performance, when combined, are significantly more important than price

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the

Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

52.212-3 -- Offeror Representations and Certifications -- Commercial Items. (Mar 2015)

The offeror shall complete only paragraphs (b) of this provision if the Offeror has completed the annual representations and certification electronically via the System for Award Management

(SAM) Web site accessed through http://www.acquisition.gov . If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (p) of this provision.

(a) Definitions. As used in this provision--

“Economically disadvantaged women-owned small business (EDWOSB) concern” means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13

CFR part 127. It automatically qualifies as a women-owned small business eligible under the

WOSB Program.

“Forced or indentured child labor” means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

“Inverted domestic corporation,” means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

“Manufactured end product” means any end product in product and service codes (PSCs) 1000-

9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

http://www.acquisition.gov/

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

“Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

“Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets

Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

REFERENCE NO. OF DOCUMENT BEING CONTINUED

AG-0120-S-15-0014 Updated Thru FAC 2005-79

PAGE

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the

President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

“Service-disabled veteran-owned small business concern”—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran.

(2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16).

“Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and…