Amendment 0004.pdf

(x)

33330222RF0010006

x x

1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted ; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR

OFFER. If by virtue of this amendment you desire to change an offer already submitted , such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

x

OCON

Washington DC 20013-7012

MRC 1200

P.O. BOX 37012

SMITHSONIAN INSTITUTION

15837050004

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

12. ACCOUNTING AND APPROPRIATION DATA (If required) is not extended.is extended, Items 8 and 15, and returning

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods: (a) By completing

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE CODE

10B. DATED (SEE ITEM 13)

10A. MODIFICATION OF CONTRACT/ORDER NO.

9A. AMENDMENT OF SOLICITATION NO.

CODE

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code)

7. ADMINISTERED BY (If other than Item 6)CODE 6. ISSUED BY

PAGE OF PAGES

4. REQUISITION/PURCHASE REQ. NO.2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO. (If applicable)

1. CONTRACT ID CODE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority) appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

E. IMPORTANT: Contractor is not is required to sign this document and return __________________ copies to the issuing office.

ORDER NO. IN ITEM 10A.

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)15A. NAME AND TITLE OF SIGNER (Type or print)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 15B. CONTRACTOR/OFFEROR 16C. DATE SIGNED

(Signature of person authorized to sign) (Signature of Contracting Officer)

Willard B. Powell

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

Previous edition unusable

3. EFFECTIVE DATE

01/13/2022

9B. DATED (SEE ITEM 11)

01/13/2022

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

A. The Solicitation Number cited above, for the SAO HI: Construct Base Generator and Enclosure at the Smithsonian Institution's Astrophysical Observatory is hereby amended as follows:

A.1. Attached hereto and made part of this Amendment Four are the SI Responses to RFI's for Questions Number 4-11.

B. Attached is the Sign-In sheet from the Preproposal Meeting.

C. Offerors shall acknowledge receipt of all amendments to this solicitation signed and dated and submit with proposal.

Continued ...

Except as provided herein, all terms and conditions of the document referenced in Item 9 A or 10A, as heretofore changed, remains unchanged and in full force and effect .

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 157

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

33330222RF0010006/0004

D. THE BID DUE DATE IS FEBRUARY 1, 2022 AT 5:00PM

EST.

E. ATTACHMENTS

0)

Fire Alarm Test Report

Site Visit 1/11/2022

Except as provided herein, all other provisions, terms and conditions of the Solicitation remain unchanged.

END OF AMENDMENT FOUR

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

Responses to RFI's Number 4-11 Smithsonian Submilleter Array AAN (p. 5-145)

Smithsonian Submillimeter Array R5 (p. 146-15

Fire Alarm Photo

Smithsonian Institution Office of Planning Design & Construction

PROJECT: SAO-HI: Construct Base Generator and Enclosure (SF Project # 1583705)

LAST UPDATED: 1/13/2022

Request for Information SI Response

Factor 4 - Safety/EMR Rate. Section L.27.IV states that “If your EMR is above 1.0, provide a written explanation. Section M.4.2.(d) states “The

Offeror must have an experience modification rating of less than 1.0 to be considered acceptable”. These two sections conflict. We are requesting that Section M be revised to allow Offerors who provide an acceptable written explanation as to why their EMR is over 1.0 as noted in Section L, will be acceptable for the safety factor when their proposal is evaluated.

Section M.4.2.d. is revised to include the statement

"Offeror with an experience modification rating over 1.0 may be considered acceptable with a reasonable written explanation."

Experience on Similar Projects – Please confirm whether or not it is acceptable to utilize key subcontractor experience to meet the similar project experience requirement.

Prime experience worked as a team with the subcontractors in past projects is acceptable to use to meet Experience on Similar Projects.

Key Personnel and Subcontractors – Please confirm if you want resumes of personnel for key subcontractors or just a qualifications (company overview) of the key subcontractor.

Resumes of personnel for key contractors shall be submitted.

Will these materials be delivered to the jobsite, per the contractor’s schedule?

Yes, SI and Hawthorn CAT will coordinate. This section is defined as Owner Furnished Contractor Installed

5 Is the flue shown at sheet M500 owner furnished contractor installed? Yes, Flue shall be supplied by Contractor.

6 Will the owner be responsible for the initial fuel fill? Yes, SI will be responsible for the initial fill.

If there are additional resources required due to material delays, damages, missing or wrong materials, how will this be handled?

Any additional resources required due to material delays, damages, missing or wrong materials will be addressed by

Change Order.

How will troubleshooting for malfunctions, warranty issues be handled if the materials were not procured by the subcontractor

Any additional resources required troubleshooting for malfunctions, warranty issues will be addressed by Change

Order.

9 What is the brand of the existing fire alarm?

Alarm Mfg: Edwards

Alarm Model: EST3/voice evac

See Attached Fire Alarm Photos and Test Report.pdf for additional information

Please clarify the SOW breakdown for phase #1 and phase #2 that was mentioned during the bid walk. It was mentioned that the interior walls of the gen bldg. may not be built during phase #1, if so, what happens to the panel 2EG? There are some circuits for the generator in there.

Provide a weatherproof enclosure and installation

See G001 Note

BASE BID PROJECT DESCRIPTION

Base Bid Drawings:

• E002 - Change 2EG panel enclosure to NEMA 4X Stainless

Steel

If the project is broken down in phases what scope of the plumbing will be incorporated into each phase?

See G001 Notes

BASE BID PROJECT DESCRIPTION

Base Bid Drawings:

•P001 - Provide Plumbing work identified in General and

Fire Safety Notes and Site Plan

•P102 - Provide Plumbing work identified on Plan to Valve

Box and include pipe sleave from valve box to stub up in slab adjacent to curb and cap water line.

•P201 - Provide Plumbing work identified on P201- 1 Base

Facility Plumbing Diagram and 2 Generator

Building Plumbing Diagram to Valve Box and include pipe sleave from valve box to stub in slab adjacent to curb and cap water line.

•P301 - Provide Plumbing work identified on Details 2-5

OPTION DESCRIPTION

•All Plumbing work including Eye Wash Station

Option Drawings:

•P001 - Provide Plumbing work identified on Plumbing

Fixture Schedule

•P102 - Provide Plumbing work identified on Plan from

Valve Box pipe sleave stub up to fixtures, Hose Bib and Eye Wash unit.

•P201 - Provide Plumbing work identified on P201- 2

Generator Building Plumbing Diagram from Valve Box pipe sleave stub up to fixtures, Hose Bib and Eye Wash unit.

•P301 - Provide Plumbing work identified on Details 1-3

Submittal - Smithsonian Institution Submittal No:

rev. 0a

Facility

SAO SMA,

Hilo, HI

Project/ Contract Generator SF Project No: 1583705 PO No: 18-PO-730-0000407210

Pkg. No:

180217

Date:

10/25/2018

Contractor:

Hawthorne Power Systems

Subcontractor/Supplier:

ACTION

Ite m

N o:

Specification Section and

Paragraph No:

Description of Item

(Size, Type, Name, Manufacturer, Use, Etc.) N o.

o f

C op ie s

R et ur ne d

A pp ro ve d

A pp ro ve d A s N ot ed

R ev is e

R es ub m it

Contractor Signature A/E Signature

Title, Date Date

I hereby certify that this submittal has been reviewed for accuracy, completeness, and compliance with contract requirements (FAR 52.236-21) Sub Consultant

Review Comments

1. Date

Action By Date 01/08/2019

COTR, Simon Radford

Approval of this submittal is subject to the provisions of the contract drawings and specifications. This action is for general concurrence only and the Government is not responsible for errors or omission.

SUBMITTAL LOG DATES: From contractor [__________], To reviewer [__________], From reviewer [__________], To Contractor [__________] Distribution: ( ) Contractor Job File ( ) COR ( ) A/E ( ) Sub Consultant ( ) COR Interim ( ) Contractor Interim

ONE (1) CAT C9 Standby Diesel Generatot Set, Rated at 300 kW ONE (1) ASCO Avtron 4500 Load Bank, 300 kW

X

The SI RFQ specified EMCP version 4.3. Hawthorne proposes version 4.2. This is acceptable so long as the proposed functionality will meet all the other requirements.

Clifford Yuen, Engine Business Manager · Ed Dawe, Sales Engineer · Pat Simonds, Project Manager · Geoffrey Torres, Sales Engineer · Brian Oshiro, Project Engineer · Victor Ramos, Project Engineer · Jadene Texeira, Project Coordinator · Remar Ibanez, Project Engineer · Albert Macpherson, Project Engineer ·

SMITHSONIAN INSTITUTE SUBMILLIMETER

ARRAY

Project # 180217

ATTN: Smithsonian Institution

Astrophysical Observatory 60 Garden St

Cambridge, MA

(617) 495-7401

GENERATOR SET SUBMITTAL

*Images may not reflect actual packages

ONE (1) CAT C9 Standby Diesel Generator Set, Rated at 300 kW ONE (1) ASCO Avtron 4500 Load Bank, 300 kW

Revision 0a, Submitted: October 25, 2018

Submittal Prepared By:

Albert MacPherson

Hawthorne Power Systems 94-025 Farrington Highway

Waipahu, HI 96797 amacpherson@hawthornecat.com (808)-676-0259 mailto:amacpherson@hawthornecat.com ChanVC Typewriter Smithsonian Submilleter Array - AAN (pg. 5-145)

PROJECT NAME: SMITHSONIAN INSTITUTE SUBMILLIMETER ARRAY

HAWTHORNE IMACS # 180217

SALES ENGINEER: ED DAWE

PROJECT COORDINATOR: JILL SANTOS

TABLE OF CONTENTS

TAB 1: GENERAL INFORMATION

1.1 Hawthorne CAT – Bill of Materials

1.2 Notes, Clarifications & Exceptions

1.3 Hawthorne CAT Contact Information & Hours of Operation

TAB 2: INSTALLATION NOTES

2.1 Installation Notes & Considerations

2.2 Caterpillar C9 Standby Diesel Generator Set Shop Drawings

2.2.1 Installation/Layout Drawings

2.2.2 Wiring Diagrams/Schematics

2.2.3 Anchor Calculations

TAB 3: GENERATOR SET CATALOG/DATASHEETS

3.1 Caterpillar C9 Standby Diesel Generator Set Data Sheet

3.2 Technical Generator Data

3.3 Engine Performance Data

3.4 Auxiliary Equipment Data

3.4.1 IVR Integrated Voltage Regulator

3.4.2 Permanent Magnet Excitation

3.4.3 EMCP 4.2 Generator Set Controller

3.4.3.1 Local Annunciator Module (CAN)

3.4.3.2 Remote Annunciator Module (RS-485)

3.4.3.3 Belden Cable (Recommended, Not Provided)

3.4.4 Engine Controller

3.4.5 Dual 400A Manual Operated Circuit Breakers

3.4.6 CAT Battery Set

3.4.7 UL-Listed 10A Battery Charger

3.4.8 Jacket Water Heater

3.4.9 Generator Space Heater

3.4.10 Sub Base Fuel Tank

3.4.11 Aluminum Sound Attenuated Enclosure

3.4.12 125A Load Center

3.4.13 LED Light Kit

3.4.14 Dampers and Actuators

3.4.15 Certifications

SALES ENGINEER: ED DAWE

TABLE OF CONTENTS

TAB 4: ASCO AVTRON 4500 LOAD BANK, 300 KW

4.1 ASCO Avtron 4500 Load Bank, Data Sheet

4.2 ASCO Avtron 4500 Load Bank, Shop Drawings

TAB 5: CATERPILLAR WARRANTY

5.1 CAT Extended 5 Year Platinum Plus Warranty

SUBMITTAL APPROVAL

Submittal Approved By:_______________________________________________________________________________________

Date:_______________________________________________________________________________________________________ simon radford Approved as Noted: The SI RFQ specified EMCP version 4.3. Hawthorne proposes version 4.2. This is acceptable so long as the proposed functionality will meet all the other requirements.

simon radford Simon simon radford Simon Radford, COTR simon radford 01/08/2019

SALES ENGINEER: ED DAWE

TAB 1: GENERAL INFORMATION

1.1 Hawthorne CAT – Bill of Materials

1.2 Notes Clarifications & Exceptions

1.3 Hawthorne CAT Contact Information & Hours of Operation

GENERAL INFORMATION

1.1 Hawthorne CAT - Bill of Materials

Smithsonian Institute Submillimeter Array

HAWTHORNE CAT – Bill of Materials

One New Caterpillar Generator Set

Genset Model: C9

Rating: 300 kW (Standby Rated) Voltage: 480/277 Volt, 3-phase, 4-wire, 60 Hz.

Fuel: Diesel

Bill of Materials

LINE ITEM #1 EXTENDED DESCRIPTION:

Qty. (1) CAT Generator Set Model: C9 Rating: 300 kW / 375 kVA Voltage: 480Y, 3-phase, 4-wire, 60 Hz Engine: Diesel, 1800 RPM, ADEM A4 Electronic Engine Controller Certification: EPA Emergency Stationary Certified, I BC Seismic

UL2200

Alternator End & Attachments LC5134L Frame Generator, Single Bearing, Rated for 130°C Temperature Rise CAT Integrated Voltage Regulator (integrated with EMCP control panel) Anti-Condensation Space Heater PMG Excitation System 12% sub-transient reactance

Control Panel: EMCP 4.2 Digital Control Panel Digital Display

Engine: Oil Pressure, Coolant Temp, Engine Hours, RPM Generator: Amps, Volts, Power Fault indication and fault logging

Volt-free (Form C) Engine Run contacts Audible Alarm NFPA 110 Compliant Remote Annunciator Panel (requires Belden 9841 cable; cable by others)

Circuit Breakers:

Qty. (2) 400A Circuit Breaker, UL-Listed, 100% Rated, with LS/I (S or I) Functions, Mounted on genset SUSE Labeled

Fuel & Mounting System Generator set is suitable for outdoor installation

Fuel Filter (spin-on) with fuel/water separator Diesel Fuel base tank with 660 Gallon Capacity (29-hr run time @ 100% load)

Fuel Level Alarms: Low Fuel and Tank Leak Construction: Steel

Seismic rated integral isolators Enclosure:

Generator set is suitable for outdoor installation Color: White Sound Attenuated Enclosure rated at 75 dBA at 23 feet, Construction: Aluminum Lights: AC/DC Distribution Panel: 125A Misc: Convenience Receptacle, enclosure heater

Cooling System:

Unit Mounted Radiator Rated for operation in 122°F ambient temperature 50/50 Antifreeze & Water Mixture Jacket Water Heater Low Coolant Level Shutdown

Exhaust System Critical grade exhaust silencer integral to enclosure-no contractor installation required

Starting and Charging System:

Electric Starting Motor 24V Lead Acid Engine-Starting Battery UL Listed Battery Charger:

10A DC Maximum Charging Current Automatic Dual Rate (float/equalize) Charging NFPA 110 Alarm Contacts Factory installed on equipment

Jacket Water Heater (to facilitate quicker starting times) Factory Testing:

30 minute 0.8 pf Load Bank Testing Included Project Management

3 Site trips Delivery and pre-construction site meeting Pre-startup inspection Customer Training (Operation and Maintenance)

Onsite Testing, Startup, and Commissioning:

CAT Startup Services with CAT certified technicians (includes lube oil and coolant) 4-hour 1.0 pf Load Bank Testing Included Cold Start Test and/or building load test

Miscellaneous Items:

Spare Parts per specification

Maintenance Service:

2-year CAT PM Services by CAT certified technicians (3 quarterly inspections + 1 inspection).

Quarterly Service includes 58-point inspection 1-hour building load transfer test Annual includes lube oil and filter change

DIMENSIONS:

178” (L) x 81” (W) x 112” (H) 11,500 lbs.

OPTION ITEM EXTENDED DESCRIPTION:

Qty. (1) Load Bank Type:

Rating: 300 kW Load Steps: 5 kW Voltage: 480Y, 3-phase, 4-wire, 60 Hz Control Panel: Microprocessor Based;

Enclosure: Outdoor (304 stainless steel construction)

DIMENSIONS:

61” (L) x 47” (W) x 51” (H) 1,100 lbs.

1.2 Notes, Clarifications & Exceptions

Smithsonian Institute Submillimeter Array

NOTES, CLARIFICATIONS, DEVIATIONS, & EXCEPTIONS

Notes

1. The quotation is based on the following documents (no other documents or plans have been reviewed):

a. Project: Project No. 1583705 (Generator) Submillimeter Array SAO Hilo, HI

b. Specifications: RFQ Project No. 1583705, 263213 Engine Generators

c. Drawings: E-6

d. No other plans or specifications have been reviewed.

2. Proposal scope limited to items specifically listed in this proposal.

3. All “shipped loose items” are for contractor installation

4. Fuel for startup or testing not included.

5. Temporary generator set (if required) not included in Hawthorne’s scope of work or supply. If temporary power is needed, please contact the Hawthorne Rent-It Service at (808)-368-5445 to obtain a quotation.

6. Offloading not included.

7. Installation, including but not limited to: anchoring, electrical conduit, fuel oil and exhaust piping, interconnecting wire and cable, not included.

8. 3rd Party testing, such as NETA, not included to be done by others (independent testing agency). Ground Testing not included.

9. Protective device coordination, short circuit study, and arc flash analysis by others.

10. There may be overlap between mechanical and electrical Scope of Work/Supply particularly on the fuel system and exhaust system. We recommend the purchaser consult with both contractors to determine any overlap or gaps in supply.

11. Scope of Work/Supply is based on all onsite work being performed M-F 8AM-4PM. Weekend and/or overtime service hours are available. A copy of our non-standard service rates is available upon request. Four (4) week notice is required for field service.

Clarifications, Deviations, & Exceptions

1. 263213 Para. 1.05.A.3: Seismic anchoring detail to be provided by California P.E.

2. 263213 Para. 1.12.A: Maintenance load testing to be performed using available building load.

A portable load bank will not be used for this test.

3. 263213 Para. 3.04: Specifications 230553 “Identification for HVAC Piping and Equipment” and

Section 260553 “Identification for Electrical Systems” not provided for review. All identification tags and markings to be standard manufacture’s offering.

4. 263213 Para. 2.08: Load bank is resistive only (1.0 pf) in lieu resistive/reactive (0.8 pf).

Typically, permanent load banks are resistive only.

5. 263213 Para. 3.05.D.6: Exhaust system is standard factory offering, therefore, field testing not required.

6. The RFQ indicates the CAT EMCP 4.3 or better is provided but we are proposing the EMCP

4.2. The main difference between the 4.2 and 4.3 panels are the number of input and outputs.

However, the EMCP 4.2 has adequate inputs to meet the other requirements in the spec.

7. 263213 Para. 3.02-3.03: Installation is not included in this Scope of Supply.

8. 263213 Para. 3.05.: Infrared scanning not included in this Scope of Work. This work is typically provided by the installing contractor and included along with other apparatus requiring scanning at completion of project.

1.3 Hawthorne CAT Contact Information & Hours of

Operation

Company Address

Hawthorne Pacific Corp.

Systems – Waipahu

94-025 Farrington Hwy

Waipahu, Hawaii 96797

Sales/Engineering Contacts:

Clifford Yuen: Engine Business Manager (808)-676-0322

Edward Dawe: Sales Engineer (808)-676-0244

Geoffrey Torres: Sales Engineer (808)-676-0830

Jill Santos: Project Administrator (808)-676-0277

Jadene Texeira: Project Coordinator (808)-676-0248

Pat Simonds: Project Manager (808)-676-0260

Brian Oshiro: Project Engineer (808)-676-0239

Victor Ramos: Project Engineer (808)-676-0327

Remar Ibanez Project Engineer (808)-676-0234

Albert Macpherson Project Engineer (808)-676-0259

Department Hours of Operation Phone

Sales: 7:30 am – 4:00 pm, Mon-Fri (808)-676-0205

Parts: 7:00 am – 3:30 pm, Mon-Fri (808)-676-0200

Service: 7:00 am – 3:30 pm, Mon-Fri (808)-676-0311

After Hours Contact:

Parts: (808)-864-5041

Service: (808)-864-4916 http://www.hawthornecat.com

TAB 2: GENERATOR SET DRAWINGS

2.1 Installation Notes and Considerations

2.2 Caterpillar C9 Standby Diesel Generator Set Shop Drawings

2.2.1 Installation/Layout Drawings

2.2.2 Wiring Diagrams/Schematics

2.2.3 Anchor Calculation

GENERATOR SET DRAWINGS

2.1 Installation Notes and Considerations

SUBJECT: 180217 – SMITHSONIAN INSTITUTE SUBMILLIMETER ARRAY – GENERATOR SET INSTALLATION NOTES &

CONSIDERATIONS

GENERAL INSTALLATION REQUIREMENTS:

This generator set installation will require the following items to be completed prior to startup/testing date:

1. Generator set is recommended to be bolted down. Anchoring detail is site specific and is not within the scope of Hawthorne Pacific Corp.

2. Generator set must be properly grounded (chassis AND electrical system) per NEC requirements.

3. The generator set startup and testing will require an initial fill of 660 gallons and top off after field testing of an estimate of 52 Gallons of #2 ULSD fuel (both on and off- road fuels are acceptable).

4. For indoor installations, exhaust piping must not apply any torque/weight to the generator set. Any rigid or liquidtite conduit is not allowed to be connected directly to the generator set. There must be at least 6" of flex conduit when connected to the generator.

5. Engine Crankcase breather hose must be routed into the radiator shroud with a slight decline and does not allow the hose to have any low points, in order to prevent any collection of oil inside of the hose.

6. Control and Shore Power Wiring must be stranded and completed per the schematic on the following page.

The schematic is typical for a basic generator set installation.

7. Clean work area. The generator set must have sufficient clearance for the Hawthorne technicians to safely perform startup/testing. Also:

a) Prevent trash/debris from falling onto/into the generator set (e.g., Exhaust insulation hardware can fall into the radiator shroud, which can potentially puncture and destroy the radiator).

8. On-site parking must be provided for at least two service vehicles during the entire duration of the start up and testing. Any parking related fees or delay costs are not included.

9. Safety and other site required orientations must be coordinated prior to the startup and testing.

10. Access to 120VAC power outlets must be provided during the startup and testing.

11. Work in the immediate area of the generator set and ATS(s) performed by others that is scheduled during the startup and testing must be coordinated with the Project Manager prior to arrival of the technicians.

WELDING:

Welding on the generator set or its ancillary and auxiliary components is not permitted unless under the advice of the designated Hawthorne Power Systems Project Manager for this project.

Equipment Lug Size Generator Circuit Breaker Lug # (2) 3/0 - 250 kcmil per phase ATS Lug Size Customer Provided Contract Drawing Drawings Not provided

Conduit # Wire Requirements Function

From To

1 Customer ATS Qty 6 - AWG THHN Stranded Auto Start/Stop, Aux

Contacts

Qty 2 - AWG THHN Stranded Annunciator 12VDC

Power

Qty 1 - Belden 9841 Cable Annunciator Comm

Connection

3 **SCADA Connection Qty 1 - Belden 9841 Cable BMS/SCADA Comm, Over

MODBUS RTU

AC Power for Generator

Heaters Qty 3 - AWG THHN Stranded

(L1, L2 , N and G) For 208/240VAC Shore

Equipment Interconnection

CAT C9 Generator Set Control Panel

Generator Remote

Annunciator

GENERATOR SET DRAWINGS

2.2 Caterpillar C9 Standby Diesel Generator Set Shop

Drawing

CATERPILLAR C9 STANDBY DIESEL

GENERATOR SET SHOP DRAWINGS

2.2.1 Installation/Layout Drawings

2.2.2 Wiring Diagrams/Schematic

amacpherson Rectangle

2.2.3 Anchor Calculations

JOB NAME:

SEISMIC DESIGN BLDG, ELEVATION RF BUILDING CODE

CLIENT NAME: = / EQUIP. LOCATION5572 ALHAMBRA AVENUE, S ds 1.04 CBC-2013

PUMP STATION # 2 SEISMIC CALCULATION WORKSHEET

SAN DIEGO, CA.

100 ft.

= = LOAD COMBINATION

= ** Assume worst GF ( + ) = or below ground [ASCE 7-10, Section 12.4.3.2 eq.7]

0.9 DL 2.50 E

"CALL US - TO SET THINGS RIGHT" 7/3/2018 SS case location.Ωo ap, Rp, Ωo (per ASCE 7-10, TABLE 13.6-1)

2.5 IBC 2012/CBC 2013

LRFD 2012/2013

www.caldyn.com DATE: PRP. BY.: CALDYN JOB #: R p 6 X 0 ft.

PH (323) 223 3882 FX (323) 223 7941 a p 2.5 **z 0 ft.

LOS ANGELES, CA 90032 HAWTHORNE POWER I p 1.5 h 100 ft.

EQUIPMENT TAG:

EQUIPMENT/ MOUNTING LOCATIONS: APPLIED SEISMIC FORCE/ CALCULATIONS:

/ =F p W p 0.47g

CP1 - 3

ANCHORAGE TO CONCRETE SHT. NUMBER:

= Applied Lateral Seismic Force = x x …………………………… = = Vertical component of seismic force = x x x ……………………. =

CALCULATE PULLOUT LOAD DUE TO OVERTURNING (WORST CASE)

M OT = Overturning moment = x ) + ( x ( D / 2 )) ………………… = M R = Resisting moment = ( x x ( D / 2 )) ………………………………. = T M M

0.9 W p 8411 lb.-in.

H cg F pv 36471 lb.-in. ( Fph

F pv 1.0 0.2 S ds W p 186 lbs.

F ph 2.50 0.47g W p 1046 lbs.

DHcg

Q

R Fph

Fpv

Wp

A-A

T net = Pullout load/ mtg. pt. = ( M OT - M R ) / ( R x D ) ………………………………. = T net = <<<---Tension demand T anch = x T net = ASCE 7-10, Section 13.4.2

CALCULATE SHEAR LOAD (WORST CASE)

= max. operating weight = V net = Shear load/ anchor = / N = V anch = x V net = ASCE 7-10, Section 13.4.2 = mounting length = ANCHORAGE REQUIREMENTS:

ti idth HILTI HIT RE 500 V3 HAS ED 21 i (4) 1/2''Ø L 33 in.

262 lbs.

669 lbs.

669 lbs. 1.0 669 lbs.

W P 890 lbs. F ph 262 lbs. 1.0

L

PLAN VIEWELEVATION VIEW

= mounting width = HILTI HIT RE 500 V3 HAS E = Vertical c.o.g. = = min. eff. Embedment = = anchor qty. along length = = min. edge distance = w/ special inspection per ICC ESR-3814 = anchor qty. along width = = min. anchor spacing = T anch = = total anchor qty. = = min. concrete thickness = min. 4000 psi NORMAL Weight Concrete

T T i it LRFD 2012/20131328 lbs N 4 ct 12 in.

669 lbs.

R 2 ed 4 in.

Q 2 sp -

H cg 33 in. emb 2 3/4 in.

D 21 in. (4) 1/2''Ø

T cap = Tension capacity = LRFD 2012/2013 NOTES/ REMARKS: V cap = Shear capacity = LRFD 2012/2013 V anch =

CHECK ANCHORAGE: ( T anch / T cap ) 5/3 + ( V anch / V cap ) 5/3 must be less than

(( / ) 5/3 + ( / ) 5/3 ) = <0.36 1.0 PASS

1849 lbs. 262 lbs.

- 1.0 669 lbs. 1328 lbs. 262 lbs. 1849 lbs.

1328 lbs.

ed emb ct sp

Equipment base ed sp amacpherson Text Box This is an example from another customer, more details from contractor required in order to provide accurate calculations.

TAB 3: GENERATOR SET CATALOG/DATASHEETS

3.1 Caterpillar C9 Standby Diesel Generator Set Data Sheet

3.2 Technical Generator Data

3.3 Engine Performance Data

3.4 Auxiliary Equipment Data

3.4.1 IVR Integrated Voltage Regulator

3.4.2 Permanent Magnet Excitation

3.4.3 EMCP 4.2 Generator Set Controller

3.4.3.1 Local Annunciator Module (CAN)

3.4.3.2 Remote Annunciator Module (RS-485)

3.4.3.3 Belden Cable ( Recommended, Not Provided)

3.4.4 Engine Controller

3.4.5 Dual 400 A Manual Operated Circuit Breakers

3.4.6 CAT Battery Set

3.4.7 UL-Listed 10A Battery Charger

3.4.8 Jacket Water Heater

3.4.9 Generator Space Heater

3.4.10 Sub Base Fuel Tank

3.4.11 Aluminum Sound Attenuated Enclosure

3.4.12 125A Load Center

3.4.13 LED Light Kit

3.4.14 Dampers and Actuators

3.4.15 Certifications

GENERATOR SET

CATALOG/DATASHEETS

3.1 Caterpillar C9 Standby Diesel Generator Set

Data Sheet

C9 300 ekW/ 375 kVA

60 Hz/ 1800 rpm/ 480 V

Image shown may not reflect actual configuration

Metric English

Package Performance

Genset Power Rating with Fan @ 0.8 Power Factor 300 ekW

Genset Power Rating 375 kVA

Aftercooler (Separate Circuit) N/A N/A

Fuel Consumption

100% Load with Fan 86.0 L/hr 22.7 gal/hr

75% Load with Fan 66.8 L/hr 17.6 gal/hr

50% Load with Fan 51.5 L/hr 13.6 gal/hr

25% Load with Fan 33.1 L/hr 8.7 gal/hr

Cooling System¹

Engine Coolant Capacity 13.9 L 3.7 gal

Inlet Air

Combustion Air Inlet Flow Rate 26.0 m³/min 916.6 cfm

Max. Allowable Combustion Air Inlet Temp 50 ° C 123 ° F

Exhaust System

Exhaust Stack Gas Temperature 497.3 ° C 927.2 ° F

Exhaust Gas Flow Rate 69.7 m³/min 2460.9 cfm

Exhaust System Backpressure (Maximum Allowable) 10.0 kPa 40.0 in. water

TSS-DM8168-04-GS-EPG-8411623.pdf © 2017 Caterpillar All Rights Reserved Page 1 of 3

ELECTRIC POWER - Technical Spec Sheet

300 ekW/ 375 kVA/ 60 Hz/ 1800 rpm/ 480 V/ 0.8 Power Factor

Rating Type: STANDBY Emissions: U.S. EPA Certified for Stationary Emergency Use Only (Tier 3 Nonroad Equivalent Emission Standards)

STANDARD

DEFINITIONS AND CONDITIONS

1. For ambient and altitude capabilities consult your Cat dealer. Air flow restriction (system) is added to existing restriction from factory.

2. UL 2200 Listed packages may have oversized generators with a different temperature rise and motor starting characteristics. Generator temperature rise is based on a 40° C ambient per NEMA MG1-32.

3. Emissions data measurement procedures are consistent with those described in EPA CFR 40 Part 89, Subpart D & E and ISO8178-1 for measuring HC, CO, PM, NOx. Data shown is based on steady state operating conditions of 77° F, 28.42 in HG and number 2 diesel fuel with 35° API and LHV of 18,390 btu/lb. The nominal emissions data shown is subject to instrumentation, measurement, facility and engine to engine variations. Emissions data is based on 100% load and thus cannot be used to compare to EPA regulations which use values based on a weighted cycle.

Heat Rejection

Heat Rejection to Jacket Water 120 kW 6838 Btu/min

Heat Rejection to Exhaust (Total) 320 kW 18223 Btu/min

Heat Rejection to Aftercooler 92 kW 5239 Btu/min

Heat Rejection to Atmosphere from Engine 23 kW 1312 Btu/min

Heat Rejection to Atmosphere from Generator 22 kW 1245 Btu/min

Alternator²

Motor Starting Capability @ 30% Voltage Dip 683 skVA

Current 451 amps

Frame Size

Excitation SE

Temperature Rise 130 ° C

Emissions (Nominal)³

NOx 2196.0 mg/Nm³ 4.0 g/hp-hr

CO 115.5 mg/Nm³ 0.2 g/hp-hr

HC 23.1 mg/Nm³ 0.1 g/hp-hr

PM 12.7 mg/Nm³ 0.0 g/hp-hr

TSS-DM8168-04-GS-EPG-8411623.pdf © 2017 Caterpillar All Rights Reserved Page 2 of 3

ELECTRIC POWER - Technical Spec Sheet

300 ekW/ 375 kVA/ 60 Hz/ 1800 rpm/ 480 V/ 0.8 Power Factor

Rating Type: STANDBY Emissions: U.S. EPA Certified for Stationary Emergency Use Only (Tier 3 Nonroad Equivalent Emission Standards)

STANDARD

C9 amacpherson Text Box

PMG

amacpherson Text Box

LC5034J

amacpherson Text Box

LC5034L

amacpherson

1044 sKVA

Applicable Codes and Standards:

AS1359, CSA C22.2 No100-04, UL142,UL489, UL869, UL2200, NFPA37, NFPA70, NFPA99, NFPA110, IBC, IEC60034-1, ISO3046, ISO8528, NEMA MG1-22,NEMA MG1-33, 2006/95/EC, 2006/42/EC, 2004/108/EC.

Note: Codes may not be available in all model configurations. Please consult your local Cat Dealer representative for availability.

Ratings are based on SAE J1349 standard conditions. These ratings also apply at ISO3046 standard conditions

Fuel Rates are based on fuel oil of 35º API [16º C (60º F)] gravity having an LHV of 42 780 kJ/kg (18,390 Btu/lb) when used at 29º C (85º F) and weighing 838.9 g/liter (7.001 lbs/U.S. gal.). Additional ratings may be available for specific customer requirements, contact your Cat representative for details. For information regarding Low Sulfur fuel and Biodiesel capability, please consult your Cat dealer.

www.Cat-ElectricPower.com

STANDBY:Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, ADEM, EUI, S•O•S, "Caterpillar Yellow" and the "Power Edge" trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Performance No.: DM8168-04 Feature Code: C09DE48 Generator Arrangement: 4490575

Source Country: U.S.

Date: 07/26/2017

TSS-DM8168-04-GS-EPG-8411623.pdf © 2017 Caterpillar All Rights Reserved Page 3 of 3

ELECTRIC POWER - Technical Spec Sheet

300 ekW/ 375 kVA/ 60 Hz/ 1800 rpm/ 480 V/ 0.8 Power Factor

Rating Type: STANDBY Emissions: U.S. EPA Certified for Stationary Emergency Use Only (Tier 3 Nonroad Equivalent Emission Standards)

STANDARD

3.2 Technical Generator Data

8/28/2018 Caterpillar Generator Data https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 1/7

G�������� D��� A����� 28, 2018 For Help Desk Phone Numbers Click here

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874

Spec Information

Generator Specification

Frame: LC5034L Type: LC No. of Bearings: 1 Winding Type: RANDOM WOUND Flywheel: 14.0 Connection: SERIES STAR Housing: 1 Phases: 3 No. of Leads: 12 Poles: 4 Wires per Lead: 1 Sync Speed: 1800 Generator Pitch: 0.6667

Generator Efficiency

Per Unit Load kW Efficiency %

0.25 75.0 90.5

0.5 150.0 93.5

0.75 225.0 94.1

1.0 300.0 94.0

Reactances Per Unit Ohms

SUBTRANSIENT - DIRECT AXIS X''d 0.0715 0.0439

SUBTRANSIENT - QUADRATURE AXIS X''q 0.0881 0.0541

TRANSIENT - SATURATED X'd 0.1203 0.0739

SYNCHRONOUS - DIRECT AXIS Xd 2.6973 1.6572

SYNCHRONOUS - QUADRATURE AXIS Xq 1.6172 0.9936

NEGATIVE SEQUENCE X2 0.0799 0.0491

ZERO SEQUENCE X0 0.0050 0.0031

Time Constants Seconds

OPEN CIRCUIT TRANSIENT - DIRECT AXIS T'd0 2.2530 SHORT CIRCUIT TRANSIENT - DIRECT AXIS T'd 0.1000 OPEN CIRCUIT SUBSTRANSIENT - DIRECT AXIS T''d0 0.0170 SHORT CIRCUIT SUBSTRANSIENT - DIRECT AXIS T''d 0.0100 OPEN CIRCUIT SUBSTRANSIENT - QUADRATURE AXIS T''q0 0.1830 SHORT CIRCUIT SUBSTRANSIENT - QUADRATURE AXIS T''q 0.0100 EXCITER TIME CONSTANT Te 0.0100 ARMATURE SHORT CIRCUIT Ta 0.0150

Short Circuit Ratio: 0.49 Stator Resistance = 0.0171 Ohms Field Resistance = 0.343 Ohms

Voltage Regulation

Voltage level adjustment: +/- 5.0% Voltage regulation, steady state: +/- 0.5% Voltage regulation with 3% speed change: +/- 0.5% Waveform deviation line - line, no load: less than 2.0% Telephone influence factor: less than 50

Generator Excitation

No Load Full Load, (rated) pf

Series Parallel

Excitation voltage: 10.6 Volts 40.67 Volts Volts Excitation current 1.06 Amps 3.35 Amps Amps https://tmiwebclassic.cat.com/tmi/tmihome/TMIContactInfo.htm https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 2/7

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874

Generator Mechanical Information

Center of Gravity

Dimension X -530.0 mm -20.9 IN.

Dimension Y 0.0 mm 0.0 IN.

Dimension Z 0.0 mm 0.0 IN.

"X" is measured from driven end of generator and parallel to rotor. Towards engine fan is positive. See General Information for details "Y" is measured vertically from rotor center line. Up is positive.

"Z" is measured to left and right of rotor center line. To the right is positive.

Generator WT = 895 kg * Rotor WT = 357 kg * Stator WT = 538 kg

1,973 LB 787 LB 1,186 LB

Rotor Balance = 0.0508 mm deflection PTP Overspeed Capacity = 125% of synchronous speed

Generator Torsional Data

J1 = Coupling and Fan

J2 = Rotor

TOTAL J = J1 + J2 + J3

J3 = Exciter End

K1 = Shaft Stiffness between J1 + J2 (Diameter 1)

K2 = Shaft Stiffness between J2 + J3 (Diameter 2)

J1 K1 Min Shaft Dia 1 J2 K2 Min Shaft Dia 2 J3

6.3 LB IN. s2 37.0 MLB IN./rad 4.5 IN. 20.5 LB IN. s2 41.7 MLB IN./rad 4.3 IN. 2.0 LB IN. s2

0.711 N m s2 4.18 MN m/rad 115.0 mm 2.32 N m s2 4.71 MN m/rad 110.0 mm 0.23 N m s2

Total J

28.9 LB IN. s2

3.261 N m s2

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874 https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 3/7

Generator Cooling Requirements - Temperature - Insulation Data

Cooling Requirements: Temperature Data: (Ambient 40 0C) Heat Dissipated: 19.1 kW Stator Rise: 130.0 0C Air Flow: 30.6 m3/min Rotor Rise: 130.0 0C

Insulation Class: H

Insulation Reg. as shipped: 100.0 MΩ minimum at 40 0C

Thermal Limits of Generator

Frequency: 60 Hz Line to Line Voltage: 480 Volts B BR 80/40 318.0 kVA F BR -105/40 362.0 kVA H BR - 125/40 398.0 kVA F PR - 130/40 398.0 kVA H PR - 150/40 422.0 kVA H PR27 - 163/27 437.8 kVA

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874

Starting Capability & Current Decrement

Motor Starting Capability (0.6 pf)

SKVA

Percent

Volt Dip

62 2.5 128 5.0 197 7.5 271 10.0 348 12.5 430 15.0 517 17.5 609 20.0 707 22.5 812 25.0 924 27.5

1,044 30.0 1,173 32.5 1,311 35.0 1,461 37.5 1,624 40.0 https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 4/7

Current Decrement Data

E Time

Cycle

AMP

0.0 6,262

1.0 3,691

2.0 2,840

3.0 2,378

4.0 2,035

5.0 1,754

7.5 1,441

10.0 1,509

12.5 1,592

15.0 1,663

20.0 1,610

25.0 1,498

30.0 1,441

35.0 1,422

40.0 1,420

45.0 1,423

Instantaneous 3 Phase Fault Current: 6262 Amps Instantaneous Line - Line Fault Current: 5122 Amps Instantaneous Line - Neutral Fault Current: 8584 Amps

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874

Generator Output Characteristic Curves

Open Circuit Curve

Field

Current

Line -

Line Volt

0.0 0

14.9 288

17.7 336

21.0 384

25.7 432

33.3 480

48.3 528

80.8 576

155.1 624

329.4 672 https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 5/7

Short Circuit Curve

Field

Current

Armature

Current

0.0 0

39.6 271

46.2 316

52.8 361

59.3 406

65.9 451

72.5 496

79.1 541

85.7 586

92.3 631

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874

Generator Output Characteristic Curves

Zero Power Factor Curve

Field

Current

Line -

Line Volt

65.9 0

80.6 240

83.4 288

86.8 336

91.4 384

98.9 432

113.7 480

145.6 528

218.4 576

389.4 624 https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 6/7

Air Gap Curve

Field

Current

Line -

Line Volt

0.0 0

14.6 288

17.0 336

19.4 384

21.9 432

24.3 480

26.7 528

29.2 576

31.6 624

34.0 672

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874

Reactive Capability Curve

Click to view Chart

Selected Model

Engine: C9 Generator Frame: LC5034L Genset Rating (kW): 300.0 Line Voltage: 480 Fuel: Diesel Generator Arrangement: 3381980 Genset Rating (kVA): 375.0 Phase Voltage: 277 Frequency: 60 Excitation Type: Permanent Magnet Pwr. Factor: 0.8 Rated Current: 451.1 Duty: STANDBY Connection: SERIES STAR Application: EPG Status: Current

Version: 41205 /40001 /40086 /7874 https://tmiwebclassic.cat.com/tmi/servlet/cat.edis.tmiweb.gui.GeneratorChartServlet?engineLimitYValues=0.8,0.8&rotorLimitXValues=0.669,0.725,0.77,0.806,0.834,0.853,0.864,0.868&statorLimitXValues=-0.04,-0.08,-0.12,-0.159,-0.199,-0.239,-0.279,-0.319,-0.359,-0.399&statorLimitYValues=0.999,0.997,0.993,0.987,0.98,0.971,0.96,0.948,0.933,0.917&stabilityLimitXValues=-0.297,-0.297,-0.463,-0.41,-0.399&stabilityLimitYValues=0,0.297,0.463,0.84,0.917&sizex=600&sizey=500

Stamp https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=openwindow&log=genXmlData&type=RNGenDataRefNum&refno=&selection=&unitType… 7/7

Caterpillar Confidential: Green

Content Owner: Commercial Processes Division Web Master(s): PSG Web Based Systems Support Current Date: 8/28/2018, 11:45:13 AM © Caterpillar Inc. 2018 All Rights Reserved.

Data Privacy Statement.

General Information

GENERATOR INFORMATION (DM7809)

Coastal Insulation Protection - System 4

1.Motor Starting Motor starting curves are obtained in accordance with IEC60034, and are displayed at 0.6 power factor.

2.Voltage Dip Prediction of the generator synchronous voltage dip can be made by consulting the plot for the voltage dip value that corresponds to the desired motor starting kVA value.

3.Definitions A)Generator Keys Frame: abbreviation of generator frame size Freq: frequency in hertz.

PP/SB: prime/standby duty respectively Volts: line - line terminal voltage kW: rating in electrical kilo watts Model: engine sales model

B)Generator Temperature Rise The indicated temperature rises are the IEC/NEMA limits for standby or prime power applications. The quoted rise figures are maximum limits only and are not necessarily indicative of the actual temperature rise of a given machine winding.

C)Centre of Gravity The specified centre of gravity is for the generator only. For single bearing, and two bearing close coupled generators, the center of gravi ty is measured from the generator/engine flywheel-housing interface an d from the centreline of the rotor shaft.

For two bearing, standalone generators, the center of gravity is measu red from the end of the rotor shaft and from the centerline of the rot or shaft.

D)Generator Current Decrement Curves The generator current decrement curve indicates the generator armature current arising from a symmetrical three-phase fault at the generator terminals. Generators equipped with AREP or PMG excitation systems wi ll sustain 300% of rated armature current for 10 seconds.

E)Generator Efficiency Curves The efficiency curve is displayed for the generator only under the giv en conditions of rating, voltage, frequency and power factor. This is not the overall generating set efficiency curve.

http://tmiwebclassic.cat.com/tmi/tmihome/PSGIS_support.htm javascript:void(0)

3.3 Engine Performance Data

�.$ &�!!� & $0� � � ��� ' � 1 �� � ����� �.$ &�!!� & �%&�#%$ $0� � ������ � ��� �#�� 2#� $%$0� .# � $0� � ������ 3��/ $ *�$ & $ �� (.)� %.!�� $0� � ��� $#&"! �!

'!1 & !& $0� � ���� $#&"! 2#� $%$0�

����+�.$ $0� � � ������ $#&"!�+�&' & �!� �� ��

$0� � �� � &$%.%��$%!

0 �&� �

3 �$!& $0� � �!� �%�$!

��� 4 &�$ � & . 5+ �$��/ �%�� $ & (% ��5 !� &�$%

�#�$&0 �#"% �#�$&0 ����%��$%!

1!� .# � (1.�)

5+ �.��

5+ �.��

1!� .�!*

5+ '�� 1!�

* $ 5+ '��

* $ 5+ 1!� .�!* &�$ (78 89:9� %

�&0 5+ 1!� (78 � ' . � 89:9� %

6 &�;��6<�� �

& 3 �$%!

$! 3��/ $

& 3 �$%!

& 3 �$%!

$! 5+

5+#��$ & �!1 &0 $! 7=�.

&'0

1��#

&'0

1��#

&'0

� ��$�>������? ����@6 8�A 8���

$%�� �%$ 1�&%�$%!

/* 7��:� 88=:� �=�:� B=:� 7�:� $ �!�� C ��� B= =� 8= ��

�!* & "+� ��� 7�� 8=7 ��9 �8:9 � �� ��/ 0�� ���1 �'&� ��

� �� ��/ 0�� ���1 0���� �% ��1 )�'�)� ���"

� �� �� 0���� �% ��1 )�'�)� � � �� &� 0���� �% ��1 )�'�)� ���" ����

#�� )� �� 0���� �% ��1 )�'�)� ���� ����

� �� ��/ 0�� ���1 0���� �% ��1 ##) � �� �� 0���� �% ��1 ##) � �� &� 0���� �% ��1 ##) ��

� �� ��/ 0�� ���1 �'&# &� ���" ���� ��

� �� ��/ 0�� ���1 ��'&� ���� ���

/* 7��:� 88=:� �=�:� B=:� 7�:� $ �!�� C ��� B= =� 8= ��

�!* & "+� ��� 7�� 8=7 ��9 �8:9 � �� ��/ 0�� ���1 �'&�

� �� ��/ 0�� ���1 0���� �% ��1 )�'�)� ��

� �� �� 0���� �% ��1 )�'�)�

� �� &� 0���� �% ��1 )�'�)� ��� #�� )� �� 0���� �% ��1 )�'�)� � �� ��/ 0�� ���1 0���� �% ��1 ##)

� �� �� 0���� �% ��1 ##) �� �� � �� &� 0���� �% ��1 ##) �� ��

� �� ��/ 0�� ���1 �'&# &� ���� ��"

� �� ��/ 0�� ���1 ��'&� ��

� ��$�>������? ����@6 8�A 8���

6��D %���� 6<��

�� $% & 7 8��= E 8��� �<6D !��� 0���� ����(1

�����D

6<��

$<��-�6

F �< <6@ E '-"/* E +& ��2 ��� ��3 � &�2 �� #)2

�0 �$�$%!

�&0 8��� E EEEE

�<6D !��� 0���� ����(1

�����D

6<��

$<��-�6

F �< <6@ E '-"/* E +& ��2 ��� ��3 � &�2 �� #)2

��6<6�G� ��� 6� �

��$%$#� �!&& �$ � �!* & ����"%�%$0 ("+�)

7� �� =� �� B� �� 9� ��� ��� �8� �7� ���

�� � !�� 0( 1

$�@6 �H�� ��66<�� ��<�� ��� ��� ��6 ��<����<�� ��G�� ��<����<�� ��G�� 1��@<��

�6 �6 ����6<�� ���<

�G ����6<�� ���<

�6�� &��������

�6��@ &�����������9���E��

�##���� ���2 �4+54, 6,7.-78*49, :-;,7*49, <*;=,> ?,;-@ *7, 7,67,>,4:*:5<, -. *

:A659*; 67-B=9:5-4 ,4+54, :,>:,B 54 * 9*;5?7*:,B BA4*8-8,:,7 :,>:

9,;; *: ��� � ��� >:*4B*7B 7,.,7,49, 9-4B5:5-4>� �*:,765;;*7 8*54:*54> ����

2�

9,7:5.5,B C=*;5:A 8*4*+,8,4: >A>:,8> .-7 ,4+54, :,>: (*95;5:5,> :- *>>=7, *99=7*:, 9*;5?7*:5-4 -. :,>:

,C=568,4:� �4+54, :,>: B*:* 5> 9-77,9:,B 54 *99-7B*49, @5:D ���

���� �BB5:5-4*; 7,.,7,49, 8*:,75*; ��� �

2�

�� �2 ���� ����� ����� *4B ���� 8*A *66;A 54 6*7: -7 *7, >585;*7 :- ��� � ���� �6,95*; ,4+54, 7*:54+ 7,C=,>:

0����1 :,>: B*:* >D*;; ?, 4-:,B� #��(��)���� #���)� �� �������� (�� ���2 #-@,7 �' �% -7C=, �' �%

�3D*=>: >:*9E :,86,7*:=7, �' �% �4;,: *57.;-@ �' �% �4:*E, 8*45.-;B 67,>>=7, +*+, �'

�3D*=>: .;-@ �' �% �6,95.59 .=,; 9-4>=86:5-4 �' �% (=,; 7*:, �' �% �6,95.59 ��( 9-4>=86:5-4 �' �% ��( 7*:, �' �% &,*: 7,F,9:5-4 �' �% &,*: 7,F,9:5-4 ,3D*=>: -4;A �'

&,*: 7,F,9:5-4 ��) -4;A �'

&,*: �,F,9:5-4 <*;=,> ?*>,B -4 =>54+ :7,*:,B @*:,7� -7C=, 5> 549;=B,B .-7 :7=9E *4B 54B=>:75*; *66;59*:5-4>� B- 4-:

=>, .-7 �,4 �,: -7 >:,*BA >:*:, *66;59*:5-4>�

�4 �" � � ,4+54,>� *: >6,,B> -.

�#) *4B =4B,7 :D,>, <*;=,> *7, 67-<5B,B .-7 7,.,7,49, -4;A� *4B 8*A 4-: 8,,: :D, :-;,7*49, ;5>:,B� D,>, <*;=,> B- 4-: *66;A :- ���

� (-7 :D,>, 8-B,;>� >,, :D, :-;,7*49,> ;5>:,B ?,;-@�

&�� ����� ��� �������� (�� ���2 &,*: 7,F,9:5-4 �'

&,*: 7,F,9:5-4 :- �:8->6D,7, �' � &,*: 7,F,9:5-4 :- �=?, �5; �' � &,*: 7,F,9:5-4 :- �.:,79--;,7 �' �%

�6,,B �' ,86,7*:=7, �' �� � B,+7,,> �4:*E, 8*45.-;B 67,>>=7, �' E#* �����G�� ������ #��(��)���� �� ������ �� � ��� �

� .-7 8*754, ,4+54,>� *4B � � .-7 -:D,7 ,4+54,>� 7,.,7,49, *:8->6D,759 67,>>=7, 5>

$#� 0���� 54 D+1� *4B >:*4B*7B :,86,7*:=7, 5> ��B,+ � 0"" B,+ (1 *: � % 7,;*:5<, D=85B5:A *: :D, >:*:,B *.:,79--;,7 @*:,7 :,86� -7 54;,: 8*45.-;B :,86�

�4+54, 7*:54+ -?:*54,B *4B 67,>,4:,B 54 *99-7B*49, @5:D ��� �

*4B ��� � � 7,.,7,49, *:8->6D,759 67,>>=7, 5>

$#� 0���� 54 D+1� *4B >:*4B*7B :,86,7*:=7, 5> ��B,+ � 0"" B,+ (1 % 7,;*:5<, D=85B5:A *4B ) *;:5:=B, *: :D, >:*:,B *.:,79--;,7 @*:,7 :,86,7*:=7,� �-9*:5-4 .-7 *57 :,86,7*:=7, 8,*>=7,8,4: *57 9;,*4,7 54;,: *:

>:*?5;5H,B -6,7*:54+ 9-4B5:5-4>�

5> -4;A =>,B .-7 :D, 9*;9=;*:5-4 -. �8-E, �6*95:A <*;=,> B5>6;*A,B 54 :D5> B*:*>,:� D5> <*;=, B-,> 4-: 4,9,>>*75;A 7,67,>,4: :D, *9:=*; >:*9E B5*8,:,7 -. :D, ,4+54, B=, :- :D, <*75,:A -. ,3D*=>:

>:*9E *B*6:,7 -6:5-4> *<*5;*?;,� �-4>=;: :D, 6759, ;5>:� ,4+54, -7B,7 -7 +,4,7*; B58,4>5-4 B7*@54+> .-7 :D, *9:=*; >:*9E B5*8,:,7 >5H, -7B,7,B -7 -6:5-4> *<*5;*?;,�

�,.,7,49, .=,; 5> I� B5>:5;;*:, B5,>,; @5:D * ���#� +7*<5:AJ

� ;-@,7 D,*:54+ <*;=, 5> ���"� $�'$� 0 � !'��1 @D,4 =>,B *:

�� B,+ � 0���� B,+ (1� @D,7, :D, B,4>5:A 5> ����� �'�5:,7 0"�

�?>'�*;1� �,.,7,49, 4*:=7*; +*> .=,; D*> * ;-@,7 D,*:54+ <*;=, -. ���"� $�'� 0� � � !'�! (:1� �-@ � ! 7*:54+> *7, ?*>,B -4 ���� $�'� 0�

� !'�! ( 1 ;-@,7 D,*:54+ <*;=, +*>� #7-6*4, 7*:54+> *7, ?*>,B -4 �"��� $�'� 0���

�4+54, 9-77,9:,B +7->> -=:6=: 549;=B,> :D, 6-@,7 7,C=57,B :- B75<, >:*4B*7B ,C=568,4:J ;=?, -5;� >9*<,4+, ;=?, -5;� .=,; :7*4>.,7� 9-88-4 7*5; .=,;� >,6*7*:, 9579=5: *.:,79--;,7 *4B F*9E,: @*:,7 6=86>� �4+54, 4,: 6-@,7 *<*5;*?;, .-7 :D, ,3:,74*; 0.;A@D,,;1 ;-*B 5> 9*;9=;*:,B ?A >=?:7*9:54+ :D, >=8 -. *=35;5*7A ;-*B .7-8 :D, 9-77,9:,B +7->> .;A@D,,; -=: 6=: 6-@,7� A659*; *=35;5*7A

;-*B> *7, 7*B5*:-7 9--;54+ .*4>� DAB7*=;59 6=86>� *57 9-867,>>-7>

*4B ?*::,7A 9D*7+54+ *;:,74*:-7>� (-7 5,7 � 7*:54+> *BB5:5-4*;

#*7*>5:59 ;->>,> @-=;B *;>- 549;=B, �4:*E,� *4B �3D*=>:

�,>:759:5-4>� �;:5:=B, 9*6*?5;5:A 5> :D, 8*358=8 *;:5:=B, *?-<, >,* ;,<,; *:

>:*4B*7B :,86,7*:=7, *4B >:*4B*7B 67,>>=7, *: @D59D :D, ,4+54, 9-=;B B,<,;-6 .=;; 7*:,B -=:6=: 6-@,7 -4 :D, 9=77,4: 6,7.-78*49, B*:* >,:� �:*4B*7B :,86,7*:=7, <*;=,> <,7>=> *;:5:=B, 9-=;B ?, >,,4 -4

�D,4 <5,@54+ :D, *;:5:=B, 9*6*?5;5:A 9D*7: :D, *8?5,4: :,86,7*:=7, 5> :D, 54;,: *57 :,86 *: :D, 9-867,>>-7 54;,:�

�4+54,> @5:D ���) )�!� *4B &�!� .=,; >A>:,8> -6,7*:54+ *:

9-4B5:5-4> *?-<, :D, B,.54,B *;:5:=B, 9*6*?5;5:A B,7*:, .-7 *:8->6D,759 67,>>=7, *4B :,86,7*:=7, 9-4B5:5-4> -=:>5B, :D, <*;=,> B,.54,B� >,, )�

),9D*459*; +-<,74-7 9-4:7-;;,B =45: 54F,9:-7 ,4+54,> 7,C=57, * >,::54+ 9D*4+, .-7 -6,7*:5-4 *: 9-4B5:5-4> *?-<, :D, *;:5:=B, B,.54,B -4 :D, ,4+54, 6,7.-78*49, >D,,:� �,, A-=7 �*:,765;;*7 :,9D459*; 7,67,>,4:*:5<, .-7 4-4 >:*4B*7B 7*:54+>�

�5:, G*75*:5-4K .-7 >:*4B*7B 7*:54+>� �-…