Appendix_A_-_Statement_of_Work.pdf

U.S. Department of State RFQ #: 191NLE-18-Q-0085

International Narcotics and Law Enforcement Affairs Mobile Custom-Made Kits

APPENDIX A – STATEMENT OF WORK

1.0 Overview

The Contractor shall provide mobile custom-made kits for high risk environmental clandestine laboratory equipment. The composition of each mobile custom-made kit is provided on pages 2.0 of this document. The Contractor shall provide new products as described in the specifications for the stated firm-fixed-price and deliver them to the locations(s) provided at the CLIN level.

1.1 Delivery

a) The Contractor shall provide a detailed Importation Plan, outlining their procedures and strategy for importing, transporting, and delivering all required items directly into

Mexico City. The Importation Plan must be provided no later than three days after receipt of contract award. For any optional quantities ordered, the Contractor shall follow these same procedures for the country that they are being shipped to.

b) A packing list or other suitable shipping document shall accompany each shipment and shall include (at a minimum) the following information:

a. Name and address of consignor

b. Name and address of consignee

c. Government contract number (and delivery order number, if used)

d. Government bill of lading number covering the shipment

e. Description of the items shipping, including item number, quantity, number of containers, and package number

c) The four (4) mobile custom-made kits must be delivered no later than 60 days after contract award. Partial shipments are not allowed unless an exception is issued by the

Contracting Officer. Note: some items may require special permits to be imported into

Mexico. This is solely the responsibility of the Contractor.

d) Packaging and preservation shall be in accordance with commercial best practices to enable shipment to the final destination in Mexico to the address specified herein without repackaging or incurring damage during shipment and handling.

e) The Contractor shall provide all required containers and crates. The Government will not return the shipping containers / crates.

f) If the shipment involves wood packaging material, then the packing and palletizing must conform to the standards in the International Standards for Phytosanitary Measures

Publication No. 15: “Guidelines for Regulating Wood Packaging Material in

International Trade” (ISPM 15) and have the appropriate markings indicating that the materials meet this standard. Any deliveries arriving at our indicated domestic delivery address that do not meet these standards shall be rejected and must be corrected at the contractor’s expense.

g) The Contractor shall comply with Sections 38-40 of the Arms Export Control Act

(AECA) (22 U.S.C. 2778-2780) and the International Traffic in Arms Regulations

(ITAR) (22 CFR Parts 120-130) as required, for the prosecution of work under this contract at no additional cost to the Government. Failure to be in compliance with AECA and ITAR by date planned for commencement of contract performance as well as during the entire performance of work under this contract may result in contract termination.

Any penalties rendered to the Contractor, as a direct result of being found non-compliance with AECA and ITAR, shall be the responsibility of the Contractor. For additional information on AECA and ITAR, see http://www.pmddtc.state.gov/.

h) The Contractor shall comply with license requirements of the Commerce Control List and any Export Administrative Regulations (EAR), which may apply.

i) The Contractor must provide/file all required shipping/export documentation and relevant permits/licenses or any other documentation necessary for the importation of the goods to

Mexico. Contractor is responsible to clear customs in Mexico, pay importation taxes in

Mexico and provide all required importation permits and paperwork in compliance with

Mexican regulations. End user is based in Mexico DF. No delivery shall take place until coordinated with INL Logistics.

Vendors are advised INL Mexico is not involved in the importation process, and cannot act as the importer or consignee. INL Mexico cannot sign any document related to the importation process. Therefore, it is the vendor’s sole responsibility to import the items to their final delivery locations.

The contractor must comply with all applicable International, U.S., and Mexican

Regulations. All shipping documents, export declaration forms, and other delivery information shall be submitted to:

INL Logistics Team

MexicoCityINLLogistics@state.gov

1.2 Warranty

Standard warranty must be provided and begin upon delivery and acceptance of equipment at the end users’ location. The warranty must be identical to that provided by the original manufacturer and must be valid in Mexico. A list must be included specifying the manufacturer warranty timelines for each product inside the kit that has a warranty applied.

1.3 Technical Manuals and Other Documentation

The Contractor shall provide all available manuals for each of the products. Instructions and manuals must be provided in Spanish, when available.

mailto:MexicoCityINLLogistics@state.gov

1.4 Close-Out Documentation

No later than 5 days after delivery of the equipment, the Contractor shall deliver a final status report with complete documentation for all items delivered under this contract, including but not limited to: warranty, manuals, and technical support contact information.

1.5 Data Deliverables and Reports

Required deliverables are summarized below:

Deliverable Due Date Frequency Distribution

D01: Technical/Data sheet of all imported products

Two weeks in advance of delivery of D03 to end user

Once

INL Program

Officer – To

Be Provided at

Award

D02: Equipment delivery

No later than 60 days after contract award

Once

To Be

Provided at

Award

D03: Closeout

Documentation

No later than 5 days after delivery D03 Once CO + COR

D04: Warranty

One year warranty effective upon delivery and acceptance of equipment at the end users’ locations.

Once CO + COR

2.0 Components of the Mobile Custom-Made Kits for High Risk Environmental

Clandestine Laboratory Equipment

QTY: 4

SPECS:

Each Mobile Custom-made Kit shall contain all equipment within two (2) Tricon Cargo

Containers. A total of eight (8) cargo containers totaling four (4) kits to be donated to four (4) Mexican end-users must be received. The containers must have the following requirements:

Containers shall include shelves constructed of water and UV resistant materials.

Containers should measure on its interior:

o Length: 6’ 3 25/64’’ Ft. in. 6 o Height: 7’5 9/64’’ Ft. in. 6 o Width: 7’ 5 17/32’’ Ft. in. 6 o With a door opening: 6’ 1 25/32’’ Ft. in. 6

Each Mobile Custom-made Kit shall provide equipment cases to contain and protect electronic equipment and other sensitive items during storage and transportation.

o Equipment Cases must be submersible and dust tight (MIL-C-4150J / IP67).

o Equipment Cases must be resistant to impact damage, corrosion, UV, solvents, and fungus (MIL-STD-810F).

o Equipment Cases must feature an automatic ambient pressure equalization valve

(MIL-STD-648C).

o Interior of equipment cases shall include routed or waterjet cut foam inserts featuring contoured pockets to fit each item within the case.

o Foam inserts shall be constructed of closed-cell cross linked polyethylene, 2.2# or

4# density.

Each Mobile Custom-made Kit shall provide overpack cases to group equipment cases of like items.

o Overpack cases shall be constructed of impact resistant, UV stabilized materials and must meet MIL-STD-810 and MIL-C-4150J specifications.

o Overpack cases shall be capable of being stacked three (3) high.

Each Mobile Custom-made Kit shall provide secure, modular storage for spare 60

Minute Self-Contained Breathing Apparatus (SCBA) cylinders.

o Each module shall be designed to store one (1) 60 Minute SCBA cylinder.

o Each module shall be constructed of non-conductive weather and UV resistant materials.

o Each module shall feature a high-strength, locking strap to retain the cylinder and self- centering interior to protect the cylinder from impact in any direction.

Each Mobile Custom-made Kit shall include a ramp to facilitate removal and storage of air compressor.

Each Mobile Custom-made Kit shall include materials required to secure all large items (i.e. air compressor), chemical protective suits, overpack cases, and equipment cases within the Tricon containers.

Each Mobile Custom-made Kit shall include load plan drawings showing the location of each item within each Tricon, overpack case, and/or equipment case.

MOBILE CUSTOM KIT PRODUCTS (BRAND NAME OR EQUAL)

The products required to be included in EACH Mobile Custom-made Kit, are listed below. The total quantities of the items listed below, should be multiplied by four for the entirety of this solution

Resolve: Standard Package o Part Number: 071-T009-001 o Quantity: 1 o Raman technology that detects through colored and opaque plastics, dark glass, paper, cardboard, sacks and fabrics o Keeps hazardous material contained - no need to open or disturb objects o Fast - accurate identification of chemicals and mixtures in 1 minute or less, with no sample preparation or consumables o Unique optical technology significantly reduces the risk of igniting sensitive explosives o Rugged - built to withstand tough user environments o User friendly - large buttons, simple interface, designed for use in protective gear o Flexible on-board libraries: Explosives and precursors, hazardous and toxic materials, chemical warfare agents, narcotics and new psychoactive substances

(NPS), household products, and less commonly-used chemicals. Plus, create and deploy your own libraries

Trellchem VPS-Flash - M o Part Number: SG116349 o Quantity: 6 o Meets NFPA 1991:2016 including optional chemical flash fire and liquefied gas protection o Fabric system consisting of a chloroprene/Nomex® outer and chloroprene/polymer laminate barrier inner provides 8hr + protection from a wide range of chemicals including warfare agents o Chemical flash fire and liquefied gas protection in a single suit without the need for a second over cover o TRELLCHEM® Bayonet glove ring system allows quick and easy glove change for multiple glove combinations o Aramid stitched seams for superior strength and durability

• Both inner and outer seams are sealed to provide a continuous barrier layer with the same level of chemical protection as the garment material itself o Antistatic, barrier against infective agents and radioactive particulates o Available in three different designs to fit all user preferences:

Encapsulating design* type CV

Encapsulating design* type VP1 (larger visor)

Non-encapsulating design** type T

* SCBA worn inside the suit. ** SCBA worn outside the suit.

o Aramid stitched seams for superior strength and durability

• Both inner and outer seams are sealed to provide a continuous barrier layer with the same level of chemical protection as the garment material itself o Rigid 2 mm impact and chemical resistant PVC Visor o Available in two sizes; CV or a larger field of view VP1 version, both of which are covered by a replaceable, antistatic Tear-off lens o Rubber face seal on non-encapsulating (type T) suits is anatomically designed for optimum safety and comfort o Mini hood provided with all Type T suits o Strong and durable, gas-tight chloroprene rubber coated zipper is standard o EN 943-2/ET certified suits are equipped with the TRELLCHEM® HCR zipper, which includes a barrier film for increased chemical resistance o Zipper closes top to bottom for added safety and is protected by a flap/splash guard o Standard built-in suit ventilation system adds safety due to a constant level of overpressure inside the suit o TRELLCHEM® Regulating valve has 3 ventilation rates (2, 30 and 100 l/min) plus zero/off position and is as an option also available in a passthrough version for use with external air supply o Ansell Barrier® inner glove and outer ChemTek™ #38-628 Viton®/Butyl rubber glove o NFPA 1991:2016 certified suits include the AlphaTec® Overglove, a cut-resistant aramid outer glove o TRELLCHEM® Bayonet glove ring system offers quick and simple glove exchange o Sewn-in socks/booties or attached Nitrile rubber safety boots with European approval as Firemen’s boots (not on suits certified to NFPA 1991:2016) o Boots are fixed with an ergonomically designed ring attachment, for simplified boot exchange

Trellchem VPS-Flash - L o Part Number: SG116346 o Quantity: 8 o Meets NFPA 1991:2016 including optional chemical flash fire and liquefied gas protection o Fabric system consisting of a chloroprene/Nomex® outer and chloroprene/polymer laminate barrier inner provides 8hr + protection from a wide range of chemicals including warfare agents o Chemical flash fire and liquefied gas protection in a single suit without the need for a second over cover o TRELLCHEM® Bayonet glove ring system allows quick and easy glove change for multiple glove combinations o Aramid stitched seams for superior strength and durability

• Both inner and outer seams are sealed to provide a continuous barrier layer with the same level of chemical protection as the garment material itself o Antistatic, barrier against infective agents and radioactive particulates o Available in three different designs to fit all user preferences:

Encapsulating design* type CV

Encapsulating design* type VP1 (larger visor)

Non-encapsulating design** type T

* SCBA worn inside the suit. ** SCBA worn outside the suit.

o Aramid stitched seams for superior strength and durability

• Both inner and outer seams are sealed to provide a continuous barrier layer with the same level of chemical protection as the garment material itself o Rigid 2 mm impact and chemical resistant PVC Visor o Available in two sizes; CV or a larger field of view VP1 version, both of which are covered by a replaceable, antistatic Tear-off lens o Rubber face seal on non-encapsulating (type T) suits is anatomically designed for optimum safety and comfort o Mini hood provided with all Type T suits o Strong and durable, gas-tight chloroprene rubber coated zipper is standard o EN 943-2/ET certified suits are equipped with the TRELLCHEM® HCR zipper, which includes a barrier film for increased chemical resistance o Zipper closes top to bottom for added safety and is protected by a flap/splash guard o Standard built-in suit ventilation system adds safety due to a constant level of overpressure inside the suit o TRELLCHEM® Regulating valve has 3 ventilation rates (2, 30 and 100 l/min) plus zero/off position and is as an option also available in a passthrough version for use with external air supply o Ansell Barrier® inner glove and outer ChemTek™ #38-628 Viton®/Butyl rubber glove o NFPA 1991:2016 certified suits include the AlphaTec® Overglove, a cut-resistant aramid outer glove o TRELLCHEM® Bayonet glove ring system offers quick and simple glove exchange o Sewn-in socks/booties or attached Nitrile rubber safety boots with European approval as Firemen’s boots (not on suits certified to NFPA 1991:2016) boot exchange

Trellchem VPS-Flash – XL (Extra Large) o Part Number: SG116354 o Quantity: 6 o Meets NFPA 1991:2016 including optional chemical flash fire and liquefied gas protection o Fabric system consisting of a chloroprene/Nomex® outer and chloroprene/polymer laminate barrier inner provides 8hr + protection from a wide range of chemicals including warfare agents o Chemical flash fire and liquefied gas protection in a single suit without the need for a second over cover o TRELLCHEM® Bayonet glove ring system allows quick and easy glove change for multiple glove combinations o Aramid stitched seams for superior strength and durability

• Both inner and outer seams are sealed to provide a continuous barrier layer with the same level of chemical protection as the garment material itself o Antistatic, barrier against infective agents and radioactive particulates o Available in three different designs to fit all user preferences:

Encapsulating design* type CV

Encapsulating design* type VP1 (larger visor)

Non-encapsulating design** type T

* SCBA worn inside the suit. ** SCBA worn outside the suit.

o Aramid stitched seams for superior strength and durability

• Both inner and outer seams are sealed to provide a continuous barrier layer with the same level of chemical protection as the garment material itself o Rigid 2 mm impact and chemical resistant PVC Visor o Available in two sizes; CV or a larger field of view VP1 version, both of which are covered by a replaceable, antistatic Tear-off lens o Rubber face seal on non-encapsulating (type T) suits is anatomically designed for optimum safety and comfort o Mini hood provided with all Type T suits o Strong and durable, gas-tight chloroprene rubber coated zipper is standard o EN 943-2/ET certified suits are equipped with the TRELLCHEM® HCR zipper, which includes a barrier film for increased chemical resistance o Zipper closes top to bottom for added safety and is protected by a flap/splash guard o Standard built-in suit ventilation system adds safety due to a constant level of overpressure inside the suit o TRELLCHEM® Regulating valve has 3 ventilation rates (2, 30 and 100 l/min) plus zero/off position and is as an option also available in a passthrough version for use with external air supply o Ansell Barrier® inner glove and outer ChemTek™ #38-628 Viton®/Butyl rubber glove o NFPA 1991:2016 certified suits include the AlphaTec® Overglove, a cut-resistant aramid outer glove o TRELLCHEM® Bayonet glove ring system offers quick and simple glove exchange o Sewn-in socks/booties or attached Nitrile rubber safety boots with European approval as Firemen’s boots (not on suits certified to NFPA 1991:2016) boot exchange.

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (M-S) o Part Number: HZ9420FVG-M-S-TAN o Quantity: 3 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which provides excellent static dissipative performance and resists melting, dripping, and burning when exposed to high heat and flame.

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (M-R) o Part Number: HZ9420FVG-M-R-TAN o Quantity: 3 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (L-S) o Part Number: HZ9420FVG-L-S-TAN o Quantity: 5 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (L-R) o Part Number: HZ9420FVG-L-R-TAN o Quantity: 5 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (L-T) o Part Number: HZ9420FVG-L-T-TAN o Quantity: 2 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (XL-S) o Part Number: HZ9420FVG-XL-S-TAN o Quantity: 2 o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (XL-R) o Part Number: HZ9420FVG-XL-R-TAN o Quantity: 2 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

Multi-threat NFPA 1994 - Front Zip Tan Avon Seal (XL-T) o Part Number: HZ9420FVG-XL-T-TAN o Quantity: 1 o Front Zip w/ Attached Gloves / Avon M53 Seal o Tan o Dual-certified protection for hot zone CBRN missions o Form-fitting design for superior mobility and confined space operations o NOMEX® IIIA laminate fabrics for limited FR protection o Approved for use with tactical-style boots o Tactical gloves for superior dexterity o Ensemble offers the highest level of protection in the Homeland Defender® line from liquid, vapor, and particulate forms of CBRN agents. The suit is made of

GORE® CHEMPAK® Ultra-barrier fabric and is certified to NFPA 1994 Class 2 and NFPA 1992 for protection against chemical warfare agents (CWA’s) and toxic industrial chemicals (TIC’s) at concentrations at or above IDLH when worn with approved SCBA systems. For added protection, the revolutionary non-permeable membrane is laminated to a 4.5 ounce NOMEX IIIA outer shell, which

7005 XL- N-Dex Nitrile Glove 9.5 In, 4 Mil, XL - 20 boxes per cs o Part Number: 7005XL o Quantity: 2 o Latex free 100% nitrile disposable gloves o N-DEX 7005 provides unmatched dexterity and performance across a range of tactical applications o Rolled cuff prevents dirt from entering the glove o Smooth grip o Uses SHOWA technology o Low-modulus formulation o 0,10mm (4 mil) thick o Length 240mm (9.5") o Lightly powdered o Light blue color o All sizes should comply with EN420:2003 for comfort fit and dexterity

TUBEHYDROCHLORIC ACID 0.2/A0.2-20 PPM

o Part Number: 8103481 o Quantity: 4 o Draeger Tubes used in testing for Hydrochloric Acid 0.2/a o Measuring Range: 0.2 - 20 ppm (10 Tests per Box) o Glass Vial 5.0 x 0.25 inch, 120 x 7 mm o Filled with a chemical reagent(s) o Air is pulled through with a hand operated or automatic pump o The reagents change color if the targeted chemical is present o Printed scale allows technicians to easily view the direct reading of the concentration o Calibration by the user is not necessary o The length-of-stain discoloration does not correspond to the concentration as a direct measure but is a measure of the mass reaction of the air contaminant.

o Draeger tubes are designed for on-the-spot measurements at a particular location over a relatively short time period. Draeger Tube measurements may last from 10 seconds to 15 minutes or so depending on the particular Draeger Tube and

Draeger Tube sampling pump.

TUBE AMINE TEST QUALITATIVE

o Part Number: 8101061 o Quantity: 4 o Draeger Tubes used in testing for Amine Test o Measuring Range: 0.2 - 20 ppm (10 Tests per Box) o Glass Vial 5.0 x 0.25 inch, 120 x 7 mm o Filled with a chemical reagent(s) o Air is pulled through with a hand operated or automatic pump o The reagents change color if the targeted chemical is present o Printed scale allows technicians to easily view the direct reading of the concentration o Calibration by the user is not necessary o The length-of-stain discoloration does not correspond to the concentration as a direct measure but is a measure of the mass reaction of the air contaminant.

o Draeger tubes are designed for on-the-spot measurements at a particular location over a relatively short time period. Draeger Tube measurements may last from 10 seconds to 15 minutes or so depending on the particular Draeger Tube and

Draeger Tube sampling pump.

TruDefender FTX-S1, Orange Boot.

o Includes 1 year warranty, 1 year support, and on-site training within continental

US. (4 hour course per instrument for up to 12 students) o Part Number: 800-00801-01 o Quantity: 1 o TruDefender FTX Handheld FTIR for Chemical Identification o Weight: 3.12 lbs o Height: 2.1 in o Length: 8.9 in o Width: 4.5 in o Spectral Range: 4,000 cm-1 to 650 cm-1 o Battery Type: Removable and rechargeable lithium ion battery or 123a (e.g.

SureFire) batteries; > 4 hours operation o Temperature (English) Operating: -4 ° to +104°F o Language Configurations: English, Chinese, German, Russian (Optional) o Collection Optics: Solid Diamond Crystal ATR o Survivability: Independently tested for MIL-STD-810G and IP67 certification

Electrostatic Decon Spray Kit o Includes Electrostatic Sprayer, pelican case, battery, charger, nozzle wrench, Dalhgren Decon 22oz ready to use, fibertect wipe 12x12 o Part Number: FR-EDK-1-DG o Quantity: 4 o The Electrostatic Decon Kit (EDK) combines top of the line technology from

Victory Innovations and First Line Technology to offer users the easiest, most efficient way to decontaminate threats.

o Stored in a military grade hardshell case from SKB Cases, the electrostatic spraying system can easily be charged while staying organized inside the case for rapid deployment when needed.

o MG200 Electrostatic Sprayer

Electrostatic spraying is the process of adding an electric charge to the liquid droplets when they are sprayed. The result is the decon solution will envelop and adhere to the target. As the charged droplets hit the surface they are forced to create an even spread, including hidden and shadowed areas.

o DAHLGREN DECON + FIBERTECT

Provides high efficacy decontamination products that can decontaminate chemical warfare agents, toxic industrial chemicals (TICs), toxic industrial materials

(TIMs), as well as biological and radiological agents from personnel, personal protective equipment (PPE), sensitive equipment, and critical infrastructure.

o Kit Includes: MG200 Electrostatic Sprayer, (x2) Dahlgren Decon, (x8) Fibertect

Cotton Wipes / Pads, 1000ml Reservoir, 8 hour extended battery, 110v Battery

Charger and Protective Pelican Case o Lightweight and Portable - 3.8lbs.

o Quiet — Suitable for use in any environment.

o Removable tank holds 38oz. of liquid.

o Charge on/off button.

Dahlgren Decon (DD) - 22 oz - Case of 4 RTU o Part Number: FRS-DD-022-04-RTU o Quantity: 8 o Provides high efficacy decontamination products that can decontaminate chemical warfare agents, toxic industrial chemicals (TICs), toxic industrial materials

(TIMs), as well as biological and radiological agents from personnel, personal protective equipment (PPE), sensitive equipment, and critical infrastructure.

o Dahlgren Decon neutralizes 100% of Fentanyl and Carfentanil in under five minutes.

NeverKink 5/8-in x 50-ft Premium Kink Free Vinyl Coiled Hose o Part Number: 605105 o Quantity: 5 o Triple frame construction for maximum durability and abrasion resistance o Patented anti-kink technology prevents kinks, twists and tangles o Industrial male and female leak proof and crush resistant couplings up to 1400 lbs force o Commercial duty strain relief prevents kinking at the faucet o All weather flexibility down to 45°F for ease of use in colder temperatures o MicroShield® anti-microbial protection guards hose against mold and mildew that can cause hose deterioration o Lifetime guarantee

5-Gallon Residential Bucket o Part Number: 211817 o Quantity: 8 o For indoor or outdoors use o Tapered design accommodates standard industry paint roller frames o Comes with metal handle with plastic grip o Made from HDPE resin

Karcher Wheel Rim Brush o Part Number: 2.642-186.0 o Quantity: 4 o Ergonomically shaped handle o The Karcher wheel rim brush works great a removing tough debris from spoke wheels and areas that are hard to clean o For Karcher electric pressure washers with bayonet connectors o Fits Karcher electric units up to 1850 PSI

Quickie - Professional Poly Fiber Soft General Wash Brush o Part Number: 1790 o Quantity: 2 o Accepts threaded flow-thru handles o Soft poly fibers o Clean windows, cars, SUVs, boats and other smooth surfaces where water will assist

Hardwood Handle for General Wash Brush o Part Number: 84171 o Quantity: 2 o Handle for parts cleaning brush with polypropylene bristles o Strong handle with durable polypropylene bristles will hold up under repeated use in cleaning solvents

Igloo 4101 - Beverage Cooler, Insulated, 10 Gallons o Part Number: 4101 o Quantity: 2 o Capacity_Volume - 10 gal o Materials – Plastic o Colors - Yellow/Red o Diameter - 16" o Height - 23 1/2" o 4101 Cap. Vol.: 10gal (part# 4101) 10 Gal. Industrial Water Cooler 2 Gal.

Industrial Water Cooler 3 Gal. Industrial Water Cooler 5 Gal. Industrial Water

Cooler This item features: -HDPE hide won't chip, peel, buckle, or rust. -

Ultratherm insulation for maximum cold retention. -UV stabilizers prevent fading, cracking in all exposures. -White FDA Grade liner is easy to clean and resists stains and odors. -Wide mouth pressure fit lid for easy filling. -Keeper cord prevents lid loss. -Color: Red, Yellow. -Material: Plastic. -Type: Insulated Water

Cooler. Testing and approvals: -OSHA.

o Improved, heavy-duty side handles mounted with stainless steel screws into ABS plastic back-up plate. Cup dispenser bracket. Plastic, recessed, drip-proof, pushbutton spigot. Wide mouth, pressure fit lid has molded-in contour handle and keeper cord. Safety color for easy identification, will not fade in direct sunlight.

All plastic, rustproof construction. Sanitary white liner. Foamed-in-place

Ultratherm insulation. Drinking Water imprint meets OSHA requirements.

Igloo 421 Industrial Water Cooler44; 2 gallon o Part Number: 421 o Quantity: 2 o HDPE hide won"t chip, peel, buckle, or rust.

o Ultratherm insulation for maximum cold retention.

o UV stabilizers prevent fading, cracking in all exposures.

o White FDA Grade liner is easy to clean and resists stains and odors.

o Wide mouth pressure fit lid for easy filling.

o Features. HDPE hide wont chip peel buckle or rust.. Ultratherm insulation for maximum cold retention.. UV stabilizers prevent fading cracking in all exposures.. White FDA Grade liner is easy to clean and resists stains and odors..

Wide mouth pressure fit lid for easy filling.. Keeper cord prevents lid loss..

Capacity - 2 gallon. Material - Plastic. Color - YellowRed. Opening Type -

Pressure-Fit Lid Spigot.

Camelbak Hi-viz Hydration Pack, Orange - 62598 o Part Number: 62598 o Quantity: 16 o Delivery system for an Operator's water supply and provides maximum adaptability for changing missions or combat environments. Includes the quick link exit Port and ql hydrolock o Bite valve adapter: tube clicks off for faster refilling with auto shut-off; new fill

Port: opening with air-light 1/4 turn open/close for quick, secure seal that can't be over-tightened; lighter-weight, lower-profile design

Knucklehead HAZ-LO Flood - Alkaline Orange - Blister o Part Number: 91644 o Quantity: 16 o Lightweight, hand-held work light with a 210-degree articulating head that rotates a full 360-degrees. This light with a strong magnet, the latest in C4 power LED technology, microprocessor controlled high and low intensity modes, emergency flash and moonlight mode o The removable magnet with 135-pound pull strength features a replaceable rubber boot o Product Dimensions: 9.20-inch height; 2.85-inch width; 2.75-inch thickness (at magnet) o Product Weight: 23.1-ounces o The Streamlight Knucklehead HAZ-LO Flood Light features two C4 LEDs, impervious to shock with a 50,000-hour lifetime. Optimized electronics provide regulated intensity. Dual wide pattern parabolic reflectors inset into larger textured reflector provide a smooth flood pattern for close-up task work.

o High for a soft flood beam; Low for when less light is ideal & longer run times;

Moonlight for low-level lighting & extended run times (runs 20 days); Flash for signaling (runs 8-hours) o Housing made from high impact nylon, offering exceptional durability. All openings are O-ring sealed. Unbreakable polycarbonate lens with silicone anti-scratch coating in a heavy-duty bezel. Circular rare-earth magnet surrounded by durable nickel-plated steel housing. One-way valve for case venting. 2-Meter impact-resistance tested. IPX4 water-resistant o Powered by four AA alkaline batteries.

Durston Manufacturing Co WS55 Heavy Duty Work Shear with Belt Loop Sheath o Part Number: B0021V0EM0 o Quantity: 16 o Heavy stainless steel blades and two component non slip handles. It is great for cutting everything from paper to battery cable and the heat treated stainless steel blades with non slip serrations helps to keep the material from slipping as well as is backed by a lifetime warranty o Item Weight: 1 lb o Product dimensions: 7.3x5.8x1.1 in

4oz (120ml) Natural HDPE Wide Mouth Lab Style Bottle with 38-415 Natural PP

Linerless Cap enclosed Case of 500 o Part Number: PLA 03171 o Quantity: 1 o Style: Wide Mouth Lab Style Bottle o Size: 51 x 96mm o Color: Natural o Material: HDPE o Attached Cap: Natural Polypropylene Linerless Cap enclosed o Capacity / Volume: 4oz (120ml) o Neck Finish: 38-415

Vial,6dram,22mL,Borosilicate Glass,PK144 o Part Number: GLC-01002 o Quantity: 2 o Item: Vial o Height: 85mm o Dia.: 23mm o Neck Size: 20-400 o Closure Lining: F217/PTFe o Closure Material: Thermoset o Material of Construction: Borosilicate Glass o Capacity: 6 dram o Color: clear

Disposable plastic Transfer Pippettes Xlong, 23ml Capacity, 100 per package o Part Number: 52JX81 o Quantity: 4 o Length: 300MM, non-sterile, extra long

Anchor Brand 101-1212 MT1212 12'X12' POLYETHYLENE TARP WOVEN

REINFORCE

o Part Number: 101-1212 o Quantity: 2 o Multiple Use Tarpaulin, Polyethylene o Features: Sun and fade resistant | Rot and rust proof | Reinforced hem | Heat sealed seams | Grommets every three feet o Color : Blue o Length : 12 ft o Material : Polyethylene o Thickness : 5 mm o Width : 12 ft o Wt. : 2.65 lb

Traffic ConesTraffic Cone 28in, Wide 2 Refl Collars o Part Number: 28inconereflective o Quantity: 12 o High density, black base creates low center of gravity for maximum stabilization o All vinyl construction assures durability and flexibility in all weather conditions o Ultraviolet stabilized color provides maximum resistance to fading o Wide body design o Engineered to meet MUTCD specifications o Meets NCHRP-350 category requirements o 28" cone o 6" upper collar, 4" lower collar o 7 lbs.

o Vinyl Traffic Cone o Orange w/Black Base o 2 reflective collars: 6" upper, 4" lower o Brilliant fluorescent color provides high visibility protection

Shelter C100, with 110 pump o Part Number: 7500 o Quantity: 1 o Choice of color o SUV Connection o Roll-Up Mandoor with Connector Door o Windows with Covers o Radiant Barrier Insulation o Utility Ducts, Vent Screens, Removable Floor o Ground anchor attachment points o Standard 110v inflator/deflator and 12V DC inflator o Exhaust Hose with Clamp o Carry bag and Maintenance Kit o Minimum personnel required to set-up tent - ONE (1) o Designed for Emergency Use o Rapid Inflation o Full Interoperability o Easy to re-position after deployment o Easy to set-up in any weather condition o PRE-ASSEMBLED o SUV Connection can be closed off for use as stand-alone shelter o Shelter deploys in under 2 minutes o Storage Dimensions: 24" x 24" x 30" o Length 10’ o Width (internal) 10’ o Width (external) 11’ 4” o Height (internal) 8’ o Floor Area 100 Sq.Ft o Weight 96 Lbs o Stored Size 24” x 24” x 30” o Anchor Points 8 o Set-up Time / Blower 120 Seconds o Set-up Time / Airbottle 60-90 Seconds o Wind Resistance 60 Mph

Universal Pressure Tester o Part Number: 99081000000001UV o Quantity: 2 o DuPont™ 99081000000001UV Pressure Test Kit, Universal, For Use With

Auer® and Pirelli® Valves o Compact and light weight o Completely self-contained o Does not require an external air supply o APPLICATION : For periodic air pressure testing on all level A fully encapsulating suits

Folding Card Table (60x30) o Part Number: 6167T35 o Quantity: 2 o Measuring 38x38,” at 29.5,” height.

o Wheelchair accessible o Vinyl upholstery o Commercial grade 18-guage steel is heavy-duty, durable and finished with a powder coat.

Folding Plastic Chair, White 800lb o Part Number: LE-L-3-WHITE-GG o Quantity: 8 o Plastic Folding Chair o 800 lb. Weight Capacity o Lightweight Design o White Plastic Seat and Back o Contoured Back and Seat o Textured Seat ensures safe seating o Seat Drain Holes assist in drying o Double Support Rails o 18 Gauge Steel Frame o White Powder Coated Frame Finish

Large 55 (or there about) gallon trash cans o Part Number: 4011T71 o Quantity: 2

Wipes Anti Fog - 10 Pack o Part Number: 104.172.01 o Quantity: 40 o Formulated to apply evenly and transparently to today’s modern glasses, goggles, helmet face & eye shields, SCBA mask, etc. It also improves scratch resistance properties.

Folding Saw Horses o Part Number: 8055T29

Mesh GOPACK 4 Cooling vest, 2 extension sets, 1 Carry Bag o Part Number: DC-30480W-TBB o Quantity: 4 o Conveniently grab and go with a PhaseCore Go-Pack that combines an insulated

Transport Bag with ice packs and four personal cooling vests. Go-Packs can keep four vests fully charged for a complete 8-hour work shift in 95ᵒF (35ᵒC) heat

FiberTect Dry Decon Mitt (Size L ) Poly – Case of 10 o Part Number: FRS-FBT-10-L-10 o Quantity: 10 o FiberTect is a patented technology (US7,516,525). The Fibertect Mitt is a three-layer, inert, flexible,drapable, nonwoven composite substrate for absorbing and adsorbing CWAs and TICs. The Mitt design allows for easy clean-up of bulk chemicals on people, weapons, and sensitive equipment and can be worn over gloves. The three layers of material consist of a top and bottom fabric with a center layer of fibrous activated carbon that is needle punched into a composite fabric.

The top and bottom layers provide structural coherence, mechanical strength and abrasion resistance. The Fibertect Mitt is non-particulate, devoid of loose particles, and effective in decontaminating sensitive parts of military equipment.

o Can be used over gloves.

Sheet Plastic W - 23', L - 100', .004 Mill o Part Number: 8553K117 o Quantity: 3

Industrial Hand Towel - 13X12, 50 per bag, can be washed and reused 5 times o Part Number: 70585T1 o Quantity: 10

Bauer Model DMT08-GS/ELITE three stage o Part Number: DMT08-GS/ELITE o Quantity: 1 o Air cooled, pressure lubrication high pressure compressor o Maximum working pressure: 5000 psi o Application working pressure: To be advised o Charging Rate: 8.4 SCFM o Tolerance on capacity +/- 5%.

o Air purification: P31 (11,760 cu ft before cartridge changeout is required) o Interstage pressure guages Automatic condensate drain system Electric Start

(Engine Drive) Fill assembly: BFFD-347 Configuration: Dive Mate o Gasoline engine o Inlet filter o Stainless steel intercoolers and aftercooler o High temperature switch (except D drive) o Vibration isolators o P31 Purification o Low oil pressure switch (electric and engine drive with electric start) o Pressure switch o Visual CO/moisture indicator o Interstage gauges o Automatic condensate drain o Dimensions: 43 x 24 x 27 (1092 x 609 x 686) o WEIGHT pounds (kg): 300-400 (136-181) o Charging rate: 8.4 SCFM, 238 L/MIN o Number of stages: 3 o Motor: 9 HP, 6.7 kW o FAD2: 7 o RPM: 1250 o Purification system: P31.

Bauer Basic fill panel with six (6) fill positions w/ HOS-0127 o Part Number: BFP-6

Bauer WHEEL KIT & LIFT HANDLES o Part Number: WHEEL KIT & LIFT HANDLES

4-Gas Kitting Solution o Part Number: FRKITSMALL o Quantity: 1 o SKB case that holds MSA calibration units for MSA gas detectors.

o Chargers are built into the case.

o Includes custom cut foam to hold and protect these devices and accessories.

CYL. ASSY, G1, RC, 4500 PSIG, 60MIN,PKG

o Part Number: 10156426-SP o Quantity: 24 o MSA G1 SCBA Cylinders for Remote Connection o Connection Type: Remote o Standard on all MSA Air Masks o Option to be used with the Quick Connect Cylinder Adapter o Product dimensions: 10.6 x 2.7 x 2.5 inches o G1 SCBA ergonomics o Central power system for all electronics o Integrated technology for future expansion

Facepiece, G1, FS, MD, MD NC, 4PT C-HARN o Part Number: 10156459 o Quantity: 12 o Equipped with a Mechanical speech diaphragm that enhances speech communication o Provides breathable air from the Regulator past an inhalation valve to the inside of the lens (to minimize lens fogging) o Face seal provides a snug, comfortable fit, and tight seal o Facepiece, G1, Fire Service , Medium, Medium Nose Cup, 4 Point Adjustable

Head Harness, fixed push to connect o Product dimensions: 0.1 x 0.1 x 0.1 inches o Weight: 1.8 pounds o Type: Fire service o ATO Configuration: G1FP-F-M-1-M-4-0-1 o Head harness: Nose cup with 4-pt adjustable o The G1 Facepiece was designed without electronic components, to minimize weight, reduce your stress and fatigue and improve your overall performance level. This design also means that there are no electronic components on the outside of the facepiece that may result in snag and entanglement hazards.

o Open port design allows for lower breathing resistance both on and off air with the goal of reducing fatigue.

o Enable short-range communication with mechanical speaking diaphragm.

o G1 Facepiece, medium, 4-pt. Kevlar head harness

Facepiece, G1, FS, SM, SM NC, 4PT C-HARN o Part Number: 10156458 o Quantity: 2 o Equipped with a Mechanical speech diaphragm that enhances speech communication o Provides breathable air from the Regulator past an inhalation valve to the inside of the lens (to minimize lens fogging) o Face seal provides a snug, comfortable fit, and tight seal o Facepiece, G1, Fire Service, Small, Small Nose Cup, 4 Point Adjustable Head

Harness, fixed push to connect o Product dimensions: 0.1 x 0.1 x 0.1 inches o Weight: 1.8 pounds o Type: Fire service o ATO Configuration: G1FP-F-S-1-S-4-0-1 o Head harness: Nose cup with 4-pt adjustable o The G1 Facepiece was designed without electronic components, to minimize weight, reduce your stress and fatigue and improve your overall performance level. This design also means that there are no electronic components on the outside of the facepiece that may result in snag and entanglement hazards.

o Open port design allows for lower breathing resistance both on and off air with the goal of reducing fatigue.

o G1 Facepiece, small, 4-pt. Kevlar head harness.

Facepiece, G1, FS, LG, LG NC, 4PT C-HARN o Part Number: 10156460 o Quantity: 2 o Equipped with a Mechanical speech diaphragm that enhances speech communication o Provides breathable air from the Regulator past an inhalation valve to the inside of the lens (to minimize lens fogging) o Face seal provides a snug, comfortable fit, and tight seal o Facepiece, G1, Fire Service , Large, Large Nose Cup, 4 Point Adjustable Head

Harness o Product dimensions: 0.1 x 0.1 x 0.1 inches o Weight: 1.8 pounds o Type: Fire service o ATO Configuration: G1FP-F-L-1-L-4-0-1 o Head harness: Nose cup with 4-pt adjustable o The G1 Facepiece was designed without electronic components, to minimize weight, reduce your stress and fatigue and improve your overall performance level. This design also means that there are no electronic components on the outside of the facepiece that may result in snag and entanglement hazards.

o Open port design allows for lower breathing resistance both on and off air with the goal of reducing fatigue.

o G1 Facepiece, large, 4-pt. Kevlar head harness

ADAPTER, QUICK CONNECT, 4500/5500

o Part Number: 10149702-SP o Quantity: 24 o Product Dimensions: 5.1 x 2.5 x 5.1 cm ; 17.4 Kg o Quick-connect adapter for 4500/5500 psig cylinders

KIT, CHARGING STATION, G1

o Part Number: 10158385 o Quantity: 2 o GTIN: 641817103098 o The portable and compact rapid charger can charge up to six batteries at once and batteries can reach a full charge in just 6 hours.

Kit, Filter Adapter Assy, G1 Facepiece o Part Number: 10144231-SP o Quantity: 12 o Adaptor, For Use With G1 SCBA

Cartridge Assembly, Rd40 Threat, GMEP100 o Part Number: 10160594 o Quantity: 200 o Rd40 Thread o G1 Air Purifying Respirator o Full Facepiece

Battery Pack, G1, Alkaline o Part Number: 10148740-SP o Quantity: 2 o Single source powers the entire scba o Light weight rechargeable battery option o No need for multiple battery sizes in multiple locations o Reduced cost of ownership o Rapid charging with available smart charger

Battery Pack, G1, Rechargeable o Part Number: 10148741-SP o Quantity: 2 o MSA G1 Rechargeable Battery (Charger not included) o Product Dimensions: 7.5 x 2.7 x 1.5 inches ; 10.9 ounces

MULTIGAS DETECTOR, ALTAIR 5X, CONFIGURED

o Part Number: ALT5X-DLK0210T010 o Quantity: 4 o Exclusive InstantAlert™ allows user to manually activate an audible alarm to alert those nearby to potential emergency situations o Large display and buttons assure easy operation o XCell®Sensors deliver 4 year sensor life and end of sensor life warning o MotionAlert™ activates a “man down” alarm if no motion is detected for 30 seconds o Durable, rubberized housing offers a secure, confident grip o Reliable pump delivers consistent flow o Equipped with datalogging, rechargeable battery pack, charger, calibration cup, and tubing o Measures 6.69" x 3.49" x 1.79" and weighs 16 oz.

o Battery provides a 20 hour battery life o Features visual, audible, and vibrating alarms o Pump is internal o INSTRUMENT TYPE = COLOR DISPLAY AND PID o SENSOR #1 = LEL 0-100% (PENTANE) o SENSOR #2 = OXYGEN 0-30% o SENSOR #3 = NONE o SENSOR #4 = CO 0-1999 PPM o ADVANCED SENSOR = PID 10.6ev 0-2,000 PPM o PACKAGING = STANDARD CARTON o APPROVAL LABEL = UL ONLY w/Global power Supply o LOGO EXPRESS = NONE o SAMPLING PROBE KIT = SAMPLING PROBE KIT NON-REACT o CUSTOM FEATURES = NONE

GALAXYGX2,ALTAIR5/5X, CHRG, 4VALVE,NA

o Part Number: 10128627 o Quantity: 1 o Item Weight: 6.31 lbs o Length: 8.74 inches o Color touch screen for ease of setup and viewing o Extremely simple to use; testing starts automatically without touching a single button o Simultaneous testing of up to ten instruments o GALAXY GX2 System is optimized for use with…