Attachment_3-Final_ESL_Snow_Melt_Dwg_2.27.18.pdf

PDF 3 MB Posted Mar 4, 2019

Attached to: USMS Security Barrier Replacement Federal contract opportunity
Solicitation number: 47PF0019R0010
Issued by: General Services Administration Public Buildings Service Region 5

About this file

From the source

Attachment 3-Amendment 01-Snow Melt DWGS

View the file

Other files for this federal contract opportunity

Other files attached to USMS Security Barrier Replacement, newest first.
File	Type	Posted
Attachment_3-Updated_SF1442-14b.pdf	PDF	Mar 20, 2019
Amendment_03-Updated_Snow_Melt_Dwgs_and_Cost_Breakdown.pdf	PDF	Mar 20, 2019
Attachment_1-ESL_Snow_Melt_Dwg_Add._2_Final_3.14.19_(1).pdf	PDF	Mar 20, 2019
Attachment_2-Revise_Contract_Price_Form.docx	DOCX document	Mar 20, 2019
Amendment_02-ESL_USMS_Security_Barrier.pdf	PDF	Mar 14, 2019
Amendment_01-USMS_Security_Barrier_Replacement-GC-1.pdf	PDF	Mar 4, 2019
Attachment_2-GSA_Security_Barrier_Replacement_Div_22_&_23_Specs.pdf	PDF	Mar 4, 2019
Attachment_1-GSA_Security_Barrier_Upgrade_Rev._1_Construction_Documents_-_Plans.pdf	PDF	Mar 4, 2019
H1-Final_Construction_Documents_-_Plans_USMS_Sec_Barrier.pdf	PDF	Feb 5, 2019
RFP_47PF00-19R-0010.pdf	PDF	Feb 5, 2019
H2-Final_Construction_Documents_-_Specifications_USMS_Sec_Barrier.pdf	PDF	Feb 5, 2019

Show all 11

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SCHEDULE OF PLUMBING FIXTURES AND CONNECTIONSRDL

GREAT LAKES REGION 5

PROPERTY OF THE

UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

SHEET OF

DISCIPLINE

DRAWING NO.

DRAWN BYDATE

PCN NO.

GSA PM

PROJ. DESC.

BLDG NO.

CITY/ST./ZIP

STREET

BLDG NAME

MARK

FLOOR NO.

DATEDESCRIPTION

REVISION

TITLE

GENERAL SERVICES ADMINISTRATION

SHEET DESIGNATOR

SENSITIVE BUT UNCLASSIFIED (SBU) - PROPERTY OF THE UNITED STATES GOVERNMENT. COPYING, DISSEMINATION, OR DISTRIBUTION OF THESE DRAWINGS, PLANS, OR SPECIFICATIONS TO UNAUTHORIZED PERSONS IS PROHIBITED. Do not remove this notice. Properly destroy documents when no longer needed.

SHEET SIZE

SUB A/E

PRIME A/E

CONS. CONTR.

A/E CON. NO.

C O N

A C

R S

CONSTR. CON.

A/E TASK NO.

CONS. WORK

CONTRACTOR INFO

MELVIN-PRICE FEDERAL BUILDING

BRETT ETLING

905 North Capital Avenue, Suite 100 Indianapolis, IN 46204 www.guidondesign.com

IL0301ES

750 EAST MISSOURI AVE.

EAST SAINT LOUIS

GSA SECURITY UPGRADE

02-27-2019

30x42

IL 62201

GS-05-P-17-SC-D-0001

47PF-0018F-0230

GUIDON BCCLT JV LLC

RIL11680

P-1-01

IAM J. HOSMON

STATE OF ILLINO

62-57780 registered professional engineer of

02-27-19

AutoCAD SHX Text

AutoCAD SHX Text 253.00'(R)

AutoCAD SHX Text X

AutoCAD SHX Text G

AutoCAD SHX Text

EX. 4"

AutoCAD SHX Text G

AutoCAD SHX Text

AutoCAD SHX Text PIPING TO BE INSTALLED ABOVE LAY-IN CEILING. CONTRACTOR SHALL REMOVE AND REINSTALL CEILING TILES AS NECESSARY FOR INSTALLATION OF PIPES, ANY DAMAGED CEILING TILES SHALL BE REPLACED.

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text PIPING TO BE INSTALLED ABOVE GYP. BOARD CEILING. CONTRACTOR SHALL REMOVE AND REPLACE (FIRE RATED) CEILING INCLUDING FINISHING, PRIMING, AND PAINTING TO MATCH AS NECESSARY FOR INSTALLATION OF PIPES.

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text 2"

AutoCAD SHX Text

%%UHB1

AutoCAD SHX Text 34" CW-DN TO HOSE BIB. PROVIDE CHEMELEX 5BTV-1-CT OR EQUAL 120V, 5W/FT HEAT TRACING (SELF-REGULATING) ON EXPOSED PIPE BETWEEN THE CEILING AND THE HOSE BIB. HEAT TRACING TO INCLUDE JUNCTION BO, AMBIENT TEMPERATURE SENSOR, AND SEAL, AND INSULATION INSTALLED TO MANUFACTURER'S RECOMMENDATIONS. PROVIDE CURRENT SENSOR FOR MONITORING OF HEAT TRACE OPERATION MONITORING AT FRONT END BMS.

AutoCAD SHX Text

EX. 3"

AutoCAD SHX Text

EX. 2"

AutoCAD SHX Text

EX. 2"

AutoCAD SHX Text

EX. 2"

AutoCAD SHX Text

EX. 3"

AutoCAD SHX Text

GAS VENT TERMINATION (SEE DETAIL)

AutoCAD SHX Text

34" G-DN TO BOILER

AutoCAD SHX Text

BOILER

AutoCAD SHX Text

EXPANSION TANK

AutoCAD SHX Text

HYDRONIC PUMPS

AutoCAD SHX Text

AIR SEPARATOR

AutoCAD SHX Text

GLYCOL FEEDER

AutoCAD SHX Text

GAS PRV. SEE DETAIL

AutoCAD SHX Text

AutoCAD SHX Text 2"

AutoCAD SHX Text 34"

AutoCAD SHX Text 12"

AutoCAD SHX Text

EX. 1 "12"

AutoCAD SHX Text

FAUCET / VALVE

AutoCAD SHX Text

DRAIN

AutoCAD SHX Text

DOMESTIC

AutoCAD SHX Text

DOMESTIC

AutoCAD SHX Text

SANITARY

AutoCAD SHX Text

WASTE

AutoCAD SHX Text

SANITARY

AutoCAD SHX Text

VENT

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

SUPPLY STOPS

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

AND MODEL

AutoCAD SHX Text

DOMESTIC

AutoCAD SHX Text

MARK

AutoCAD SHX Text

TAILPIECE

AutoCAD SHX Text

P-TRAP

AutoCAD SHX Text

SIZE

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

CENTERS

AutoCAD SHX Text

HANDLES

AutoCAD SHX Text

SPOUT

AutoCAD SHX Text

MARK

AutoCAD SHX Text

FIXTURE

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text

STYLE

AutoCAD SHX Text

MANUFACTURER & MODEL

AutoCAD SHX Text

HB1

AutoCAD SHX Text

HOSE BIBB

AutoCAD SHX Text

WALL MOUNT

AutoCAD SHX Text

CHROME PLATED SOLID BRASS

AutoCAD SHX Text

LOOSE KEY

AutoCAD SHX Text

AutoCAD SHX Text CERAMIC 1/4 TURN OPERATING CARTRIDGE. PROVIDE VACUUM BREAKER. MOUNT 18" ABOVE FINISHED FLOOR.

AutoCAD SHX Text

HB1

AutoCAD SHX Text 34"

AutoCAD SHX Text

ZURN

AutoCAD SHX Text Z875L7

AutoCAD SHX Text

PLUMBING_PLAN_NEW_WORK

AutoCAD SHX Text

TRC

AutoCAD SHX Text L1

AutoCAD SHX Text

MECH

AutoCAD SHX Text P101

AutoCAD SHX Text

SCALE: Ê" = 1'-0"

AutoCAD SHX Text

%%UPLUMBING PLAN

AutoCAD SHX Text

SECURITY GATE BACK-UP POWER INVERTER

AutoCAD SHX Text

EX. DOOR CONTROLS

AutoCAD SHX Text

CONNECTION POINT-

AutoCAD SHX Text

END CAP

AutoCAD SHX Text

NEW TO EXISTING

AutoCAD SHX Text

BRANCH CONNECTION

AutoCAD SHX Text

VALVE IN VERTICAL

AutoCAD SHX Text

RISER DOWN

AutoCAD SHX Text

RISER UP

AutoCAD SHX Text

RISER OR DROP

AutoCAD SHX Text

FLOW-IN DIRECTION

AutoCAD SHX Text

OF ARROW

AutoCAD SHX Text

UNION

AutoCAD SHX Text

SHUT-OFF VALVE

AutoCAD SHX Text

%%USYMBOLS

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text

DOMESTIC COLD WATER

AutoCAD SHX Text

NATURAL GAS

AutoCAD SHX Text

WATER HAMMER ARRESTOR

AutoCAD SHX Text A

AutoCAD SHX Text

PRESSURE REDUCING VALVE

AutoCAD SHX Text

KEY NOTE

AutoCAD SHX Text

%%UABBREVIATION

AutoCAD SHX Text

%%UPLUMBING LEGEND

AutoCAD SHX Text

DOMESTIC COLD WATER

AutoCAD SHX Text

EXISTING

AutoCAD SHX Text

NATURAL GAS

AutoCAD SHX Text

AutoCAD SHX Text G

AutoCAD SHX Text

RELIEF VENT

AutoCAD SHX Text

REDUCED PRESSURE BACKFLOW

AutoCAD SHX Text

RPBP

AutoCAD SHX Text

PREVENTER

AutoCAD SHX Text

VENT

AutoCAD SHX Text

HOSE BIBB

AutoCAD SHX Text

HOSE BIBB

AutoCAD SHX Text

%%UPIPE SLEEVE DETAIL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

PIPE

AutoCAD SHX Text

SEAL

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

%%UEXTERIOR WALL

AutoCAD SHX Text

CORE DRILL

AutoCAD SHX Text

WALL

AutoCAD SHX Text A

AutoCAD SHX Text

PROVIDE ACCESS PANEL FOR WATER HAMMER ARRESTOR.

AutoCAD SHX Text

*ZURN MODELS ARE FOR MINIMUM QUALITY.

AutoCAD SHX Text

WATER HAMMER ARRESTER SCHEDULE

AutoCAD SHX Text

AutoCAD SHX Text 155-330

AutoCAD SHX Text F

AutoCAD SHX Text

AutoCAD SHX Text 114-154

AutoCAD SHX Text E

AutoCAD SHX Text

AutoCAD SHX Text 61-113

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text 33-60

AutoCAD SHX Text C

AutoCAD SHX Text

AutoCAD SHX Text 12-32

AutoCAD SHX Text B

AutoCAD SHX Text 1-11

AutoCAD SHX Text A

AutoCAD SHX Text

IDENTIFICATION

AutoCAD SHX Text

SERIES Z-1700

AutoCAD SHX Text

*ZURN MODEL

AutoCAD SHX Text

FIXTURE UNITS

AutoCAD SHX Text

ARRESTER

AutoCAD SHX Text

WATER HAMMER

AutoCAD SHX Text

%%UGAS VENT TERMINATION DETAIL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

TURN PIPING DOWN TOWARDS GROUND

AutoCAD SHX Text

GAS VENT FROM PRV OR GAS TRAIN

AutoCAD SHX Text

SEE EXTERIOR WALL PIPE SLEEVE DETAIL.

AutoCAD SHX Text

WALL

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

INDOOR INSTALLATION

AutoCAD SHX Text

%%UGAS PRV INSTALLATION DETAIL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text NPS 2 AND SMALLER: GAS BALL VALVE, NPS 2 AND LARGER: 12 AND LARGER: GAS PLUG VALVE

AutoCAD SHX Text

Y-STRAINER

AutoCAD SHX Text

BUILDING ENVELOP

AutoCAD SHX Text

VENT TERMINATION (SEE GAS VENT TERMINATION DETAIL)

AutoCAD SHX Text

VENT PRV TO THE OUTSIDE, WHERE APPLICABLE

AutoCAD SHX Text

38" NIPPLE AND GAS BALL VALVE WITH CAP FOR PRESSURE GAGE ATTACHMENT (TYP)

AutoCAD SHX Text

REFERENCE FLOOR PLANS FOR PIPE SIZE

AutoCAD SHX Text

REDUCED PRESSURE

AutoCAD SHX Text

SUPPLY PRESSURE

AutoCAD SHX Text

BRASS BUG SCREEN SECURED WITH STAINLESS STEEL CLAMP

AutoCAD SHX Text

STRAINER

AutoCAD SHX Text

NATURAL GAS VENT

AutoCAD SHX Text

GAS COCK

AutoCAD SHX Text

STAINLESS STEEL ESCUTCHEON.

PROPERTY OF THE

UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

SHEET OF

DISCIPLINE

DRAWING NO.

DRAWN BYDATE

PCN NO.

GSA PM

PROJ. DESC.

BLDG NO.

CITY/ST./ZIP

STREET

BLDG NAME

MARK

FLOOR NO.

DATEDESCRIPTION

REVISION

TITLE

GENERAL SERVICES ADMINISTRATION

SHEET DESIGNATOR

SHEET SIZE

SUB A/E

PRIME A/E

CONS. CONTR.

A/E CON. NO.

C O N

A C

R S

CONSTR. CON.

A/E TASK NO.

CONS. WORK

CONTRACTOR INFO

MELVIN-PRICE FEDERAL BUILDING

BRETT ETLING

905 North Capital Avenue, Suite 100 Indianapolis, IN 46204 www.guidondesign.com

IL0301ES

750 EAST MISSOURI AVE.

EAST SAINT LOUIS

GSA SECURITY UPGRADE

02-27-2019

30x42

IL 62201

GS-05-P-17-SC-D-0001

47PF-0018F-0230

GUIDON BCCLT JV LLC

RIL11680

IAM J. HOSMON

STATE OF ILLINO

62-57780

02-27-19 registered professional engineer of

AutoCAD SHX Text

8TH STREET

AutoCAD SHX Text

PWP

AutoCAD SHX Text

DN.

AutoCAD SHX Text J

AutoCAD SHX Text X

AutoCAD SHX Text ALERTON CONTROL FOR AHU-6LL. CONNECT SNOW MELT CONTROL PANEL VIA BACNET MSTP TO AHU-6LL ALTERON CONTROL FOR CONNECTION TO EXISTING FRONT END BMS JACE LOCATED IN THE TOP FLOOR ATRIUM.

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text M

AutoCAD SHX Text

PARKING GARAGE

AutoCAD SHX Text T

AutoCAD SHX Text X

AutoCAD SHX Text H

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text J

AutoCAD SHX Text H

AutoCAD SHX Text M

AutoCAD SHX Text

PARKING GARAGE

AutoCAD SHX Text

GUARD

AutoCAD SHX Text

SHACK

AutoCAD SHX Text T

AutoCAD SHX Text

MECHANICAL_DETAILS_NEW_WORK

AutoCAD SHX Text

TRC

AutoCAD SHX Text L1

AutoCAD SHX Text

MECH

AutoCAD SHX Text M101

AutoCAD SHX Text

%%UB-1

AutoCAD SHX Text

%%UP-2

AutoCAD SHX Text

%%UET-1

AutoCAD SHX Text

%%UP-1

AutoCAD SHX Text

SEE PIPING DIAGRAM FOR CONTINUATION

AutoCAD SHX Text

%%UGF-1

AutoCAD SHX Text

SNOW MELT CONTROL PANEL

AutoCAD SHX Text 1 " STAINLESS STEEL MANIFOLD PROVIDED WITH SNOW 12" STAINLESS STEEL MANIFOLD PROVIDED WITH SNOW MELT SYSTEM CONTRACTOR TO PROVIDE 31"x27"x5" NEMA 4 WEATHER RESISTANT ENCLOSURE. CONCEAL TUBES WITH LINE SET COVERS FROM THE ENCLOSURE TO GRADE.

AutoCAD SHX Text

1Ð"HWS&R

AutoCAD SHX Text SNOW MELT SYSTEM " RADIANTPEX+ BARRIER TUBING SPACED 34" RADIANTPEX+ BARRIER TUBING SPACED AT 12" O.C. PROVIDED WITH 1 " STAINLESS STEEL MANIFOLD. 12" STAINLESS STEEL MANIFOLD. COORDINATE TUBING WITH SENSOR LOOP WIRE JUNCTION BOXES WITH ELECTRICAL CONTRACTOR PRIOR TO TUBING ROUGH-IN. FLEX TUBING AROUND JUNCTION BOXES AS REQUIRED. DETAILS OF SNOW MELT SYSTEM SHALL CONFORM TO MANUFACTURER'S REQUIREMENTS.

AutoCAD SHX Text PHASE INSTALLATION SO ONE LANE IS ALWAYS OPEN. WHEN INSTALLING THE FIRST LANE, LEAVE 18" WIDE OPENING IN BETWEEN LANES FOR COILS TO EXIT. STORE COILS HERE UNTIL THE SECOND LANE DEMO IS COMPLETE.

AutoCAD SHX Text

SCALE: Ê" = 1'-0"

AutoCAD SHX Text

%%UHVAC PIPING PLAN

AutoCAD SHX Text

%%UAS-1

AutoCAD SHX Text ROUTE " RADIANTPEX+ BARRIER TUBING FROM 34" RADIANTPEX+ BARRIER TUBING FROM DRIVEWAY LOOPS TO MANIFOLD (TYP.OF 12). COORDINATE BURIED TUBING WITH POWER CONDUIT AND COMMUNICATION CONDUITS. REFERENCE ELECTRICAL DRAWINGS

AutoCAD SHX Text

MOISTURE SENSOR

AutoCAD SHX Text

SEE ENLARGED PLAN ON THIS SHEET

AutoCAD SHX Text

SCALE: Ì" = 1'-0"

AutoCAD SHX Text

%%UHVAC ENLARGED PLAN

AutoCAD SHX Text

3" AIR INTAKE AND VENT TO FLUSH MOUNT VENT KIT

AutoCAD SHX Text

SECURITY BARRIER

AutoCAD SHX Text

VEHICLE DETECTION LOOP, TYP.

AutoCAD SHX Text

BOLLARD, TYP.

AutoCAD SHX Text

REFER TO CIVIL PLANS FOR ADDITIONAL INFORMATION ON SLAB CONSTRUCTION

AutoCAD SHX Text

SECURITY BARRIER

AutoCAD SHX Text

OUTDOOR TEMPERATURE SENSOR

AutoCAD SHX Text

SECURITY GATE BACK-UP POWER INVERTER

AutoCAD SHX Text

EX. DOOR CONTROLS

AutoCAD SHX Text

TRENCH DRAIN

AutoCAD SHX Text

ELECTRICAL JUNCTION BOX (TYP.)

AutoCAD SHX Text

%%UUNDERSLAB AND EDGE INSULATION DETIAL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

GRADE

AutoCAD SHX Text

COMPACTED GRADE - SEE

AutoCAD SHX Text

CONCRETE SLAB - SEE ARCHITECTURAL

AutoCAD SHX Text

ARCHITECTURAL DRAWINGS

AutoCAD SHX Text

1" THICK EDGE

AutoCAD SHX Text

ARCHITECTURAL DRAWINGS FOR DETAILS.

AutoCAD SHX Text

1" THICK UNDER-

AutoCAD SHX Text

SLAB INSULATION

AutoCAD SHX Text

INSULATION

AutoCAD SHX Text

PEX TUBING

AutoCAD SHX Text

FOAM BOARD STAPLES

AutoCAD SHX Text

SPACE 18" ON CENTER

AutoCAD SHX Text

%%UEXPANSION JOINT DETAIL

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

COMPACTED GRADE - SEE

AutoCAD SHX Text

12" PIPE WRAP SLEEVE

AutoCAD SHX Text

ARCHITECTURAL DRAWINGS FOR DETAILS.

AutoCAD SHX Text

1" THICK RIGID UNDER-

AutoCAD SHX Text

SLAB INSULATION

AutoCAD SHX Text

PEX TUBING

AutoCAD SHX Text

FOAM BOARD STAPLES

AutoCAD SHX Text

SPACE 18" ON CENTER

AutoCAD SHX Text

CONCRETE SLAB - SEE

AutoCAD SHX Text

ARCHITECTURAL DRAWINGS

AutoCAD SHX Text

FOR DETAILS.

AutoCAD SHX Text

EXPANSION JOINT - SEE ARCHITECTURAL

AutoCAD SHX Text

1/2" SEALANT

DRAWINGS FOR DETAILS.

PROPERTY OF THE

UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

SHEET OF

DISCIPLINE

DRAWING NO.

DRAWN BYDATE

PCN NO.

GSA PM

PROJ. DESC.

BLDG NO.

CITY/ST./ZIP

STREET

BLDG NAME

MARK

FLOOR NO.

DATEDESCRIPTION

REVISION

TITLE

GENERAL SERVICES ADMINISTRATION

SHEET DESIGNATOR

SHEET SIZE

SUB A/E

PRIME A/E

CONS. CONTR.

A/E CON. NO.

C O N

A C

R S

CONSTR. CON.

A/E TASK NO.

CONS. WORK

CONTRACTOR INFO

MELVIN-PRICE FEDERAL BUILDING

BRETT ETLING

905 North Capital Avenue, Suite 100 Indianapolis, IN 46204 www.guidondesign.com

IL0301ES

750 EAST MISSOURI AVE.

EAST SAINT LOUIS

GSA SECURITY UPGRADE

02-27-2019

30x42

IL 62201

GS-05-P-17-SC-D-0001

47PF-0018F-0230

GUIDON BCCLT JV LLC

RIL11680

IAM J. HOSMON

STATE OF ILLINO

62-57780 registered professional engineer of

02-27-19

AutoCAD SHX Text

SCHEDULE OF BOILER

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

HEATING MBH CAPACITY INPUT

AutoCAD SHX Text

HEATING MBH CAPACITY OUTPUT

AutoCAD SHX Text

ELECTRICAL CHARACTERISTICS

AutoCAD SHX Text

NOTES

AutoCAD SHX Text B-1

AutoCAD SHX Text

LAARS

AutoCAD SHX Text

NEOTHERM

AutoCAD SHX Text

AutoCAD SHX Text 120/1

AutoCAD SHX Text 1,2,3

AutoCAD SHX Text NOTES: 1. PROVIDE WITH SINGLE POINT POWER CONNECTION. 2. PROVIDE WITH FLUSH MOUNT VENT KIT. 3. PROVIDE WITH FACTORY MOUNTED BACNET CONTROLS.

AutoCAD SHX Text

SCHEDULE OF EXPANSION TANK

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

USAGE

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

ACCEPTANCE VOLUME

AutoCAD SHX Text

TOTAL VOLUME

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

ET-1

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

WATTS

AutoCAD SHX Text

ETSX-30

AutoCAD SHX Text

AutoCAD SHX Text 1,2,3

AutoCAD SHX Text NOTES: 1. CHARGE TO 12 PSI. 2. TANK SHALL BE ASME DIAPHRAM TANK. 3. MAXIMUM PRESSURE: 75 PSI @ 220° F.

AutoCAD SHX Text

SCHEDULE OF GLYCOL FEED SYSTEM

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

TANK GALLONS

AutoCAD SHX Text

ELECTRICAL CHARACTERISTICS

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

GF-1

AutoCAD SHX Text

WESSELS

AutoCAD SHX Text G-Series

AutoCAD SHX Text

AutoCAD SHX Text 110V

AutoCAD SHX Text 1,2,3,4

AutoCAD SHX Text NOTES: 1. PROVIDE ALARM KIT WITH GLYCOL FEED PANEL, FLOAT AND ALARM CONTACT CLOSURE FOR USE WITH REMOTE ALARM TO BMS SYSTEM. 2. PROVIDE WITH WALL MOUNTING SHELF 3. PANEL SHALL BE FACTORY MOUNTED TO STORAGE TANK. ALL INTERCONNECTING CONTROLS, CONDUITS AND OTHER REQUIRED COMPONENTS SHALL BE PROVIDED FOR A COMPLETE OPERABLE SYSTEM. 4. GLYCOL FEED SYSTEM SHALL MAINTAIN 40% GLYCOL SOLUTION.

AutoCAD SHX Text

SCHEDULE OF PUMPS

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

SERIES

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

GPM

AutoCAD SHX Text

HEAD/FOOT

AutoCAD SHX Text

MOTOR W

AutoCAD SHX Text

ELECTRICAL CHARACTERISTICS

AutoCAD SHX Text

SHAFT SEALS

AutoCAD SHX Text

NOTES

AutoCAD SHX Text P-1

AutoCAD SHX Text

ARMSTRONG

AutoCAD SHX Text

ASTRO 2

AutoCAD SHX Text

268 CI

AutoCAD SHX Text

AutoCAD SHX Text 115/1

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

AutoCAD SHX Text P-2

AutoCAD SHX Text

ARMSTRONG

AutoCAD SHX Text

ASTRO 2

AutoCAD SHX Text

268 CI

AutoCAD SHX Text

AutoCAD SHX Text 115/1

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

SCHEDULE OF AIR SEPERATOR

AutoCAD SHX Text

SYMBOL

AutoCAD SHX Text

USAGE

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL

AutoCAD SHX Text

SIZE

AutoCAD SHX Text

CAPACITY

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

AS-1

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

WATTS

AutoCAD SHX Text

AS-MB

AutoCAD SHX Text 1.25

AutoCAD SHX Text 23.1

AutoCAD SHX Text

AutoCAD SHX Text T/P

AutoCAD SHX Text

DRAIN VALVE

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

%%UHOT WATER FLOW DIAGRAM & CONTROLS

AutoCAD SHX Text

%%UP-1

AutoCAD SHX Text

%%UP-2

AutoCAD SHX Text

%%UET-1

AutoCAD SHX Text

%%UB-1

AutoCAD SHX Text

CONTROL PANEL CONNECT TO WALL RECEPTICLE

AutoCAD SHX Text

VALVE (TYP.)

AutoCAD SHX Text ONE (1) GAS HOT WATER BOILER (1) SAFETY RELIEF VALVE AT 100 PSI. (1) WATER LEVEL. PROBE-TYPE AUXILIARY LOW WATER CUT-OFF WITH MANUAL RESET. (1) AQUASTATL, 120°F TO 240°F, HIGH LIMIT, AUTO RE-SET.(1) AQUASTATL, 110°F TO 290°F, HIGH LIMIT, MANUAL RE-SET.(1) FIELD PROVIDED WATTS-RADIANT CONTROLLER. ADDITIONAL FEATURES (1) INTERLOCKING FLOW SWITCH, SHIPPED LOOSE PROVIDE THE FOLLOWING INFORMATION THROUGH A MODBUS CONNECTION: TO EXISTING BMS SYSTEM INLET AND OUTLET WATER TEMPERATURE STACK TEMPERATURE STATUS OF SENSORS FAN SPEED SET POINTS BURNER STATUS LOCKOUT CODES ALARM REASONS SYSTEM PUMP STATUS BOILER PUMP STATUS LOW GLYCOL HEAT TRACE STATUS

AutoCAD SHX Text

HOT WATER BOILER

AutoCAD SHX Text

RELIEF VALVE

AutoCAD SHX Text

OUTDOOR SENSOR

AutoCAD SHX Text

SNOW MELT CONTROL PANEL

AutoCAD SHX Text

RELAY

AutoCAD SHX Text

RELAY

AutoCAD SHX Text

MOISTURE SENSOR IN SLAB OF DRIVE

AutoCAD SHX Text

%%UAS-1

AutoCAD SHX Text NOTE: : 1. INITIAL FILL WITH PROPYLENE GLYCOL FOR 40% SOLUTION. INITIAL FILL WITH PROPYLENE GLYCOL FOR 40% SOLUTION. 2. CONTROLS TO BE FIELD INSTALLED BY DIV. 23 CONTRACTOR. CONTROLS TO BE FIELD INSTALLED BY DIV. 23 CONTRACTOR. 3. DIVISION 23, SPEC SECTION 230900, PROVIDER SHALL INCLUDE ALL FIELD DIVISION 23, SPEC SECTION 230900, PROVIDER SHALL INCLUDE ALL FIELD WIRING, ENGINEERING, AND PROGRAMMING FOR FULL INTEGRATION AND CONTROL OF SNOW MELT SYSTEM AT FRONT END BMS (NIAGRA M4) COMPUTER. GRAPHICS TO INCLUDE MAPPING OF HYDRONIC SYSTEM AND BOILER.

AutoCAD SHX Text

%%UGF-1

AutoCAD SHX Text

SNOW MELT SYSTEM LOOPS

AutoCAD SHX Text

34" RELIEF VALVE SET FOR 125 PSI

AutoCAD SHX Text

XFMR

AutoCAD SHX Text

120V POWER BY DIV. 26

AutoCAD SHX Text

MECHANICAL_DETAILS_NEW_WORK

AutoCAD SHX Text

TRC

AutoCAD SHX Text L1

AutoCAD SHX Text

MECH

AutoCAD SHX Text M102

AutoCAD SHX Text

AutoCAD SHX Text BACNET MSTP TO AHU-6LL ALTERON CONTROL. COMMUNICATION WITH EXISTING FRONT END BMS JACE TO BE VIA AHU-6LL CONTROL PANEL.

AutoCAD SHX Text PROVIDE WATTS RADIANT, OR APPROVED EQUAL SNOW MELTING SYSTEM AS INDICATED. TOTAL CIRCUITS OF 6, TOTAL MANIFOLDS OF 1, AND TOTAL SNOW MELT LOAD OF 233,161 BTUH. PROVIDE HARDWIRED, OPENLY PROGRAMMABLE BACNET CONTROLLER FULLY INTEGRATED INTO BUILDINGS BMS. INCLUDED SHALL BE: : - " RADIANT PEX+ COILS 34" RADIANT PEX+ COILS -1 " SS ACCESSORIES KIT W/ 1 " FNPT ISOLATION BALL VALVES, 1 PAIR 12" SS ACCESSORIES KIT W/ 1 " FNPT ISOLATION BALL VALVES, 1 PAIR 12" FNPT ISOLATION BALL VALVES, 1 PAIR -1 " HI-FLOW FLOWMETER MANIFOLD, SS, M-6, 1 PAIR 12" HI-FLOW FLOWMETER MANIFOLD, SS, M-6, 1 PAIR 1 PAIR - " SS-T20F PEX COMPRESSION FITTINGS 34" SS-T20F PEX COMPRESSION FITTINGS -1 " SS MANIFOLD ELBOW 12" SS MANIFOLD ELBOW -1 " SS MANIFOLD PRESSURE TEST KIT 12" SS MANIFOLD PRESSURE TEST KIT -PACK OF CABLE TIES (1000) -PROFESSIONAL TUBING CUTTER -PEX UNWINDER - " PEX TERMINAL BEND SUPPORTS (2 PACK OF 10) 34" PEX TERMINAL BEND SUPPORTS (2 PACK OF 10) -PS HYDRAULIC SEPERATOR 22PGM W/TAILPIECE -1 " FNPT NA TAILPIECE SET (2) 14" FNPT NA TAILPIECE SET (2) -ARMSTRONG PUMPS AS SCHEDULED -ARMSTRONG FF150T 1 " FPTFLEX FLANGE KIT 12" FPTFLEX FLANGE KIT -WATTS AIR SEPARATOR AS SCHEDULED -WATTS EXPANSION TANK AS SCHEDULED -WATTS RBFFRESIDENTIAL BOILER FILL FITTING -WATTS LF009M2-QT RPZBACKFLOW PREVENTOR W/0881380 909-ELC -TEKMAR SNOW MELTING CONTROL, TEKMARNET, ELECTRIC OR HYDRONIC MIXING -(2) TEKMAR RELAY 24V (AC) COIL -TEKMAR 24V(AC) TRANSFORMER, 40 VA W/ MOUNTING BOX -TEKMAR SNOW/ICE SENSOR IN-SLAB W/ WIRE, LENGTH AS REQUIRED -TEKMAR SNOW/ICE SENSOR SOCKET -WESSELS GLYCOL MAKEUP UNIT AS SCHEDULED -(8) NOBLE NOBURST, 40% RTU PREMIXED PROPYLEN GLYCOL ANTI-FREESE, 5 GALLON BUCKETNOBLE NOBURST, 40% RTU PREMIXED PROPYLEN GLYCOL ANTI-FREESE, 5 GALLON BUCKET

AutoCAD SHX Text

SNOW MELT SYSTEM

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

SHT.

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

FLOW - IN DIRECTION

AutoCAD SHX Text

BALL VALVE

AutoCAD SHX Text

RISER DOWN (ELBOW)

AutoCAD SHX Text

RISER UP (ELBOW)

AutoCAD SHX Text

RISE OR DROP

AutoCAD SHX Text

MANUAL AIR VENT

AutoCAD SHX Text

TEST PLUG

AutoCAD SHX Text

PRESSURE & TEMPERATURE

AutoCAD SHX Text

PRESSURE RELIEF VALVE

AutoCAD SHX Text

OF ARROW

AutoCAD SHX Text

PRESS.

AutoCAD SHX Text O.A.

AutoCAD SHX Text

MECH.

AutoCAD SHX Text

GPM

AutoCAD SHX Text

OUTSIDE AIR

AutoCAD SHX Text

PRESSURE

AutoCAD SHX Text

GALLONS PER MINUTE

AutoCAD SHX Text

MECHANICAL

AutoCAD SHX Text

EXH.

AutoCAD SHX Text

EXHAUST

AutoCAD SHX Text

%%UHVAC SYMBOLS AND ABBREVIATIONS LEGEND

AutoCAD SHX Text

CAP.

AutoCAD SHX Text

BTUH

AutoCAD SHX Text

CAPACITY

AutoCAD SHX Text

BTU/HR

AutoCAD SHX Text

NOTE: NOT ALL SYMBOLS MAY BE USED.

AutoCAD SHX Text

HOT WATER SUPPLY PIPING

AutoCAD SHX Text

HOT WATER RETURN PIPING

AutoCAD SHX Text

TEMP & PRESSURE GAUGE

AutoCAD SHX Text T/P

AutoCAD SHX Text

HWR

AutoCAD SHX Text

HWS

AutoCAD SHX Text

BHP

AutoCAD SHX Text

BRAKE HORSEPOWER

AutoCAD SHX Text

MAX.

AutoCAD SHX Text

MAXIMUM

AutoCAD SHX Text

MIN.

AutoCAD SHX Text

MINIMUM

AutoCAD SHX Text

PSI

AutoCAD SHX Text

POUNDS PER SQUARE INCH

AutoCAD SHX Text

%%UGENERAL NOTES:

AutoCAD SHX Text A. THE CONTRACTOR SHALL BE RESPONSIBLE FOR VISITING THE AREA TO BECOME FAMILIAR WITH THE EXISTING THE CONTRACTOR SHALL BE RESPONSIBLE FOR VISITING THE AREA TO BECOME FAMILIAR WITH THE EXISTING CONDITIONS. VERIFY SIZE, LOCATION, AND USAGE OF EXISTING UTILITIES PRIOR TO REMOVAL. FOR FURTHER INFORMATION WITH REGARD TO THE EXTENT OF REMOVALS, SEE THE CONSTRUCTION DRAWINGS AND THE ARCHITECTURAL DRAWINGS WHICH SHOW WORK TO BE PERFORMED. B. IF EQUIPMENT TO REMAIN MUST BE REMOVED DUE TO REMOVAL OR CONSTRUCTION, THE EQUIPMENT SHALL IF EQUIPMENT TO REMAIN MUST BE REMOVED DUE TO REMOVAL OR CONSTRUCTION, THE EQUIPMENT SHALL BE RELOCATED IN A MANNER THAT IS ACCEPTABLE BY THE ARCHITECT/ENGINEER. C. PROPER CONNECTIONS, MATERIALS, AND SIZES OF DUCTWORK SHALL BE MAINTAINED TO ENSURE EQUIPMENT PROPER CONNECTIONS, MATERIALS, AND SIZES OF DUCTWORK SHALL BE MAINTAINED TO ENSURE EQUIPMENT IS MADE FULLY OPERATIONAL. D. FOR ALL RATED WALLS THAT ARE EXTENDED TO STRUCTURE PROVIDE SLEEVES FOR NEW AND EXISTING PIPING FOR ALL RATED WALLS THAT ARE EXTENDED TO STRUCTURE PROVIDE SLEEVES FOR NEW AND EXISTING PIPING AND DUCTWORK PENETRATING WALLS PER SPECS. REFER TO LIFE SAFETY PLANS. E. DRAWING IS DIAGRAMMATIC, PROVIDE ADDITIONAL OFFSETS, TRANSITIONS, ETC. AS REQUIRED TO AVOID DRAWING IS DIAGRAMMATIC, PROVIDE ADDITIONAL OFFSETS, TRANSITIONS, ETC. AS REQUIRED TO AVOID INTERFERENCE'S ENCOUNTERED. RELOCATION OF EXISTING DUCT AND EQUIPMENT HANGERS REQUIRED FOR INSTALLATION WORK SHALL BE CONSIDERED PART OF THIS CONTRACT. F. CONTRACTOR SHALL PROVIDE MANUFACTURER'S RECOMMENDED ACCESS TO ALL EQUIPMENT AND VALVES. CONTRACTOR SHALL PROVIDE MANUFACTURER'S RECOMMENDED ACCESS TO ALL EQUIPMENT AND VALVES. ACCESS SHALL BE REMOVABLE BY CEILING TILES AND CEILING ACCESS PANELS. COORDINATE LOCATION OF MECHANICAL EQUIPMENT WITH OTHER TRADES TO AVOID CONFLICT. G. CEILING CAVITY SPACE IS VERY LIMITED WHERE EQUIPMENT, DUCTWORK AND PIPING IS TO BE INSTALLED. CEILING CAVITY SPACE IS VERY LIMITED WHERE EQUIPMENT, DUCTWORK AND PIPING IS TO BE INSTALLED. COORDINATE ALL SPRINKLER PIPING, ELECTRICAL CONDUIT AND OTHER UTILITIES WHERE REQUIRED FOR NEW INSTALLATION. THE CONTRACTOR SHALL BE RESPONSIBLE TO VISIT EACH AREA OF WORK TO IDENTIFY ANY UTILITIES THAT MUST BE RELOCATED. NOTIFY ENGINEER AND OWNER OF UTILITIES TO BE RELOCATED AND COORDINATE SCHEDULE OF THE ASSOCIATED DOWNTIME WITH THE OWNER. H. CONTRACTOR SHALL PROVIDE FIELD WIRING, ENGINEERING, AND PROGRAMMING FOR FULL INTEGRATION WITH CONTRACTOR SHALL PROVIDE FIELD WIRING, ENGINEERING, AND PROGRAMMING FOR FULL INTEGRATION WITH BUILDING'S BMS (NIAGRA M4). GRAPHICS TO INCLUDE MAPPING OF HYDRONIC SYSTEM AND BOILER. I. CONTRACTOR SHALL SIMULATE TEMPERATURE AND MOISTURE TO PROVE SNOW MELT SYSTEM OPERATION.CONTRACTOR SHALL SIMULATE TEMPERATURE AND MOISTURE TO PROVE SNOW MELT SYSTEM OPERATION.

AutoCAD SHX Text

%%USNOW MELT SEQUENCE OF OPERATION:

IF MOISTURE IS DETECTED WHILE THE OUTDOOR TEMPERATURE IS BETWEEN WARM WEATHER SHUT DOWN AND COLD WEATHER CUT OFF, THE CONTROL SHALL ENTER THE "MELTING" STATE. IN THIS STATE THE CONTROL SHALL DETERMINE A SLAB TARGET TEMPERATURE, BASED ON THE MELTING SETPOINT AND THE CURRENT OUTDOOR TEMPERATURE, AND REGULATE THE HEAT SOURCE TO MAINTAIN THIS TARGET. IT SHALL REMAIN IN THIS STATE UNTIL MOISTURE IS NO LONGER DETECTED AND ANY ADDITIONAL MELT TIME (AS PROGRAMMED) HAS EXPIRED. DURING OPERATION, SHOULD THE OUTDOOR TEMPERATURE DROP BELOW THE COLD WEATHER CUT OFF SETPOINT, THE CONTROL SHALL SHUT DOWN THE HEATING SYSTEM TO CONSERVE ENERGY; THE CONTROLS SHALL ENTER A 'MELT PENDING' STATE AND WILL RESUME MELTING WHEN THE OUTDOOR TEMPERATURE RISES ABOVE THE COLD WEATHER CUT OFF SET POINT. IF AN IDLE SETPOINT HAS BEEN CONFIGURED, THE CONTROL SHALL MAINTAIN THE DESIRED SLAB TEMPERATURE WHILE THE OUTDOOR TEMPERATURE IS BETWEEN WARM WEATHER SHUT DOWN AND COLD WEATHER CUT OFF. WARM WEATHER SHUT DOWN SETPOINT: THE CONTROL SHALL INCORPORATE AN ADJUSTABLE WARM WEATHER SHUT DOWN SETPOINT. WHEN THE OUTDOOR TEMPERATURE RISES ABOVE THE WWSD, THE CONTROL WILL DEACTIVATE THE SNOW MELTING SYSTEM, THEREBY CONSERVING ENERGY. COLD WEATHER CUT OFF SETPOINT: THE CONTROL SHALL INCORPORATE AN ADJUSTABLE COLD WEATHER CUT OFF SETPOINT. WHEN THE OUTDOOR TEMPERATURE FALLS BELOW THIS SETTING, THE CONTROL WILL DEACTIVATE THE SYSTEM, THEREBY CONSERVING ENERGY. IF A MELT IS IN PROGRESS WHEN THE TEMPERATURE FALLS BELOW THIS SETPOINT, THE CONTROL SHALL ENTER A PENDING STATE UNTIL THE OUTDOOR TEMPERATURE RISES ABOVE THE COLD WEATHER CUT OFF. THE CONTROL WILL RESUME MELTING UNTIL MOISTURE IS NO LONGER DETECTED. MELTING SETPOINT: THE CONTROL SHALL INCORPORATE AN ADJUSTABLE MELTING SETPOINT. THE CONTROL WILL MAINTAIN THE SLAB SURFACE AT THE MELTING SETPOINT BY ACCOUNTING FOR OUTDOOR TEMPERATURE WHILE THE CONTROL IS IN THE MELT STATE. IDLING SETPOINT: THE CONTROL SHALL INCORPORATE AN ADJUSTABLE IDLE SETPOINT. THE CONTROL WILL MAINTAIN THE SLAB SURFACE AT THE IDLE SETPOINT IF ONE IS CONFIGURED; OTHERWISE, THE IDLE FEATURE SHALL BE OFF. STORM SETPOINT: THE CONTROL SHALL INCORPORATE AN ADJUSTABLE STORM SETPOINT. WHEN A STORM IS EXPECTED, THE CONTROL MAY ENTER THE TEMPORARY IDLE, OR STORM, STATE. THE CONTROL WILL MAINTAIN THE SLAB SURFACE AT THE STORM SETPOINT FOR A TIME FRAME UP TO 24:00 HOURS. THE STORM OPERATION CAN ONLY BE ACTIVATED BY A USER SWITCH OR GATEWAY. SLAB OUTDOOR RESET: THE CONTROL SHALL MAINTAIN A SETPOINT SLAB SURFACE TEMPERATURE BY ADJUSTING TARGET WATER TEMPERATURES IN PROPORTION TO THE CURRENT OUTDOOR TEMPERATURE. EFFICIENCY IS MAXIMIZED BY ACCOUNTING FOR CHANGES IN HEAT LOSS THAT RESULT WITH CHANGES IN OUTDOOR TEMPERATURE. SLAB PROTECTION: THE CONTROL SHALL PROVIDE OPTIONAL SLAB PROTECTION. ONCE ENABLED, SLAB PROTECTION SHALL LIMIT THE TEMPERATURE OF THE SUPPLY WATER TO HELP PROTECT THE SLAB AGAINST THERMAL STRESSES. EXERCISING: THE CONTROL SHALL BE ABLE TO OPERATE THE PUMPS EVERY THREE DAYS TO PREVENT PUMP SEIZURE. MEMORY: THE CONTROL SHALL STORE ALL CONFIGURATION AND SETTINGS IN NON-VOLATILE MEMORY. IN CASE OF POWER FAILURE THE CONTROL SHOULD BE ABLE TO RETRIEVE ALL OF ITS LATEST SETTINGS. DISPLAY: THE CONTROL SHALL HAVE A TOUCHSCREEN DISPLAY TO CLEARLY DISPLAY THE CURRENT SYSTEM OPERATION WITH AN ILLUMINATED STATUS MESSAGE.

SNOW MELT POWER PLAN - NEW WORK

L1 ELEC

EP104

GREAT LAKES REGION 5

PROPERTY OF THE

UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

SHEET OF

DISCIPLINE

DRAWING NO.

DRAWN BY

DATE

PCN NO.

GSA PM

PROJ. DESC.

BLDG NO.

CITY/ST./ZIP

STREET

BLDG NAME

MARK

FLOOR NO.

DATEDESCRIPTION

REVISION

TITLE

GENERAL SERVICES ADMINISTRATION

SHEET DESIGNATOR

SHEET SIZE

SUB A/E

PRIME A/E

CONS. CONTR.

A/E CON. NO.

C O N T R A C T O R S

CONSTR. CON.

A/E TASK NO.

CONS. WORK

CONTRACTOR INFO

MELVIN-PRICE FEDERAL BUILDING

BRETT ETLING

905 North Capital Avenue, Suite 100 Indianapolis, IN 46204 www.guidondesign.com

IL0301ES

750 EAST MISSOURI AVE.

EAST SAINT LOUIS

GSA SECURITY UPGRADE

02-27-2019

30x42

IL 62201

GS-05-P-17-SC-D-0001

47PF-0018F-0230

GUIDON BCCLT JV LLC

RIL11680

TAT E OF I L L I N

O I S

A E

S E EAOS

EISTEE

OFESSIONAL

ENINEE

AutoCAD SHX Text

EXISTING CONDUITS FOR

AutoCAD SHX Text

GUARD SHACK POWER

AutoCAD SHX Text

AND COMMUNICATIONS

AutoCAD SHX Text

EXIST. OVERHEAD DOOR CONTROLLER

AutoCAD SHX Text

EXIST SECURITY GATE BACK-UP POWER INVERTER

AutoCAD SHX Text X

AutoCAD SHX Text EXIST. PANEL RBL-1Bb

AutoCAD SHX Text

SNOW MELT CONTROL PANEL, 120V,1

AutoCAD SHX Text

GF-1 120V,1

AutoCAD SHX Text P-1 370W, 120V,1

AutoCAD SHX Text P-2 370W, 120V,1

AutoCAD SHX Text RBL-1Bb-16, NOTE 2

AutoCAD SHX Text RBL-1Bb-18, NOTE 2

AutoCAD SHX Text B-1, 2A,120V,1

AutoCAD SHX Text S

AutoCAD SHX Text

NOTE 1

AutoCAD SHX Text J

AutoCAD SHX Text

NOTE 3

AutoCAD SHX Text

SCALE: 1/4" = 1'-0"

AutoCAD SHX Text

%%UELECTRICAL POWER PLAN

AutoCAD SHX Text A. THE CONTRACTOR SHALL BE RESPONSIBLE FOR VISITING THE BUILDING AND SITE THE CONTRACTOR SHALL BE RESPONSIBLE FOR VISITING THE BUILDING AND SITE TO BECOME FAMILIAR WITH THE EXISTING CONDITIONS, VERIFY SIZE, LOCATION, AND USAGE OF UTILITIES AND EQUIPMENT PRIOR TO CONSTRUCTION. B. ALL EQUIPMENT REMOVED FOR RELOCATION SHALL BE REMOVED IN SUCH A ALL EQUIPMENT REMOVED FOR RELOCATION SHALL BE REMOVED IN SUCH A MANNER THAT REUSE IS POSSIBLE. C. PATCH ALL OPENINGS IN WALLS, FLOORS, AND CEILINGS WHERE REMOVAL OF PATCH ALL OPENINGS IN WALLS, FLOORS, AND CEILINGS WHERE REMOVAL OF EQUIPMENT OR DEVICES CREATES SUCH OPENINGS. PATCH OPENINGS TO MATCH EXISTING. D. IF PORTIONS OF CIRCUITS SERVING EQUIPMENT TO REMAIN MUST BE RELOCATED IF PORTIONS OF CIRCUITS SERVING EQUIPMENT TO REMAIN MUST BE RELOCATED OR REMOVED DUE TO INTERFERENCE WITH NEW EQUIPMENT INSTALLATION, THE CIRCUITS SHALL BE MODIFIED IN SUCH A MANNER WHICH WILL ENSURE THE PROPER OPERATION OF THE EQUIPMENT AFTER CONSTRUCTION IS COMPLETE, USE THE SAME TYPE OF CONDUCTOR AND SAME CONDUIT SIZE AS EXISTING TO MAKE ALL REQUIRED MODIFICATIONS. E. CONTRACTOR SHALL BE RESPONSIBLE FOR ALL REMOVALS REQUIRED FOR THE CONTRACTOR SHALL BE RESPONSIBLE FOR ALL REMOVALS REQUIRED FOR THE INSTALLATION OF NEW WORK, WHETHER OR NOT IT IS SPECIFICALLY INDICATED OR NOTED IN THESE DOCUMENTS. F. ALL CONDUIT RUNS TO REMOVED EQUIPMENT OR DEVICES SHALL BE COMPLETELY ALL CONDUIT RUNS TO REMOVED EQUIPMENT OR DEVICES SHALL BE COMPLETELY REMOVED BACK TO SOURCE, INCLUDING ALL HANGERS, BEAM CLAMPS, MISCELLANEOUS SUPPORTS, AND WIRING. G. COORDINATE CONDUIT ROUTING WITH EXISTING EQUIPMENT TO AVOID CONFLICTS COORDINATE CONDUIT ROUTING WITH EXISTING EQUIPMENT TO AVOID CONFLICTS WITH EQUIPMENT AND EQUIPMENT CLEARANCE. H. SEAL AROUND ALL WALL PENETRATIONS WITH FIRE STOPPING. SEAL AROUND ALL WALL PENETRATIONS WITH FIRE STOPPING. I. BRANCH CIRCUIT NEUTRAL CONDUCTORS SHALL NOT BE SHARED WITH ANOTHER BRANCH CIRCUIT NEUTRAL CONDUCTORS SHALL NOT BE SHARED WITH ANOTHER CIRCUIT. J. EACH BRANCH CIRCUIT SHALL BE EQUIPPED WITH A GREEN EQUIPMENT EACH BRANCH CIRCUIT SHALL BE EQUIPPED WITH A GREEN EQUIPMENT GROUNDING CONDUCTOR.

AutoCAD SHX Text

%%UGENERAL ELECTRICAL NOTES:

AutoCAD SHX Text

ELECTRICAL LEGEND

AutoCAD SHX Text

WORKING CLEARANCE

AutoCAD SHX Text

NP-1,3,5

AutoCAD SHX Text

PHASE

AutoCAD SHX Text

NEUTRAL

AutoCAD SHX Text

CONDUCTORS

AutoCAD SHX Text

GROUND

AutoCAD SHX Text

INDICATE NUMBER OF CONDUCTORS REQUIRED. CONDUIT

AutoCAD SHX Text

CIRCUIT CONCEALED IN CEILING OR WALL. CROSSBARS

AutoCAD SHX Text

HOMERUN TO PANELBOARD INDICATED. NUMBER OF

AutoCAD SHX Text

ARROWHEADS INDICATES NUMBER OF CIRCUITS. NUMBER

AutoCAD SHX Text

NOT SIZED IS Ô", CONDUCTORS NOT SIZED ARE #12 AWG.

AutoCAD SHX Text

INDICATES CIRCUIT NUMBERS. PREFIX INDICATES PANEL

AutoCAD SHX Text

SURFACE MOUNTED PANELBOARD.

AutoCAD SHX Text

CIRCUIT BREAKER.

AutoCAD SHX Text

NUMBER.

AutoCAD SHX Text

CONDUIT EXPOSED.

AutoCAD SHX Text

CONDUIT CONCEALED BENEATH GROUND.

AutoCAD SHX Text

%%USYMBOL

AutoCAD SHX Text

%%UDESCRIPTION

AutoCAD SHX Text 120V

AutoCAD SHX Text

%%UPUMPS P-1 & P-2

AutoCAD SHX Text

SCALE: NONE

AutoCAD SHX Text

INTERLOCK

AutoCAD SHX Text

CONTROL

AutoCAD SHX Text

OFF

AutoCAD SHX Text

HAND

AutoCAD SHX Text

AUTO

AutoCAD SHX Text R

AutoCAD SHX Text M

AutoCAD SHX Text

MOTOR RUN

AutoCAD SHX Text

PILOT LIGHT

AutoCAD SHX Text

STARTER

AutoCAD SHX Text %%C

AutoCAD SHX Text N

AutoCAD SHX Text

AUX. STARTER

AutoCAD SHX Text

CONTACT

AutoCAD SHX Text M

AutoCAD SHX Text

MAIN BREAKER

AutoCAD SHX Text

AutoCAD SHX Text %%UEXIST. PANEL RBL-1Bb

AutoCAD SHX Text

%%UBUSSING DIAGRAM

AutoCAD SHX Text 20A/2

AutoCAD SHX Text 30A/3

AutoCAD SHX Text 20A/1

AutoCAD SHX Text 20A/3

AutoCAD SHX Text 20A/1

AutoCAD SHX Text 20A/3

AutoCAD SHX Text

GARAGE DOOR

AutoCAD SHX Text

HVAC TRANS.

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

SPACE

AutoCAD SHX Text

NORTH SECURITY GATE

AutoCAD SHX Text

SNOW MELT PUMPS, P-1 & P-2

AutoCAD SHX Text

SNOW MELT C. PNL., BOILER, GF-1, HEAT TRACE

AutoCAD SHX Text

PARKING LOT VEHICLE GATE

AutoCAD SHX Text

EXISTING LOAD

AutoCAD SHX Text

SOUTH SECURITY GATE

AutoCAD SHX Text

ACCESS CONTROL PEDESTAL

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

RECEPT. - GARAGE, SEC. MONITOR

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

SPARE

AutoCAD SHX Text

100A, MAIN BREAKER 208Y/120V 3 , 4W, 30 CKT.GENERAL ELECTRIC A SERIES, II PANEL

AutoCAD SHX Text

1. PROVIDE NEMA SIZE 0 FULL VOLTAGE NON-REVERSING STARTER FOR PUMPS PROVIDE NEMA SIZE 0 FULL VOLTAGE NON-REVERSING STARTER FOR PUMPS `P-1' & `P-2'. PROVIDE WITH HAND-OFF-AUTO SELECTOR SWITCH AND PILOT LIGHT IN STARTER COVER. REFER TO P-1 AND P-2 CONTROL WIRING DIAGRAM. 2. PROVIDE CIRCUIT TO PANEL. UTILIZE SPARE 20A/1 CIRCUIT BREAKER IN PANEL. PROVIDE CIRCUIT TO PANEL. UTILIZE SPARE 20A/1 CIRCUIT BREAKER IN PANEL. 3. PROVIDE POWER TO WATER LINE FREEZE PROTECTION HEATING PROVIDE POWER TO WATER LINE FREEZE PROTECTION HEATING CABLE SYSTEM. SEE MECHANICAL DRAWINGS.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text 100A/3

AutoCAD SHX Text S

AutoCAD SHX Text

MOTOR.

AutoCAD SHX Text COMBINATION MAGNETIC MOTOR CONTROLLER TO SUIT MOTOR. MOUNT 4'-6" A.F.F. TO CENTER, UNLESS NOTED OTHERWISE.

AutoCAD SHX Text

NOTE 2

AutoCAD SHX Text

%%UCONTROL WIRING DIAGRAM

AutoCAD SHX Text 20A, 125V DUPLEX RECEPTACLE. MOUNT 18 INCHES ABOVE FINISHED FLOOR TO BOTTOM, UNLESS NOTED OTHERWISE.

AutoCAD SHX Text SINGLE POLE 20A SPECIFICATION GRADE TOGGLE SWITCH. MOUNT 44" A.F.F. TO BOTTOM, NOTED OTHERWISE.

2-27-2019

EP104

Sheets and Views

EP104

M101

Sheets and Views

M101

M102

Sheets and Views

M102

P101

Sheets and Views

P101

File details come from the government source that posted it.