4052323170Pricing.xlsx
XLSX spreadsheet 154 KB Posted
- Attached to
- Buses, Transit (Adult Passenger) (Statewide)
- Contract number
- 23170
- Issued by
- New York
About this file
This document is a Contract Pricelist for Transit Buses, specifically identified as Government File ID fa75c4b0af8b0ab867897e24d58bde16, dated November 15, 2024 (corrected November 25, 2024). The document appears to be an attachment to a state and local government contract vehicle for purchasing transit buses, organized into multiple lots labeled A through E.
The contract covers Transit Buses (Adult Passenger) and provides a comprehensive pricing structure for low-floor vehicles across different lots. The pricing list includes base item unit prices and optional equipment unit prices, with each lot representing a specific category or type of transit bus. The document indicates that contractors are required to offer transit buses and associated optional equipment at the predetermined prices set forth in the contract price list, with specifications supplementing the minimum requirements outlined in Contract Section 3.2 Transit Bus Requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4052323170HowToUse.pdf | ||
| 4052323170ra.pdf | ||
| 4052323170ExtensionOfUse.pdf | ||
| 4052323170p.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Summary
Group 40523-23170, BUSES, TRANSIT (Adult Passenger) Attachment 1: Contract Pricelist (Updated 11/15/2024) (corrected November 25, 2024) A summary of the Lots and awarded Transist Buses is on this page. The following pages include specifications for the awarded Transit Buses and associated Optional Equipment, which are supplemental to the minimum specifications set forth in Contract Section 3.2 Transit Bus Requirements. The Contractors shall offer the Transit Buses and associated Optional Equipment awarded for each Lot at the Base Item Unit Prices and Optional Equipment Unit Prices set forth in this contract price list.
| LOT | LOT A | LOT B | LOT C | LOT D | LOT E | ||
| Lot/Item Description | Low Floor Vehicle <10,000 lb. | ||||||
| High Headroom Wagon <10,000 lb. | High Headroom Wagon <10,000 lb. (Flexible Floor Plan) | Dual Rear Wheel Cutaway <22ft. | Dual Rear Wheel Cutaway <22 ft. | ||||
| Min. Passenger Capacity | |||||||
| [Ambulatory (A) plus Wheelchairs (WC)] | 4 Passenger [3A/1WC] | 7 Passenger [5A/1WC] | 7 Passenger [6A/1WC] | 9 Passenger [8A/1WC] | 11 Passenger [10A/1WC] | ||
| Contractor | No Award | Fenton Mobility Products,Inc. | Fenton Mobility Products,Inc. | Coach & Equipment Bus Sales, Inc. | Coach & Equipment Bus Sales, Inc. | ||
| Contract Number | PC69000 | PC69000 | PC69530 | PC69530 | |||
| Chassis Make | Ford | Ford | Ford | Ford | |||
| Chassis Model | Transit 350 | Transit 350 | E350 | E350 | |||
| Chassis Model Code | X2X | X2X | E3F | E3F | |||
| Body Make | Ford | Ford | Coach and Equipment | Coach and Equipment | |||
| Body Model | Transit 350 | Transit 350 | Phoenix | Phoenix | |||
| Body Model Code | X2X | X2X | OAL 251 | OAL 263 | |||
| Base Item Unit Price | $72,209.52 | $77,075.70 | $94,116.90 | $97,241.60 | |||
| Estimated Delivery Time | 168-210 Days ARO | 168-210 Days ARO | 180-220 Days ARO | 180-220 Days ARO |
| LOT | LOT F | LOT G | LOT H | LOT I | LOT J |
| Lot/Item Description | Low Floor Cutaway | Dual Rear Wheel Cutaway >22 ft. | Dual Rear Wheel |
Cutaway >22 ft.
| (Electric) | Medium Duty Cutaway (Alternate Fuels) | Conventional Style | ||||
| Min. Passenger Capacity | ||||||
| [Ambulatory (A) plus Wheelchairs (WC)] | 17 Passenger [15A/2WC] | 16 Passenger [14A/2WC] | 16 Passenger | |||
| [14A/2WC] | 20 Passenger [18A/2WC] | 24 Passengers [22A/2WC] | ||||
| Contractor | No Award | Coach & Equipment Bus Sales, Inc. | No Award | Matthews Bus Alliance, Inc. |
DBA Matthews Buses
| Commercial | Matthews Bus Alliance, Inc. DBA Matthews Buses Commercial | ||||
| Contract Number | PC69530 | PC69001 | PC69001 | ||
| Chassis Make | Ford | Ford | Freightliner Custom Chassis | ||
| Chassis Model | E450 | F-550 | S2C | ||
| Chassis Model Code | E4F | XLT | N/A | ||
| Body Make | Coach and Equipment | StarTrans Bus | StartTrans Bus | ||
| Body Model | Phoenix | Senator II HD | PS/2 | ||
| Body Model Code | OAL 290 | 365 OAL | PS/2 382" | ||
| Base Item Unit Price | $104,596.83 | $155,700.60 | $193,638.56 | ||
| Estimated Delivery Time | 180-220 Days ARO | 150-210 Days ARO | 150-210 Days ARO |
| LOT | LOT K | LOT L | LOT M | ||
| Lot/Item Description | Conventional Style | Low Floor | |||
| (Front Engine) | LOT M: Low Floor |
(Rear Engine)
| Min. Passenger Capacity | |||||
| [Ambulatory (A) plus Wheelchairs (WC)] | 28 Passengers [26A/2WC] | 25 Passenger [23A/2WC] | 35 Passenger [33A/2WC] | ||
| Contractor | Matthews Bus Alliance, Inc. DBA Matthews Buses Commercial | No Award | No Award | ||
| Contract Number | PC69001 | ||||
| Chassis Make | Freightliner Custom Chassis | ||||
| Chassis Model | S2C | ||||
| Chassis Model Code | N/A | ||||
| Body Make | StartTrans Bus | ||||
| Body Model | PS/2 | ||||
| Body Model Code | PS/2 424" | ||||
| Base Item Unit Price | $201,786.75 | ||||
| Estimated Delivery Time | 150-210 Days ARO |
LOT B
| GROUP 40523-23170, BUSES, TRANSIT (Adult Passenger) | Attachment 1: Contract Pricelist Rev. November 15, 2024 | |
| Contractor: | Fenton Mobility Products, Inc. | |
| LOT B | ||
| High Headroom Wagon <10,000 lb., 7 Passenger [5A/1WC] |
| PART 1: Product information for the Base Item awarded | ||
| Chassis Make | The OEM company name of the Chassis Model. | Ford |
| Chassis Model | A particular brand of Chassis sold by an OEM. | Transit 350 |
| Chassis Model Code | The OEM code used to identify a particular subset of a Chassis Model. | X2X |
| Body Make | The OEM company name of the Body Model. | Ford |
| Body Model | A particular brand of Body sold by an OEM. | Transit 350 |
| Body Model Code | The OEM code used to identify a particular subset of a Body Model. | X2X |
| PART 2: Base Item Unit Price | ||
| Base Item Unit Price | “Base Item Unit Price” is the per unit NYS Contract Price for the Transit Bus described in the Base Item Specifications and includes any OEM fees, all customs duties and charges, all vehicle preparation and clean-up charges, NYS DMV and DOT inspection, installation charges, delivery and all other incidentals normally included with providing a Transit Bus, but excludes Optional Equipment. Pursuant to Appendix B §33, Shipping/Receipt of Product, freight terms are F.O.B. Destination. See Contract Section 3.1.1 Price and 3.1.4 Contract Pricelist for additional information about Contract pricing. | $72,209.52 |
| PART 3: Base Item Specifications | ||||
| The terms and conditions in Contract Section 3.2 Transit Bus Requirements shall be considered minimum requirements for the Transit Bus provided by the Contractor. Supplemental required specifications for the Transit Buses awarded for this Lot are listed below. The actual Transit Bus awarded may exceed the minimum specifications listed below. | ||||
| Category | Specification | Information provided in Column D | Spec for Equipment Provided | |
| General | Capacity: Minimum five (5) adult passenger seats, plus one (1) wheelchair station | Capacity: | 5 amb plus 1 wc | |
| General | Floor plan matches "Figures" tab. The floor plan shall provide a minimum of 27.5" hip-to-knee for all seated positions, with the wheelchair footprint a minimum of 50" x 30". | Manufacturer Floor Plan #: | Lot B Rear/ Lot B Side | |
| General | Drive configuration: High Headroom Passenger Wagon or MPV | |||
| General | Have completed federal STURAA (Altoona) bus testing of not less than four (4) years/100,000 miles or have been certified as exempt as specified under FTA provisions. | |||
| General | Original "as built" vehicle shall be manufactured and classified as a passenger vehicle. | |||
| General | Shall be in compliance as defined as ambulettes under NYCRR Part 720-721 regulations | |||
| General | GVWR: 9,000 lb. minimum. The OEM’s original rating and no other rating for the GVWR shall be used. | GVWR [lb.]: | 9,250 lbs. | |
| General | Wheelbase: 148" (plus or minus 3”) | Wheelbase [inches]: | 148" | |
| General | Minimum 75” continuous passenger aisle headroom | Headroom [inches]: | 77" | |
| General | Shall include an “Electronic Stability Control" system that improves stability by detecting and reducing loss of traction. | |||
| Chassis (see specifications below) | ||||
| Engine | Minimum 3.5 liter V6 gasoline engine rated minimum 250 HP x 250 lb. ft. torque. | Number of Cylinders: | 6 | |
| Liters: | 3.5 | |||
| Horsepower and Torque: | 271 hp 260 ft lbs | |||
| Engine | Ready access to engine compartment is required for servicing and routine maintenance of engine and engine components. | |||
| Fuel Tank | Nominal (plus or minus 2 gallons) 25-gallon tank | Tank Size [Gallons]: | 25 | |
| Cooling System | Chassis manufacturers heaviest duty cooling system available for Chassis supplied and protected to minus 30°F | |||
| Electrical | Heavy Duty OEM, minimum 220 amp, alternator | Alternator Capacity [amps]: | 250 | |
| Electrical | Dual Heavy Duty Batteries, minimum 1300 CCA total, which shall have protective rubber jacket at connection terminals (pigmented red to indicate positive and black to indicate negative); | Rating of Batteries [at 0°F]: | 650 min 70 ah | |
| CCA each battery: | 650 min 70 ah | |||
| Minutes RC: | 120 70 ah | |||
| Electrical | Manufacturer’s standard dash-mounted gauges (not lights) | |||
| Transmission | 10-speed automatic transmission | Transmission Model #: | 10 Speed Auto OD | |
| Front Axle | OEM Front Gross Axle Weight Rating (FGAWR) | FGAWR [lb.]: | 4230 min | |
| Rear Axle | OEM Rear Gross Axle Weight Rating (RGAWR) | RGAWR [lb.]: | 5515 min | |
| Suspension | Chassis manufacturer’s heaviest duty suspension system (front and rear) available for GVWR specified. | |||
| Suspension | OEM supplied | Front Spring Rating [lb.]: | 2065 min | |
| Rear Spring Rating [lb.]: | 2757.50 min | |||
| Shock Absorbers | Heavy Duty | Make and Model #: | McPherson | |
| Brakes | ABS power brakes meeting FMVSS 49CFR571.105 | Service Brakes [total lining or sweep area] both front & rear: | 329.68 Front Sweep Area / 302 Rear Sweep Area 631.68 Total Sweep | |
| Parking Brake | Foot-or hand-operated parking brake | |||
| Tires/Rims | OEM supplied Steel Wheel with Full Silver Wheel Covers plus all-season radial tread or rib tread w/mud and snow rear, as required to meet the GVWR specified. A full size spare tire and rim shall be included. | Radial Tires [size]: | 235/65R16C 121/119 R BSW all-season | |
| Radial Tires [load]: | 3195 lbs | |||
| Radial Tires [range]: | E | |||
| Radial Tires [manufacturer]: | Continental | |||
| Front Tires [tread design]: | All Season Radial | |||
| Front Tires [capacity/tire]: | 3195 lbs | |||
| Rear Tires [tread design]: | All Season Radial | |||
| Rear Tires [capacity/tire]: | 3195 lbs | |||
| Front Bumper | Front bumper may be OEM chrome or high density rubber/plastic and affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Front Bumper [material]: | Plastic | |
| Front Bumper [manufacturer]: | Ford | |||
| Rear Bumper | Rear bumper shall be OEM Chassis supplied carbon or high density rubber/plastic and shall be affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Rear Bumper [material]: | Plastic | |
| Rear Bumper [manufacturer]: | Ford | |||
| License Plates | Provisions shall be made for the mounting of standard U.S. license plates on the front and rear of the Transit Bus and shall comply with SAE J686. | |||
| Steering | Power steering with adjustable steering wheel | Turning Diameter [at end of front bumper]: | 48' | |
| Interior Equipment | OEM dash air conditioning, defroster, and heating system | |||
| Interior Equipment | OEM rear view camera | |||
| Radio | Chassis Manufacturer's standard AM/FM Digital Clock Radio, with four (4) cabin speakers. | Manufacturer: | Ford | |
| Model #: | Audio Pack 318 | |||
| Exterior Equipment | OEM cruise control | |||
| Exterior Equipment | Standard OEM horn(s) | |||
| Head Lights | OEM standard includes daytime running headlights | |||
| Exterior Equipment | Reflectors | |||
| Exterior Equipment | Exhaust system shall meet current USEPA emission requirements. | |||
| Miscellaneous | Minimum two (2) OEM keys or fobs | |||
| Body (see specifications below) | ||||
| Driver/Front Passenger Doors | Standard Factory OEM equipment | |||
| Passenger/Lift Door | Power sliding curb side (right side) door with window. Minimum clear dimensions shall be 62" vertical and 50" horizontal | Dimensions [inches]: | 62" Late Availability on Power | |
| Windows | OEM supplied windows all around | |||
| Body Structure | Shall be a Unibody construction design. Provisions shall be made to ensure full side airbag deployment with all required specified equipment (wheelchair lift, barriers, etc.). Certification of compliance with all FMVSS for passenger vehicles under 10,000 lb., plus documentation consisting of detailed explanation and dimensional drawing supporting the Body structures shall be supplied with bid submission. | Exterior Siding [material/thickness]: | Steel .040 +/- .015 | |
| Interior Paneling [material/thickness]: | Plastic .125 +/- .050 | |||
| Insulation | ||||
| [material/R Value]: | Insulation OEM Ford | |||
| Drive Shaft Guard(s) | Metal Guard(s) in accordance with NYSDOT Title 17 720.4 (Y) (1) (h) | Drive Shaft Guards [quantity]: | 1 | |
| Exterior Equipment | Reverse alarm | |||
| Exterior Lighting (Brake; Turn Signal; Clearance; Back Up; Tail; License Plate) | All exterior Body lights must meet current SAE standards and be armored (or low-profile design or sufficiently Body-recessed) to provide protection from impact of branches, etc. Rear brake lights include a third light installed over the rear emergency door. | |||
| Mud Flaps (Front and Rear) | Shall be manufacturers standard. Labeling and advertising is prohibited, other than for necessary safety information | |||
| Exterior Mirrors | Driver's side and curbside exterior mirrors shall be heated and remote controlled. Each mirror head shall be constructed of high impact ABS and include a flat and convex feature. | Manufacturer: | Ford | |
| Model #: | 545 | |||
| Interior Mirror | OEM rear view mirror shall be provided | |||
| Floor Assembly | Shall be insulated and shall include a minimum 5/8” thick marine grade plywood, or 3/4" Advantech sub-floor, or Compatible Equivalent. A light colored (e.g. light gray), floor covering shall have a non-slip surface that remains effective in all weather conditions and meet FMVSS 302 and ADA requirements. | |||
| Floor Covering Material | Shall be a durable nonskid transit type flooring. | |||
| Entrance Step | Shall be a low height (lowest practical) running board, installed on the curb (right) side, continuous full length for entry assist at both the front of the sedan and side sliding doors. | Top of first step above ground [inches]: | 11"-12" | |
| Door Entry Grab Rails (right and left side) | If not OEM supplied, dual entry grab rails shall be installed on each side of the designated entry door, parallel to the steps. Handrails shall be securely fastened. A minimum 1 1/4" diameter, with a high visible yellow stainless steel powder coated material, or non-slip Compatible Equivalent shall be used. | |||
| Twin Rear Doors | OEM twin doors shall be located in the rear of the Transit Bus and when used as an emergency exit door, in compliance with FMVSS 571.217 and title 17 NYCRR Part 720.5 and 720.8 requirements. When the Transit Bus is designed such that the emergency door can be locked and not unlocked when the door latch is operated, then an interlock system must be installed to prevent the propulsion unit from starting, or after the Transit Bus is started, then an audible or visible alarm must be activated. If an interior locking device (vandal lock or equivalent) is provided for emergency exit door(s), then appropriate interlocking must be provided as indicated above. Each door shall include a window and a positive fastening device to hold door in the open position (“hold open” feature) when a rear wheelchair lift is installed. A reflective device for each door shall occupy at least fourteen (14) square inches and provide maximum visibility when the doors are open. | |||
| Padded Panels | Shall be provided, attached to a vertical and horizontal stanchions where appropriate. The gap between the floor and bottom of the panel shall be 5" (plus or minus .5") | |||
| Insulation | OEM supplied in walls and ceiling. | |||
| Wheelchair Lift Door | Wheelchair area opening height shall be a minimum of 56". All items, including lighting, shall be in compliance with ADA and FMVSS 403 & 404. | Opening Height [inches]: | 68" Rear Door, 56" Side Door | |
| Wheelchair Lift | The wheelchair lift shall be a rear-mounted, automatic electric/hydraulic type (power-up, gravity down) using dual hydraulic cylinders. The hydraulic reservoir capacity shall be at least one (1) quart, with easy access for inspection and servicing. The maximum power draw shall not exceed 70 amps at 12 volts. Wheelchair lift unit shall be a Public Use Lift and shall be installed in accordance with manufacturer’s standards. The lift must have a fail safe system that allows stowing if any solenoid seizes. A manual method to raise and stow the lift shall be provided in the event of a power failure. | Manufacturer: | Braun | |
| Model #: | NCL 1000 |
| Wheelchair Lift | Shall be capable of a minimum of 2500 cycle operation with a minimum of 1000 lb. lift capacity. | ||
| Wheelchair Lift | Platform size shall be minimum 34" x 54" (of useable space) and lift capacity shall be minimum 1,000 lb. Wheelchair lift platform shall be constructed of expanded metal grating with left and right side 2 1/2" high safety stops plus a spring loaded or power activated ADA front stop. A pendent type operating control with a cable length sufficient to allow operation of lift at outermost platform position shall be provided. Lift platform shall be automatic power fold/unfold design. | Platform Size [inches]: | 34" x 54" |
| Wheelchair Lift | A transmission interlock system that utilizes intermittent fault filter technology shall be installed to prevent operation of the lift unless door(s) are opened and transmission is in park with parking brake applied. A manual override system in case of power failure shall also be provided. Lift electric system shall be protected with fuse or circuit breaker. | Manufacturer: | Intermotive |
| Model #: | ILISC515-AD |
| Wheelchair Lift | The spring load, deck end, stop shall be retracted while the lift deck is in the load/unload (down) position. This shall enable the operator to load the lift without holding the stop in its retracted position. | ||
| Wheelchair Lift | Two (2) folding handrails on lift platform shall be provided. Handrails shall not reduce platform size. | ||
| Wheelchair Lift | Labeled dash mounted visual alarm (in compliance with Chapter VI, Article III, Parts 720/721, NYCRR) to indicate special service door is not fully closed, shall be provided. | ||
| Wheelchair Lift Barrier | Protective panel shall be provided as needed to prevent shearing action between the lift platform and Transit Bus floor or door jams in conformance with Title 17 NYCRR Part 720.8(a)(3)(b). | ||
| ADA Compliance | All features required for a demand-response application shall be included in accordance with 49 CFR Subtitle A Subpart B (excluding paragraphs 38.33 Fare box, 38.35 Public information system, 38.37 Stop request, and 38.39 Destination and route signs). | ||
| Lighting- Driver Dome Light | OEM supplied | ||
| Lighting (Interior) | Overhead, entrance, step well, and lift lights shall provide no less than two (2) foot-candles of illumination on the entrance step tread, or lift or ramp platform with the door open. Outside light(s) shall provide at least one (1) foot-candle of illumination on the street surface with three (3) feet of step tread outer edge. This system shall provide illumination automatically when the door is open and meet ADA requirements. | ||
| Lighting (Interior) | Overhead entrance and step well lights shall be wired to and be automatically activated by a door controlled switch. Lights shall operate any time the ignition key is on and the door is opened. | ||
| Lighting (Interior) | Interior lighting shall provide a minimum of two (2) foot-candles of illumination at reading level. Interior lighting fixtures shall be reasonably flush with the interior walls and ceiling so no hazard exists for passengers. All interior lights shall be grounded by an in-harness ground attached in the fuse panel to a common grounding point. | ||
| Interior Trim and Padding | All interior panel joints shall be covered with matching trim strips or moldings and all sharp edges, protrusions, corners etc. shall be finished in such a manner to prevent possible injury. (If vacuum lamination is used, joints shall be securely bonded and provide a finished appearance). Any exposed wheelchair lift support brackets, air conditioner units or other similar items shall be padded to prevent injury. | ||
| Heater(s) | Sufficient BTU capacity of front and rear under seat heaters shall be provided to attain a 50°F temperature rise from a mean ambient winter temperature of 21°F. Interior temperature shall be uniform throughout passenger compartment area by the use of heat registers in the floor structure. | Manufacturer: | Ford |
| Model #: | STD Factory |
Air Conditioning Air conditioning system that shall be designed with sufficient BTU cooling capacity to provide a balanced cooling system capable of maintaining a 75°F inside temperature vs. an outside temperature 95°F and a relative humidity of 50%, with ability to continuously decrease temperature inside the Transit Bus (as measured from the approximate Transit Bus center) a minimum of 1°F for every ninety (90) seconds. (Air Conditioner Manufacturer’s Certification that performance requirement for Transit Bus type can be met must be submitted with bid).
| Air Conditioning | The cabin evaporator shall include directional and adjustable discharge ports. It shall be floor mounted toward the rear of the Transit Bus. Any sharp edges and/or exposed metal associated with the AC unit must have these edges/surfaces appropriately padded to provide for passenger protection. Aisle height requirements will be measured from a point directly in front of the AC unit. | ||
| Air Conditioning | Each air conditioning system shall use R134A refrigerant. All system components subject to corrosion from moisture shall be aluminum, copper, stainless steel, galvanized, or epoxy coated. All exterior exposed air conditioning electrical connections must utilize weather pac plugs or Compatible Equivalent. An air intake screen shall be installed on the skirt of the Transit Bus to ensure sufficient airflow through the skirt mounted condenser coil. All hoses shall be supported at a maximum of twenty-four (24) inch intervals by clamps. | ||
| Driver Seat | Driver's seat shall be high back; fully adjustable (vertically and horizontally with electric or air power seat pedestal); include lumbar support; suspension seating (minimally spring suspension); foam padded; fabric upholstered; w/retractable 3-point lap/shoulder seat belt (in compliance with FMVSS 209 & 210). Seat color shall complement interior seating color. | Manufacturer: | Ford |
| Model #: | 21 |
| Front Passenger Seat | Co-pilot (front passenger) seat shall be OEM supplied, matching driver seat (except vertical adjustment). | ||
| Seating | Upholstered transit type seats for a minimum of six (6) adult passengers. See specifications below and floor plan attached (Figures). | ||
| Seating | Seat assemblies and components of identical seats shall be mechanically interchangeable. | ||
| Seating | Seats aft of driver shall be mid-high back, adult passenger seats shall be supplied in individual passenger modules, Freedman model "GO Seat ES", or other Compatible Equivalent. All ambulatory seats shall be forward facing. Seat cushions per passenger shall be a minimum of 17” in width and 17” in depth, and seat back shall be a minimum of 24” in height, excluding the grab handle. All cushions and seat back covers shall have easily removable covers, replaceable without removing the seat from the Transit Bus. All seat cushions shall have identical upholstery and a spring suspension system. Seats shall have a swing-up armrest securely attached to the aisle end of each seat. | Manufacturer: | Freeman |
| Model # (foldaway): | 43705 | ||
| Model # (single seat): | NA | ||
| Seating | Seats aft of driver shall include three (3) two-passenger foldaway seats. Freedman model "GO ES Space Saver" seat or other Compatible Equivalent. Seats shall have a swing-up armrest securely attached to the aisle end of each seat. Minimum seat widths shall be 34” double seats. Aisle width shall be a minimum of 10”. | Single Seat Width [inches]: | NA |
| Double Seat Width [inches]: | 34 | ||
| Minimum Aisle Width [inches]: | 10 | ||
| Seating | Entire seat frame, except mounting brackets, shall be enclosed in energy absorbing materials. Seat covers shall be transit grade vinyl, 36 oz. per linear yard (Cameo/Predictions), or Compatible Equivalent, or transit grade fabric produced from Marquesa Lana Yarns-Interweave, or Bus Textil Level 3, or Compatible Equivalent. All cover materials must meet FMVSS 302 flammability requirements. Seat foam must meet ASTM D-3675 Radiant Flammability Test. | ||
| Seating | An approved retractable style integrated 3-point lap and shoulder seat belt shall be provided for each seating space and shall be in compliance with FMVSS 209 & 210. Belt retractors must not interfere with seating space, and two (2) seat belt extensions shall be provided with each Transit Bus. | ||
| Seating | Molded Top Grab handles/grab rails shall be provided on seat backs of all seats and shall be mounted/welded to seat frame structure. | ||
| Wheelchair & Wheelchair Occupant Restraints | One (1) Wheelchair Restraint System (Wheelchair and Wheelchair Occupant) shall be provided and installed and designed for "L" track systems. Occupant restraint system (including lap belt, shoulder belt with height adjustment, floor inserts, retractable wheelchair restraint/tie-downs, and restraint mounting hardware) meeting the required 30" wide x 48" long ADA envelope (or amendments thereto) adjacent to lift at rear of Transit Bus and ADA wheelchair space maneuvering clearances (or any amendments thereto). Wheelchair restraint/tie-downs (retractable), lap belt, and shoulder belt with height adjustment shall be in compliance with FMVSS 209 210, shall be forward facing, and shall be a Q-Straint Q-10007 or Sur-Lok AL812S-4C, or Compatible Equivalents. Individual storage pouch shall be provided to completely secure belts/straps on Transit Bus sidewalls when not in use. All items shall be installed in accordance with manufacturer’s standards and be in compliance with ADA, SAE Standard J2249, ANSI/RESNA WC-18, and ISO Standard 10542. Instructions on use of the wheelchair restraint system shall be affixed to the Transit Bus interior at a minimum of one (1) restraint position. | Manufacturer: | Q Straint |
| Model #: | Q-10007 / QS00073 |
| Miscellaneous | Fire Extinguisher (2.5 lb. U/L or Factory Mutual Laboratories approved), First Aid Kit (10 unit), ICC Reflectors, Fire Blanket (bagged and mounted), and a Seat Belt Cutter shall be provided and shall be in compliance with FMVSS regulations and Title 17 NYCRR Part 720.7(a). Items shall be located in a readily accessible location to the driver (seat belt cutter must be accessible while driver is in belted driver’s seat position) in the front entry area of the Transit Bus. Equipment location shall be clearly identified. | ||
| Miscellaneous | OEM supplied storage shelf shall be provided over the windshield. | ||
| Equipment Warranty | All equipment furnished under this contract (unless otherwise noted) must have a minimum warranty period of one (1) year regardless of mileage. | ||
| Chassis Warranty | Minimum of three (3) years, 36,000 miles | Chassis Warranty [years]: | 3 Years |
| Chassis Warranty [miles]: | 36,000 | ||
| Body Warranty | Covering the integrity of the Transit Bus Body internal steel frame structure (including corrosion damage) and/or fatigue failure for a period of four (4) years or 100,000 miles. | Body Warranty [years]: | 4 Years min |
| Body Warranty [miles]: | 100,000 | ||
| Air Conditioning Warranty | The cabin air conditioning system shall be supported by a two (2) year, unlimited mileage warranty. The Chassis OEM air conditioning system coverage falls under the Chassis warranty. | Air Conditioning Warranty [years]: | 3 Years |
| Wheelchair Lift Warranty | The lift shall be fully guaranteed by the manufacturer for twelve (12) months (with no mileage or hour limits) and any in-warranty service required shall be performed without charge to using agency. |
| PART 4: Optional Equipment Specifications and Pricing | ||||
| An Authorized User may choose one (1) or more of the Optional Equipment from the list of below, for the Transit Bus awarded for the Lot. The Contractor shall be required to honor all such requests, provided that adding the requested combination of Optional Equipment results in a Transit Bus that meets the minimum specifications stated in Contract Section 3.2 Transit Bus Requirements. See Section 3.1.3 Optional Equipment Unit Price for pricing information relative to Optional Equipment. | ||||
| Optional Equipment | Specification | Information provided in Column D | Spec for Equipment Provided | Optional Equipment Unit Price |
| Wheelchair Lift, Side Mount Installation | In lieu of the standard rear-mounted wheelchair lift in the Base Item, supply and install a wheelchair lift in the OEM powered side sliding door, curb-side. Lift platform size shall be minimum 34" x 51" (of useable space) and lift capacity shall be a minimum of 800 lb. Wheelchair lift platform shall be constructed of expanded metal grating with left and right side 2 1/2" high safety stops plus a spring loaded or power activated ADA front stop. A pendent type operating control with a cable length sufficient to allow operation of lift at outermost platform position shall be provided. Lift platform shall be automatic power fold/unfold design, and capable of a minimum of 2500 cycle operation with a minimum of 800 lb. lift capacity. | Manufacturer: | Braun | -$303.84 |
| Model #: | NCL919 | |||
| Platform Size [inches]: | 34' x 51" | |||
| Lift Capacity [lb.]: | 800 lbs. | |||
| Cycle Operation: | 2500 |
| Optional Wheelchair Restraint System | For each wheelchair position in the Base Item, plus additional optional restraint systems, if ordered, install complete "Omni" style floor securements and complete belts kits, Q-Straint Q-10008 or Sur-Lok AL860S-4C-SNC, or Compatible Equivalent. | Manufacturer and Model #: | Q-10008 | $987.48 |
| Additional Wheelchair Restraint System | Price one (1) additional wheelchair station above the quantity required in the Base Item. Price is per position to include all belts, floor/shoulder hardware, and storage container. | $987.48 | ||
| Camera Security System- 6 monitor | Provide and install a complete camera recording system, including software kit. Components include an eight (8) channel DVR capable of vertical or horizontal installation, plus simultaneous video recording for all camera heads. DVR shall be "user" programmable to record a minimum of five (5) Transit Bus functions (signals) such as brake lights, turn signal, wheelchair lift, etc. A driver trip feature shall also be included. Camera heads to include a minimum of two (2) exterior heads @ 600 TV lines resolution, with infrared feature and no audio, plus four (4) interior camera heads @ 600 TV lines resolution, with infrared and audio. Install kit shall be universal for one (1) or more Transit Buses with matching camera system. Minimum components include software, mouse, 5-6" monitor (or DVR viewing software), HDD USB docking station, HDD adapter, and BNC F-RCA adapter. A compatible system is acceptable provided all functionality is maintained. | Manufacturer and Model # of DVR: | Angel Trax V12-1200 | $3,646.10 |
| Manufacturer and Model # of interior camera head: | Angel Trax HD 2500 | |||
| Manufacturer and Model # of exterior camera head: | Angel Trax HD 3500 |
LOT C
| GROUP 40523-23170, BUSES, TRANSIT (Adult Passenger) | Attachment 1: Contract Pricelist Rev. November 15, 2024 (corrected November 25, 2024) | |
| Contractor: | Fenton Mobility Products Inc. | |
| LOT C | ||
| High Headroom Wagon <10,000 lb. (Flexible Floor Plan) 7 Passenger [6A/1WC] |
| PART 1: Product information for the Base Item awarded | ||
| Chassis Make | The OEM company name of the Chassis Model. | Ford |
| Chassis Model | A particular brand of Chassis sold by an OEM. | Transit 350 |
| Chassis Model Code | The OEM code used to identify a particular subset of a Chassis Model. | X2X |
| Body Make | The OEM company name of the Body Model. | Ford |
| Body Model | A particular brand of Body sold by an OEM. | Transit 350 |
| Body Model Code | The OEM code used to identify a particular subset of a Body Model. | X2X |
| PART 2: Base Item Unit Price | ||
| Base Item Unit Price | “Base Item Unit Price” is the per unit NYS Contract Price for the Transit Bus described in the Base Item Specifications and includes any OEM fees, all customs duties and charges, all vehicle preparation and clean-up charges, NYS DMV and DOT inspection, installation charges, delivery and all other incidentals normally included with providing a Transit Bus, but excludes Optional Equipment. Pursuant to Appendix B §33, Shipping/Receipt of Product, freight terms are F.O.B. Destination. See Contract Section 3.1.1 Price and 3.1.4 Contract Pricelist for additional information about Contract pricing. | $77,075.70 |
| PART 3: Base Item Specifications | ||||
| The terms and conditions in Contract Section 3.2 Transit Bus Requirements shall be considered minimum requirements for the Transit Bus provided by the Contractor. Supplemental required specifications for the Transit Buses awarded for this Lot are listed below. The actual Transit Bus awarded may exceed the minimum specifications listed below. | ||||
| Category | Specification | Information provided in Column D | Spec for Equipment Provided | |
| General | Capacity: Minimum six (6) adult passenger seats, plus one (1) wheelchair station | Capacity: | 6 Amb 1 wc | |
| General | Floor plan matches "Figures" tab. The floor plan shall provide a minimum of 27.5" hip-to-knee for all seated positions, with the wheelchair footprint a minimum of 50" x 30". | Manufacturer Floor Plan #: | AbiliTrax Rear Lift, Abilitrax Side Lift, Abilitrax Shift n Step | |
| General | Transit Bus may be ordered with either a side-mounted or rear-mounted wheel chair lift. | |||
| General | Drive configuration: High Headroom Passenger Wagon or MPV | |||
| General | Have completed federal STURAA (Altoona) bus testing of not less than four (4) years/100,000 miles or have been certified as exempt as specified under FTA provisions. | |||
| General | Original "as built" vehicle shall be manufactured and classified as a passenger vehicle. | |||
| General | Shall be in compliance as defined as ambulettes under NYCRR Part 720-721 regulations | |||
| General | GVWR: 9,000 lb. minimum. The OEM’s original rating and no other rating for the GVWR shall be used. | GVWR [lb.]: | 9250 lbs. | |
| General | Wheelbase: 148" (plus or minus 3”) | Wheelbase [inches]: | 148" | |
| General | Minimum 75” continuous passenger aisle headroom | Headroom [inches]: | 77" | |
| General | Shall include an “Electronic Stability Control" system that improves stability by detecting and reducing loss of traction. | |||
| Chassis (see specifications below) | ||||
| Engine | Minimum 3.5 liter V6 gasoline engine rated minimum 250 HP x 250 lb. ft. torque. | Number of Cylinders: | 6 | |
| Liters: | 3.5 | |||
| Horsepower and Torque: | 271 hp 260 ft lbs | |||
| Engine | Ready access to engine compartment is required for servicing and routine maintenance of engine and engine components. | |||
| Fuel Tank | Nominal (plus or minus 2 gallons) 25-gallon tank | Tank Size [Gallons]: | 25 | |
| Cooling System | Chassis manufacturers heaviest duty cooling system available for Chassis supplied and protected to minus 30°F | |||
| Electrical | Heavy Duty OEM, minimum 220 amp, alternator | Alternator Capacity [amps]: | 250 | |
| Electrical | Dual Heavy Duty Batteries, minimum 1300 CCA total, which shall have protective rubber jacket at connection terminals (pigmented red to indicate positive and black to indicate negative); | Rating of Batteries [at 0°F]: | 650 min 70 ah | |
| CCA each battery: | 650 min 70 ah | |||
| Minutes RC: | 120 70 ah | |||
| Electrical | Manufacturer’s standard dash-mounted gauges (not lights) | |||
| Transmission | 10-speed automatic transmission | Transmission Model #: | 10 Speed Auto OD | |
| Front Axle | OEM Front Gross Axle Weight Rating (FGAWR) | FGAWR [lb.]: | 4230 min | |
| Rear Axle | OEM Rear Gross Axle Weight Rating (RGAWR) | RGAWR [lb.]: | 5515 min | |
| Suspension | Chassis manufacturer’s heaviest duty suspension system (front and rear) available for GVWR specified. | |||
| Suspension | OEM supplied | Front Spring Rating [lb.]: | 2065 min | |
| Rear Spring Rating [lb.]: | 2757.50 min | |||
| Shock Absorbers | Heavy Duty | Make and Model #: | McPherson | |
| Brakes | ABS power brakes meeting FMVSS 49CFR571.105 | Service Brakes [total lining or sweep area] both front & rear: | 329.68 Front Sweep Area / 302 Rear Sweep Area 631.68 Total Sweep | |
| Parking Brake | Foot-or hand-operated parking brake | |||
| Tires/Rims | OEM supplied Steel Wheel with Full Silver Wheel Covers plus all-season radial tread or rib tread w/mud and snow rear, as required to meet the GVWR specified. A full size spare tire and rim shall be included. | Radial Tires [size]: | 235/65R16C 121/119 R BSW all-season | |
| Radial Tires [load]: | 3195 lbs | |||
| Radial Tires [range]: | E | |||
| Radial Tires [manufacturer]: | Continental | |||
| Front Tires [tread design]: | All Season Radial | |||
| Front Tires [capacity/tire]: | 3195 lbs | |||
| Rear Tires [tread design]: | All Season Radial | |||
| Rear Tires [capacity/tire]: | 3195 lbs | |||
| Front Bumper | Front bumper may be OEM chrome or high density rubber/plastic and affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Front Bumper [material]: | Plastic | |
| Front Bumper [manufacturer]: | Ford | |||
| Rear Bumper | Rear bumper shall be OEM Chassis supplied carbon or high density rubber/plastic and shall be affixed to Body using corrosion resistant material hardware with rustproofing applied to finished installation. | Rear Bumper [material]: | Plastic | |
| Rear Bumper [manufacturer]: | Ford | |||
| License Plates | Provisions shall be made for the mounting of standard U.S. license plates on the front and rear of the Transit Bus and shall comply with SAE J686. | |||
| Steering | Power steering with adjustable steering wheel | Turning Diameter [at end of front bumper]: | 48' | |
| Interior Equipment | OEM dash air conditioning, defroster, and heating system | |||
| Interior Equipment | OEM rear view camera | |||
| Radio | Chassis Manufacturer's standard AM/FM Digital Clock Radio, with four (4) cabin speakers. | Manufacturer: | Ford | |
| Model #: | Audio Pack 318 | |||
| Exterior Equipment | OEM cruise control | |||
| Exterior Equipment | Standard OEM horn(s) | |||
| Head Lights | OEM standard includes daytime running headlights | |||
| Exterior Equipment | Reflectors | |||
| Exterior Equipment | Exhaust system shall meet current USEPA emission requirements. | |||
| Miscellaneous | Minimum two (2) OEM keys or fobs | |||
| Body (see specifications below) | ||||
| Driver/Front Passenger Doors | Standard Factory OEM equipment | |||
| Passenger/Lift Door | Power sliding curb side (right side) door with window. Minimum clear dimensions shall be 62" vertical and 50" horizontal | Dimensions [inches]: | 62" Late Availability on Power | |
| Windows | OEM supplied windows all around | |||
| Body Structure | Shall be a Unibody construction design. Provisions shall be made to ensure full side airbag deployment with all required specified equipment (wheelchair lift, barriers, etc.). Certification of compliance with all FMVSS for passenger vehicles under 10,000 lb., plus documentation consisting of detailed explanation and dimensional drawing supporting the Body structures shall be supplied with bid submission. | Exterior Siding [material/thickness]: | Steel .040 +/- .015 | |
| Interior Paneling [material/thickness]: | Plastic .125 +/- .050 | |||
| Insulation | ||||
| [material/R Value]: | Insulation OEM Ford | |||
| Drive Shaft Guard(s) | Metal Guard(s) in accordance with NYSDOT Title 17 720.4 (Y) (1) (h) | Drive Shaft Guards [quantity]: | 1 | |
| Exterior Equipment | Reverse alarm | |||
| Exterior Lighting (Brake; Turn Signal; Clearance; Back Up; Tail; License Plate) | All exterior Body lights must meet current SAE standards and be armored (or low-profile design or sufficiently Body-recessed) to provide protection from impact of branches, etc. Rear brake lights include a third light installed over the rear emergency door. | |||
| Mud Flaps (Front and Rear) | Shall be manufacturers standard. Labeling and advertising is prohibited, other than for necessary safety information | |||
| Exterior Mirrors | Driver's side and curbside exterior mirrors shall be heated and remote controlled. Each mirror head shall be constructed of high impact ABS and include a flat and convex feature. | Manufacturer: | Ford | |
| Model #: | 545 | |||
| Interior Mirror | OEM rear view mirror shall be provided | |||
| Floor Assembly | An Abilitrax floor system or Compatible Equivalent shall be installed to include a series of longitudinal, parallel floor mounted steel tracks. The system shall be capable of accepting "L" style wheelchair tiedown systems and passenger seat bases throughout the floor. The floor base shall be constructed of a water resistant composite material, and the floor tracks of A1011 HSLA 50 (High Strength Low Alloy) materials. The floor system shall incorporate heating ducts and heat registers. It shall also include a cavity that allows the wheelchair lift power and interlock signal wires to be routed through the floor, allowing the lift to be changed from a rear entry to a side entry application without drilling holes through the floor system. | |||
| Floor Covering Material | Shall be a durable nonskid transit type flooring. | |||
| Entrance Step | Shall be a low height (lowest practical) running board, installed on the curb (right) side, continuous full length for entry assist at both the front of the sedan and side sliding doors. | Top of first step above ground [inches]: | 11"-12" | |
| Door Entry Grab Rails (right and left side) | If not OEM supplied, dual entry grab rails shall be installed on each side of the designated entry door, parallel to the steps. Handrails shall be securely fastened. A minimum 1 1/4" diameter, with a high visible yellow stainless steel powder coated material, or non-slip Compatible Equivalent shall be used. | |||
| Twin Rear Doors | OEM twin doors shall be located in the rear of the Transit Bus and when used as an emergency exit door, in compliance with FMVSS 571.217 and title 17 NYCRR Part 720.5 and 720.8 requirements. When the Transit Bus is designed such that the emergency door can be locked and not unlocked when the door latch is operated, then an interlock system must be installed to prevent the propulsion unit from starting, or after the Transit Bus is started, then an audible or visible alarm must be activated. If an interior locking device (vandal lock or equivalent) is provided for emergency exit door(s), then appropriate interlocking must be provided as indicated above. Each door shall include a window and a positive fastening device to hold door in the open position (“hold open” feature) when a rear wheelchair lift is installed. A reflective device for each door shall occupy at least fourteen (14) square inches and provide maximum visibility when the doors are open. | |||
| Padded Panels | Shall be provided, attached to a vertical and horizontal stanchions where appropriate. The gap between the floor and bottom of the panel shall be 5" (plus or minus .5") | |||
| Insulation | OEM supplied in walls and ceiling. | |||
| Wheelchair Lift Door | Wheelchair area opening height shall be a minimum of 56". All items, including lighting, shall be in compliance with ADA and FMVSS 403 & 404. | Opening Height [inches]: | 68" Rear Door, 56" Side Door | |
| Wheelchair Lift | The wheelchair lift shall be automatic electric/hydraulic type (power-up, gravity down) using dual hydraulic cylinders. The hydraulic reservoir capacity shall be at least one (1) quart, with easy access for inspection and servicing. The maximum power draw shall not exceed 70 amps at 12 volts. Wheelchair lift unit shall be a Public Use Lift and shall be installed in accordance with manufacturer’s standards. The lift must have a fail safe system that allows stowing if any solenoid seizes. A manual method to raise and stow the lift shall be provided in the event of a power failure. | Manufacturer: | Braun | |
| Model #: | NCL 1000 |
| Wheelchair Lift | Side or rear mounted, the lift shall be capable of a minimum of 2500 cycle operation with a minimum of 1000 lb. lift capacity. | ||
| Wheelchair Lift | Platform size shall be minimum 34" x 51" (of useable space) and lift capacity shall be minimum 1,000 lb. Wheelchair lift platform shall be constructed of expanded metal grating with left and right side 2 1/2" high safety stops plus a spring loaded or power activated ADA front stop. A pendent type operating control with a cable length sufficient to allow operation of lift at outermost platform position shall be provided. Lift platform shall be automatic power fold/unfold design. | Platform Size [inches]: | 34" x 51" |
| Wheelchair Lift | A transmission interlock system that utilizes intermittent fault filter technology shall be installed to prevent operation of the lift unless door(s) are opened and transmission is in park with parking brake applied. A manual override system in case of power failure shall also be provided. Lift electric system shall be protected with fuse or circuit breaker. | Manufacturer: | Intermotive |
| Model #: | ILISC515-AD |
| Wheelchair Lift | The spring load, deck end, stop shall be retracted while the lift deck is in the load/unload (down) position. This shall enable the operator to load the lift without holding the stop in its retracted position. | ||
| Wheelchair Lift | Two (2) folding handrails on lift platform shall be provided. Handrails shall not reduce platform size. | ||
| Wheelchair Lift | Labeled dash mounted visual alarm (in compliance with Chapter VI, Article III, Parts 720/721, NYCRR) to indicate special service door is not fully closed, shall be provided. | ||
| Wheelchair Lift Barrier | Protective panel shall be provided as needed to prevent shearing action between the lift platform and Transit Bus floor or door jams in conformance with Title 17 NYCRR Part 720.8(a)(3)(b). | ||
| ADA Compliance | All features required for a demand-response application shall be included in accordance with 49 CFR Subtitle A Subpart B (excluding paragraphs 38.33 Fare box, 38.35 Public information system, 38.37 Stop request, and 38.39 Destination and route signs). | ||
| Lighting- Driver Dome Light | OEM supplied | ||
| Lighting (Interior) | Overhead, entrance, step well, and lift lights shall provide no less than two (2) foot-candles of illumination on the entrance step tread, or lift or ramp platform with the door open. Outside light(s) shall provide at least one (1) foot-candle of illumination on the street surface with three (3) feet of step tread outer edge. This system shall provide illumination automatically when the door is open and meet ADA requirements. | ||
| Lighting (Interior) | Overhead entrance and step well lights shall be wired to and be automatically activated by a door controlled switch. Lights shall operate any time the ignition key is on and the door is opened. | ||
| Lighting (Interior) | Interior lighting shall provide a minimum of two (2) foot-candles of illumination at reading level. Interior lighting fixtures shall be reasonably flush with the interior walls and ceiling so no hazard exists for passengers. All interior lights shall be grounded by an in-harness ground attached in the fuse panel to a common grounding point. | ||
| Interior Trim and Padding | All interior panel joints shall be covered with matching trim strips or moldings and all sharp edges, protrusions, corners etc. shall be finished in such a manner to prevent possible injury. (If vacuum lamination is used, joints shall be securely bonded and provide a finished appearance). Any exposed wheelchair lift support brackets, air conditioner units or other similar items shall be padded to prevent injury. | ||
| Heater(s) | Sufficient BTU capacity of front and rear under seat heaters shall be provided to attain a 50°F temperature rise from a mean ambient winter temperature of 21°F. Interior temperature shall be uniform throughout passenger compartment area by the use of heat registers in the floor structure. | Manufacturer: | Ford |
| Model #: | STD Factory |
Air Conditioning Air conditioning system that shall be designed with sufficient BTU cooling capacity to provide a balanced cooling system capable of maintaining a 75°F inside temperature vs. an outside temperature 95°F and a relative humidity of 50%, with ability to continuously decrease temperature inside the Transit Bus (as measured from the approximate Transit Bus center) a minimum of 1°F for every ninety (90) seconds. (Air Conditioner Manufacturer’s Certification that performance requirement for Transit Bus type can be met must be submitted with bid).
| Air Conditioning | The cabin evaporator shall include directional and adjustable discharge ports. It shall be floor mounted toward the rear of the Transit Bus. Any sharp edges and/or exposed metal associated with the AC unit must have these edges/surfaces appropriately padded to provide for passenger protection. Aisle height requirements will be measured from a point directly in front of the AC unit. | ||
| Air Conditioning | Each air conditioning system shall use R134A refrigerant. All system components subject to corrosion from moisture shall be aluminum, copper, stainless steel, galvanized, or epoxy coated. All exterior exposed air conditioning electrical connections must utilize weather pac plugs or Compatible Equivalent. An air intake screen shall be installed on the skirt of the Transit Bus to ensure sufficient airflow through the skirt mounted condenser coil. All hoses shall be supported at a maximum of twenty-four (24) inch intervals by clamps. | ||
| Driver Seat | Driver's seat shall be high back; fully adjustable (vertically and horizontally with electric or air power seat pedestal); include lumbar support; suspension seating (minimally spring suspension); foam padded; fabric upholstered; w/retractable 3-point lap/shoulder seat belt (in compliance with FMVSS 209 & 210). Seat color shall complement interior seating color. | Manufacturer: | Ford |
| Model #: | 21 |
| Front Passenger Seat | Co-pilot (front passenger) seat shall be OEM supplied, matching driver seat (except vertical adjustment). | ||
| Seating | Upholstered transit type seats for a minimum of six (6) adult passengers. See specifications below and floor plan attached (Figures). | ||
| Seating | Seat assemblies and components of identical seats shall be mechanically interchangeable. | ||
| Seating | Seats aft of driver shall be mid-high back, adult passenger seats shall be supplied in individual passenger modules, Freedman model "GO Seat ES Space Saver", or other Compatible Equivalent. All ambulatory seats shall be forward facing. Seat cushions per passenger shall be a minimum of 17” in width and 17” in depth, and seat back shall be a minimum of 24” in height, excluding the grab handle. All cushions and seat back covers shall have easily removable covers, replaceable without removing the seat from the Transit Bus. All seat cushions shall have identical upholstery and a spring suspension system. Seats shall have a swing-up armrest securely attached to the aisle end of each seat. | Manufacturer: | Freedman / AbiliTrax |
| Model # (foldaway): | 43705 | ||
| Model # (single seat): | Freedman 71723 | ||
| Seating | Seats aft of driver shall be two (2) two-passenger foldaway seats plus one (1) single passenger forward facing seat. Seat frames shall mount in track system with quick disconnect hardware. The single seat base shall include a "step and lock" type quick disconnect that features a foot activated seat base release plus wheels that allow for easy repositioning of the seat. Minimum seat widths shall be 17” single and 34” double seats. Aisle width shall be a minimum of 10”. | Single Seat Width [inches]: | 17' |
| Double Seat Width [inches]: | 34" | ||
| Minimum Aisle Width [inches]: | 10" | ||
| Seating | Entire seat frame, except mounting brackets, shall be enclosed in energy absorbing materials. Seat covers shall be transit grade vinyl, 36 oz. per linear yard (Cameo/Predictions), or Compatible Equivalent, or transit grade fabric produced from Marquesa Lana Yarns-Interweave, or Bus Textil Level 3, or Compatible Equivalent. All cover materials must meet FMVSS 302 flammability requirements. Seat foam must meet ASTM D-3675 Radiant Flammability Test. |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .