SHEET NO.

Cover B

Pedestrian Wayfinding Signage Bid Package Owensboro Wayfinding Signage

Prepared by:

500 SOUTH 17th STREET

PADUCAH, KY 42003

PHONE - 270.443.1995

E N G I N E E R I N G & T E S T I N G , I N C .

BACON | FARMER | WORKMAN

www.bfwengineers.com

Prepared for:

City of Owensboro, Kentucky Lelan Hancock, Asst. City Manager 101 East 4th Street Owensboro, KY 42303

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

NOTE: THIS SET OF DRAWINGS IS INTENDED TO BE PRINTED AND PROVIDED FOR BIDDING IN FULL-COLOR.

BID DOCUMENTS with DESIGN INTENT DRAWINGS | March 17, 2023

DATE: March 17, 2023

REVISION:

DRAWN BY: JEP

Owensboro Wayfinding Signage Project Sheet Index SHEET NO.

Index B

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

SHEET INDEX:

Cover B

Index B Drawing Legend & Sheet Index

Notes & Specifications:

BB-1 Project Colors and Specifications

BB-2 Project Colors and Specifications

Pole-Mounted Signage:

WF-PT Pole-mounted Template

WF-P1 Pole 1, 2nd & Walnut Sts.

WF-P2 Pole 2, 2nd & Cedar Sts.

WF-P3 Pole 3, 2nd & Locust Sts.

WF-P4 Pole 4, 2nd & St. Elizabeth Sts.

WF-P5 Pole 5, 2nd & Frederica Sts.

WF-P6 Pole 6, 2nd & St. Ann Sts.

WF-P7 Pole 7, 2nd & Allen Sts.

WF-P8 Pole 8, 2nd & Daviess Sts.

WF-P9 Pole 9, 3rd & Frederica Sts.

WF-P10 Pole 10, 4th & Frederica Sts.

WF-P11 Pole 11, 5th & Frederica Sts.

Informational Kiosk:

WF-KT Informational Kiosk Template

WF-K1 Kiosk 1, Smothers Park

WF-K2 Kiosk 2, Convention Center

WF-K3 Kiosk 3, Daviess Street Parking Garage

SYMBOLS LEGEND:

X-#

A

SHT.

AA-1

Drawing Keynote (applies to specific sheet only)

Copy Typeface Call-out, Refer to Sheet BB-2

Sign Panel Color & Finish, Refer to Sheet BB-1

Sheet Reference Call-out

Berryjd Rectangle

DRAWN BY: JEP

Owensboro Wayfinding Signage Project Colors and Specifications SHEET NO.

BB-1

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

V-# VINYL

V-1

COLOR NAME SPECIFICATION

V-2

P-# POWDER COATING

P-1

COLOR NAME SPECIFICATION

V-3

SIGNAGE GENERAL NOTES

A. Refer to Sheet BB-2 for additional information pertaining to typeface, spacing and size of typeface, typical.

MATERIAL COLORS/FINISHES

X-#

Light Gray

Dark Gray

White

Gloss Black

3M Scotchcal ElectroCut Opaque Vinyl Film*

Color: RGB 160,161,162; Pantone

Cool Gray 6 C

3M Scotchcal ElectroCut Opaque Vinyl Film*

Color: RGB 124,125,126; Pantone

Cool Gray 9 C

3M Scotchcal ElectroCut Opaque Vinyl Film*

Color: 7725-10 White; RGB 255,255,255

Gloss Exterior Metal Polyester Powdercoat

Color: RGB 15,16,19; RAL 9005

NOTES | COMMENTSNOTES | COMMENTS

NOTES | COMMENTS

Surface applied according to 3M manufacturers specifications*

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Surface applied according to 3M manufacturers specifications*

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Surface applied according to 3M manufacturers specifications*

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

P-2 Gloss Dark Blue

P-3 Gloss Light Blue

P-4 Gloss Light Gray

* Sign fabricator/Contractor shall provide product which meets or exceeds the Specifications for the product listed. Any product(s) provided by the Contractor as an equivalent substitution shall be reviewed for adherence to the specified product performance and be approved or rejected accordingly.

P-5 Gloss Dark Gray

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 5005; Pantone 647 C

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 5015; Pantone 314 C

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 7004; Pantone Cool Gray 6 C

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 7037; Pantone Cool Gray 9 C

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

P-6 Gloss Very Dark Gray

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 7009; Pantone 425 C

P-7 Gloss Light Blue-green

P-8 Gloss Green

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 6034; Pantone 7702 C

Gloss Exterior Metal Polyester Powdercoat

Color: RAL 6018; Pantone 366 C

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

Custom Color: applied to all posts and mounting hardware.

All vinyl and painted surfaces shall receive a compatible anti-graffiti (and U/V) clear coat or vinyl over laminate.

DRAWN BY: JEP

Owensboro Wayfinding Signage Project Colors and Specifications SHEET NO.

BB-2

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

SIGNAGE MATERIALS / COMPONENTS

1. Materials and Components:

A. Aluminum Panels: 1/8" Extruded aluminum, alloy 6063

1). Surface Treatment Finish: As-required for compatible UV Direct to substrate printing system/process. Verification of compatibility between material and finish shall be provided to Owner/Designer.

2). Colors as selected from color palette provided on Sheet BB-1.

B. Digital Electronic Display

1). Exterior, non-touch, commercial-grade, LCD, digital display with custom-programmable messages & images.

a). Mounted within weather-tight aluminum cabinet.

b). Border of screen shall be minimally visible.

2). Wifi accessible - Wirelessly programmable

3). USB media playback

4). Panel Size: 65 inch

5). Brightness : 3000 nit

6). Resolution: 4K (3840 × 2160)

FABRICATION - GENERAL

A. General: Comply with requirements indicated for materials, thickness, finishes, colors, designs, shapes, sizes, and details of fabrication.

B. Allow for thermal movement resulting from a maximum ambient temperature change

(range) of 100 deg F. Design, fabricate, and install sign assemblies to prevent buckling, opening up of joints, and over-stressing of welds and fasteners.

C. Mill joints to a tight, hairline fit. Form joints exposed to the weather to exclude water penetration.

D. Pre-assemble signs in the shop to the greatest extent possible to minimize field assembly. Disassemble signs only as necessary for shipping and handling limitations.

Clearly mark units for reassembly and installation, in a location not exposed to view after final assembly.

E. Conceal fasteners if possible; otherwise, locate fasteners to appear inconspicuous.

Paint fasteners to match adjacent surface(s).

F. Form panels to required size and shape. Comply with requirements indicated for design, dimensions, finish, color, and details of construction.

G. Coordinate dimensions and attachment methods to produce message panels with closely fitting joints. Align edges and surfaces with one another in the relationship indicated.

H. Increase material thickness or reinforce with concealed stiffeners or backing materials as required to produce surfaces without distortion, buckles, warp, or other surface deformations.

EXAMINATION

A. Site Verification of Conditions: Verify installation conditions previously established under other sections are acceptable for product installation in accordance with manufacturer's instructions.

B. Scheduling of installation by Owner or it’s representative implies that substrate and conditions are prepared and ready for product installation. Proceeding with installation implies installer’s acceptance of substrate and conditions.

INSTALLATION

A. Install product in accordance with Fabricator's instructions.

B. Install product in locations indicated using mounting methods recommended by sign manufacturer and free from distortion, warp, or defect adversely affecting appearance.

C. Install product level, plumb, and at heights indicated.

D. Install product at heights to conform to Americans with Disabilities Act Accessibility

Guidelines (ADAAG) and applicable local amendments and regulations.

E. Install signs within the following tolerances and in accordance with Fabricator's recommendations:

1. Within 1 inch vertically and horizontally of intended location.

CLEANING, PROTECTION, AND REPAIR

A. Repair scratches and other damage which might have occurred during installation.

Replace components where repairs were made but are still visible to the unaided eye from a distance of 5 feet.

B. Remove temporary coverings and protection to adjacent work areas. Clean installed products in accordance with manufacturer's instructions prior to Owner's acceptance.

Remove construction debris from project in accordance.

SIGN SCHEDULES

A. Schedule: Refer to signage schedules and Drawings for sizes, locations, and layout of signage types, sign text copy, and graphics.

Materials and Installation Specifications

LOGO: COLOR PALETTE

SCALE: NOT TO SCALE

TYPEFACE

TYPEFACE A

Font name: Romantic Version: Linguist's Software Romantic 2.0 generated with Altsys Fontographer 4.1 9/17/96 TrueType Outlines abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890.:,; ' " (!?) +−*/=

The quick brown fox jumps over the lazy dog.

1234567890

Font name: ITC Kabel Medium Version: Converter: Windows Type 1 Installer V1.0d. Font: V1.1 TrueType Outlines abcdefghijklmnopqrstuvwxyz ABCDEFGHIJKLMNOPQRSTUVWXYZ 1234567890.:,; ' " (!?) +- */=

The quick brown fox jumps over the lazy dog.

1234567890

TYPEFACE B

X

SIGNAGE GENERAL NOTES

A. Refer to Sheet BB-1 for additional information pertaining to typeface colors and materials, typical.

B. When measuring copy height, measure only the height of the Capital letters to determine height of copy. Some typeface produces letters that have extended height beyond the average letter height.

C. When measuring line spacing, measurements shall be from the baseline of the top-most text line to the baseline of the text line below.

D. Text spacing - Individual spacing of each letter shall be evaluated by Owner. Kern all copy so that each letter is visually centered between each of the adjacent characters, typical.

P-5

P-6

P-6

P-7

P-2

P-8

P-5

P-2

P-7

P-8

P-5

P-2

P-8

P-6

P-7

P-2

P-5

A

B

3'

Back FaceFront Face

3'

* 65" Screen *

7'

1"

1"

2'-8"

4 1/2"

4"

1"

2" 2"

6"

7'

6"

1"

1"

2 1/2" 2 1/2"

8"

6"

Top View

3'

3'-1"

6"

6 1/2"

2 1/2"

3'

3'-1"

2'-10" 2'-10"

4"4" 6"

6 1/2"

6"

6 1/2"

5'-8"

1" 1"1" 1"

Top View Right Side View

Left Side View

Information 2"

3"

3"

4'-9"

5'-3" www. .org For Information: (270) 687-4444

2'-6" 2'-6" 2'-6"

6"

Per Code

PEDESTRIAN WAYFINDING - Informational Kiosk Template

Owensboro Wayfinding Signage

SHEET NO.

WF-KT

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

Kiosk with Digital Display Panel

#SIGNAGE KEYNOTES

1. Aluminum cabinet with direct-to-substrate, UV-resistant, digitally printed background and graphics on 1/8" aluminum panel with, or approved equivalent finish, see Materials and Installation

Specifications, Sheet BB-2 . Colors shall be approved by Owner/Designer prior to acceptance.

2. Applied vinyl message and directional arrows, see Sheet WF-K1 .

3. 1/4" Layered aluminum panel applied to face of aluminum sign/electrical cabinet; Break-form bend with single panel; Mechanically fasten to cabinet with concealed screws/fasteners painted to match.

4. Lettering style/font for message shall be "ITC Kabel Medium", see Sheet BB-2 .

5. 6" exposed concrete base with concrete footing. Contractor shall provide footing design(s), typical.

See General Notes.

6. Provide code-compliant electrical service to digital Kiosk cabinet as required. Owner shall supply electrical supply access to fabricator. Contractor shall coordinate work with City of Owensboro.

7. Exterior, Wifi Compatible, non-touch, commercial-grade, LCD, digital display. Refer to Materials and Installation specifications on Sheet BB-2 , typical. Digital graphics software shall be provided by signage fabricator to be compatible with new digital display. Confirm applicability and compatibility with Owner and/or Owner's graphic designer.

DATE: March 17, 2023

REVISION:

DRAWN BY: JEP

P-2

P-3 P-2

P-5

P-4

P-5

P-4

P-2

P-3

V-3

GENERAL SIGNAGE NOTES

A. Sign Contractor shall be responsible for design and engineering of supports, anchors

(including selection of compatible breakaway anchors), concrete footings, mounting brackets, and miscellaneous steel or metal required for installation.

B. Sign Contractor must provide shop drawings for all structural components, signed and sealed by a licensed engineer in the State of the project.

C. The Sign Contractor’s structural engineer shall be licensed in the Commonwealth of

Kentucky and certify all anchors, connections, and support details are in compliance with with Local/State regulations and MUTCD, current edition.

D. Fabricator to verify the mounting conditions and provide a detail drawing for each mounting situation, prior to fabrication.

E. Fabricator must obtain approval from the Designer or Client for placement prior to fabrication.

F. Isolate dissimilar materials as required.

G. Field dimensions shall be taken by the Sign Contractor prior for preparation of shop drawings and fabrication where possible. It is the responsibility of the Sign Contractor to field-verify all sign locations for accuracy, fit, and potential obstacles. Sign Contractor shall notify appropriate person(s) of any issues, discrepancies and potential obstacles per the following drawing sheets, Specifications, contract or specified communication process.

H. It is the responsibility of the Sign Contractor to contact “Call Before You Dig” and verify locations of underground utilities prior to beginning excavation/installation.

I. Sign Contractor must obtain all permits and field inspection approvals necessary to complete work per City/State requirements. All sign locations need to be located and staked by Sign Contractor and approved by City Engineer prior to installation.

J. Concrete footing dimensions are approximate. Final dimensions must appear on shop drawings for review and approval.

K. Sign Contractor shall follow any additional requirements as presented within these Design

Intent Documents & Specifications, typical.

L. All exposed hardware shall be tamper proof in nature.

M. Signs shall be located so as not to interfere with, obstruct or divert driver’s attention from any other Official Traffic Control Device (OTCD). Other OTCD's placed at intersection approaches, subsequent to the placement of a wayfinding sign, shall have precedence as to location and may require the relocation of the wayfinding sign. In the locations where OTCD's are integrated into the wayfinding signage System, the OTCD's shall take precedence with regard to order, space and location, over other information.

N. Wayfinding signs shall be positioned in such a manner that does not restrict driver’s attention or view when making turns or driving through an intersection.

O. The Sign Contractor shall be responsible for performing all necessary traffic control measures in accordance with MUTCD as required for sign/foundation installation.

P. All vinyl, powdercoated, and painted surfaces must receive a compatible anti-graffiti (and

U/V) clear coat or vinyl over laminate.

Q. In general, new signs shall replace existing signs in their present locations and orientations.

Coordinate and verify locations of signs/kiosks with Owner/City of Owensboro, Engineering

Department prior to demolition and construction.

3 3

A

B

P-5

P-3

1 1

Information

Per Code

PEDESTRIAN WAYFINDING - Kiosk 1, Smothers Park

Owensboro Wayfinding Signage

SHEET NO.

WF-K1

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

Kiosk with Digital Display Panel

DATE: March 17, 2023

REVISION:

DRAWN BY: JEP

LOCATION PLAN

#SIGNAGE KEYNOTES

1. Demolish and remove existing sign, sign footings, and associated elements.

2. Provide new concrete sign base & footing per Sheet WF-KT upon removal of existing sign and footings.

3. Provide electrical service connection to existing service via buried electrical conduit as required to meeting local and/or national electrical codes (whichever is more stringent), typical. Coordinate work with Owner/City of Owensboro.

4. Verify locations and presence of underground utilities prior to excavation and demolition by contacting

KY 811 more than 5 days in advance of work.

5. Verify locations and presence of underground utilities prior to excavation and demolition by contacting

KY 811 more than 5 days in advance of work.

6. Coordinate and verify locations of signs/kiosks with Owner/City of Owensboro, Engineering Department prior to demolition and construction.

5 6

PEDESTRIAN WAYFINDING - Kiosk 2, Convention Center

Owensboro Wayfinding Signage

SHEET NO.

WF-K2

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

Kiosk with Digital Display Panel

DATE: March 17, 2023

REVISION:

DRAWN BY: JEP

LOCATION PLAN

#SIGNAGE KEYNOTES

1. Saw-cut and remove existing concrete paving cleanly in rectangular-shape. Demolish and remove existing sign (located to West of new location), sign footings, and associated elements.

2. Provide new concrete sign base & footing per Sheet WF-KT - Verify location and orientation of new sign with Owner prior to construction, typical.

3. Provide new concrete sidewalk paving with compacted dense grade aggregate base to meet or exceed

City of Owensboro standards for sidewalks.

4. Install new standard-duty concrete sidewalk paving flush to face of sign base/footing, typical.

5. Provide electrical service connection to existing service via buried electrical conduit as required to meeting local and/or national electrical codes (whichever is more stringent), typical. Coordinate work with Owner/City of Owensboro.

6. Verify locations and presence of underground utilities prior to excavation and demolition by contacting

KY 811 more than 5 days in advance of work.

7. Coordinate and verify locations of signs/kiosks with Owner/City of Owensboro, Engineering Department prior to demolition and construction.

PEDESTRIAN WAYFINDING - Kiosk 3, Daviess St. Garage

Owensboro Wayfinding Signage

SHEET NO.

WF-K3

BACON | FARMER | WORKMAN

ENGINEERING & TESTING, INC.

NOT FOR CONSTRUCTION!

These drawings are for the sole purpose of expressing visual DESIGN INTENT ONLY and are not intended for actual fabrication purposes. The Sign Contractor shall verify and be responsible for all dimensions and conditions of the job and shall accept full responsibility for final material selection, fabrication, and installation methods. Electronic files are not construction documents and shall not be relied upon as identical to construction documents because of changes or errors induced by translation, transmission, or alterations while under the control of others. Use of information contained in the electronic files is at the user’s sole risk and without liability to Design Professional and its consultants. Shop drawings and details shall be submitted to the Owner for approval prior to proceeding with fabrication. All copy shall be proofread by Owner and approved for compliance with local and/or state laws. Copyright © Bacon Farmer Workman Engineering & Testing, Inc. All rights reserved.

Kiosk with Digital Display Panel

#SIGNAGE KEYNOTES

1. Remove existing brick pavers. Demolish and remove existing sign, sign footings, and associated elements.

2. Provide new concrete sign base & footing per Sheet WF-KT - Verify location and orientation of new sign with Owner prior to construction, typical .

3. Provide new concrete paver base and setting bed with compacted dense grade aggregate paving base to meet or exceed City of Owensboro standards for sidewalks.

4. Cut and re-install pavers flush to face of sign base/footing, typical.

5. Provide electrical service connection to existing service via buried electrical conduit as required to meeting local and/or national electrical codes (whichever is more stringent), typical. Coordinate work with Owner/City of Owensboro.

6. Verify locations and presence of underground utilities prior to excavation and demolition by contacting

KY 811 more than 5 days in advance of work.

7. Coordinate and verify locations of signs/kiosks with Owner/City of Owensboro, Engineering Department prior to demolition and construction.

DATE: March 17, 2023

REVISION:

DRAWN BY: JEP

LOCATION PLAN