Attachment_2_-_Draft_Product_Specs.pdf

FOREST SERVICE

ASPEN BUNK HOUSE

SPEC BOOK

DECORATIVE

RETRO ROUNDS™

GLAZED PORCELAIN MOSAICS

DECORATIVE

RETRO ROUNDS™

GLAZED PORCELAIN MOSAICS

SOLID MOSAICS

BOLD WHITE GLOSS RR01 CREAM SODA RR05BOLD WHITE MATTE RR02 SADDLE BROWN RR06

POLKA DOT GLOSS RR03

DENIM BLUE RR10

POLKA DOT MATTE RR04

COBALT CIRCLE RR11 SMOKY GRAY RR12

DAFFODIL YELLOW RR07

ENGINE GRAY RR13

ORANGE SODA RR08

CANVAS BLACK GLOSS RR14

CHERRY RED RR09

CANVAS BLACK MATTE RR15

PATTERN MOSAICS

WirthCad Highlight

SIZES

Thickness Sq. Ft.

per Carton

Pieces per Carton

1 x 1 Penny Round Mosaic Solids (Mesh-mounted on a 12 x 12 sheet)

(12-7/16" x 11-9/16" Sheet) (31.60 cm x 29.40 cm Sheet)

3/16" 10.00 10

1 x 1 Penny Round Mosaic Patterns (Mesh-mounted on a 13 x 12 sheet)

(13-1/4" x 11-9/16" Sheet) (33.60 cm x 29.40 cm Sheet)

3/16" 10.63 10

INSTALLATION

Grout Joint Recommendation Shade Variation

Approximately 1/8" Solids

Patterns

Low (V1)

Random (V4)

TEST RESULTS

ASTM# Result

Water Absorption C373 < 0.5%

Breaking Strength C648 > 250 lbs.

Scratch Hardness MOHS 4.0

Chemical Resistance C650 Resistant

NOTES

Manufacturer Advisory: These tiles have a dynamic coefficient of friction < 0.42 as measured by the DCOF Acutest method. Tiles with DCOF values < 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.

Strong random shading enhances the natural beauty of this product.

To achieve optimal results, tile should be selected from multiple cartons and shading arrangement planned prior to installation.

Since there are variations in all fired ceramic products, tile and trim supplied for your particular installation may not match these samples. Final color selection should be made from actual tiles and trim and not from tile samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards.

Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps.

For additional information refer to “Factors to Consider” at daltile.com/Factors.

FLOOR APPLICATIONS

Target DCOF wet Suitable

Dry & Level – Interior N/A *

Wet & Level – Interior ≥ 0.42

Exterior Applications;

Pool Decking & Other Wet Areas with Minimal Footwear

≥ 0.60

Ramps & Inclines ≥ 0.65

A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

OTHER APPLICATIONS

Suitable

Walls/Backsplashes

Countertops **

Pool Linings

APPLICATION NOTES:

*Only matte colors suitable for residential and light commercial floors not subject to outside foot traffic

**Darker colors may show scratches. Only matte colors recommended for counter use.

Suitable for exterior wall applications in freezing and non-freezing climates when proper installation methods are followed.

DECORATIVE

RETRO ROUNDS™

GLAZED PORCELAIN MOSAICS

7834 C. F. Hawn Freeway, Dallas, Texas 75217 | 1.800.933.TILE

To view the complete collection of Daltile® products and information, visit our website at daltile.com.

DESIGNED TO HELP EARN LEED™

CREDITS. For more detailed information, visit daltilegreenworks.com. ©2016 Daltile (11/16)

SCAN QR CODE

FOR PRODUCT

INFORMATION

Get a QR Code reader at:

GET.DALTILE.COM

Generated by BeQRious.com

GLAZED CERAMIC

PRE-CONSUMER

RECYCLED MATERIALS

MADE IN THE U.S.A.

All or select items within this series meet the requirements for these qualifications.

NATURAL HH01

GREIGE HH02

DARK BROWN HH04

TEAK HH03

HILL HOUSE™ – GLAZED CERAMIC

SIZES

Thickness Sq. Ft./ Carton

Pieces/ Carton

6 x 36 Floor Tile

(5-7/8" x 35-7/16") (15.00 cm x 90.00 cm) 5/16" 13.05 9

APPLICATIONS

Target DCOF wet

Suitable

Dry & Level – Interior Floor N/A

Wet & Level – Interior Floor ≥ 0.42

Shower Floors (Residential or Light Commercial)

≥ 0.42

Exterior Floor Applications (including pool decking & other wet areas with minimal footwear)

≥ 0.60

Ramps & Inclines ≥ 0.65

Walls/Backsplashes N/A

Countertops N/A

Pool Linings N/A

A DCOF value of ≥ 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest™, visit daltile.com/DCOF.

APPLICATION NOTES:

Suitable for exterior applications in non-freezing climates, when proper installation methods are followed.

INSTALLATION

Grout Joint Recommendation Shade Variation

3/16" (Overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.)

High (V3)

PERFORMANCE CHARACTERISTICS

ASTM# Result

Water Absorption C373 < 7.0%

Breaking Strength C648 > 250 lbs

Scratch Hardness MOHS 8.0

Chemical Resistance C650 Resistant

Abrasion Resistance C1027 3

For additional information on test results, visit us at:

daltile.com/information/TestResults.

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation.

Manufactured in accordance with ANSI A137.1 standards.

Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection.

For additional information refer to “Factors to Consider” at:

daltile.com/Factors.

Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to daltile.com/LargeTiles for more information.

Use of a latex modified thin-set is recommended for installation.

For more information, visit daltile.com.

7834 C. F. Hawn Freeway | Dallas, Texas 75217

Features

• Vitreous china.

• Two-piece toilet.

• Comfort Height® Elongated bowl.

• Dual Flush flushing system.

• Includes top-mount dual flush trip lever.

• 1.6 gpf (6.0 lpf) or 1.0 gpf (3.8 lpf).

• Fully skirted trapway.

• Patented ReadyLock™ installation system.

• 12" (305 mm) rough-in.

• Supply line included.

• Seat not included.

• 4-1/2" (114 mm) x 5-3/4" (146 mm) water area.

• 28-5/8" (727 mm) x 14-3/16" (360 mm) x 32-1/2" (826 mm).

• Coordinates with other products in the Persuade Curv collection.

• Floor mount / Floor outlet.

Recommended Accessories K-4636 Cachet® Quiet-Close™ Elongated Toilet Seat Codes/Standards

ASME A112.19.2/CSA B45.1K-5588 Purefresh® Elongated Toilet Seat

ASME A112.19.14

Components Product includes:

K-4326 Skirted Trapway Bowl K-3569 Toilet Tank Additional included component/s: Tank cover, Dual flush push buttons, ReadyLock™ installation system, and Tank accessory pack.

DOE - Energy Policy Act 1992 EPA WaterSense®

California Energy Commission (CEC)

KOHLER® One-Year Limited Warranty See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

Biscuit96

Almond47

DuneNY

Ice™ Grey95

Black Black™7

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

12-3-2017 03:34

Persuade® Curv Dual Flush Toilet

K-6355 http://www.kohler.com

Finished Floor

NotesTechnical Information Install this product according to the installation instructions.

All product dimensions are nominal.

Two-piece, Floor-mountToilet type:

The rough-in must be 12" (305 mm) or more from the base of the wall or baseboard. Install orFloorWaste Outlet:

Elongated frontBowl shape: relocate the supply and outlet as necessary to conform to rough-in dimensions.2" (51 mm)Trap passageway:

Water Consumption If this toilet is installed in new construction, install a new supply stop following the dimensions in the diagram.

1.6 gpf (6 lpf)Full:

1 gpf (3.8 lpf)Reduced:

4-1/2" x 5-3/4" (114 mm x 146 mm)Water surface size: In installations with the supply stop installed, the existing supply stop may need to be relocated if8-1/2" (216 mm)Rim to water surface:

it is less than 8-1/2" (216 mm) from the centerline12" (305 mm)Rough-in:

of the toilet. Dry fit the toilet to confirm if the supply stop needs to be relocated.

5-1/2" (140 mm)Seat-mounting holes:

The supplied hose will extend roughly 6" (152

mm) from the toilet. If the supplied hose does not reach the supply stop, a longer supply hose may be used.

For back-to-back toilet installations: Use only a 45° double wye fitting.

USA/Canada: 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.kohler.com.

12-3-2017 03:34

Persuade® Curv Dual Flush Toilet

K-6355 http://www.kohler.com

• Modular design allows it to be moved around corners and through doorways with ease.

• Durable high gloss finish.

• Convenient shelves provide generous storage space.

• Geometric back wall design adds visual interest.

• 60" (1524 mm) x 36" (914 mm) x 75-3/4" (1926 mm) complete unit finished dimensions.

Material

• Compression molded from our exclusive Vikrell® material.

Installation

• Four-piece modular design with pivot "snap together" installation.

• Caulk-free installation.

Components Product includes:

72245100 36" Shower End Wall Set 72271100 60" Shower Base 72272100 60” Shower Back Wall

Codes/Standards

CSA B45.5/IAPMO Z124

ASTM E162

ASTM E662

Greenguard UL 2818 - Gold HUD, UM Bulletin 73

Warranty – Bathing Fixtures (and) Kitchen and Utility Sinks Made of Solid Vikrell® Material See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

KOHLER Biscuit96

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:06

Accord®

60" Shower 72270100 http://www.sterlingplumbing.com

60"

Install this product according to the installation instructions.

All product dimensions are nominal.

3-Wall AlcoveInstallation:

Studs should be positioned roughly as shown.CenterDrain location:

Double studding is recommended for pivot shower door installations.

3-1/4" (83 mm)Minimum flat for door:

3-1/2" (89 mm)Threshold height:

Base cannot be installed without the wall surround.

72" (1829 mm)Door height required:

56-5/8" (1438 mm)Door width required:

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:06

Accord®

60" Shower 72270100

• Modular design allows it to be moved around corners and through doorways with ease.

• Durable high gloss finish.

• Convenient shelves provide generous storage space.

• Geometric back wall design adds visual interest.

• Includes removable seat that can be placed on either side of the shower.

• 60" (1219 mm) x 36" (914 mm) x 74-3/4" (1898 mm) complete unit finished dimensions.

Material

• Compression molded from our exclusive Vikrell® material.

Installation

• Four-piece modular design with pivot "snap together" installation.

• Caulk-free installation.

Components Product includes:

72291100 60" Seated Shower Base 71164100 60" x 36" Bath/Shower Wall Set 72286104 Removable Seat

Codes/Standards Greenguard UL 2818 - Gold HUD, UM Bulletin 73

Warranty – Bathing Fixtures (and) Kitchen and Utility Sinks Made of Solid Vikrell® Material STERLING® Warranty - Bathing & Showering Seats See website for detailed warranty information.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

White0

KOHLER Biscuit96

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:08

Accord®

60" Seated Shower 72290100

10"

Install this product according to the installation instructions.

All product dimensions are nominal.

3-Wall AlcoveInstallation:

Studs should be positioned roughly as shown.CenterDrain location:

Double studding is recommended for pivot shower door installations.

3-1/4" (83 mm)Minimum flat for door:

3-1/2" (89 mm)Threshold height:

Base cannot be installed without the wall surround.

70-5/8" (1794 mm)Door height required:

56-5/8" (1438 mm)Door width required:

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

12-3-2017 04:08

Accord®

60" Seated Shower 72290100

• Frameless, 1/4-inch-thick (6mm) Clear tempered glass.

• Knob handle keeps the design line simple and unobstructed.

• Low threshold (1-3/4-inch) for easy entry and exit.

• CleanCoat® glass treatment repels water for improved ease of cleaning

• Magnetic seal keeps door firmly closed, providing excellent water containment.

• Out-of-Plumb adjustability for simple installation.

Material

• Anodized aluminum hardware prevents rusting or corrosion.

Installation

• Sliding shower door.

• Pre-assembled frame requires no cutting during installation. Codes/Standards• 1-inch width adjustability on each wall jamb (offering 2-inch total adjustability).

ANSI Z97.1 (Tempered Glass) CPSC 16CFR 1201• Filler sections (K-1296811) can be used to extend the width of an enclosure door by 5/8 inch. See website for detailed warranty information.

Components

Additional included component/s: Hardware Kit.

Available Color/Finishes Color tiles intended for reference only.

DescriptionCodeColor

SilverS

Available Glass Options DescriptionCode

ClearG05

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

11-14-2017 08:02

Whiston™

60" Sliding Door 572108-59

58-7/8" (1495 mm) Max

Install this product according to the installation instructions.

All product dimensions are nominal.

For shower base installationInstallation type:

The vertical opening should be a minimum of 75" (1905 mm) to allow for installation clearance.

56-7/8" (1445 mm)Opening Width - Min:

58-7/8" (1495 mm)Opening Width - Max:

25-5/8" (651 mm)Walk-through - Min:

25-5/8" (651 mm)Walk-through - Max:

1/4" (6 mm)Glass thickness:

CleanCoat®Glass coating:

USA/Canada: 1-800-STERLING (1-800-783-7546) Kohler Co. reserves the right to make revisions without notice to product specifications.

For the most current Specification Sheet, go to www.sterlingplumbing.com.

11-14-2017 08:02

Whiston™

60" Sliding Door 572108-59

SPEAKMAN

400 ANCHOR MILL ROAD

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

DECEMBER 2016

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

FEATURES:

• 6 plungers, 48 sprays

• Solid brass construction

• Spray adjusting handle

• 1/2 in. NPT inlet

• Patented plungers resist scale buildup

• 2.5 gpm (9.5 L/min) flow rate

FINISH:

OPTIONS: Add suffix to model #

• 2.0 gpm (7.6 L/min) flow rate ❑ -E2

• 1/2 in. British pipe thread inlet ❑ -BPT

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 compliant

• WaterSense certified (E2)

WARRANTY:

• Limited Lifetime Warranty (consumer use)

• 1 Year Limited (commerical use)

S-2252 Icon™ Shower Head

3 13 16 "

96mm

4" 101mm

1 9 16 "

40mm

1/2 NPT Female Supply Inlet

2 3 4"

70mm

PC PB ORBBN PN MB

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice.

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

JANUARY 2018

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

FEATURES

VALVE:

• Anti-scald protection

• Pressure balancing ceramic cartridge

• Adjustable temperature limit stop

• Integral stops

• 1/2” NPT female tub outlet

• 1/2” sweat shower outlet

• 1/2” sweat inlets

• Includes rough-in template

TRIM:

• Modern style

• Mounting plate with seal

• Metal handle

• Durable plastic trim plate

FINISH:

COMPLIANCE:

• ASME A112.18.1/CSA B125.1 certified

• Meets ASSE 1016

WARRANTY:

• 1 Year Limited

SM-1000-P

Neo™ Pressure Balance Valve and Trim

PC BN

NEW CASTLE, DE 19720

800-537-2107 800-977-2747

WWW.SPEAKMAN.COM

JANUARY 2018

Architect/Engineer Approval Space: P:

F:

W:

R:

Management Systems Registered to ISO 9001

DIMENSIONS: NOTE: 1. All dimensions are in inches (millimeters) unless otherwise specified and are subject to change without notice. 2. Unless otherwise specified, all inlets and outlets are 1/2” female copper sweat. 3. For ADA mounting locations, consult ADAAG, ANSI A117.1, or static regulations.

Contractor pack valves & trim kits available.

INSTRUCTIONS FOR MODELS

92-CPT-1000-P-02

For additional assistance or service please contact:

SPEAKMAN® Company 400 Anchor Mill Road New Castle, DE 19720

800-537-2107 customerservice@speakman.com www.speakman.com

CPT-1000-P

CPT-1001-KN

TOOLS AND SUPPLIES

Phillips Screwdriver

Measuring Tape

Additional warranty information can be found at:

www.speakman.com

WARRANTY

MAINTENANCE

Cover your drain to prevent loss of parts.

SAFETY TIPS

IMPORTANT

• Be sure to read instructions thoroughly before beginning installation.

• Do not over-tighten any connections or damage may occur.

• Be sure to have properly adjusted the Temperature Limiting Stop (TLS) as per the Valve Installation Instructions before installing Valve Trim.

Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty. Please be sure to only use approved cleaners. Please contact Speakman for any clarification of acceptable cleaners.

1 Clean wall surface. Place Mounting Base (1) onto the valve, align mounting holes, and secure with supplied screws (2).

2 There are two connectors included to allow for both Shallow Mount (Valve Centerline is 2.5-3.0” from finished wall surface) and Deep Mount (Valve Centerline is 3.0”-3.5” from finished wall surface) applications. Please select Connector appropriate for your installation.

For Deep Mount ApplicationFor Shallow Mount Application

3 Confirm that Valve is in the “Off” position. Place appropriate Connector on to the Spindle of the Valve, making sure to orient the Connector so that one set of Splines are in a perfectly vertical position.

Splines in Vertical Position

When installed correctly, the Connector (1) should protrude from the Mounting Base (2) in-between 5/16” and 1”. Secure Connector with 8-32 screw provided (3). If your installation does not fall within this range, try swapping Connectors.

IMPORTANT

5/16” to 1”

5 Place Escutcheon (1) on Mounting Base. Take care to orient the Escutcheon as shown below. 6 Align Handle Assembly with Connector (1) and Escutcheon as shown below. Keep Handle (2A) in a stationary vertical position and place over Connector (1) and engage the Splines of the Connector with the Handle Assembly. Keep Handle in the vertical position as you thread Handle Hub (2B) on to Mounting Base. Tighten until snug.

CPT-1000-P / CPT-1001-KN REPAIR PARTS SPEAKMAN®

RPG05-0874 SCREWS AND SPLINE ADAPTERS

RPG10-0093-XX (XX=FINISH) TRIM PLATE FOR CPT-1000-P

RPG10-104303-XX (XX=FINISH) TRIM PLATE FOR CPT-1001-KN (KNURLED)

RPG04-0388-XX (XX=FINISH) HANDLE ASSEMBLY FOR CPT-1000-P

RPG04-104314-XX (XX=FINISH) HANDLE ASSEMBLY FOR CPT-1001-KN (KNURLED)

RPG05-0948 1.5 GPM AERATOR ASSEMBLY WITH WRENCH

RPG63-0096 END BODY TO SPOUT - S/S BRAIDED HOSE CONNECTION

RPG24-0132 POLISHED NICKEL FINISH - ALL BRASS DRAIN ASSEMBLY

RPG24-0133 POLISHED BRASS FINISH - ALL BRASS DRAIN ASSEMBLY

ITEM NO. PART NO. DESCRIPTION

CPT-1000-P / CPT-1001-KN ROUGH-IN DIAGRAM SPEAKMAN®

DIMENSIONS SUBJECT TO CHANGE WITHOUT NOTICE.

VALVE MOUNTING IS SHOWN FOR REFERENCE ONLY.

VALVE IS NOT INCLUDED WITH

CPT-1000-P / CPT-1001-KN

1" 25mm

HOLE FOR

SHOWER ARM

5 1 2 "

140mm

HOLE FOR

VAVLE ACCESS

5 13 16 "

147mm

1'-9" [533mm]

4" [102mm]

TO TOP OF

TUB LEDGE

4'-6"

[1.4 METERS]

TO FLOOR

(SHOWER INSTALL ONLY)

6'-6"

[2 METERS]

TO FLOOR

1" 25mm

HOLE FOR

TUB SPOUT

A

A

2-1/2" [64mm] MINIMUM 3-1/2" [89mm] MAXIMUM

ROUGH IN DEPTH

3 7 16 "

87mm

SECTION A-A

R3 1 2 "

88.9mm 2"

50.4mm

2 "

12.7mm

3 1 2 "

88.4mm

16 "

23.6mm

8 "

22.6mm

2" 51mm

3 1 2 "

88.8mm

Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice

SPECIFICATION SHEET

TAG _______

* Regularly furnished unless otherwise specified.

Zurn Industries, LLC | Specification Drainage Operation 1801 Pittsburgh Avenue, Erie, PA U.S.A. 16502 · Ph. 855-663-9876, Fax 814-454-7929

In Canada | Zurn Industries Limited 3544 Nashua Drive, Mississauga, Ontario L4V 1L2 · Ph. 905-405-8272, Fax 905-405-1292 www.zurn.com

Rev. E Date: 09/25/2017 C.N. No. 137930 Prod. | Dwg. No. Z611

Z611

9 [229] MEDIUM-DUTY DRAIN

____ -VP Vandal-Proof Secured Top ____ -90 90º Side Outlet

(2 [51], 3 [76] Hub or Threaded Only)

OPTIONS (Check/specify appropriate options)

PIPE SIZE (Specify size/type) OUTLET 'E' BODY HT. DIM.

2, 3, 4 [51, 76, 102] ____ IP Threaded 5 [127] 2, 3, 4 [51, 76, 102] ____ NH No-Hub (IP w/ Z1040) 7-1/2 [191] 2, 3, 4 [51, 76, 102] ____ NL Neo-Loc 6-1/8 [156]

PREFIXES

____ Z D.C.C.I. Body and Top* ____ ZB D.C.C.I. Body w/Polished Bronze Top (Add 3/16 [5] to 2 [51] and 9 [229] Dim.)

____ ZN D.C.C.I. Body w/Polished Nickel Bronze Top (Add 3/16 [5] to 2 [51] and 9 [229] Dim.)

SUFFIXES

____ -AR Acid Resistant Epoxy Coated Cast Iron ____ -DG Duresist Grate ____ -G Galvanized Cast Iron ____ -LY (Less) Sediment Bucket ____ -P Trap Primer Connection ____ -S Secondary Strainer ____ -TC Neo-Loc Test Cap Gasket

(2, 3, 4 [51, 76, 102] NL Bottom Outlet Only) ____ -V Backwater Valve (See Z1099)

2, 3, 4 [51, 76, 102] 29 [13] 26 [168]

A Pipe Size In.[mm]

Approx.

Wt. Lbs.

[kg]

Grate Open Area Sq. In.

[cm2]

ENGINEERING SPECIFICATION: ZURN Z611

9" [229mm] Square top drain, Dura-Coated cast iron body with bottom outlet, seepage pan and combination membrane flashing clamp and frame for cast iron medium-duty slotted grate, with suspended sediment bucket.

PRODUCT FEATURES:

Materials of Construction: Metal construction for durability & long life.

Concealed Mounting: No exposed set screws.

Easy to Install

STUDIO S®

BATH ACCESSORIES

ROBE HOOK

MODEL NUMBER:

❏ 7105.210 - ROBE HOOK

SUGGESTED SPECIFICATION

Robe Hook shall feature metal construction. Shall feature concealed mounting with no exposed set screws. Robe Hook shall be American Standard Model # 7105.210.___.

2-15/16" (74 mm) 2"

(50 mm)

1-5/8" (41 mm)

4-1/16" (103 mm)

Available Finishes 002 Polished Chrome

295 PVD Brushed Nickel

© 2017 AS America, Inc.

8/17

PRODUCT FEATURES:

Materials of Construction: Metal construction for durability & long life.

Concealed Mounting: No exposed set screws.

Easy to Install

Easy to Use

STUDIO S®

BATH ACCESSORIES

TOILET PAPER HOLDER

MODEL NUMBER:

❏ 7105.230 - Toilet Paper Holder

SUGGESTED SPECIFICATION

Toilet Paper Holder shall feature metal construction. Shall feature concealed mounting with no exposed set screws.

Toilet Paper Holder shall be American Standard Model # 7105.230.___.

6-3/8" (162 mm)

2" (50 mm)

4-1/16" (103 mm)

2" (50 mm)

Available Finishes 002 Polished Chrome

295 PVD Brushed Nickel

© 2017 AS America, Inc.

8/17

2/2/2018 FV-05-11VKSL1_SpecSheet

1/2

MORE DET AILS Pr oduct Family Name WhisperGr eenSelect Fan/Light

Air Volume Exhaust (CFM) 50 @ 0.1" SP , 53 @ 0.25" SP , 80 @ 0.1" SP , 86 @ 0.25" SP , 110 @ 0.1" SP , 114

0.25" SP

Noise (Sones) 50 @ 0.1" SP = less than 0.3, 53 @ 0.25" SP = less than 0.3, 80 @ 0.1" SP = less than 0.3, 86 @

0.25" SP = 0.6, 1 10 @ 0.1" SP = 0.4, 1 14 @ 0.25" SP = 0.9

Power Consumption (W atts) 50 CFM = 4W , 80 CFM = 6.0W , 110 CFM = 11.1W, Energy Efficiency (CFM/W att) 50 CFM = 12.8CFM/W , 80 CFM = 13.3CFM/W , 110 CFM = 9.9CFM/W , Curr ent (Amps) 50 CFM = .04A, 80 CFM = .07A, 1 10 CFM = .12A, Power Rating (V/Hz) 120/60

Motor T ype (AC/DC) DC

Motion Sensor Optional

Humidity/Condensation Sensor Optional

Multi-Speed with T ime Delay Pr e-Installed

Duct Diameter 4" & 6"

Installation Ceiling

Radiation Damper A vailable Yes

Mounting Opening (in sq.) 10-1/2"

Grille Size (in sq.) 13"

Light T ype (CFL/LED) LED

Lamp W atts 2 x 7W

WhisperGreen Select™ FV-05-11VKSL1 50-80-110 CFM, Ceiling Mount Fan/Light, Pre- Installed Multi-Speed with Time Delay

FV-05-11VKSL1

2/2/2018 FV-05-11VKSL1_SpecSheet

2/2

Color T emperatur e (Kelvin) and Color Rendering Index (CRI) 3000K / >80 CRI

Lumens (lm) 550lm Per Lamp

Lamp Rated A verage Life (hrs.) 40000

Lamp Model # LPHT7

Night Light Optional

ENERGY ST AR® Certified YES

Other Appr oved Codes and Standards ASHRAE 62.2, LEED, CALGr een, California T itle 24, Washington

VIAQ

UL Listed for T ub/Shower Enclosur e when used with a GFCI Pr otected Cir cuit Yes

Warranty 6 Y ear DC Motor , 5 Year LED, 3 Y ear Parts

Master Carton Dimensions (HxWxD) 16-4/5" x 14-1/4" x 12

Master Carton Gr oss Weight (lbs.) 14.3

UPC885170179943

Blank Page