23 50 11-5.1 Deaerator approved.pdf
PDF 1 MB Posted
- Attached to
- Z1NB--BCVAMC Water Treatment
- Solicitation number
- 36C25022Q0023
View the file
Other files
Show all 20
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LETTER OF TRANSMITTAL
Date: 6/23/2011To: DeMaria Building Company
Project: Battle Creek VA Hospital Boiler Plant Replac
Job No: 209-0191
We are forwarding to you the following:
P.O. Box 8018
Novi, MI 48376
Phone (248) 348-8710 Fax: (248) 348-6251
45500 Grand River
235011 Re-Revised DeaereatorRe:
Description Dwg.
No.Name Status
No.
Prints
Attn: Eric Winquist www.johnegreen.com
1125 N. Cedar Street Mason
MI 48854
517-244-4000 FAX 517-244-4004John E.Green Company
Mechanical Contractor
235011-Boiler Feed Pumps, Deaerators-DA-1, -2Thermaflo Engineering Resubmitted For Approval
Notes: Rob - COMPLETE REVISED SUBMITTAL.
No. of corrected prints to be returned is 1
No. of copies to be submitted for distribution is 1
Detroit, MI Saginaw, MI Ann Arbor, MI Lansing, MI Nashville, TN Petoskey, MI
An equal opportunity employer
Copy:
Brenda Strenzel; John E. Green Company
File
Field
P.O. Box 473639 Charlotte, NC 28247 12249 Nations Ford Road Pineville, North Carolina 28134
Phone 704.940.1228 Fax 704.940.1227 www.thermafloengineering.com
June 15, 2011
To: Mr. Don Maahs W.R. Bradley LLC 5931 Ford Court Brighton, MI 48116
Reference: V.A. Battle Creek Feedwater Deaerator Shop Drawings Response
Dear Don, Attached you will find the revised deaerator drawing that incorporates the engineer’s comments per Transmittal No. 23-50-11- 5 dated 4-26-2011. We received these on 6-10-2011.
We are responding per line number as follows:
1. We have installed two safety relief valves on the deaerator. The capacity was calculated on the amount of steam required to deaerate on 100% makeup as follows:
80,000 lbs/hr Max Llow of Deaerator Max DA Makeup Flow: 160 GPM
Inlet Water Temperature: 55°F Deaerator Water Temperature: 230°F
160 GPM x ΔT 230-55 (175 °F)
80 x 175°F = $14,000
Safety Valve Sizing based on 15 psig set point as request split between two valves, each valve having a capacity of 9795 lbs/hr for a total capacity of 19,590 lbs/hr Valve Model: 4” P 6” Kunkle 6252 set@ 15 psig We have shown these on the drawing.
2. No Sparge Tube is required.
3. Deaerator pressure is 7 psig and performance has been added to the drawing.
4. Recirculation connection size 2” has been added to the left side head and schedule.
5. The height of the deaerator has not changed from the first submission. It is the contractors responsibility to coordinate install or advise.
6. Storage tank is 50 psig @ 400°F.
7. Pegging steam flow calculated @ 14,000 lbs/hr @ 7 psig. 100% makeup SS °F.
8. The controls contractor furnishes the level controls. TFE is furnishing the level switches only.
9. Tulsa Check Valve meets spec with stainless internals.
10. Thermometers will be resubmitted with Red Reading. Mercury is not available and is illegal to ship.
Regards, Bob James President
10-006 W.R. Bradley Battle Creek Project
Item 1
Thermaflo Engineering Inc. Jet Spray Tray Deaerator sized to heat 80,000 lbs/hr of 227°F Feed Water- Rev. 3
Item 2
Thermaflo Engineering Inc. Feedwater Storage Tank, 66” Dia. X 144” OAL, 2000 Gallons of Storage Capacity-Rev.3
Item 3
Kunkle 4 x 6 6252 with P orifice set at 15 PSI
Kunkle Safety and Relief Products
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 113
Pressure and Temperature Limits Model 6252:
10 to 250 psig [0.7 to 17.2 barg] -20° to 406°F [-28° to 208°C]
Applications
• Steam Boilers and Generators.
• Pressure Reducing Stations.
• Air/Gas Compressors - reciprocating or rotary.
• Pressure Vessels - including tanks, receivers, intercoolers, oil/gas separators, lines.
Features and Benefits
• Heavy duty construction of high quality cast iron with SS semi-nozzle trim and disc.
• Bolted bonnet design for easy mainte-nance.
• Seats lapped to optical flatness.
• Dual control rings offer easy adjustabili-ty for precision opening with minimum preopen or simmer and exact blowdown control.
• Heavy duty lift lever assembly.
• Every valve tested/inspected for pres-sure setting, blowdown and leakage.
• All adjustments are factory sealed to prevent tampering or disassembly.
Model Descriptions Model 6252: Cast iron, enclosed spring, SS trim.
Model 6254: Same as Model 6252 except certified for ASME Code Section IV - Low pressure steam heating boilers. Set 15 psig [1.0 barg] only. J through P orifice only.
Model 6252 ASME Section I Steam and ASME Section VIII, Air, Steam and Gas ‘UV’ National Board Certified. Model 6254 ASME Section IV ‘HV’, National Board Certified.
Model 6252
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 114
Models 6252, 6254
Parts and Materials - Model 6252, 6254
No. Part Name Material
1 Body Cast Iron, A126 CL A or B
2 Semi Nozzle SS, SA351 CF8M
3 Warn Ring Locking Screw Brass, B16 H02
4 Warn Ring Locking Pin SS, A582 TY 416
5 Guide Bronze, B584 C84400
6 Guide Locking Screw Brass, B16 H02
7 Guide Locking Pin SS, A582 TY 416
8 Stem End SS, A582 TY 416
9 Spring Step Brass, B16 H02
10 Compression Screw Brass, B16 H02
11 Lever Iron, A536 65 45 12
12 Compression Screw Lock Nut SS, SA479 316 SS
13 Lifting Disc Nut Steel, A108 1018
14 Cap Iron, A536 65 45 12
15 Lifting Disc SS, SA479 316 SS
16 Lever Pin Steel, A108 1018
17 Lever Pin Washer Steel, A108 1018
18 Lever Cotter Pin Steel, A108 1018
19 Stem SS, A582 TY 416
20 Cap Set Screw Steel, A108 1018
21 Bonnet Cast Iron, A126 CL A or B
22 Spring Steel, A229, Aluminum Coated2
23 Bonnet Bolt Steel, A108 1018
24 Disc SS, SA479 316 SS
25 Warn Ring Bronze, B584-C844003
26 Gag Screw Steel, A108 10181
27 Wire Steal Lead Seal, Aluminum Wire1
Notes
1. Not shown on assembly.
2. SS A313-631 for ‘J’ orifice.
3. Brass B16-H02 for ‘J’ orifice.
Models 6252, 6254
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 115
Models 6252, 6254
Specifications
Model1 Orifice Connections —————— Valve Dimensions —–———— Approximate ANSI Standard, in [mm] in [mm] Weight Inlet2 Outlet3 A B C lb [kg]
625*AJG J 11/2 [38.1] FPT 21/2 [63.5] FPT 41/4 [108.0] 31/2 [88.9] 18 [457.2] 34 [15.5]
625*FJG J 11/2 [38.1] F 21/2 [63.5] FPT 41/4 [108.0] 31/2 [88.9] 18 [457.2] 37 [16.8]
625*FJH J 2 [50.8] F 21/2 [63.5] FPT 41/4 [108.0] 31/2 [88.9] 18 [457.2] 39 [17.7]
625*FJJ J 21/2 [63.5] F 21/2 [63.5] FPT 41/4 [108.0] 31/2 [88.9] 18 [457.2] 39 [18.6]
625*AKH K 2 [50.8] FPT 3 [76.2] FPT 45/8 [117.6] 4 [101.6] 181/4 [463.6] 41 [21.4]
625*FKH K 2 [50.8] F 3 [76.2] FPT 45/8 [117.6] 4 [101.6] 181/4 [463.6] 47 [21.4]
625*FKJ K 21/2 [63.5] F 3 [76.2] FPT 45/8 [117.6] 4 [101.6] 181/4 [463.6] 47 [24.1]
625*FKK K 3 [76.2] F 3 [76.2] FPT 45/8 [117.6] 4 [101.6] 181/4 [463.6] 53 [26.3]
625*FKM K 3 [76.2] F 3 [76.2] FPT 45/8 [117.6] 4 [101.6] 181/4 [463.6] 62 [28.2]
625*ALJ L 21/2 [63.5] FPT 4 [101.6] FPT 51/2 [139.7] 413/16 [122.2] 211/2 [546.1] 70 [31.8]
625*FLJ L 21/2 [63.5] F 4 [101.6] FPT 51/2 [139.7] 413/16 [122.2] 211/2 [546.1] 76 [34.5]
625*FLK L 3 [76.2] F 4 [101.6] FPT 51/2 [139.7] 413/16 [122.2] 211/2 [546.1] 84 [38.2]
625*FLM L 4 [101.6] F 4 [101.6] FPT 51/2 [139.7] 413/16 [122.2] 211/2 [546.1] 91 [41.4]
625*AMK M 3 [76.2] FPT 4 [101.6] FPT 55/8 [142.7] 51/8 [130.0] 2111/16 [550.9] 84 [38.2]
625*FMK M 3 [76.2] F 4 [101.6] FPT 55/8 [142.7] 51/8 [130.0] 2111/16 [550.9] 95 [43.2]
625*FMM M 4 [101.6] F 4 [101.6] FPT 55/8 [142.7] 51/8 [130.0] 2111/16 [550.9] 103 [46.8]
625*KNM N 4 [101.6] F 6 [152.4] F 63/4 [171.5] 71/4 [184.2] 221/2 [571.5] 179 [81.4]
625*KPM P 4 [101.6] F 6 [152.4] F 63/4 [171.5] 71/4 [184.2] 2513/16 [655.6] 188 [85.4]
625*KQP Q 6 [152.4] F 8 [203.2] F 91/4 [234.9] 10 [254.0] 391/8 [993.8] 484 [220.0]
625*KRP R 6 [152.4] F 8 [203.2] F 91/4 [234.9] 10 [254.0] 391/8 [993.8] 498 [226.3]
Notes
1. Replace asterisk with desired model number.
2. Inlet Flanges are ANSI B16. 1-250#.
3. Outlet Flanges are ANSI B16. 1-125#.
C
A
B
Models 6252, 6253, 6254
K Salmon Highlight
K Salmon Highlight
K Salmon Highlight
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 116
Model 6252
Non-code1 and ASME Section VIII Air, (English, SCFM)
Set Pressure ——————————–––—––———— Orifice, Area in2 ————————––————————— (psig) J K L M N P Q R
(1.414) (2.022) (3.138) (3.960) (4.774) (7.018) (12.155) (17.600)
10 582 833 1292 1631 1966 3129 5005 7247
15 744 1064 1652 2084 2513 3694 6397 9263
20 858 1227 1904 2403 2897 4258 7375 10679
25 972 1390 2157 2722 3281 4823 8354 12096
30 1086 1552 2409 3040 3665 5388 9332 13512
35 1211 1731 2687 3391 4088 6009 10408 15070
40 1336 1910 2965 3741 4510 6630 11484 16628
45 1461 2089 3242 4092 4933 7252 12560 18186
50 1586 2268 3520 4442 5356 7873 13636 19744
55 1711 2447 3798 4793 5778 8494 14712 21302
60 1837 2626 4076 5143 6201 9115 15788 22860
65 1962 2805 4354 5494 6623 9737 16864 24418
70 2087 2984 4631 5845 7046 10358 17939 25976
75 2212 3163 4909 6195 7469 10979 19015 27534
80 2337 3342 5187 6546 7891 11600 20091 29092
90 2588 3700 5742 7247 8736 12843 22243 32208
100 2838 4058 6298 7948 9582 14085 24395 35324
110 3088 4416 6854 8649 10427 15328 26547 38440
120 3339 4774 7409 9350 11272 16570 28699 41555
130 3589 5132 7965 10051 12117 17813 30851 44671
140 3839 5490 8520 10752 12962 19055 33003 47787
150 4090 5848 9076 11453 13808 20298 35155 50903
160 4340 6206 9631 12154 14653 21540 37307 54019
170 4590 6564 10187 12855 15498 22783 39459 57135
180 4841 6922 10743 13557 16343 24025 41611 60251
190 5091 7280 11298 14258 17188 25268 43763 63367
200 5341 7638 11854 14959 18034 26510 45915 66483
210 5592 7996 12409 15660 18879 27753 48067 69599
220 5842 8354 12965 16361 19724 28995 50219 72715
230 6092 8712 13520 17062 20569 30238 52371 75831
240 6343 9070 14076 17763 21414 31480 54523 78947
250 6593 9428 14631 18464 22260 32723 56675 82063
Note
1. No code stamp or ‘NB’ on nameplate below 15 psig set.
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 117
Model 6252
Non-code1 and ASME Section VIII Air, [Metric, Nm3/h]
Set Pressure ——————————–––—––———— Orifice, Area cm2 ————————––————————— [barg] J K L M N P Q R
[9.135] [13.045] [20.245] [25.548] [30.581] [45.277] [78.419] [113.548]
1.0 1148 1639 2543 3210 3842 5688 9852 14265
1.5 1445 2063 3201 4040 4836 7160 12400 17955
2.0 1710 2442 3790 4783 5725 8476 14680 21256
2.5 1999 2854 4429 5590 6691 9906 17157 24842
3.0 2291 3271 5077 6407 7668 11354 19664 28473
3.5 2583 3688 5724 7224 8646 12802 22172 32104
4.0 2875 4106 6371 8040 9624 14250 24680 35735
4.5 3167 4523 7019 8857 10602 15697 27187 39366
5.0 3459 4940 7666 9674 11580 17145 29695 42997
5.5 3751 5357 8314 10491 12558 18593 32203 46628
6.0 4044 5774 8961 11308 13536 20041 34710 50259
6.5 4336 6191 9608 12125 14514 21489 37218 53890
7.0 4628 6608 10256 12942 15492 22937 39726 57521
7.5 4920 7026 10903 13759 16469 24384 42233 61152
8.0 5212 7443 11551 14576 17447 25832 44741 64783
8.5 5504 7860 12198 15393 18425 27280 47249 68414
9.0 5796 8277 12845 16210 19403 28728 49756 72045
9.5 6088 8694 13493 17027 20381 30176 52264 75676
10.0 6381 9111 14140 17844 21359 31624 54772 79307
10.5 6673 9528 14787 18661 22337 33072 57279 82938
11.0 6965 9946 15435 19478 23315 34519 59787 86569
11.5 7257 10363 16082 20295 24293 35967 62294 90200
12.0 7549 10780 16730 21112 25270 37415 64802 93831
12.5 7841 11197 17377 21929 26248 38863 67310 97462
13.0 8133 11614 18024 22746 27226 40311 69817 101093
13.5 8426 12031 18672 23563 28204 41759 72325 104724
14.0 8718 12449 19319 24380 29182 43207 74833 108355
14.5 9010 12866 19967 25197 30160 44654 77340 111986
15.0 9302 13283 20614 26014 31138 46102 79848 115617
15.5 9594 13700 21261 26831 32116 47550 82356 119248
16.0 9886 14117 21909 27648 33094 48998 84863 122879
17.2 10587 15118 23462 29608 35440 52473 90882 131593
Note
1. No code stamp or ‘NB’ on nameplate below
1.1 barg set.
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 118
Model 6252
Non-code1 and ASME Section VIII Steam, (English, lb/h)
Set Pressure ————————————––—––—— Orifice, Area in2 ————––————————————— (psig) J K L M N P Q R
(1.414) (2.022) (3.138) (3.960) (4.774) (7.018) (12.155) (17.600)
10 1775 2538 3938 4970 5991 8807 15254 22087
15 2091 2990 4640 5855 7059 10377 17972 26023
20 2410 3447 5349 6751 8138 11963 20720 30002
25 2730 3904 6059 7646 9217 13550 23468 33981
30 3050 4361 6768 8541 10297 15137 26217 37961
35 3401 4864 7549 9526 11484 16882 29239 42338
40 3753 5367 8329 10511 12671 18627 32262 46715
45 4105 5870 9109 11496 13859 20373 35285 51092
50 4456 6373 9890 12480 15046 22118 38308 55469
55 4808 6875 10670 13465 16233 23863 41331 59846
60 5160 7378 11451 14450 17420 25609 44354 64223
65 5511 7881 12231 15435 18608 27354 47377 68600
70 5863 8384 13011 16420 19795 29099 50399 72977
75 6215 8887 13792 17405 20982 30845 53422 77354
80 6566 9390 14572 18389 22169 32590 56445 81731
90 7270 10395 16133 20359 24544 36081 62491 90485
100 7973 11401 17694 22329 26918 39571 68537 99239
110 8676 12407 19255 24298 29293 43062 74582 107993
120 9380 13413 20815 26268 31668 46553 80628 116747
130 10083 14418 22376 28238 34042 50043 86674 125501
140 10786 15424 23937 30207 36417 53534 92720 134255
150 11489 16430 25498 32177 38791 57025 98765 143009
160 12193 17435 27059 34147 41166 60515 104811 151763
170 12896 18441 28619 36116 43540 64006 110857 160517
180 13599 19447 30180 38086 45915 67497 116903 169271
190 14303 20453 31741 40056 48289 70987 122948 178025
200 15006 21458 33302 42025 50664 74478 128994 186779
210 15709 22464 34863 43995 53038 77969 135040 195533
220 16413 23470 36423 45965 55413 81459 141086 204287
230 17116 24475 37984 47934 57787 84950 147131 213041
240 17819 25481 39545 49904 60162 88441 153177 221795
250 18523 26487 41106 51873 62536 91931 159223 230549
Note
1. No code stamp or ‘NB’ on nameplate below 15 psig set.
K Salmon Highlight
K Salmon Highlight
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 119
Model 6252
Non-code1 and ASME Section VIII Steam, [Metric, kg/h]
Set Pressure ————————————––—––—— Orifice, Area cm2 ————––————————————— [barg] J K L M N P Q R
[9.135] [13.045] [20.245] [25.548] [30.581] [45.277] [78.419] [113.548]
1.0 945 1350 2095 2644 3164 4685 8115 11750
1.5 1145 1635 2538 3203 3834 5676 9831 14235
2.0 1356 1936 3005 3792 4539 6720 11638 16852
2.5 1585 2263 3512 4431 5304 7854 13602 19696
3.0 1816 2593 4025 5079 6080 9001 15590 22574
3.5 2048 2924 4538 5727 6855 10149 17578 25453
4.0 2279 3255 5051 6375 7630 11297 19567 28332
4.5 2511 3586 5565 7022 8406 12445 21555 31210
5.0 2743 3916 6078 7670 9181 13593 23543 34089
5.5 2974 4247 6591 8318 9956 14741 25531 36968
6.0 3206 4578 7104 8965 10731 15889 27519 39846
6.5 3437 4909 7618 9613 11507 17037 29507 42725
7.0 3669 5239 8131 10261 12282 18185 31495 45604
7.5 3901 5570 8644 10909 13057 19332 33483 48483
8.0 4132 5901 9157 11556 13833 20480 35471 51361
8.5 4364 6231 9671 12204 14608 21628 37459 54240
9.0 4595 6562 10184 12852 15383 22776 39448 57119
9.5 4827 6893 10697 13499 16158 23924 41436 59997
10.0 5059 7224 11211 14147 16934 25072 43424 62876
10.5 5290 7554 11724 14795 17709 26220 45412 65755
11.0 5522 7885 12237 15443 18484 27368 47400 68633
11.5 5753 8216 12750 16090 19260 28515 49388 71512
12.0 5985 8546 13264 16738 20035 29663 51376 74391
12.5 6217 8877 13777 17386 20810 30811 53364 77270
13.0 6448 9208 14290 18033 21585 31959 55352 80148
13.5 6680 9539 14803 18681 22361 33107 57341 83027
14.0 6912 9869 15317 19329 23136 34255 59329 85906
14.5 7143 10200 15830 19976 23911 35403 61317 88784
15.0 7375 10531 16343 20624 24687 36551 63305 91663
15.5 7606 10862 16856 21272 25462 37699 65293 94542
16.0 7838 11192 17370 21920 26237 38846 67281 97420
17.2 8394 11986 18601 23474 28098 41601 72052 104329
Note
1. No code stamp or ‘NB’ on nameplate below 1.1 barg set.
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 120
Model 6252
Non-code and ASME Section I Steam, (English, lb/h)
Set Pressure ——————————–—––———–—— Orifice, Area in2 ——————––——–———————— (psig) J K L M N P Q R
(1.414) (2.022) (3.138) (3.960) (4.774) (7.018) (12.155) (17.600)
15 2025 2895 4494 5671 6836 10050 17406 25203
20 2344 3352 5202 6565 7915 11635 20151 29178
25 2664 3809 5911 7460 8993 13220 22897 33153
30 2983 4266 6620 8354 10071 14805 25642 37129
35 3302 4722 7329 9248 11149 16390 28387 41104
40 3622 5179 8037 10143 12228 17975 31133 45079
45 3941 5636 8746 11037 13306 19560 33878 49054
50 4260 6092 9455 11932 14384 21146 36624 53030
55 4580 6549 10164 12826 15463 22731 39369 57005
60 4899 7006 10872 13721 16541 24316 42114 60980
65 5219 7462 11581 14615 17619 25901 44860 64955
70 5544 7928 12304 15527 18719 27518 47660 69010
75 5873 8399 13034 16449 19830 29150 50488 73150
80 6202 8869 13764 17370 20940 30783 53316 77199
90 6860 9810 15224 19212 23161 34048 58971 85388
100 7518 10751 16684 21055 25383 37314 64627 93577
110 8176 11692 18144 22897 27604 40579 70282 101766
120 8834 12632 19604 24740 29825 43845 75938 109955
130 9492 13573 21065 26582 32047 47110 81593 118144
140 10150 14514 22525 28425 34268 50375 87249 126333
150 10808 15455 23985 30267 36489 53641 92904 134522
160 11466 16396 25445 32110 38710 56906 98560 142711
170 12123 17336 26905 33952 40932 60171 104215 150900
180 12781 18277 28365 35795 43153 63437 109871 159089
190 13439 19218 29825 37638 45374 66702 115526 167278
200 14097 20159 31285 39480 47595 69967 121182 175467
210 14755 21100 32745 41323 49817 73233 126837 183656
220 15413 22040 34205 43165 52038 76498 132493 191845
230 16071 22981 35665 45008 54259 79763 138148 200034
240 16729 23922 37125 46850 56480 83029 143804 208223
250 17387 24863 38585 48693 58702 86294 149459 216412
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 121
Model 6252
Non-code and ASME Section I Steam, [Metric, kg/h]
Set Pressure ——————————–—––———–—— Orifice, Area cm2 ——————––——–———————— [barg] J K L M N P Q R
[9.135] [13.045] [20.245] [25.548] [30.581] [45.277] [78.419] [113.548]
1.0 905 1292 2005 2530 3029 4485 7767 11247
1.5 1115 1592 2471 3119 3733 5527 9573 13861
2.0 1326 1893 2938 3707 4437 6570 11378 16476
2.5 1536 2193 3404 4295 5141 7612 13184 19090
3.0 1746 2494 3870 4884 5845 8655 14990 21705
3.5 1957 2794 4336 5472 6550 9697 16795 24319
4.0 2167 3094 4802 6060 7254 10740 18601 26934
4.5 2377 3395 5268 6648 7958 11782 20407 29548
5.0 2593 3702 5746 7251 8679 12850 22256 32226
5.5 2809 4012 6226 7857 9404 13924 24116 34919
6.0 3026 4321 6706 8463 10130 14998 25976 37612
6.5 3243 4631 7186 9069 10855 16072 27836 40305
7.0 3459 4940 7666 9675 11580 17146 29696 42998
7.5 3676 5249 8147 10281 12305 18219 31555 45691
8.0 3893 5559 8627 10886 13031 19293 33415 48384
8.5 4109 5868 9107 11492 13756 20367 35275 51077
9.0 4326 6177 9587 12098 14481 21441 37135 53770
9.5 4543 6487 10067 12704 15206 22515 38995 56463
10.0 4759 6796 10547 13310 15932 23588 40855 59156
10.5 4976 7106 11027 13916 16657 24662 42714 61849
11.0 5193 7415 11508 14522 17382 25736 44574 64542
11.5 5409 7724 11988 15128 18108 26810 46434 67235
12.0 5626 8034 12468 15734 18833 27884 48294 69928
12.5 5843 8343 12948 16340 19558 28957 50154 72621
13.0 6059 8652 13428 16946 20283 30031 52013 75314
13.5 6276 8962 13908 17551 21009 31105 53873 78006
14.0 6493 9271 14388 18157 21734 32179 55733 80699
14.5 6709 9581 14868 18763 22459 33253 57593 83392
15.0 6926 9890 15349 19369 23184 34327 59453 86085
15.5 7143 10199 15829 19975 23910 35400 61312 88778
16.0 7359 10509 16309 20581 24635 36474 63172 91471
17.2 7879 11251 17461 22035 26375 39051 67636 97934
© 1998/rev. 2000 Anderson Greenwood reserves the right to change product designs and specifications without notice. 122
Model Number/Order Guide
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
26 5 2 F L K 0 1 — A S 0 0 2 0
Model Number Position
Example
Model
Connection Model A - Female x Female F - 250# Flange x Female K - 250# Flange x 125# Flange
Orifice J N K P L Q M R
Inlet Size G - 11/2-inch [38.1] K - 3-inch [76.2] H - 2-inch [50.8] M - 4-inch [101.6] J - 21/2-inch [63.5] P - 6-inch [152.4]
Variation (01 through 99) 01 - Plain lever 02 - Plain lever with gag
Design Revision Indicates non-interchangeable revision.
Dash (-) if original design.
Valve Service A - Steam ASME Section I (Model 6252 only) G - Steam ASME Section IV (Model 6254 (15 psig) [1.0 barg] only) K - Air ASME Section VIII (Model 6252 only) L - Steam ASME Section VIII (Model 6252 only) N - Non-code Air/Gas P - Non-code Steam
Spring Material S - Steel (plated)
Set Pressure Model 6252 - 5 psig [0.34 barg] (0005) through 250 psig [17.2 barg] (0250) Model 6254 - 15 psig [1.0 barg] (0015)
Models 6252, 6254
Model 6254
ASME Section IV Steam, (lb/h) [kg/h]
Set Pressure ——————–—— Orifice, Area in2 [cm2] ————––––———— (psig) J K L M N P [barg] 1.414 2.022 3.138 3.960 4.774 7.018
[9.123] [13.045] [20.245] [25.548] [30.800] [45.277]
15 2215 3168 4916 6204 7479 10994 [1.0] [1003] [1435] [2227] [2810] [3388] [4980]
Item 4
McDonnell Miller Series 64 Low Level Switch
B o ile r C o n tr o ls
Boiler Controls McDonnell & Miller
A B C D E F
NPT NPT
915⁄16 (252) 77⁄16 (65) 1 61⁄2 (165) 31⁄8 (79) 1
A B
E
F
D CUT-OFF
LEVEL
C
SERIES 64
Low Water Cut-Offs – Mechanical For Steam and Hot Water Boilers Series 64 Low Water Cut-Offs
• Quick hook-up fittings provided for installation directly into gauge glass tappings
Model 64-A
A B
C
E D
G
F
CUT-OFF
LEVEL
• For residential, commercial, and industrial boiler applications of any steaming capacity
• Heavy Duty
• Adjustable BX outlet for easy installation
• Dual precision switches for dependable operation of the low water cut-off and alarm or electric water feeder
• Packless bellows
• Optional manual reset available
• 1" (25mm) NPT equalizing pipes required
• Maximum boiler pressure 50 psi (3.5 kg/cm2)
• Use with TC-4 on hot water systems
Dimensions, in. (mm)
Ordering Information
Model Part Weight Number Number Description lbs. (kg)
64 143600 Low water cut-off 11.3 (5.1) 64-A 143700 64 w/quick hook-up fittings 18.3 (8.3) 64-B 143800 64 w/float block 11.5 (5.2) 64-M 144250 64 w/manual reset 12.5 (5.7)
Electrical Ratings
Model 64-A Low Water Cut-Offs
Motor Switch Rating (Amperes) Voltage Full Load Locked Rotor Pilot Duty 120 VAC 7.4 44.4 125 VA at 120 240 VAC 3.7 22.2 or 240 VAC
A B C D E F G min. max. NPT NPT
25⁄8 (66) 915⁄16 (252) 41⁄2 (113) 67⁄8 (172) 133⁄8 (339) 31⁄8 (79) 1 1
Dimensions, in. (mm)
04_LWCOpgs 27-41 COLLECT 3/6/07 6:29 PM Page 40
Item 5
McDonnell Miller RS-1-LP-S High Level Overflow Switch
Item 6
McDonnell Miller RS-1-LP-S High Level Switch
Liquid Level Controls McDonnell & Miller
Sensors – Low Pressure
RS-1-LP
AS-5S
O rdering Info r m a t i o n
Model Part Weight Number Number Description lbs. (kg) A S - 5 S 1 7 6 2 3 0 Remote sensor: 4 levels for all tanks .5 (.23) A P - 3 - S S - J 1 7 6 2 3 1 39" (991mm) SS Ambient Probe Rod 1.0 (.5)
O rdering Info r m a t i o n
Model Part Weight Number Number Description lbs. (kg) R S - 1 - L P 1 7 6 2 0 3 Remote Sensor 3.0 (1.4) R S - 1 - L P - S 1 7 6 2 1 8 Remote Sensor w/short probe 3.0 (1.4)
Ambient Pressure Remote Sensor
A S - 5 S
• One to five probes available for multiple functions. For use on tanks and vessels vented and at atmospheric pressure only. Up to 3 probe rods can be joined for 10 ft. length.
Use separator at each joint.
Series-AS Ambient Remote Sensor:
• NEMA 1 Enclosure
• Maximum Temperature: 120°F (49°C)
• Maximum Pressure: 0 psig
• Maximum Water Temperature:
250°F (121°C) Model RS-1-LP
• Maximum Water Pressure:
160 psi (11.2kg/cm2) Model RS-1-LP
• Maximum Steam Pressure:
15 psig (1.0 kg/cm2)
• Can be installed in horizontal orientation
Dimensions, in. (mm) A B C D E F
2" NPT 35⁄8 (92) 11⁄3 2 ( 2 6 ) 23⁄8 (60) 35⁄3 2 (80) 35⁄3 2 (80)
Remote Sensor Model RS-1-LP
Dimensions, in. (mm) A B C D E
NPT
3⁄4 7⁄8 (22) 3 (80) 23⁄4 (70) 33⁄8 (86)
A P - 3 - S S - J
08. Water Feeders 70-76• 3/6/07 1:48 PM Page 74
Water Gauges
Customer Service 1-704-841-6000112
CHAIN LEVER WATER GAUGES
Lever on standard 12-foot chain allows operator to open and close valves that would be beyond reach. Valve stems operate on quarter-turns.
Part Pipe Glass O.D. Wt./100 Number Size (in.) & Length (lbs.)
25-601-00# 1/2 5/8 x 12 335 25-602-00# 3/4 3/4 x 16 350 20-601-00## 1/2 5/8 x 12 370 20-602-00## 3/4 3/4 x 16 435
#Polished Finish Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
##Ball valve not included. Includes 1/4" needle drain.
20-600 & 25-600 SERIES
Part Pipe Glass O.D. Wt./100 Number Size (in.) & Length (lbs.) Wheel Type 24-301-00 1/2 5/8 x 12 425 ALUMINUM 24-302-00 1/2 5/8 x 12 425 COMPOSITION 24-304-00 3/4 3/4 x 16 490 ALUMINUM 24-305-00 3/4 3/4 x 16 490 COMPOSITION
24-350-00** 1/2 5/8 x 12 425 ALUMINUM 24-351-00** 1/2 5/8 x 12 425 COMPOSITION 24-353-00** 3/4 3/4 x 16 490 ALUMINUM 24-354-00** 3/4 3/4 x 16 490 COMPOSITION
Note: Service ratings are subject to pressure/temperature ratings of gauge glass and glass gaskets.
** ASME listed automatic ball check valves
BRONZE LIQUID LEVEL GAUGES
Automatic and non-automatic direct reading gauges in shank pipe sizes 1/2" and 3/4".
Non- Automatic
ASME
Automatic
24-300 & 24-350 SERIES
Water Gauges
& Accessories
FEATURES
• Quick opening, non-automatic
• Service rating: 250 psig @ 400°F, 500 psig @ 100°F (See note!)
• EPDM standard gauge glass gasket
• Standard 1/4" needle drain valve
• Furnished with 12 feet of chain
• H-2485 pull handle is standard
• CRN Registered
FEATURES
• Heavy pattern bronze valve body
• Guard rod bracket to accommodate four guard rods
• PTFE reinforced gauge glass gasket and stem packing are standard
• Rated 250 psig @ 400°F, 500 psig @ 100°F (See note!)
• Automatic - conforms to ASME power boiler code requirements for automatic water gauges; ball checks in upper and lower arms
• High pressure gauge glass and gaskets are standard
• CRN Registered
• Bronze ball valve drains are standard
Karin Salmon Underline
Item 7
Conbraco 24-350 ASME Sight Glass Assembly with Red Line Glass
Item 10
Thermaflo 2” Vaccum Breaker
CHECK
CLASS 125 BRONZE
Screw Cap • Integral Seat • PTFE Disc
Y-Pattern Swing Type
BIV-24 10750 CORPORATE DRIVE • STAFFORD, TEXAS
B R
O N
Z E
C H
E C
K
NO. NAME OF PART SPECIFICATION
1 BODY CAST BRONZE (ASTM B62)
2 CAP FORGED BRASS (B283, C37700)
4 DISC PTFE
12 DISC HOLDER CAST BRONZE (B62)
13 DISC NUT (1/2 ~ 1) BRASS ROD (B16)
(11/4 ~ 2) FORGED BRASS (B283, C37700)
17 HINGE PIN COPPER
18 PLUG BRASS ROD (B16)
MATERIAL LIST
END TO END KITZ
THREADED ENDS ANSI B1.20.1
SOLDER JOINT ENDS ANSI B16.18
DESIGN MSS SP-80, TYPE 4
MILITARY MSS SP-80, TYPE 4
CODE # 22T (AKYRT)
THREADED
d2 H L L1 d1 APPROX. CARTON SIZE Max. Min NET WT. QTY
1/2 1.57 2.20 1.64 .631 .627 0.53 96 3/4 1.93 2.76 1.88 .881 .877 0.89 60 1 2.28 3.15 2.31 1.132 1.128 1.30 48
11/4 2.80 3.74 2.83 1.382 1.378 1.87 24 11/2 3.15 4.33 3.21 1.633 1.628 2.70 18 2 3.74 5.04 4.02 2.133 2.128 4.14 12
DIMENSIONS - WEIGHTS - QUANTITIES
STANDARDS
125 PSI - SATURATED STEAM TO 353ºF
- FLUID TO 406º
200 PSI NON-SHOCK COLD WATER, OIL OR GAS
PRESSURE/TEMPERATURE
CODE # 23T (CYRT)
SOLDER*
*SEE PRESSURE/TEMPERATURE LIMITATIONS FOR SOLDER JOINT
VALVES - PAGE BIV-50.
Item 11
Weiss 4.5” Dial Pressure Gauge w/ Syphon & Isolation Valve Reange: 30”-0-30 PSIG
Process pressure gauge
PROCESS PRESSURE GAUGES
The 41/2" Process Gauge is designed for those severe service applications where operator safety is a factor. This solid front gauge is equipped with a solid wall separating the indicating dial from the bourdon tube and a blow-out back which will release from the case if the bourdon tube should rupture.
Available with phosphor bronze/brass, 316 stainless steel or monel internals, liquid-filled or dry construction, this gauge is ideally suited for the require-ments of the Process, Power and Chemical Industries. This high quality gauge offers the benefit of field filling without any additional kits or accessories.
NF4UGY1 NON-FILLED / LF4UGY1 LIQUID FILLED
SOCKET: Brass BOURDON TUBE: Phosphor bronze - C tube to 600 psi.
AISI 316 stainless steel coiled tube 1000 psi and above.
CONNECTING JOINTS: Silver brazed MOVEMENT: Bushed stainless steel DIAL: White aluminum, black markings POINTER: Black aluminum, micrometer adjustable CASE: Black impact resistant phenolic WINDOW: Acrylic RING: Reinforced polypropylene GASKETS: Ethylene propylene
ACCURACY: 0.5%
CONNECTIONS: 1/4" or 1/2" NPT lower or lower back CAT. NO. LF4UGY1: Lower connection only.
NF4UGY2 NON-FILLED / LF4UGY2 LIQUID FILLED
SOCKET: AISI 316 stainless steel BOURDON TUBE: AISI 316 S.S. - C tube to 600 psi.
Coiled tube 1000 psi and above.
CONNECTING JOINTS: Welded MOVEMENT: Bushed stainless steel DIAL: White aluminum, black markings POINTER: Black aluminum, micrometer adjustable CASE: Black impact resistant phenolic WINDOW: Acrylic RING: Reinforced polypropylene GASKETS: Ethylene propylene CONNECTIONS: 1/4" or 1/2" NPT lower or lower back CAT. NO. LF4UGY2: Lower connection only.
http://www.weissinstruments.com/catalogs/phc/process.htm (1 of 2) [1/27/2009 2:40:28 PM] http://www.weissinstruments.com/index.htm http://www.weissinstruments.com/index.htm http://www.weissinstruments.com/lierature.htm http://www.weissinstruments.com/contact.htm http://www.weissinstruments.com/weisssitemap.htm
Process pressure gauge
PRESSURE
RANGE GRADUATIONS FIG. INTERVAL
0-15 0.1 1 0-30 0.2 5 0-60 0.5 5 0-100 1 10 0-160 1 20 0-200 2 20 0-300 5 50 0-400 5 50 0-600 5 50 0-800 10 100 0-1000 10 100 0-1500 10 200 0-2000 20 200 0-3000 20 500 0-5000 50 500 0-10000 100 1000 0-20000 200 2000
COMPOUND
RANGE GRADUATIONS FIG. INTERVAL
30-0-15 0.5" Hg.-0.2p 5" Hg.-3p 30-0-30 1" Hg.-0.5p 10" Hg.-5p 30-0-60 1" Hg.-1p 10" Hg.-10p 30-0-100 2" Hg.-1p 10" Hg.-10p 30-0-150* 5" Hg.-2p 10" Hg.-20p 30-0-300* 5" Hg.-2p 30" Hg-25p
VACUUM
bar -1-0 kPa -100-0 30"-0
0.01 0.2" In. Hg.
0.1 5" In. Hg.
Bimetal Thermometers | Diaphragm Seals | Gauge Accessories | General Purpose Thermometers | Hand Held Digital Thermometers
Hot Water Bimetal Dial Thermometers | HVAC Pressure Gauges | Industrial Thermometers | Low Pressure Diaphragm Gauges
Process Pressure Gauges | Six Inch Hot Water Thermometers | Six Inch Industrial Thermometers | Stainless Steel Industrial Gauges
Trade Line Pressure Gauges | Trade Line Gauges | | Tri-o-meters | Thrift Line Thermometers Vapor Actuated Dial Thermometers http://www.weissinstruments.com/catalogs/phc/process.htm (2 of 2) [1/27/2009 2:40:28 PM] http://www.weissinstruments.com/catalogs/phc/bimetal.htm http://www.weissinstruments.com/catalogs/phc/diaphragm.htm http://www.weissinstruments.com/catalogs/phc/guageacc.htm http://www.weissinstruments.com/catalogs/phc/sixhot.htm http://www.weissinstruments.com/catalogs/phc/guageacc.htm http://www.weissinstruments.com/catalogs/phc/guageacc.htm http://www.weissinstruments.com/catalogs/phc/sixhot.htm http://www.weissinstruments.com/catalogs/phc/trade.htm http://www.weissinstruments.com/catalogs/phc/industrial.htm http://www.weissinstruments.com/catalogs/phc/lowpressure.htm http://www.weissinstruments.com/catalogs/phc/lowpressure.htm http://www.weissinstruments.com/catalogs/phc/sixhot.htm http://www.weissinstruments.com/catalogs/phc/sixinch.htm http://www.weissinstruments.com/catalogs/phc/stnstlind.htm http://www.weissinstruments.com/catalogs/phc/stnstlind.htm http://www.weissinstruments.com/catalogs/phc/trade.htm http://www.weissinstruments.com/catalogs/phc/trade.htm http://www.weissinstruments.com/catalogs/phc/lowpressure.htm http://www.weissinstruments.com/catalogs/phc/sixinch.htm http://www.weissinstruments.com/catalogs/phc/vapor.htm http://www.weissinstruments.com/catalogs/phc/vapor.htm Dave Barbee
Item 12
Weiss model 9VU6 Vari-Angle Industrial Thermometer Range: 30°F to 300°F with model ER6-75SS Well Stainless Steel
VARI-ANGLE INDUSTRIAL THERMOMETERS
7" SCALE CAT NO. 9" SCALE CAT NO.
31/2" STEM 7VU35 31/2" STEM 9VU35
6" STEM 7VU6 6" STEM 9VU6
9" STEM 7VU9 9" STEM 9VU9
12" STEM 7VU12 12" STEM 9VU12
ADD RANGE CODE FROM RANGE TABLE LISTING. EX: 9VU35-240 (RANGE 30-240F)
ABOVE CATALOG NUMBERS DO NOT INCLUDE SOCKETS - ORDER SEPARATELY
FROM THERMOWELL TABLE LISTING.
VARI-ANGLE AIR DUCT THERMOMETERS
9" SCALE CAT NO.
31/2" STEM 9VD35
6" STEM 9VD6
9" STEM 9VD9
12" STEM 9VD12
ADD RANGE CODE FROM RANGE TABLE LISTING. EX: 9VD6-180 (RANGE 30-180F)
ABOVE CAT. NUMBERS INCLUDE A REVERSIBLE DUCT MOUNTING FLANGE.
INDUSTRIAL GLASS THERMOMETERS
The Weiss 7" and 9" Vari-angle® is molded of GE Valox® polyester, 40% glass/mineral reinforced. This particular material has excellent strength, impact and stiffness properties which makes it perfect for the toughest applications. Some of the uses are process piping, tanks, pipelines in building construction, boilers and air ducts. The Vari-angle is a versatile thermometer that can be adjusted easily for optimum readability. Furnished in ranges up to and including 300°F.
® Vari-angle is a registered trademark of Weiss Instruments, Inc.
SPECIFICATIONS
CASE: Modern V-shape design with parts molded of GE Valox® polyester, in black textured finish. Heavy glass protected front firmly secured against rattles by spring action.
STEM: For 31/2" stems only and ranges up to and including 300°F, the stem material is a precision die cast Zamac alloy. For ranges above 300°F, bulb chamber is a precision machined aluminum alloy with copper plated steel stem extension. For Separable Socket connections only.
LOCKING DEVICE: Adjustable case locknut and angle adjusting screw work independently to provide a full 360° positioning of thermometer case and stem.
ADJUSTABLE JOINT: GE Valox finished to match case. Completely encloses capillary to prevent tampering and foreign matter from enter-ing instrument.
TUBE & CAPILLARY: Blue liquid filled-magnifying lens "Blue Reading" tube. Precision made to guarantee accuracy within 1% of scale range. Silicone shock mounted for lasting durability.
SCALE: White coated aluminum with permanently baked bold black markings. Locked in place and adjusted through device at top of scale. There are no mounting screws to cover up scale markings.
® Valox is a registered trademark of the General Electric Co.
9VD6
ari-angle®
9VU35
ALUMINUM CASE VARI-ANGLE INDUSTRIAL THERMOMETERS
7" SCALE CAT NO. 9" SCALE CAT NO.
31/2" STEM A7VU35 31/2" STEM A9VU35
6" STEM A7VU6 6" STEM A9VU6
9" STEM A7VU9 9" STEM A9VU9
12" STEM A7VU12 12" STEM A9VU12
ADD RANGE CODE FROM RANGE TABLE LISTING. EX: A9VU35-120 (RANGE 0-120F)
ABOVE CATALOG NUMBERS DO NOT INCLUDE SOCKETS - ORDER SEPARATELY
FROM THERMOWELL TABLE LISTING.
CONSTRUCTION FEATURES
CASE: Modern V-shape design, high pressure die cast aluminum, finished in black textured enamel. Heavy glass protected front firmly secured against rattles by spring action.
STEM: For 31/2" stems only and ranges up to and including 300°F, the stem material is a precision die cast Zamac alloy. For ranges above 300°F, bulb chamber is a precision machined aluminum alloy with copper plated steel stem extension. For Separable Socket connections only.
LOCKING DEVICE: Two adjusting screws provide a full 360° positioning of thermometer case and stem.
ADJUSTABLE JOINT: Die cast aluminum finished to match case.
Completely encloses capillary to prevent tampering and foreign matter from entering instrument.
TUBE & CAPILLARY: Blue liquid filled-magnifying lens "Blue Reading" tube. Precision made to guarantee accuracy within 1% of scale range. Silicone shock mounted for lasting durability.
SCALE: White coated aluminum with permanently baked bold black markings. Locked in place and adjusted through device at top of scale. There are no mounting screws to cover up scale markings.
FEDERAL SPEC. Units are in full conformance with Federal Specifica-tion GG-T-321D.
ari-angle®
ALUMINUM DESIGN
A9VU35
STRAIGHT FORM INDUSTRIAL THERMOMETERS
7" SCALE CAT NO. 9" SCALE CAT NO.
31/2" STEM 7SU35 31/2" STEM 9SU35
6" STEM 7SU6 6" STEM 9SU6
9" STEM 7SU9 9" STEM 9SU9
12" STEM 7SU12 12" STEM 9SU12
ADD RANGE CODE FROM RANGE TABLE LISTING. EX: 9SU35-120 (RANGE 0-120F)
ABOVE CATALOG NUMBERS DO NOT INCLUDE SOCKETS - ORDER SEPARATELY
FROM THERMOWELL TABLE LISTING.
ANGLE FORM INDUSTRIAL THERMOMETERS
7" SCALE CAT NO. 9" SCALE CAT NO.
31/2" STEM 7AU35 31/2" STEM 9AU35
6" STEM 7AU6 6" STEM 9AU6
9" STEM 7AU9 9" STEM 9AU9
12" STEM 7AU12 12" STEM 9AU12
ADD RANGE CODE FROM RANGE TABLE LISTING. EX: 9AU35-120 (RANGE 0-120F)
ABOVE CATALOG NUMBERS DO NOT INCLUDE SOCKETS - ORDER SEPARATELY
FROM THERMOWELL TABLE LISTING.
9SU35 3
9AU35
CASE & SOCKET DIMENSIONS FOR VARI-ANGLE THERMOMETERS
Separable sockets are used to provide pressure tight connections where required. They also offer the advantage of allowing a thermometer to be removed from a system without disturbance. The thermometer is inserted and tightened to the separable socket by means of a threaded swivel nut coupling. Quick response to temperaure change is assured since the stem and socket are precision tapered, providing a metal to metal contact at the sensitive bulb section. To withstand severe corrosive conditions, sockets machined of special materials are available. Pipe threads on separable sockets can be located at different points on the stem. Thread location determines the insertion length and the length available for insulation.
Other Lengths, Materials and NPT Sizes Available - Consult Factory.
THERMOWELLS AND ACCESSORIES
STEM LENGTH BRASS CAT NO. 304SS CAT NO. 316SS CAT NO. NPT INSERTION (U) LAG EXTENSION (L)
3 1/2 E35-75BS E35-75SS E35-75316SS 3/4 2 1/2 —
6 ER6-75BS ER6-75SS ER6-75316SS 3/4 5 —
9 ER9-75BS ER9-75SS ER9-75316SS 3/4 8 —
12 ER12-75BS ER12-75SS ER12-75316SS 3/4 11 —
3 1/2 ESS35-50BS ESS35-50SS ESS35-50316SS 1/2 2 1
3 1/2 ESS35-75BS ESS35-75SS ESS35-75316SS 3/4 2 1
6 EN6-75BS EN6-75SS EN6-75316SS 3/4 2 1/2 2 1/2
9 ENS9-75SS ENS9-75SS ENS9-75316SS 3/4 5 1/2 2 1/2
12 ENS12-75BS ENS12-75SS ENS12-75316SS 3/4 8 1/2 2 1/2
Catalog No. ECC - Brass Cap and Chain Assembly for Test Well
Standard Form - E Series
Long Stem - ER Series
Extension Neck Form - EN Series
Extension Neck, Short Stem ESS Series
Extension Neck, Extension Stem Form ENS Series
Air Duct Stem
Separable Socket Stem
STRAIGHT FORM CAT NO. ANGLE FORM CAT NO. BRASS 304SS 316SS STEM INSERTION U
2" STEM 5SS2 2" STEM 5AS2 E13S-BS E13S-SS E13S-316SS 2" 1 5/16"
4" STEM 5SS4 4" STEM 5AS4 E13L-BS E13L-SS E13L-316SS 4" 3 5/16"
ADD RANGE CODE FROM RANGE TABLE LISTING EX: 5AS2-240 (RANGE 30-240F)
ABOVE CATALOG NUMBERS DO NOT INCLUDE SOCKETS - ORDER SEPARATELY
FROM THERMOWELL TABLE LISTING.
SIX INCH INDUSTRIAL THERMOMETERS
Navy Class Thermometers
The Weiss 6" Navy Class Thermometer is compactly designed, ruggedly constructed and has excellent readability. The blue-reading liquid-in-glass tube maintains accuracy despite vibrations and shock.
This economical thermometer is built for diesel engines, compressors, brine lines and all small piping networks. It is especially adaptable to equipment operating under continuous vibrating conditions.
CASE: Attractive modern design; V-shaped gray Valox case. Wide angle construction allows full scale width for easy reading.
GLASS FRONT: Protective glass cover is retained within the outer edges of the case. Spring pressure created by the V-scale secures the glass against the case and prevents it from rattling. A formed cover plate, easily removable, completes the assembly.
TUBE & SCALE: "Blue-Reading" liquid tube is standard. V-shaped scale is designed for maximum readability with extra large black numbers. Our cross-locked, scale holding device positively prevents loosening or shifting of scale and does away with holes and screws that interfere with scale markings.
STEM ASSEMBLY: Standard fittings of all brass construction which insures proper response to temperature changes. Standard dual threaded socket for 1/2" and 3/4" NPT. Meets all current military specifications (Army, Navy, Air Force).
5AS2
TL5S2
NAVY CLASS THERMOWELLS
SF12-BS Thermowell
E13S-BS Thermowell
THRIFT LINE THERMOMETERS
Same Features as Navy Class Thermometer except:
STEM & SOCKET ASSEMBLY: All brass stem. Removable socket secured to stem by set-screw. Socket standard in brass with 1/2" NPT. Sockets also available with 3/4" NPT.
THRIFT LINE THERMOWELLS
STRAIGHT FORM CAT NO. TL5S2 CAT NO. NPT INSERTION U
ANGLE FORM CAT NO. TL5A2 SF12-BS 1/2" 1 3/8"
SF34-BS 3/4" 1 3/8"
ADD RANGE CODE FROM RANGE TABLE LISTING.
EX:TL5S2-240 (RANGE 30-240F).ABOVE CATALOG
NUMBERS DO NOT INCLUDE SOCKETS-ORDER
SEPARATELY FROM THERMOWELL TABLE LISTING.
SIX INCH HOT & CHILLED WATER THERMOMETERS
The Weiss 6" Hot & Chilled Water Thermometer is our most economcal offering in industrial glass thermometers. The unit features components of non-corrosive materials and its com-pact design and excellent readability makes the HW Series ideal for a variety of general purpose applications. Typical applica-tions include small pipe lines, residential and commercial boilers, solar heating systems.
SCALE LENGTH: 5 1/2"
SCALE: White coated aluminum with permanently baked black markings.
FILL: Weiss "Blue Ribbon Liquid" is non-toxic and environmentally safe.
CASE: Molded V-shaped GE Valox® in gray textured finish.
CONNECTION: Brass 1/2" NPT.
HOT WATER THERMOMETERS
40-260°F (2°div.) and 5-125°C (1°div.)
STRAIGHT FORM CAT NO. HW5S2
ANGLE FORM CAT NO. HW5A2
FURNISHED IN RANGE 40-260 F&C ONLY
CHILLED WATER THERMOMETERS
-40-120°F (2°div.) and -40-50°C (1°div.)
STRAIGHT FORM CAT NO. CW5S2
ANGLE FORM CAT NO. CW5A2
FURNISHED IN RANGE -40-120 F&C ONLY
HW5S2 HW5A2
COMPLETE WITH 1/2" NPT BRASS CONNECTION WITH 13/8" INSERTION.
SIX INCH INDUSTRIAL THERMOMETER RANGES
INDUSTRIAL GLASS TEMPERATURE RANGES
°F RANGES SCALE DIV. RANGE CODE °F &°C RANGES RANGE CODE
40-0-110°F 2° 110 40-0-110F&C 115
20-120°F 2° 120 20-120F&C 125 20-180°F 2° 180 20-180F&C 185 30-240°F 2° 240 30-240F&C 245 30-300°F 5° 300 30-300F&C 305 50-400°F 5° 400 50-400F&C 405
40-260F&C 265
°C RANGES SCALE DIV. RANGE CODE
5-0-50 °C 1° 050
0-110°C 2° 110 0-150°C 2° 150
F&PSI Ranges Available in Fixed Form Only.
°F RANGES SCALE DIV. RANGE CODE °F &°C RANGES RANGE CODE
40-0-110°F 2° 110 40-0-110F&C 115
0-120°F 1° 120 0-120F&C 125 0-160°F 2° 160 0-160F&C 165
30-180°F 2° 180 30-180F&C 185 30-240°F 2° 240 30-240F&C 245 30-300°F 5° 300 30-300F&C 305 50-400°F 5° 400 50-400F&C 405 50-550°F 5° 550 50-550F&C 555 50-750°F 5° 750 50-750F&C 755
°C RANGES SCALE DIV. RANGE CODE °F & PSI RANGES RANGE CODE
20-0-45 °C 1° 042 170-270 F&P 270
0-50 °C 1° 050 200-400 F&P 415 0-100°C 1° 100 80-135 C&Kg/CM2 135 0-160°C 2° 162 0-200°C 2° 200
All Ranges 400°F (200°C) and higher are furnished in Aluminum Case.
© 1997 WEISS INSTRUMENTS, INC.PRINTED IN USA IND-3/02
Manufacturers of Industrial Instruments • Since 1882
Sales Representatives in all Principal Cities
WEISS INSTRUMENTS, INC.
905 WAVERLY AVE., HOLTSVILLE, N.Y. 11742
TEL: (631) 207-1200 • FAX: 631.207.0900
On the Web: www.weissinstruments.com
Distributed by
Send for Weiss Literature to match your specific application.
SG-7/02 SPG-399 CTP-6/03 ARW-11/02 PHC-10/02
IND-4/02 BM-9/01 LT-7/01 GD-8/02 DT-11/02V-11/00
Test kits for boiler waters and applications requiring trace levels of D.O. (ppb range) employ the Rhodazine D methodology. Developed by CHEMetrics, Inc., and approved by ASTM as the reference method for ppb D.O. determination, the Rhodazine D compound in reduced form reacts with dissolved oxygen to form a bright pink reaction product. The method is not subject to salinity or dissolved gas interferences. Oxidizing agents, including benzoquinone, can cause high results.
Reducing agents such as hydrazine and sulfite do not interfere. Results are expressed as ppm (mg/L) or ppb (µg/L) O2.
Low-range dissolved oxygen test kits include a special sampling tube (diagram) for use with boiler feedwater.
This device allows the user to break the tip of the ampoule in a flowing sample stream in order to preclude error from contamination by atmospheric oxygen.
Oxygen (dissolved)
Methods The level of dissolved oxygen in natural waters is often a direct indication of quality, since aquatic plants pro-duce oxygen, while microorganisms generally consume it as they feed on pollutants. At low temperatures the solubility of oxygen is increased; during summer, satura-tion levels can be as low as 4 ppm. Dissolved oxygen (D.O.) is essential for the support of fish and other aquatic life and aids in the natural decomposition of organic matter. Waste treatment plants that employ aerobic digestion must maintain a level of at least 2 ppm dissolved oxygen.
At elevated temperatures, oxygen is highly corrosive to metals, causing pitting in ferrous systems such as high-pressure boilers and deep well oil recovery equip-ment. To prevent costly corrosion damage, the liquids in contact with the metal surfaces must be treated, usually by a combination of physical and chemical means.
Deaeration can reduce the dissolved oxygen concentra-tion of boiler feedwater from several ppm to a few ppb. Chemical reducing agents such as hydrazine, DEHA, or sodium sulfite, may be used instead of or in conjunction with deaeration.
The Indigo Carmine Method
References: ASTM D 888-87, Colorimetric Indigo Carmine, Test Method A. Gilbert, T. W., Behymer, T. D., Castañeda, H. B., “Determination of Dissolved Oxygen in Natural and Wastewaters, “ American Laboratory, March 1982, pp. 119-134.
Test kits for environmental and drinking water applica-tions (ppm range) employ the indigo carmine method.
The reduced form of indigo carmine reacts with D.O. to form a blue product. The indigo carmine methodology is not subject to interferences from temperature, salini-ty, or dissolved gases such as sulfide, which plague users of D.O. meters. Results are expressed as ppm (mg/L) O2.
The Rhodazine D™ Method
References: Developed by CHEMetrics, Inc. ASTM Power Plant Manual, 1st. ed. p. 169 (1984). ASTM D 5543-94 (2005), Low Level Dissolved Oxygen in Water, Test Method A. Department of the Navy, Final Report of NAVSECPHILADIV Project A-1598, Evaluation of CHEMetrics Feedwater Dissolved Oxygen Test Kit (1975).
www.chemetrics.com | 1-800-356-3072 www.chemetrics.com | 1-800-356-3072
If no shelf-life is listed for a product, then the shelf-life is at least 2 years.
Visual Kits Range: 0-20 ppb MDL: 1 ppb / Method: Rhodazine D
Cat#
ULR CHEMets Kit K-7511
ULR CHEMets Refill, 30 ampoules R-7511
Comparator 0, 2, 4, 6, 8, 12, 16, 20 ppb C-7511
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, adhesive mounting clamp, permanent mounting clamp, sampling tube, instructions, and MSDS.
Range: 0-40 ppb MDL: 2.5 ppb / Method: Rhodazine D
Cat#
CHEMets Kit K-7540
CHEMets Refill, 30 ampoules R-7540
Comparator 0, 5, 10, 15, 20, 25, 30, 40 ppb C-7540
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, adhesive mounting clamp, permanent mounting clamp, sampling tube, instructions, and MSDS.
Range: 0-100 ppb MDL: 5 ppb / Method: Rhodazine D
Cat#
CHEMets Kit K-7599
CHEMets Refill, 30 ampoules R-7540
Comparator 0, 10, 20, 30, 40, 60, 80, 100 ppb C-7599
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, adhesive mounting clamp, permanent mounting clamp, sampling tube, instructions, and MSDS.
Range: 5-180 ppb MDL: 5 ppb / Method: Rhodazine D
Cat#
CHEMets Kit K-7518
CHEMets Refill, 30 ampoules, Shelf-life 12 months R-7518
Comparator 5, 20, 40, 60, 80, 110, 140, 180 ppb C-7518
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, adhesive mounting clamp, permanent mounting clamp, sampling tube, instructions, and MSDS.
Range: 0-1 ppm MDL: 0.025 ppm / Method: Rhodazine D
Cat#
CHEMets Kit K-7501
CHEMets Refill, 30 ampoules R-7501
Comparator 0, 0.05, 0.1, 0.2, 0.3, 0.4, 0.6, 0.8, 1.0 ppm C-7501
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, adhesive mounting clamp, permanent mounting clamp, sampling tube, 25 mL sample cup, instructions, and MSDS.
Range: 1-12 ppm MDL: 1 ppm / Method: Indigo Carmine
Cat#
CHEMets Kit K-7512
CHEMets Refill, 30 ampoules R-7512
Comparator 1, 2, 3, 4, 5, 6, 8, 10, 12 ppm C-7512
Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Comparator, 25 mL sample cup, instructions, and MSDS.
Oxygen Continued www.chemetrics.com | 1-800-356-3072
Kit Components common to Oxygen
Description Cat#
Sample Cup Pack, 25 mL (6 ea) A-0013 Sampling Tube Pack (3 ea) A-0020 Mounting Clamp Pack, Adhesive (6 ea) A-0022 Ampoule Blank Pack (5 ea) A-0023 Mounting Clamp Pack, Permanent (6 ea) A-0034
If no shelf-life is listed for a product, then the shelf-life is at least 2 years.
Instructions are posted on our website.
Instrumental Kits
V-2000 Multi-Analyte Photometer (See page 12 for instrumental features)
Range: V-2000: 0.100-1.400 ppm / Spec: 100-800 ppb Method: Rhodazine D
Cat#
Vacu-vials Kit, Shelf-life 12 months K-7553
Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, sampling tube, adhesive mounting clamp, permanent mounting clamp, ampoule blank, instructions, calibration table, and MSDS.
Range: 0.20-2.00 ppm Method: Indigo Carmine
Cat#
Vacu-vials Kit K-7503
Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, 25 mL sample cup, sampling tube, adhesive mounting clamp, permanent mounting clamp, ampoule blank, instructions, calibration table, and MSDS.
Range: 2.0-15.0 ppm Method: Indigo Carmine
Cat#
Vacu-vials Kit K-7513
Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, 25 mL sample cup, ampoule blank, instructions, calibration table, and MSDS.
Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell.
Instrument sold separately.
SAM Single-Analyte Photometers (See page 15 for instrumental features)
Range: 2.0-15.0 ppm Method: Indigo Carmine
Cat#
SAM Kit I-2002
Vacu-vials Kit, 30 ampoules, 25 mL sample cup, ampoule blank, instructions, calibration table, and MSDS. K-7513
SAM Kit comes in a cardboard box and contains everything needed to perform 30 tests: Vacu-vials Kit, SAM Photometer, 9 volt battery, light shield and instructions.
oxygen_rhodazined.doc Version 6, Jun 10
Technical Data Sheet
Oxygen (dissolved) Rhodazine D Method
Applications and Industries: Boiler water, cooling water, seawater; Power generation, petroleum refining, water treatment
References: Developed by CHEMetrics, Inc. ASTM Power Plant Manual, 1st ed. p. 169 (1984). ASTM D 5543-94 (2005), Low Level Dissolved Oxygen in Water, Test Method A.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .