Attachment_2_-_Final_Product_Specs.pdf

FOREST SERVICE

ASPEN BUNK HOUSE

Product Cut Sheets/ Specifications

Brand name/make/model or Approved Equal

Government Furnished Materials Noted - for

Contractor information only

Or approved equal cthrush Highlight

DECORATIVE

RETRO ROUNDS™

GLAZED PORCELAIN MOSAICS

Or approved Equal

DECORATIVE

RETRO ROUNDS™

GLAZED PORCELAIN MOSAICS

SOLID MOSAICS

BOLD WHITE GLOSS RR01 CREAM SODA RR05BOLD WHITE MATTE RR02 SADDLE BROWN RR06

POLKA DOT GLOSS RR03

DENIM BLUE RR10

POLKA DOT MATTE RR04

COBALT CIRCLE RR11 SMOKY GRAY RR12

DAFFODIL YELLOW RR07

ENGINE GRAY RR13

ORANGE SODA RR08

CANVAS BLACK GLOSS RR14

CHERRY RED RR09

CANVAS BLACK MATTE RR15

PATTERN MOSAICS

Or approved equal

WirthCad Highlight

SIZES

Thickness Sq. Ft.

per Carton

Pieces per Carton

1 x 1 Penny Round Mosaic Solids (Mesh-mounted on a 12 x 12 sheet)

(12-7/16" x 11-9/16" Sheet) (31.60 cm x 29.40 cm Sheet)

3/16" 10.00 10

1 x 1 Penny Round Mosaic Patterns (Mesh-mounted on a 13 x 12 sheet)

(13-1/4" x 11-9/16" Sheet) (33.60 cm x 29.40 cm Sheet)

3/16" 10.63 10

INSTALLATION

Grout Joint Recommendation Shade Variation

Approximately 1/8" Solids

Patterns

Low (V1)

Random (V4)

TEST RESULTS

ASTM# Result

Water Absorption C373 < 0.5%

Breaking Strength C648 > 250 lbs.

Scratch Hardness MOHS 4.0

Chemical Resistance C650 Resistant

NOTES

Manufacturer Advisory: These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.

Strong random shading enhances the natural beauty of this product.

To achieve optimal results, tile should be selected from multiple cartons and shading arrangement planned prior to installation.

Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

For additional information refer to “Factors to Consider” at daltile.com/Factors.

FLOOR APPLICATIONS

Target DCOF wet Suitable

Dry & Level – Interior N/A *

Wet & Level – Interior ≥ 0.42

Exterior Applications;

Pool Decking & Other Wet Areas with Minimal Footwear

≥ 0.60

Ramps & Inclines ≥ 0.65

A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

OTHER APPLICATIONS

Suitable

Walls/Backsplashes

Countertops **

Pool Linings

APPLICATION NOTES:

*Only matte colors suitable for residential and light commercial floors not subject to outside foot traffic

**Darker colors may show scratches. Only matte colors recommended for counter use.

Suitable for exterior wall applications in freezing and non-freezing climates when proper installation methods are followed.

DECORATIVE

RETRO ROUNDS™

GLAZED PORCELAIN MOSAICS

7834 C. F. Hawn Freeway, Dallas, Texas 75217 | 1.800.933.TILE

To view the complete collection of Daltile® products and information, visit our website at daltile.com.

DESIGNED TO HELP EARN LEED™

CREDITS. For more detailed information, visit daltilegreenworks.com. ©2016 Daltile (11/16)

SCAN QR CODE

FOR PRODUCT

INFORMATION

Get a QR Code reader at:

GET.DALTILE.COM

Generated by BeQRious.com

Or approved equal

WirthCad Highlight

GLAZED CERAMIC

PRE-CONSUMER

RECYCLED MATERIALS

MADE IN THE U.S.A.

All or select items within this series meet the requirements for these qualifications.

NATURAL HH01

GREIGE HH02

DARK BROWN HH04

TEAK HH03

HILL HOUSE™ – GLAZED CERAMIC

SIZES

Thickness Sq. Ft./ Carton

Pieces/ Carton

6 x 36 Floor Tile

(5-7/8" x 35-7/16") (15.00 cm x 90.00 cm) 5/16" 13.05 9

APPLICATIONS

Target DCOF wet

Suitable

Dry & Level – Interior Floor N/A

Wet & Level – Interior Floor ≥ 0.42

Shower Floors (Residential or Light Commercial)

≥ 0.42

Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)

≥ 0.60

Ramps & Inclines ≥ 0.65

Walls/Backsplashes N/A

Countertops N/A

Pool Linings N/A

A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

APPLICATION NOTES:

Suitable for exterior applications in non-freezing climates, when proper installation methods are followed.

INSTALLATION

Grout Joint Recommendation Shade Variation

3/16" (Overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.)

High (V3)

PERFORMANCE CHARACTERISTICS

ASTM# Result

Water Absorption C373 < 7.0%

Breaking Strength C648 > 250 lbs

Scratch Hardness MOHS 8.0

Chemical Resistance C650 Resistant

Abrasion Resistance C1027 3

For additional information on test results, visit us at:

daltile.com/information/TestResults.

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation.

Manufactured in accordance with ANSI A137.1 standards.

Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

For additional information refer to “Factors to Consider” at:

daltile.com/Factors.

Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.

Use of a latex modified thin-set is recommended for installation.

For more information, visit daltile.com.

7834 C. F. Hawn Freeway | Dallas, Texas 75217

Or approved equal

Or Approved Equal

WirthCad Highlight cthrush Highlight

Or approved equal cthrush Highlight

GOVERNMENT FURNISHED MATERIALS

GOVERNMENT FURNISH MATERIALS

Above ADA Compliant Sink

Features

• Vitreous china.

• Two-piece toilet.

• Comfort Height® Elongated bowl.

• Dual Flush flushing system.

• Includes top-mount dual flush trip lever.

• 1.6 gpf (6.0 lpf) or 1.0 gpf (3.8 lpf).

• Fully skirted trapway.

• Patented ReadyLock™ installation system.

• 12" (305 mm) rough-in.

• Supply line included.

• Seat not included.

• 4-1/2" (114 mm) x 5-3/4" (146 mm) water area.

• 28-5/8" (727 mm) x 14-3/16" (360 mm) x 32-1/2" (826 mm).

• Coordinates with other products in the Persuade Curv collection.

• Floor mount / Floor outlet.

Recommended Accessories K-4636 Cachet® Quiet-Close™ Elongated Toilet Seat Codes/Standards

ASME A112.19.2/CSA B45.1K-5588 Purefresh® Elongated Toilet Seat

ASME A112.19.14

Components Product includes:

K-4326 Skirted Trapway Bowl K-3569 Toilet Tank Additional included component/s: Tank cover, Dual flush push buttons, ReadyLock™ installation system, and Tank accessory pack.

DOE - Energy Policy Act 1992 EPA WaterSense®

California Energy Commission (CEC)

KOHLER® One-Year Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

Biscuit96

Almond47

DuneNY

Ice™ Grey95

Black Black™7

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

12-3-2017 03:34

Persuade® Curv Dual Flush Toilet

K-6355

OR APPROVED EQUAL

http://www.kohler.com

Finished Floor

NotesTechnical Information Install this product according to the installation instructions.

All product dimensions are nominal.

Two-piece, Floor-mountToilet type:

The rough-in must be 12" (305 mm) or more from the base of the wall or baseboard. Install orFloorWaste Outlet:

Elongated frontBowl shape: relocate the supply and outlet as necessary to conform to rough-in dimensions.2" (51 mm)Trap passageway:

Water Consumption If this toilet is installed in new construction, install a new supply stop following the dimensions in the diagram.

1.6 gpf (6 lpf)Full:

1 gpf (3.8 lpf)Reduced:

4-1/2" x 5-3/4" (114 mm x 146 mm)Water surface size: In installations with the supply stop installed, the existing supply stop may need to be relocated if8-1/2" (216 mm)Rim to water surface:

it is less than 8-1/2" (216 mm) from the centerline12" (305 mm)Rough-in:

of the toilet. Dry fit the toilet to confirm if the supply stop needs to be relocated.

5-1/2" (140 mm)Seat-mounting holes:

The supplied hose will extend roughly 6" (152

mm) from the toilet. If the supplied hose does not reach the supply stop, a longer supply hose may be used.

For back-to-back toilet installations: Use only a 45° double wye fitting.

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

12-3-2017 03:34

Persuade® Curv Dual Flush Toilet

K-6355 http://www.kohler.com

• Modular design allows it to be moved around corners and through doorways with ease.

• Durable high gloss finish.

• Convenient shelves provide generous storage space.

• Geometric back wall design adds visual interest.

• 60" (1524 mm) x 36" (914 mm) x 75-3/4" (1926 mm) complete unit finished dimensions.

Material

• Compression molded from our exclusive Vikrell® material.

Installation

• Four-piece modular design with pivot "snap together" installation.

• Caulk-free installation.

Components Product includes:

72245100 36" Shower End Wall Set 72271100 60" Shower Base 72272100 60” Shower Back Wall

Codes/Standards

CSA B45.5/IAPMO Z124

ASTM E162

ASTM E662

Greenguard UL 2818 - Gold HUD, UM Bulletin 73

Warranty – Bathing Fixtures (and) Kitchen and Utility Sinks Made of Solid Vikrell® Material See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

KOHLER Biscuit96

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:06

Accord®

60" Shower 72270100

Or Approved Equal http://www.sterlingplumbing.com

60"

Install this product according to the installation instructions.

All product dimensions are nominal.

3-Wall AlcoveInstallation:

Studs should be positioned roughly as shown.CenterDrain location:

Double studding is recommended for pivot shower door installations.

3-1/4" (83 mm)Minimum flat for door:

3-1/2" (89 mm)Threshold height:

Base cannot be installed without the wall surround.

72" (1829 mm)Door height required:

56-5/8" (1438 mm)Door width required:

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:06

Accord®

60" Shower 72270100 http://www.sterlingplumbing.com

• Modular design allows it to be moved around corners and through doorways with ease.

• Durable high gloss finish.

• Convenient shelves provide generous storage space.

• Geometric back wall design adds visual interest.

• Includes removable seat that can be placed on either side of the shower.

• 60" (1219 mm) x 36" (914 mm) x 74-3/4" (1898 mm) complete unit finished dimensions.

Material

• Compression molded from our exclusive Vikrell® material.

Installation

• Four-piece modular design with pivot "snap together" installation.

• Caulk-free installation.

Components Product includes:

72291100 60" Seated Shower Base 71164100 60" x 36" Bath/Shower Wall Set 72286104 Removable Seat

Codes/Standards Greenguard UL 2818 - Gold HUD, UM Bulletin 73

Warranty – Bathing Fixtures (and) Kitchen and Utility Sinks Made of Solid Vikrell® Material STERLING® Warranty - Bathing & Showering Seats See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

KOHLER Biscuit96

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:08

Accord®

60" Seated Shower 72290100

Or Approved Equal

THIS ITEM IS DELETED - INCLUDED IN ACCESSIBLE FIXTURES

http://www.sterlingplumbing.com cthrush Highlight

10"

Install this product according to the installation instructions.

All product dimensions are nominal.

3-Wall AlcoveInstallation:

Studs should be positioned roughly as shown.CenterDrain location:

Double studding is recommended for pivot shower door installations.

3-1/4" (83 mm)Minimum flat for door:

3-1/2" (89 mm)Threshold height:

Base cannot be installed without the wall surround.

70-5/8" (1794 mm)Door height required:

56-5/8" (1438 mm)Door width required:

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:08

Accord®

60" Seated Shower 72290100

THIS ITEM IS DELETED - INCLUDED IN ACCESSSIBLE FIXTURES

http://www.sterlingplumbing.com

• Frameless, 1/4-inch-thick (6mm) Clear tempered glass.

• Knob handle keeps the design line simple and unobstructed.

• Low threshold (1-3/4-inch) for easy entry and exit.

• CleanCoat® glass treatment repels water for improved ease of cleaning

• Magnetic seal keeps door firmly closed, providing excellent water containment.

• Out-of-Plumb adjustability for simple installation.

Material

• Anodized aluminum hardware prevents rusting or corrosion.

Installation

• Sliding shower door.

• Pre-assembled frame requires no cutting during installation. Codes/Standards• 1-inch width adjustability on each wall jamb (offering 2-inch total adjustability).

ANSI Z97.1 (Tempered Glass) CPSC 16CFR 1201• Filler sections (K-1296811) can be used to extend the width of an enclosure door by 5/8 inch. See website for detailed warranty information.

Components

Additional included component/s: Hardware Kit.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

SilverS

Available Glass Options DescriptionCode

ClearG05

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

11-14-2017 08:02

Whiston™

60" Sliding Door 572108-59

Or Approved Equal

Frosted is Preferred http://www.sterlingplumbing.com cthrush Highlight cthrush Highlight cthrush Highlight cthrush Highlight

58-7/8" (1495 mm) Max

Install this product according to the installation instructions.

All product dimensions are nominal.

For shower base installationInstallation type:

The vertical opening should be a minimum of 75" (1905 mm) to allow for installation clearance.

56-7/8" (1445 mm)Opening Width - Min:

58-7/8" (1495 mm)Opening Width - Max:

25-5/8" (651 mm)Walk-through - Min:

25-5/8" (651 mm)Walk-through - Max:

1/4" (6 mm)Glass thickness:

CleanCoat®Glass coating:

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

11-14-2017 08:02

Whiston™

60" Sliding Door 572108-59 http://www.sterlingplumbing.com

SPEAKMAN

400 ANCHOR MILL ROAD

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

DECEMBER 2016

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

FEATURES:

• 6 plungers, 48 sprays

• Solid brass construction

• Spray adjusting handle

• 1/2 in. NPT inlet

• Patented plungers resist scale buildup

• 2.5 gpm (9.5 L/min) flow rate

FINISH:

OPTIONS: Add suffix to model #

• 2.0 gpm (7.6 L/min) flow rate ❑ -E2

• 1/2 in. British pipe thread inlet ❑ -BPT

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 compliant

• WaterSense certified (E2)

WARRANTY:

• Limited Lifetime Warranty (consumer use)

• 1 Year Limited (commerical use)

S-2252 Icon™ Shower Head

3 13 16 "

96mm

4" 101mm

1 9 16 "

40mm

1/2 NPT Female Supply Inlet

2 3 4"

70mm

PC PB ORBBN PN MB

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice.

Or Approved Equal

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

JANUARY 2018

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

FEATURES

VALVE:

• Anti-scald protection

• Pressure balancing ceramic cartridge

• Adjustable temperature limit stop

• Integral stops

• 1/2” NPT female tub outlet

• 1/2” sweat shower outlet

• 1/2” sweat inlets

• Includes rough-in template

TRIM:

• Modern style

• Mounting plate with seal

• Metal handle

• Durable plastic trim plate

FINISH:

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 certified

• Meets ASSE 1016

WARRANTY:

• 1 Year Limited

SM-1000-P

Neo™ Pressure Balance Valve and Trim

PC BN

Or Approved Equal

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

JANUARY 2018

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Unless otherwise specified, all inlets and outlets are 1/2” female copper sweat. 3. For ADA mounting locations, consult ADAAG, ANSI A117.1, or static regulations.

Contractor pack valves & trim kits available.

INSTRUCTIONS FOR MODELS

92-CPT-1000-P-02

For additional assistance or service please contact:

SPEAKMAN® Company 400 Anchor Mill Road New Castle, DE 19720

800-537-2107 customerservice@speakman.com www.speakman.com

CPT-1000-P

CPT-1001-KN

TOOLS AND SUPPLIES

Phillips Screwdriver

Measuring Tape

Additional warranty information can be found at:

www.speakman.com

WARRANTY

MAINTENANCE

Cover your drain to prevent loss of parts.

SAFETY TIPS

IMPORTANT

• Be sure to read instructions thoroughly before beginning installation.

• Do not over-tighten any connections or damage may occur.

• Be sure to have properly adjusted the Temperature Limiting Stop (TLS) as per the Valve Installation Instructions before installing Valve Trim.

Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty. Please be sure to only use approved cleaners. Please contact Speakman for any clarification of acceptable cleaners.

1 Clean wall surface. Place Mounting Base (1) onto the valve, align mounting holes, and secure with supplied screws (2).

2 There are two connectors included to allow for both Shallow Mount (Valve Centerline is 2.5-3.0” from finished wall surface) and Deep Mount (Valve Centerline is 3.0”-3.5” from finished wall surface) applications. Please select Connector appropriate for your installation.

For Deep Mount ApplicationFor Shallow Mount Application

3 Confirm that Valve is in the “Off” position. Place appropriate Connector on to the Spindle of the Valve, making sure to orient the Connector so that one set of Splines are in a perfectly vertical position.

Splines in Vertical Position

When installed correctly, the Connector (1) should protrude from the Mounting Base (2) in-between 5/16” and 1”. Secure Connector with 8-32 screw provided (3). If your installation does not fall within this range, try swapping Connectors.

IMPORTANT

5/16” to 1”

5 Place Escutcheon (1) on Mounting Base. Take care to orient the Escutcheon as shown below. 6 Align Handle Assembly with Connector (1) and Escutcheon as shown below. Keep Handle (2A) in a stationary vertical position and place over Connector (1) and engage the Splines of the Connector with the Handle Assembly. Keep Handle in the vertical position as you thread Handle Hub (2B) on to Mounting Base. Tighten until snug.

CPT-1000-P / CPT-1001-KN REPAIR PARTS SPEAKMAN®

RPG05-0874 SCREWS AND SPLINE ADAPTERS

RPG10-0093-XX (XX=FINISH) TRIM PLATE FOR CPT-1000-P

RPG10-104303-XX (XX=FINISH) TRIM PLATE FOR CPT-1001-KN (KNURLED)

RPG04-0388-XX (XX=FINISH) HANDLE ASSEMBLY FOR CPT-1000-P

RPG04-104314-XX (XX=FINISH) HANDLE ASSEMBLY FOR CPT-1001-KN (KNURLED)

RPG05-0948 1.5 GPM AERATOR ASSEMBLY WITH WRENCH

RPG63-0096 END BODY TO SPOUT - S/S BRAIDED HOSE CONNECTION

RPG24-0132 POLISHED NICKEL FINISH - ALL BRASS DRAIN ASSEMBLY

RPG24-0133 POLISHED BRASS FINISH - ALL BRASS DRAIN ASSEMBLY

ITEM NO. PART NO. DESCRIPTION

CPT-1000-P / CPT-1001-KN ROUGH-IN DIAGRAM SPEAKMAN®

DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.

VALVE MOUNTING IS SHOWN FOR REFERENCE ONLY.

VALVE IS NOT INCLUDED WITH

CPT-1000-P / CPT-1001-KN

1" 25mm

HOLE FOR

SHOWER ARM

5 1 2 "

140mm

HOLE FOR

VAVLE ACCESS

5 13 16 "

147mm

1'-9" [533mm]

4" [102mm]

TO TOP OF

TUB LEDGE

4'-6"

[1.4 METERS]

TO FLOOR

(SHOWER INSTALL ONLY)

6'-6"

[2 METERS]

TO FLOOR

1" 25mm

HOLE FOR

TUB SPOUT

A

A

2-1/2" [64mm] MINIMUM 3-1/2" [89mm] MAXIMUM

ROUGH IN DEPTH

3 7 16 "

87mm

SECTION A-A

R3 1 2 "

88.9mm 2"

50.4mm

2 "

12.7mm

3 1 2 "

88.4mm

16 "

23.6mm

8 "

22.6mm

2" 51mm

3 1 2 "

88.8mm

Or Approved Equal

Or Approved Equal

This Venting Style cthrush Highlight cthrush Highlight

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

SPECIFICATION SHEET

TAG _______

* Regularly furnished unless otherwise specified.

Zurn Industries, LLC | Specification Drainage Operation 1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929

In Canada | Zurn Industries Limited 3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax 905-405-1292 www.zurn.com

Rev. E Date: 09/25/2017 C.N. No. 137930 Prod. | Dwg. No. Z611

Z611

9 [229] MEDIUM-DUTY DRAIN

____ -VP Vandal-Proof Secured Top ____ -90 90º Side Outlet

(2 [51], 3 [76] Hub or Threaded Only)

OPTIONS (Check/specify appropriate options)

PIPE SIZE (Specify size/type) OUTLET 'E' BODY HT. DIM.

2, 3, 4 [51, 76, 102] ____ IP Threaded 5 [127] 2, 3, 4 [51, 76, 102] ____ NH No-Hub (IP w/ Z1040) 7-1/2 [191] 2, 3, 4 [51, 76, 102] ____ NL Neo-Loc 6-1/8 [156]

PREFIXES

____ Z D.C.C.I. Body and Top* ____ ZB D.C.C.I. Body w/Polished Bronze Top (Add 3/16 [5] to 2 [51] and 9 [229] Dim.)

____ ZN D.C.C.I. Body w/Polished Nickel Bronze Top (Add 3/16 [5] to 2 [51] and 9 [229] Dim.)

SUFFIXES

____ -AR Acid Resistant Epoxy Coated Cast Iron ____ -DG Duresist Grate ____ -G Galvanized Cast Iron ____ -LY (Less) Sediment Bucket ____ -P Trap Primer Connection ____ -S Secondary Strainer ____ -TC Neo-Loc Test Cap Gasket

(2, 3, 4 [51, 76, 102] NL Bottom Outlet Only) ____ -V Backwater Valve (See Z1099)

2, 3, 4 [51, 76, 102] 29 [13] 26 [168]

A Pipe Size In.[mm]

Approx.

Wt. Lbs.

[kg]

Grate Open Area Sq. In.

[cm2]

ENGINEERING SPECIFICATION: ZURN Z611

9" [229mm] Square top drain, Dura-Coated cast iron body with bottom outlet, seepage pan and combination membrane flashing clamp and frame for cast iron medium-duty slotted grate, with suspended sediment bucket.

Or Approved Equal

PRODUCT FEATURES:

Materials of Construction: Metal construction for durability & long life.

Concealed Mounting: No exposed set screws.

Easy to Install

STUDIO S®

BATH ACCESSORIES

ROBE HOOK

MODEL NUMBER:

❏ 7105.210 - ROBE HOOK

SUGGESTED SPECIFICATION

Robe Hook shall feature metal construction. Shall feature concealed mounting with no exposed set screws. Robe Hook shall be American Standard Model # 7105.210.___.

2-15/16" (74 mm) 2"

(50 mm)

1-5/8" (41 mm)

4-1/16" (103 mm)

Available Finishes 002 Polished Chrome

295 PVD Brushed Nickel

© 2017 AS America, Inc.

8/17

Or Approved Equal

PRODUCT FEATURES:

Materials of Construction: Metal construction for durability & long life.

Concealed Mounting: No exposed set screws.

Easy to Install

Easy to Use

STUDIO S®

BATH ACCESSORIES

TOILET PAPER HOLDER

MODEL NUMBER:

❏ 7105.230 - Toilet Paper Holder

SUGGESTED SPECIFICATION

Toilet Paper Holder shall feature metal construction. Shall feature concealed mounting with no exposed set screws.

Toilet Paper Holder shall be American Standard Model # 7105.230.___.

6-3/8" (162 mm)

2" (50 mm)

4-1/16" (103 mm)

2" (50 mm)

Available Finishes 002 Polished Chrome

295 PVD Brushed Nickel

© 2017 AS America, Inc.

8/17

Or Approved Equal

Government Furnished Material

2/2/2018 FV-05-11VKSL1_SpecSheet

1/2

MORE DETAILS Product Family Name WhisperGreenSelect Fan/Light

Air Volume Exhaust (CFM) 50 @ 0.1" SP, 53 @ 0.25" SP, 80 @ 0.1" SP, 86 @ 0.25" SP, 110 @ 0.1" SP, 114

0.25" SP

Noise (Sones) 50 @ 0.1" SP = less than 0.3, 53 @ 0.25" SP = less than 0.3, 80 @ 0.1" SP = less than 0.3, 86 @

0.25" SP = 0.6, 110 @ 0.1" SP = 0.4, 114 @ 0.25" SP = 0.9

Power Consumption (Watts) 50 CFM = 4W, 80 CFM = 6.0W, 110 CFM = 11.1W, Energy Efficiency (CFM/Watt) 50 CFM = 12.8CFM/W, 80 CFM = 13.3CFM/W, 110 CFM = 9.9CFM/W, Current (Amps) 50 CFM = .04A, 80 CFM = .07A, 110 CFM = .12A, Power Rating (V/Hz) 120/60

Motor Type (AC/DC) DC

Motion Sensor Optional

Humidity/Condensation Sensor Optional

Multi-Speed with Time Delay Pre-Installed

Duct Diameter 4" & 6"

Installation Ceiling

Radiation Damper Available Yes

Mounting Opening (in sq.) 10-1/2"

Grille Size (in sq.) 13"

Light Type (CFL/LED) LED

Lamp Watts 2 x 7W

WhisperGreen Select™ FV-05-11VKSL1 50-80-110 CFM, Ceiling Mount Fan/Light, Pre- Installed Multi-Speed with Time Delay

FV-05-11VKSL1

Government Furnished Material

2/2/2018 FV-05-11VKSL1_SpecSheet

2/2

Color Temperature (Kelvin) and Color Rendering Index (CRI) 3000K / >80 CRI

Lumens (lm) 550lm Per Lamp

Lamp Rated Average Life (hrs.) 40000

Lamp Model # LPHT7

Night Light Optional

ENERGY STAR® Certified YES

Other Approved Codes and Standards ASHRAE 62.2, LEED, CALGreen, California Title 24, Washington

VIAQ

UL Listed for Tub/Shower Enclosure when used with a GFCI Protected Circuit Yes

Warranty 6 Year DC Motor, 5 Year LED, 3 Year Parts

Master Carton Dimensions (HxWxD) 16-4/5" x 14-1/4" x 12

Master Carton Gross Weight (lbs.) 14.3

UPC885170179943

ADA Compliant Product Cut Sheets/

Specifications

WirthCad Stamp

WirthCad Stamp

WirthCad Stamp

• One-piece toilets integrate the tank and bowl into a seamless, easy-to-clean design.

• Elongated bowl offers added room and comfort.

• Comfort Height® feature offers chair-height seating that makes sitting down and standing up easier for most adults.

• 1.28 gallons per flush (gpf).

• 2-1/8-inch glazed trapway.

• Standard left-hand Polished Chrome trip lever included.

• Supply line not included.

• Coordinates with other products in the Cimarron collection.

• Flush valve's 3: 2 ratio harnesses the natural force of gravity and optimizes flush performance

CSA B651 OBC

Technology

• Durable canister design has 90% less exposed seal material than a 3-inch flapper, for leak-free performance.

• Single-flush gravity uses the force of gravity and a precision-engineered tank, bowl, and trapway to create a strong siphon during flushing.

Codes/Standards ASME A112.19.2/CSA B45.1• AquaPiston canister allows water to flow into the bowl from all sides (360 degrees), increasing the power and effectiveness of the flush.

EPA WaterSense®

ADA

ICC/ANSI A117.1

• Flush valve's 3: 2 ratio harnesses the natural force of gravity and optimizes flush performance.

CSA B651

OBC

• Durable canister design has 90% less exposed seal material than a 3-inch flapper, for leak-free performance. KOHLER® One-Year Limited Warranty

• Light-touch canister flush requires a lower actuation force than a flapper.

See website for detailed warranty information.

Installation Available Color/Finishes• Standard 12-inch rough-in.

Color tiles intended for reference only.

Water Conservation & Rebates DescriptionCodeColor• WaterSense® toilets meet strict EPA flushing guidelines, including using at least 20 percent less water than 1.6-gallon toilets.

White0

Biscuit96• Eligible for consumer rebates in some municipalities.

Almond47

Recommended Accessories K-75796 Cachet® Nightlight Quiet-Close™ Elongated Toilet Seat

DuneNY

Ice™ Grey95 K-4108 C3®-230 Elongated Cleansing Toilet Seat K-5420 Low-Profile Bolt Caps SandbarG9

Mexican Sand™33K-9466-L Left-hand Trip Lever

Components Product includes:

K-4008 Reveal® Quiet-Close™ Elongated Toilet Seat Additional included component/s: Tank cover, Trip lever, Toilet seat, Tank accessory pack, and Bolt cap accessory.

CashmereK4

Thunder™ Grey58

Black Black™7

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-12-2018 04:41

Cimarron®

Comfort Height® Toilet K-3828

28-15/16" (735 mm)

Install this product according to the installation instructions.

All product dimensions are nominal.

One-pieceToilet type:

For back-to-back toilet installations: Use only a 45° double wye fitting.Elongated frontBowl shape:

OtherFlush type:

The Model Plumbing Codes require the installation of elongated open-front toilet seats in public bathrooms.

Quick-Attach®, Quiet-Close™, Quick-Release™

Seat hinge type:

2-1/8" (54 mm)Trap passageway:

ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.

Water Consumption

1.28 gpf (4.8 lpf)Full:

Plumbing Codes require elongated toilets and elongated, open-front toilet seats in public bathrooms.

11-3/4" x 8" (298 mm x 203 mm)Water surface size:

6-1/8" (156 mm)Rim to water surface:

12" (305 mm)Rough-in:

Accessibility standards require controls to be located on the open side of the toilet.5-1/2" (140 mm)Seat-mounting holes:

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-12-2018 04:41

Cimarron®

Comfort Height® Toilet K-3828

• Made from premium materials that withstand high-volume usage.

• Constructed of vitreous china.

• 19-1/4" L x 17-1/4" W

• Wall-mount installation.

• Faucet not included.

• Ledge-back

• Includes wall hanger.

• Drilled for concealed arm carrier.

Recommended Accessories K-8998 P-Trap

Components Additional included component/s: Hanger.

Codes/Standards

ASME A112.19.2/CSA B45.1

ADA

ICC/ANSI A117.1

KOHLER® One-Year Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

Biscuit96

Almond47

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-12-2018 03:34

Chesapeake™

Wall-Mount Bathroom Sink K-1722

Standard Installation

Install this product according to the installation instructions.

All product dimensions are nominal.

SingleBowl configuration:

ADA compliant when installed to the specific requirements of these regulations.Wall-mountInstallation:

Length: 14" (356 mm) Width: 11" (279 mm) Water depth: 4-7/16" (113 mm)

Bowl area (Only):

1Number of deck holes:

1-3/8" (35 mm)Faucet hole(s):

1-3/4" (44 mm)Drain hole:

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-12-2018 03:34

Chesapeake™

Wall-Mount Bathroom Sink K-1722

• Single lever handle allows for both volume and temperature control.

• KOHLER ceramic disc valves exceed industry longevity standards for a lifetime of durable performance.

• Temperature memory allows faucet to be turned on and off at the temperature set during prior usage.

• 1.2 gal/min (4.5 l/min) maximum flow rate [max at 60 psi (4.14 bar)].

• Includes metal pop-up drain with 1-1/4" tailpiece.

• 4-3/8" (111 mm) spout reach.

• Coordinates with July faucets, accessories, and showering components to complete your bathroom.

Material

CSA B651 OBC

• Premium Metal Construction

• KOHLER finishes resist corrosion and tarnishing

Installation Codes/Standards• For single-hole installation.

ASME A112.18.1/CSA B125.1• Pre-attached flexible supply lines simplify installation

NSF/ANSI 61

NSF/ANSI 372

All applicable US Federal and State material regulations DOE - Energy Policy Act 1992 EPA WaterSense®

California Energy Commission (CEC)

ADA

ICC/ANSI A117.1

CSA B651

OBC

KOHLER® Faucet Lifetime Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

Polished ChromeCP

Brushed ChromeG

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-16-2018 02:40

July™

Single-hole Bathroom Sink Faucet K-16027-4

2-3/16" (56 mm) Max

Install this product according to the installation guide.

All product dimensions are nominal.

Faucet:

ADA, OBC, CSA B651 compliant when installed to the specific requirements of these regulations.

1.2 gal/min (4.5 l/min)Flow rate:

60 psi (4.1 bar)Pressure:

YESDrain included:

YESDrain tailpiece included:

Spout:

4-3/8" (111 mm)Spout reach:

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

2-16-2018 02:40

July™

Single-hole Bathroom Sink Faucet K-16027-4

Customer Service: 800.945.2726 • aquaticbath.com inches

Aquatic products may be specified as Lasco Bathware.

COLOR & TRIM OPTIONS

Stock Upgraded

White Almond Biscuit Bone

**Additional custom colors available.

(Contact Customer Service)

F1604P – ACCESSIBLE SHOWERS

Interior: 60 x 34 x 75 1⁄2 Exterior: 63 3⁄4 x 37 1⁄8 x 78 1⁄4

FEATURES

– Pre-leveled base

– AcrylX™ applied acrylic surface

– 1” skirt

– 1⁄2” beveled threshold

– Barrier free when properly installed

– 4-pc

– Diagonal tile design

– Center drain

– Lifetime limited warranty (30 year commercial)

OPTIONS

– Grab bars

– Fold-up seat

– Hand-held shower assembly with slide bar

– Pressure balancing mixing valve

– Soap dish

– Curtain rod and/or shower curtain

CODE COMPLIANCE

– ADA

– FHA

– ICC/ANSI A117.1

– IAPMO Z124-2011

– HUD UM73a

– CAN/CSA-B651-04

– CSA-B45-11

**Code compliant when fully equipped and installed according to guidelines.

The F1604P roll-in shower features innovative installation design, including an engineered leveled base and improved front threshold. A true time and money saver, our pre-leveled base lets you install directly on a level floor. And its front threshold is engineered to keep a constant level without the use of brackets during installation.

AQUATIC

ADVANTAGE

– National distribution

– 6 manufacturing facilities

– Private fleet

– Centralized customer service

– Field support

Customer Service: 800.945.2726 • aquaticbath.com

TECHNICAL SPECIFICATIONS

Aquatic products may be specified as Lasco Bathware.

F1604P Interior: 60 x 34 x 75 1⁄2

Exterior: 63 3⁄4 x 37 1⁄8 x 78 1⁄4 inches

60" (1525)

56 ¹/₈" (1425)

6" (150)

76" (1930) 34"

(865)

D

W

C

B

A

22" (560)

26" (660)

18" (460)

Shelf Space Top: 4" x 12 1/2" (100 x 320) Mid: 4" x 13 3/4" (100 x 350) Bottom: 4" x 16 1/4" (100 x 415)

FEATURES Dimensional Tolerance ± 3⁄8”. Dimensions needed for site preparation should be measured from the unit. Aquatic assumes no responsibility for preparatory work.

Type and Model # Material Wall Finish Pieces Drain Dam/Skirt Height Net Wt.

lbs

Pkg. Wt.

lbs

Shower #F1604P AcrylX™ Smooth tile 4 Center 1” skirt, 1⁄2” threshold 174 184

FRAMING DIMENSIONS inches

Type D Depth

W Width

H Height A B C

Alcove 37 1⁄8 63 7⁄8 – Box Out 31 7⁄8 18 7⁄8

DIMENSIONS

Specifications inches

Width: Overall / Net 63 3⁄4 / 60

Depth: Overall / Net 37 1⁄8 / 34

Height: Overall / Net 78 1⁄4 / 75 1⁄2

Enclosure Opening: 60

Skirt Height: 1

Drain Rough-In (from Back Wall) 18 7⁄8

Drain Rough-In (from Side Wall) 31 7⁄8

ADA/ANSI compliant when fully equipped and installed according to guidelines.

Rev. 12.12.17

ADA Allowed ½" Change in Level

1"

Recess or build-up required DETAIL B

26" 20"

1 7⁄8" 60" INT. 1 7⁄8"

77 3⁄4"

EXT.

6"

4"

1"

18"

42" 34 1⁄2"

A

A

3 1⁄4"

DRAIN

22 1⁄2" 1 1⁄2"

1"

14 1⁄2"

31"

3"

18 7⁄8"

37 1⁄8"

EXT.

31 7⁄8" 15"

63 3⁄4" EXT.

76 5⁄8"

INT.

1 1⁄4" 34" INT. 1 7⁄8"

6" 4"

B

SECTION A-A

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

NOVEMBER 2017

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

FEATURES:

• 5 plungers, 45 sprays

• 12 center massage jets

• Durable plastic construction

• Spray adjusting faceplate

• Patented plungers resist scale buildup

• Includes 5’ metal hose with built-in vacuum breaker and arm bracket

• 2.5 gpm (9.5 L/min) flow rate

FINISH:

OPTIONS: Add suffix to model #

• 2.0 gpm (7.6 L/min) flow rate ❑ -E2

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 compliant

• WaterSense certified (E2)

WARRANTY:

• Limited Lifetime Warranty (consumer use)

• 1 Year Limited (commerical use)

VS-3010

Neo™ Hand Shower Head

PC BN

ROUGH IN DIMENSIONS

VS-3010

Max. Flow Rate: 2.5 gpm (9.5L/min) Min. Flow Rate: 2.0 gpm (7.6 L/min) @ 45psi

FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED AT

7.6 L/MIN (2.0 GPM) OR LESS.

VS-3010-E2

Max. Flow Rate: 2.0 gpm (7.6 L/min) Min. Flow Rate: 1.5 gpm (5.7 L/min) @ 45psi

FOR USE WITH AUTOMATIC COMPENSATING VALVES RATED AT

6.6 L/MIN (1.75 GPM) OR LESS.

4.0in

9.5in 240 mm

102 mm

1/2-14 NPSM

THREADED

INLET

2.3in 58 mm

1/2-14 NPT

THREADED

INLET

1/2-14 NPSM

THREADED

OUTLET

5’ HOSE

Inlet: 1/2” NPSM FEMALE

MARKED “VACUUM BREAKER”

Outlet: 1/2” NPSM FEMALE

MARKED “TO HAND SHOWER”

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice.

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

AUGUST 2016

Architect/Engineer Approval Space: P:

F:

W:

R:358

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice.

FEATURES:

• Polished chrome plated brass 6 in. shower arm.

• Stainless steel wall flange.

• ½ in. NPTM connections.

FINISH:

WARRANTY:

• 1 year limited

Arm and Flange

S-2520 satinbbz

PC

satinbbz

BN satinbbzPB

01/11

REV 2

92-1813

SPEAKMAN COMPANY

S-2520 Installation, Maintenance & Operation Instructions

SHOWER ARM AND FLANGE

DESCRIPTION

Speakman polished chrome plated brass 5-1/2” (140mm) shower arm. Stainless steel wall flange.

SPECIFICATIONS

½” NPT MALE INLET

½” NPT MALE OUTLET

SHIPPING WEIGHT: 0.4 LBS.

INSTALLATION

Slip wall flange onto shower arm. Apply teflon tape or pipe dope to male inlet threads and thread arm into piping behind wall. Wrench tighten. Slip wall flange flush to wall. Check connection for leaks.

MAINTENANCE

PB: Polish Brass

BN: Brushed Nickel

Product improvements may cause specification and dimensional changes without notice.

The gleaming finish of your SPEAKMAN S-2520 shower arm can be cleaned by using mild soap and warm water. Dry immediately with a soft, clean cloth for best results.

ROUGH-IN MEASUREMENTS

SPEAKMAN®

PO Box 191 Wilmington, DE 19899 Phone: 800-537-2107 Fax: 800-977-2747

Visit us on the web at www.speakmancompany.com

OPTIONS

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

JANUARY 2018

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

FEATURES

VALVE:

• Anti-scald protection

• Pressure balancing ceramic cartridge

• Adjustable temperature limit stop

• Integral stops

• 1/2” NPT female tub outlet

• 1/2” sweat shower outlet

• 1/2” sweat inlets

• Includes rough-in template

TRIM:

• Modern style

• Mounting plate with seal

• Metal handle

• Durable plastic trim plate

FINISH:

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 certified

• Meets ASSE 1016

WARRANTY:

• 1 Year Limited

SM-1000-P

Neo™ Pressure Balance Valve and Trim

PC BN

Or Approved Equal

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

JANUARY 2018

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Unless otherwise specified, all inlets and outlets are 1/2” female copper sweat. 3. For ADA mounting locations, consult ADAAG, ANSI A117.1, or static regulations.

Contractor pack valves & trim kits available.

INSTRUCTIONS FOR MODELS

92-CPT-1000-P-02

For additional assistance or service please contact:

SPEAKMAN® Company 400 Anchor Mill Road New Castle, DE 19720

800-537-2107 customerservice@speakman.com www.speakman.com

CPT-1000-P

CPT-1001-KN

TOOLS AND SUPPLIES

Phillips Screwdriver

Measuring Tape

Additional warranty information can be found at:

www.speakman.com

WARRANTY

MAINTENANCE

Cover your drain to prevent loss of parts.

SAFETY TIPS

IMPORTANT

• Be sure to read instructions thoroughly before beginning installation.

• Do not over-tighten any connections or damage may occur.

• Be sure to have properly adjusted the Temperature Limiting Stop (TLS) as per the Valve Installation Instructions before installing Valve Trim.

Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty. Please be sure to only use approved cleaners. Please contact Speakman for any clarification of acceptable cleaners.

1 Clean wall surface. Place Mounting Base (1) onto the valve, align mounting holes, and secure with supplied screws (2).

2 There are two connectors included to allow for both Shallow Mount (Valve Centerline is 2.5-3.0” from finished wall surface) and Deep Mount (Valve Centerline is 3.0”-3.5” from finished wall surface) applications. Please select Connector appropriate for your installation.

For Deep Mount ApplicationFor Shallow Mount Application

3 Confirm that Valve is in the “Off” position. Place appropriate Connector on to the Spindle of the Valve, making sure to orient the Connector so that one set of Splines are in a perfectly vertical position.

Splines in Vertical Position

When installed correctly, the Connector (1) should protrude from the Mounting Base (2) in-between 5/16” and 1”. Secure Connector with 8-32 screw provided (3). If your installation does not fall within this range, try swapping Connectors.

IMPORTANT

5/16” to 1”

5 Place Escutcheon (1) on Mounting Base. Take care to orient the Escutcheon as shown below. 6 Align Handle Assembly with Connector (1) and Escutcheon as shown below. Keep Handle (2A) in a stationary vertical position and place over Connector (1) and engage the Splines of the Connector with the Handle Assembly. Keep Handle in the vertical position as you thread Handle Hub (2B) on to Mounting Base. Tighten until snug.

CPT-1000-P / CPT-1001-KN REPAIR PARTS SPEAKMAN®

RPG05-0874 SCREWS AND SPLINE ADAPTERS

RPG10-0093-XX (XX=FINISH) TRIM PLATE FOR CPT-1000-P

RPG10-104303-XX (XX=FINISH) TRIM PLATE FOR CPT-1001-KN (KNURLED)

RPG04-0388-XX (XX=FINISH) HANDLE ASSEMBLY FOR CPT-1000-P

RPG04-104314-XX (XX=FINISH) HANDLE ASSEMBLY FOR CPT-1001-KN (KNURLED)

RPG05-0948 1.5 GPM AERATOR ASSEMBLY WITH WRENCH

RPG63-0096 END BODY TO SPOUT - S/S BRAIDED HOSE CONNECTION

RPG24-0132 POLISHED NICKEL FINISH - ALL BRASS DRAIN ASSEMBLY

RPG24-0133 POLISHED BRASS FINISH - ALL BRASS DRAIN ASSEMBLY

ITEM NO. PART NO. DESCRIPTION

CPT-1000-P / CPT-1001-KN ROUGH-IN DIAGRAM SPEAKMAN®

DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.

VALVE MOUNTING IS SHOWN FOR REFERENCE ONLY.

VALVE IS NOT INCLUDED WITH

CPT-1000-P / CPT-1001-KN

1" 25mm

HOLE FOR

SHOWER ARM

5 1 2 "

140mm

HOLE FOR

VAVLE ACCESS

5 13 16 "

147mm

1'-9" [533mm]

4" [102mm]

TO TOP OF

TUB LEDGE

4'-6"

[1.4 METERS]

TO FLOOR

(SHOWER INSTALL ONLY)

6'-6"

[2 METERS]

TO FLOOR

1" 25mm

HOLE FOR

TUB SPOUT

A

A

2-1/2" [64mm] MINIMUM 3-1/2" [89mm] MAXIMUM

ROUGH IN DEPTH

3 7 16 "

87mm

SECTION A-A

R3 1 2 "

88.9mm 2"

50.4mm

2 "

12.7mm

3 1 2 "

88.4mm

16 "

23.6mm

8 "

22.6mm

2" 51mm

3 1 2 "

88.8mm

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 9/1/17S/B Printed in U.S.A.

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.

Technical Data

L

L

Edge of Flange to Wall

36'' 915mm

4'' 100mm

39-3/4'' 1010mm 57-3/4''

1465mm

50'' 1270mm

Edge of Flange to Wall

Edge of Flange to Wall

32'' 815mm

4'' 100mm

39-3/4'' 1010mm

27-3/4'' 705mm

24'' 510mm

Edge of Flange to Wall continued . . .

42'' 1065mm

4'' 100mm

50'' 1270mm

57-3/4'' 1465mm

45-3/4'' 1160mm

Edge of Flange to Wall

Edge of Flange to Wall

2'' 50mm

2-1/4'' 55mm

3-1/8'' 80mm

5/16'' 8mm

Snap Flange Cover

3-1/4'' 85mm Dia.

1-1/2'' 38mm

End Mounting Flange

3-1/8'' 80mm

Intermediate Flange

2-5/8'' 65mm

2-1/4'' 55mm

3-1/8'' 80mm

1¼" (32mm) DIAMETER

STAINLESS STEEL GRAB BARS

WITH SNAP FLANGE

B-5806

SERIES

Satin finish Satin finish with peened gripping surface; add suffix .99 to model number

Specify Finish Required:

HORIZONTAL VERTICAL

B-5806 x 18, 24, 30, 36, 42, 48

TWO-WALL

TUB / SHOWER

COMPARTMENT BAR

B-5837

HORIZONTAL

TUB / SHOWER

COMPARTMENT BAR 24 x 36

B-58616

TWO-WALL

TOILET COMPARTMENT BAR 42 x 54

B-5897

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-5806 r8/31/17S/B Printed in U.S.A.

The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.

MATERIALS:

Grab Bar — 18-8, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-finish. 1-1/4" (32mm) outside diameter. Ends are heliarc welded to concealed mounting flanges. Clearance between the grab bar and wall is 1-1/2" (38mm).

Concealed Mounting Flanges — 18-8, type-304, 11-gauge (3.2mm) thick, stainless steel plate; end flanges 2" x 3-1/8" (50 x 80mm) with holes for attachment to wall. Intermediate flanges 2-5/8" x 3-1/8" (65 x 80mm) wide x 3-1/8" (80mm) diameter.

Snap Flange Covers — 18-8, type-304, 22-gauge (0.8mm) drawn stainless steel with satin-finish. 3-1/4" (85mm) diameter x 5/8" (16mm) deep. Each cover snaps over mounting flange to conceal mounting screws.

STRENGTH:

Bobrick grab bars that provide 1-1/2" (38mm) clearance from wall can support loads in excess of 900 pounds (408kg) if properly installed. Other grab bar configurations can support loads in excess of 250 pounds (113kg) if properly installed, complying with accessible design (including ADAAG in the U.S.A.) for structural strength.

Safety Warning: Grab bars are no stronger than the anchors and walls to which they are attached and, therefore, must be firmly secured in order to support the loads for which they are intended. To avoid potential injury, the building owner or maintenance personnel should remove the grab bar from service if the grab bar is not adequately secured to wall or if there is any observed damage to the welds.

INSTALLATION:

Provide concealed anchor device or backing as specified or required in accordance with local building codes before wall is finished. Fasten concealed mounting flanges to anchor device or backing with at least two screws opposing each other in each flange. Snap flange covers over each mounting flange to conceal mount-ing screws. Concealed anchor devices and mounting screws are not included with Bobrick grab bars and must be specified as an accessory.

For Grab Bars with an Intermediate Flange(s), Pull Snap-Flange Covers away from mounting flanges. Place grab bar in desired mounting location. Use intermediate flange as a template to mark location of mounting screws at intermediate flange only. Mark screw locations at the center of the slot in the middle of the double-keyhole shaped mounting holes (2) in the intermediate flange. Remove grab bar from wall. Drive the intermediate flange mounting screws into wall at marked locations. Note: Make sure to leave a space of just over 1/8'' (3.17mm) between the underside of the screw head and the wall. Install grab bar on the wall by placing the round ends of the intermediate flange double-keyhole shaped mounting holes over the mounting screws (2) are located in the middle of the flange slots. Install the mounting screws into the wall at the end flanges and secure tightly. Tighten the mounting screws at the intermediate flange. Press all snap-flange covers into place to conceal mounting flanges.

Note: Recommend use of 1/4'' or #14 sheet metal or wood screws to install Intermediate Flange. #12 screws may also be used.

Important Notes:

1. Mounting Kits — Bobrick offers a mounting kit for installing grab bars; one Bobrick mounting kit is required for each flange.

2. Grab Bar Fastener — Bobrick offers a grab bar fastening system that secures all Bobrick grab bar series; one Bobrick fastener is required for each flange. Install grab bar without backing in wall requires minimum 5/8" (16mm) thick painted or tiled drywall.

3. Optional Anchor Device — Bobrick grab bar anchor device includes stainless steel machine screws to be used for attaching grab bars to anchors.

one Bobrick concealed anchor device is required for each flange.

SPECIFICATION:

Grab bar shall be type-304 stainless steel with satin-finish. Grab bar shall have 18-gauge (1.2mm) wall thickness and 1-1/4" (32mm) outside diameter. Clearance between the grab bar and wall shall be 1-1/2" (38mm). Concealed mounting flanges shall be 11-gauge (3.2 mm) thick stainless steel plate, 2" x 3-1/8" (50 x 80mm), and equipped with at least two screw holes for attachment to wall. Flange covers shall be 22-gauge (0.8mm) stainless steel, 3-1/4" (85mm) diameter, and shall snap over mounting flanges to conceal mounting screws and/or WingIt fasteners. Ends of grab bar shall pass through concealed mounting flanges and be heliarc welded to form one structural unit. Grab bar shall comply with accessible design (including ADAAG in the U.S.A.) for structural strength.

Grab Bar shall be Model __________ (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; and Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty.

Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

Description

Consists of 10–32 x 5/16'' round-head, Phillips 18/8 stainless steel screws.

(1) WingIt grab bar fastener.

WingIt™ Fastener No.

251-4

Mounting Kit No.

252-30

Description

Consists of (3) #14 x 2½'' type-304 stainless steel, Phillips round-head, sheet-metal screws.

Description

Anchor for 3/4" to 1" (19-25mm) panel 1 anchor required for each flange.

Anchor for 1/2" to 1" (13mm) panel 1 anchor required for each flange.

Optional Anchor No.

The illustrations and descriptions herein are applicable to production…