36C25623R0031 015816 - Temporary Inside Signage 1 Edited - S02.docx
DOCX document 18 KB Posted
- Solicitation number
- 629-22-133
View the file
Other files
Show all 32
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
07-01-15
SECTION 01 58 16
TEMPORARY INTERIOR SIGNAGE
PART 1 GENERAL
DESCRIPTION
This section specifies temporary interior signs.
PART 2 PRODUCTS
2.1 TEMPORARY SIGNS
| A. | Fabricate from 50 Kg (110 pound) mat finish white paper. |
| B. | Cut to 100 mm (4-inch) wide by 300 mm (12 inch) long size tag. |
| C. | Punch 3 mm (1/8-inch) diameter hole centered on 100 mm (4-inch) dimension of tag. Edge of Hole spaced approximately 13 mm (1/2-inch) from one end on tag. |
| D. | Reinforce hole on both sides with gummed cloth washer or other suitable material capable of preventing tie pulling through paper edge. |
| E. | Ties: Steel wire 0.3 mm (0.0120-inch) thick, attach to tag with twist tie, leaving 150 mm (6-inch) long free ends. |
PART 3 EXECUTION
3.1 INSTALLATION
| A. | Install temporary signs attached to room door frame or room door knob, lever, or pull for doors on corridor openings. |
| B. | Mark on signs with felt tip marker having approximately 3 mm (1/8-inch) wide stroke for clearly legible numbers or letters. |
| C. | Identify room with numbers as designated on floor plans. |
3.2 LOCATION
| A. | Install on doors that have room, corridor, and space numbers shown. |
| B. | Doors that do not require signs are as follows: |
| 1. | Corridor barrier doors (cross-corridor) in corridor with same number. |
| 2. | Folding doors or partitions. |
| 3. | Toilet or bathroom doors within and between rooms. |
| 4. | Communicating doors in partitions between rooms with corridor entrance doors. |
| 5. | Closet doors within rooms. |
| C. | Replace missing, damaged, or illegible signs. |
- - - E N D - - - 01 58 16 - 1
File details come from the government source that posted it. Updated .