Exhibit_F_-_pivCLASS_Reader_PIS.pdf

hidglobal.com

PHYSICAL ACCESS SOLUTIONS

pivCLASS® R10, R15, R40 Readers pivCLASS® READERS FOR "CONTROLLED" AREAS ENABLE

HIGH SECURITY, INTEROPERABILITY AND COMPLIANCE

� Part of an integrated solution from a single, trusted provider – Enables FIPS 201 compliance per NIST SP 800-116 guidelines and the TWIC Reader Specification.

� Contactless reader solution for "Controlled" security areas – Meets NIST's "Controlled" security area assurance level requirements with a single-factor authentication mode: CHUID + VIS or CAK.

� Supports multiple card types – PIV, PIV-I, CAC, CIV (a.k.a., PIV-C), TWIC and FRAC, as well as iCLASS® and HID Prox® cards for easy, phased transitions from legacy technology to new PKI-enabled smart cards.

HID Global pivCLASS® Government Solutions enable facilities to upgrade their existing physical access control system (PACS) to FIPS

201 compliance.

The pivCLASS R10, R15, R40 readers and their prox enabled versions deliver the "Controlled" assurance level (as defined in NIST SP 800-116) when used with the pivCLASS Authentication

Module (PAM) to perform the following single-factor authentication modes:

CHUID + VIS Authentication – The pivCLASS system tests the signature on the PIV Card

Holder Unique IDentifier (CHUID) data object.

The CHUID signature check ensures the card is authentic (it came from a valid issuer) and has integrity (it has not been altered).

Because the CHUID is a “free read” and will be transmitted unencrypted to any reader, it could be possible for perpetrators to capture a PIV card's CHUID and create a counterfeit card. However, the pivCLASS signature check secures against this threat and identifies cards that have been counterfeited or altered.*

CAK Authentication – pivCLASS readers work with the pivCLASS Authentication Module to perform a PKI challenge-response in addition to a signature check to validate the card authentication key (CAK). The challenge-response test ensures the public key in the card authentication certificate is bound to the private key on the card. pivCLASS CAK authentication secures against cards that have been counterfeited, altered, copied or cloned.

pivCLASS readers are guaranteed to meet stringent specifications for operation, reliability and interoperability with other Genuine HID™ products.

ADDITIONAL PRODUCT FEATURES:

� Architected for maximum security and affordability. pivCLASS utilizes the pivCLASS® Authentication Module to perform the cryptographic functionality and to pass Wiegand-formatted data to the PACS controller. Locating the critical security operations within the secure perimeter, rather than on the attack side of the door, increases security and reader affordability.

� Up to two pivCLASS readers can connect to a pivCLASS Authentication Module via four-wire RS-485 communication to the reader, typically enabling facilities to re-use much of their existing wiring.

� Available in mullion, mini-mullion and wall switch form factors designed to mount and cover single-gang switch boxes.

� Available with either a pigtail or terminal strip wiring termination.

� Each of these readers can also be ordered with Prox support.

For the following security areas per NIST SP 800-116:

“Controlled” Areas “Exclusion” Areas“Limited” Areas

* Per SP 800-116, to achieve "Controlled" assurance, the CHUID read must be combined with a visual check (VIS) of the identification card.

http://www.hidglobal.com

PHYSICAL ACCESS SOLUTIONS

pivCLASS® Contactless Readers

CONTACTLESS READERS FOR "CONTROLLED" AREAS ENABLE

HIGH SECURITY, INTEROPERABILITY AND COMPLIANCE

� Part of an integrated solution from a single, trusted provider – Enable FIPS 201 compliance per NIST SP 800-116 guidelines and the TWIC Reader Specification.

� Contactless reader solutions for "Controlled" security areas – Meet NIST's

"Controlled" security area assurance-level requirements with a single-factor authentication.

� Support multiple card types – Work with PIV, PIV-I, CAC, CIV (a.k.a., PIV-C), TWIC, FRAC, iCLASS® and HID Prox® cards for easy, phased transitions from legacy technology to new PKI-enabled smart cards.

HID Global's pivCLASS Government Solutions portfolio enables facilities to upgrade their existing physical access control system (PACS) to achieve FIPS 201 compliance.

The pivCLASS contactless readers (R10, R15 and

R40) and their proximity-enabled versions deliver the "Controlled" assurance level defined in the

National Institute of Standards and Technology

(NIST) SP 800-116 guidelines when used with the pivCLASS Authentication Module (PAM) to perform a single-factor authentication check:

CHUID + VIS Authentication – The pivCLASS system tests the signature on the PIV Card

Holder Unique IDentifier (CHUID) data object.

The CHUID signature check ensures the card is authentic (came from a valid issuer) and has integrity (has not been altered).

Because the CHUID is a “free read” and will be transmitted unencrypted to any reader, it could be possible for perpetrators to capture a PIV card's CHUID and create a counterfeit card.

However, the required visual check (VIS) of the card secures against this threat by making it possible to identify cards that have been counterfeited or altered.*

CAK Authentication – These pivCLASS readers work with the PAM to perform a PKI challenge-response test in addition to a signature check to validate the card authentication key (CAK).

The challenge-response test ensures the public key in the card authentication certificate is bound to the private key on the card. This CAK authentication secures against cards that have been counterfeited, altered, copied or cloned.

These pivCLASS readers are guaranteed to meet the stringent specifications for operation, reliability and interoperability with other

Genuine HID™ products.

ADDITIONAL PRODUCT FEATURES:

� Architected for maximum security and affordability, these readers utilize the pivCLASS Authentication Module to provide cryptographic functionality and to pass Wiegand-formatted data to the

PACS controller. Locating the critical security operations within the secure perimeter, rather than on the attack side of the door, increases security and reader affordability.

� Up to two pivCLASS readers can connect to a pivCLASS Authentication

Module via four-wire RS-485 communication to the reader, typically enabling facilities to reuse much of their existing wiring.

� Available in mullion, mini-mullion and wall switch form factors to mount and cover single-gang switch boxes.

� Available with either a pigtail or terminal strip wiring termination.

� Each of these readers can also be ordered with 125 kHz proximity support.

Meet NIST assurance-level requirements for these areas:

* Per SP 800-116, to achieve "Controlled" assurance, the CHUID read must be combined with a visual check (VIS) of the identification card.

“Controlled” Areas “Exclusion” Areas “Limited” Areas “Unrestricted” Areas

Homeland Security Presidential Directive 12 (HSPD-12) Standard For PIV Class Readers Are Defined In National Institute of Standards and Technology (NIST), Federal Information Processing Standards (FIPS), Special Publication (SP), 800-116 Titled "A Recommendation for the Use of PIV Credentials in Physical Access Control Systems (PACS)".

© 2015 HID Global Corporation. All rights reserved. HID, the HID logo, pivCLASS, Genuine HID, and iCLASS are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.

2015-02-27-pivclass-fips-controlled-readers-ds-en PLT-00413

North America: +1 512 776 9000

Toll Free: 1 800 237 7769

Europe, Middle East, Africa: +44 1440 714 850

Asia Pacific: +852 3160 9800

Latin America: +52 55 5081 1650

SPECIFICATIONS

Model Name R10-H R15-H R40-H RP10-H RP15-H RP40-H

Base Part Number 900NHR 910NHR 920NHR 900PHR 910PHR 920PHR

13.56 MHz Card Compatibility PKI-Based FIPS-201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAC

Secure Identity Object (SIO) on iCLASS SE, SE for MIFARE DESFire EV1 and SE for MIFARE Classic standard iCLASS Access Control Application

ISO14443A (MIFARE) CSN

125 kHz Card Compatibility N/A HID, AWID, EM4102

System Requirements These readers require HID pivCLASS Authentication Module (M2000) to support FICAM compliance

Typical Contactless Read Range1 FIPS 201 type cards can be read using either the contact or contactless card interface

FIPS-201 Type Cards, Contactless Interface2

PIV, PIV-I, CIV, CAC, TWIC and FRAC

1" (2.5 cm) 1" (2.5 cm) 1.5" (3.8 cm) 1" (2.5 cm) 1" (2.5 cm) 1.5" (3.8 cm)

13.56 MHz iCLASS, DESFire and MIFARE Cards

iCLASS SE® 2.5" (6.4 cm) 2.5" (6.4 cm) 4.5" (11 cm) 2.5" (6.4 cm) 2.5" (6.4 cm) 4.5" (11 cm)

DESFire® EV1 and HID SE™ 1" (2.5 cm) 1" (2.5 cm) 2" (5.1 cm) 1" (2.5 cm) 1" (2.5 cm) 2" (5.1 cm)

MIFARE® Classic and HID SE® 2.3" (4.0 cm) 2.3" (4.0 cm) 4.5" (11 cm) 2.3" (4.0 cm) 2.3" (4.0 cm) 4.5" (11 cm)

125 kHz Promimity Cards

HID Prox / AWID N/A N/A 2" (5.1 cm) 2" (5.1 cm) 2.5" (6.4 cm)

EM4102 N/A N/A 3.5" (8.9 cm) 3.5" (8.9 cm) 4.0" (10 cm)

Mounting Mini-mullion size;

physically HID

Global's smallest pivCLASS readers;

ideally suited for mullion-mounted door installations, U.S. single-gang J-box (with mud ring) or any flat surface

Mullion size;

physically HID

Global's second smallest pivCLASS readers; ideally suited for mullion-mounted door installations, U.S.

single-gang J-box (with mud ring) or any flat surface

Wall switch size;

designed to mount and cover single-gang switch boxes primarily used in the Americas;

includes a slotted mounting plate for European and Asian back box spacing

Mini-mullion size;

physically HID

Global's smallest pivCLASS readers and are ideally suited for mullion-mounted door installations, U.S.

single-gang J-box (with mud ring) or any flat surface

Mullion size;

physically HID

Global's second smallest pivCLASS readers; ideally suited for mullion-mounted door installations, U.S.

single-gang J-box (with mud ring) or any flat surface

Wall switch size with keypad (illuminated, 4 x 3); designed to mount and cover single-gang switch boxes;

primarily used in the

Americas; includes a slotted mounting plate for European and Asian back box spacing

Color Black or Gray

Dimensions 1.9" x 4.1" x 0.9" (4.8 x 10.3 x 2.3cm)

1.9" x 6.0" x 0.9" (4.8 x 15.3 x 2.3 cm)

3.3" x 4.8" x 1.0" (8.4 x 12.2 x 2.4 cm)

1.9" x 4.1" x 0.9" (4.8 x 10.3 x 2.3cm)

1.9" x 6.0" x 0.9" (4.8 x 15.3 x 2.3 cm)

3.3" x 4.8" x 1.0"

(8.4 x 12.2 x 2.4 cm)

Product Weight (Pigtail) 3.9 oz. (113 g) 5.3 oz. (151 g) 7.7 oz. (220 g) 4.0 oz. (114 g) 5.2 oz. (149 g) 7.8 oz. (222 g)

Product Weight (Terminal Strip) 2.9 oz. (84 g) 4.2 oz. (120 g) 7.5 oz. (215 g) 3.0 oz. (85 g) 4.3 oz. (124 g) 7.6 oz. (216 g)

Operating Voltage Range +12VDC

Current Draw - Normal Standby Current3 60 mA 60 mA 65 mA 75 mA 75 mA 85 mA

Current Draw - Maximum Average4 100 mA 100 mA 110 mA 100 mA 100 mA 110 mA

Current Draw - Peak5 200 mA 200 mA

Operating Temperature -30̊ to 150̊ F (-35̊ to 65̊ C)

Operating Humidity 5% to 95% relative humidity non-condensing

Storage Temperature -67̊ to 185̊ F (-55̊ to 85̊ C)

Environmental Indoor / Outdoor; IP55, IP65 if installed with optional gasket (IP65GSKT)

Transmit Frequency 13.56 MHz 13.56 MHz & 125 kHz

Protocol HID pivCLASS Protocol, CoreStreet Reader Protocol

Cable Distance6 Six conductor connections per reader: full duplex four-wire RS485 for communication (500 ft [152m], 22AWG), (300 ft [91m], 24AWG); two wires for power (500 ft [152m], 22AWG)

Wiring Connection Pigtail or Terminal Strip

Certifications FICAM tested7, UL294 (U.S. & Canada), FCC Certification (U.S.), RoHS2

Housing Material UL94 Polycarbonate

% of recycled content (Pigtail) 10.5% 11.0% 10.5% 10.5% 11.0% 10.5%

% of recycled content (Terminal Strip) 11.0% 11.5% 11.0% 10.5% 11.0% 11.0%

UL Ref Number R10E R15E R40E RP10E RP15E RP40E

Warranty Limited Lifetime

1 Typical read range in air. Different types of met al will cause some degradation (typically up to 20%). Use spacers to space product off metal and improve read range if required. Read ranges for FIPS 201 type cards will vary depending on the card manufacturer.

2 Measured using the SIO Data Model.

3 Standby Average - RMS current draw without a card in the RF field.

4 Maximum Average - RMS current draw during continuous PIV card reads.

5 Peak - highest instantaneous current draw during RF communication.

6 For cable lengths when used in Wiegand mode see "pivCLASS Reader Installation Guide" PLT-01134.

7 FICAM tested as part of complete physical access control systems.

An ASSA ABLOY Group brand

© 2014 HID Global Corporation. All rights reserved. HID, the HID logo, pivCLASS, Genuine HID, and iCLASS are trademarks or registered trademarks of HID Global in the U.S. and/or other countries. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.

2014-02-14-pivclass-fips-controlled-readers-ds-en PLT-00413 hidglobal.com

North America: +1 949 732 2000 Toll Free: 1 800 237 7769 Europe, Middle East, Africa: +49 6123 791 0 Asia Pacific: +852 3160 9800 Latin America: +52 55 5081 1650

SPECIFICATIONS

Model Name R10-H R15-H R40-H RP10-H RP15-H RP40-H

Base Part Number 900NHR 910NHR 920NHR 900PHR 910PHR 920PHR

13.56 MHz Card Compatibility PKI-Based FIPS-201 Credentials including PIV, PIV-I, CIV, CAC, TWIC and FRAQ Secure Identity Object (SIO) on iCLASS SE, SE for MIFARE DESFire EV1 and SE for MIFARE Classic standard iCLASS Access Control Application

ISO14443A (MIFARE) CSN

125 kHz Card Compatibility N/A HID, AWID, EM4102

System Requirements These readers require HID pivCLASS Authentication Module (M2000) to support FICAM compliance

Typical Contactless Read Range1 FIPS 201 type cards can be read using either the contact or contactless card interface

FIPS-201 Type Cards, Contactless Interface1

PIV, PIV-I, CIV, CAC, TWIC and FRAQ

1" (2.5 cm) 1" (2.5 cm) 1.5" (3.8 cm) 1" (2.5 cm) 1" (2.5 cm) 1.5" (3.8 cm)

13.56 MHz iCLASS, DesFIRE and MiFARE Cards2

iCLASS SE 2.5" (6.4 cm) 2.5" (6.4 cm) 4.5" (11 cm) 2.5" (6.4 cm) 2.5" (6.4 cm) 4.5" (11 cm)

DESFire EV1 SE 1" (2.5 cm) 1" (2.5 cm) 2" (5.1 cm) 1" (2.5 cm) 1" (2.5 cm) 2" (5.1 cm)

MIFARE Classic SE 2.3" (4.0 cm) 2.3" (4.0 cm) 4.5" (11 cm) 2.3" (4.0 cm) 2.3" (4.0 cm) 4.5" (11 cm)

125 kHz Promimity Cards

HID Prox / AWID N/A N/A 2" (5.1 cm) 2" (5.1 cm) 2.5" (6.4 cm)

EM4102 N/A N/A 3.5" (8.9 cm) 3.5" (8.9 cm) 4.0" (10 cm)

Mounting Mini-Mullion Size;

physically HID's smallest iCLASS readers and are ideally suited for mullion-mounted door installations, U.S. single-gang J-box (with mud ring) or any flat surface

Mullion Size;

physically HID's second smallest iCLASS readers and are ideally suited for mullion-mounted door installations, U.S.

single-gang J-box (with mud ring) or any flat surface

Wall Switch Size;

designed to mount and cover single gang switch boxes primarily used in the Americas and includes a slotted mounting plate for European and Asian back box spacing

Mini-Mullion Size;

physically HID's smallest iCLASS readers and are ideally suited for mullion-mounted door installations, U.S. single-gang J-box (with mud ring) or any flat surface

Mullion Size;

physically HID's second smallest iCLASS readers and are ideally suited for mullion-mounted door installations, U.S.

single-gang J-box (with mud ring) or any flat surface

Wall Switch Size;

designed to mount and cover single gang switch boxes primarily used in the Americas and includes a slotted mounting plate for European and Asian back box spacing

Color Black or Gray

Dimensions 1.9" x 4.1" x 0.9" (4.8 x 10.3 x 2.3 cm)

1.9" x 6.0" x 0.9" (4.8 x 15.3 x 2.3 cm)

3.3" x 4.8" x 1.0" (8.4 x 12.2 x 2.4 cm)

1.9" x 4.1" x 0.9" (4.8 x 10.3 x 2.3 cm)

1.9" x 6.0" x 0.9" (4.8 x 15.3 x 2.3 cm)

3.3" x 4.8" x 1.0" (8.4 x 12.2 x 2.4 cm)

Product Weight (Pigtail) 3.9 oz. (113 g) 5.3 oz. (151 g) 7.7 oz. (220 g) 4.0 oz. (114 g) 5.2 oz. (149 g) 7.8 oz. (222 g)

Product Weight (Terminal Strip) 2.9 oz. (84 g) 4.2 oz. (120 g) 7.5 oz. (215 g) 3.0 oz. (85 g) 4.3 oz. (124 g) 7.6 oz. (216 g)

Operating Voltage Range +12VDC

Current Draw - Normal Standby Current3 60 mA 60 mA 65 mA 75 mA 75 mA 85 mA

Current Draw - Maximum Average4 100 mA 100 mA 110 mA 100 mA 100 mA 110 mA

Current Draw - Peak5 200 mA 200 mA

Operating Temperature -30º to 150º F (-35º to 65º C)

Operating Humidity 5% to 95% relative humidity non-condensing

Storage Temperature -67º to 185º F (-55º to 85º C)

Environmental Indoor / Outdoor; IP55, IP65 if installed with optional gasket (IP65GSKT)

Transmit Frequency 13.56 MHz 13.56 MHz & 125 kHz

Protocol HID pivCLASS Protocol, CoreStreet Reader Protocol

Cable Distance6 Six conductor connection per reader:

full duplex four-wire RS485 for communication (500ft (152m), 22AWG), (300ft (91m), 24AWG); two wires for power (500ft (152m), 22AWG)

Wiring Connection Pigtail or Terminal Strip

Certifications FICAM tested7, UL294 (US & Canada), FCC Certification, RoHS2

Housing Material UL94 Polycarbonate

% of recycled content (Pigtail) 10.5% 11.0% 10.5% 10.5% 11.0% 10.5%

% of recycled content (Terminal Strip) 11.0% 11.5% 11.0% 10.5% 11.0% 11.0%

UL Ref Number R10E R15E R40E RP10E RP15E RP40E

Warranty Limited Lifetime 1 Typical read range in air. Different types of metal will cause some degradation (typically up to 20%). Use spacers to space product off metal and improve read range if required. Read ranges for FIPS 201 type cards will vary depending upon the card manufacturer.

2 Measured using the SIO Data Model 3 Standby Average - RMS current draw without a card in the RF field 4 Maximum Average - RMS current draw during continuous PIV card reads 5 Peak - highest instantaneous current draw during RF communication 6 For cable lengths when used in Wiegand mode see "pivCLASS Reader Installation Guide" PLT-01134 7 FICAM tested as part of complete physical access control systems

An ASSA ABLOY Group brand http://www.hidglobal.com http://www.hidglobal.com richard.swagerty.ctr Highlight richard.swagerty.ctr Highlight