Attachment 11 Informational Volume 2-Appendices_Final Bridging Documents_CNRC.pdf

Final Bridging Documents Children’s Nutrition Research Center

TABLE OF CONTENTS TOC - i

DESIGN-BUILD REQUEST FOR PROPOSAL (D-B RFP)

TABLE OF CONTENTS

VOLUME 1 - SPECIFICATIONS

Division 01 – General Requirements

010100 General Requirements 011010 Statement of Work Part 1 – General

1.1 Related Documents and Provisions

1.2 Summary

1.3 Project Information

1.4 Phased Construction

1.5 Access to Site

1.6 Coordination with Occupants

1.7 Work Restrictions

1.8 Specification and Drawing Conventions

Part 2 – Description of Work Included

2.1 Project Overview and Description (Program Summary)

2.2 Civil/Site Work

2.3 Architectural

2.4 Interior Design

2.5 Structural

2.6 Heating, Ventilation and Air Cond0itioning

2.7 Plumbing

2.8 Fire Protection

2.9 Electrical

2.10 Telecommunications

2.11 Laboratory

Part 3 – Execution (Not Used)

013200 Construction Progress Documentation 013300 Submittal Procedures 013316 Design After Award 014000 Quality Requirements 015000 Temporary Facilities and Controls 016000 Product Requirements 017419 Construction Waste Management and Disposal 017700 Closeout Procedures 017823 Operation and Maintenance Data 017839 Project Record Documents 017900 Demonstration and Training 019113 MEP Commissioning Requirements

TABLE OF CONTENTS TOC - ii

Technical Specification

Division 02 – Existing Conditions

024119 Selective Demolition

Division 03 – Concrete

033053 Miscellaneous Cast-In-Place Concrete

Division 04 – Masonry

040120 Exterior Cleaning & Re-Caulking (Bid Option No. 3)

Division 05 – Metals

051200 Structural Steel Framing 055000 Metal Fabrications 055213 Pipe and Tube Railings

Division 06 – Wood, Plastics, and Composites

061000 Rough Carpentry

Division 07 – Thermal and Moisture Protection

070150.19 Preparation for Reroofing

075323 Ethylene-Propylene-Diene-Monomer (EPDM) Roofing 076200 Sheet Metal Flashing and Trim 077200 Roof Accessories 078413 Penetration Firestopping 078443 Joint Firestopping 079200 Joint Sealants

Division 08 – Openings

081213 Hollow Metal Frames 081416 Flush Wood Doors 087100 Door Hardware 088000 Glazing

Division 09 – Finishes

092216 Non-Structural Metal Framing 092900 Gypsum Board 093013 Ceramic Tiling 095113 Acoustical Tile Ceilings 096513 Resilient Base and Accessories 096519 Resilient Tile Flooring

TABLE OF CONTENTS TOC - iii

Division 09 – Finishes – Continued

096723 Resinous Flooring 096813 Carpeting 097200 Wall Coverings 098433 Sound-Absorbing Wall Units 099123 Interior Painting

Division 10 – Specialties

101100 Visual Display Boards 101200 Display Cases

102113.19 Plastic Toilet Compartments

102219 Demountable Partitions 102600 Surface Protection 102800 Toilet, Bath, and Laundry Accessories

Division 11 – Equipment

114000 Foodservice Equipment 115313 Fume Hoods 115314 Biosafety Cabinets 115343 Laboratory Service Fixtures

Division 12 – Furnishings

123554 Metal Laboratory Casework 126100 Fixed Audience Seating

Division 14 – Conveying Systems

142400 Traction Elevators

Division 21 – Fire Suppression

211313 Wet-Pipe Sprinkler Systems 212200 Clean-Agent Fire-Extinguishing Systems

Division 22 – Plumbing

220523 Valves for Plumbing Piping 220529 Hangers and Supports for Plumbing Piping and Equipment 220719 Plumbing Piping Insulation 221116 Domestic Water Piping 221119 Domestic Water Piping Specialties 221316 Sanitary Waste and Vent Piping 221319 Sanitary Drains and Cleanouts 221413 Facility Storm Drainage Piping

TABLE OF CONTENTS TOC - iv

Division 22 – Plumbing – Continued

224213.13 Commercial Water Closets and Urinals

224216.16 Commercial Sinks

224500 Emergency Plumbing Fixtures 224716 Pressure Water Coolers 226113 Gas and Vacuum Piping for Laboratory Facilities 226600 Chemical-Waste Systems for Laboratory Facilities

Division 23 – Heating, Ventilating, and Air Conditioning (HVAC)

230130.52 Existing HVAC Air Distribution System Cleaning

230513 Common Motor Requirements for HVAC Equipment 230517 Sleeves and Sleeve Seals for HVAC Piping 230519 Meters and Gages for HVAC Piping

230523.12 Ball Valves for HVAC Piping

230523.14 Check Valves for HVAC Piping

230523.15 Gate Valves for HVAC Piping

230529 Hangers and Supports for HVAC Piping and Equipment

230548.13 Vibration Controls for HVAC

230553 Identification for HVAC Piping and Equipment 230593 Testing, Adjusting, and Balancing for HVAC 230713 Duct Insulation 230719 HVAC Piping Insulation 230923 Direct Digital Control (DDC) System for HVAC 232113 Hydronic Piping 232116 Hydronic Piping Specialties 232213 Steam and Condensate Heating Piping 232216 Steam and Condensate Heating Piping Specialties 233113 Metal Ducts 233300 Air Duct Accessories 233346 Flexible Ducts 233416 Centrifugal HVAC Fans 233600 Air Terminal Units

233713.13 Air Diffusers

233713.23 Air Registers and Grilles

237313 Indoor Central-Station Air-Handling Units 238219 Fan Coil Units

Division 26 – Electrical

260519 Low-Voltage Electrical Power Conductors and Cables 260523 Control-Voltage Electrical Power Cables 260526 Grounding and Bonding for Electrical Systems 260529 Hangers and Supports for Electrical Systems 260533 Raceways and Boxes for Electrical Systems 260553 Identification for Electrical Systems 260574 Overcurrent Protective Device Arc-Flash Study 260923 Lighting Control Devices

TABLE OF CONTENTS TOC - v

Division 26 – Electrical – Continued

262416 Panelboards 262726 Wiring Devices 262816 Enclosed Switches and Circuit Breakers

262913.03 Manual and Magnetic Motor Controllers

262923 Variable-Frequency Motor Controllers 263600 Transfer Switches 264113 Lightning Protection for Structures 265119 LED Interior Lighting 265219 Exit Lighting 265619 LED Exterior Lighting

Division 27 – Communications

270526 Grounding and Bonding for Communications Systems 270528 Pathways for Communications Systems

270528.29 Hangers and Supports for Communications Systems

271100 Communications Equipment Room Fittings 271313 Communications Copper Backbone Cabling 271323 Communications Optical Fiber Backbone Cabling 271513 Communications Copper Horizontal Cabling

Division 28 – Electronic Safety and Security

283111 Digital, Addressable Fire-Alarm System

Division 31 – Earthwork

312000 Earth Moving

Division 32 – Exterior Improvements

321313 Concrete Paving 321400 Unit Paving 323200 Perforated Metal Panels

VOLUME 2 – APPENDICES

Appendix A – Existing Building Drawings (electronic pdfs only) Appendix B – Conceptual Drawings (bound separately) Appendix C – Texas Medical Center Architectural Standards Appendix D – Interior Finish Plans Appendix E – Food Service Equipment Cutsheets Appendix F – Floodgate Vendor Information Appendix G – Hazardous Materials Survey Appendix H – Hood Schedule

TABLE OF CONTENTS TOC - vi

I:\Projects\3018404\3018404_0001\70_Specifications\Final Bridging Documents\Table of Contents.docx

VOLUME 3 – SUPPLEMENTAL INFORMATION (for USDA use only)

Waiver Request Letter HVAC Equipment Cutsheets HVAC Preliminary Calculations Design A/E Checklist CNRC Renovations 15% Presentation (electronic pdf only) CN-001 15% Presentation November 2016 15% Presentation Project Review Comments 35% Review Comments with Responses Construction Cost Estimate (under separate cover)

APPENDIX A

EXISTING BUILDING DRAWINGS

(ELECTRONIC PDFS ONLY)

A

PPE

N D

IX

A

– E X

IST

IN

G B

U

IL

D

IN

G D

R A

W

IN

G S (E

L E

C T

R O

N

IC

PD

FS O

N L

Y

APPENDIX B

CONCEPTUAL DRAWINGS

(BOUND SEPARATELY)

N D

IX

B

– C O

N C

E

PT

U A

L D

R A

W

IN

G S (B

O U

N D

SE

PA

R A

T E

L

APPENDIX C

TEXAS MEDICAL CENTER

ARCHITECTURAL STANDARDS

N D

IX

C

– T E

X A

S M E

D

IC

A L

C E

N T

E R

A R

C H

IT

E

C T

U R

A L

ST

A

N D

A R

D S

APPENDIX D

INTERIOR FINISH PLANS

N D

IX

D

– IN

T

E R

IO

R

FIN

ISH

PL

A

N

APPENDIX E

FOOD SERVICE EQUIPMENT CUTSHEETS

N D

IX

E

– FO

O

D

SE

R V

IC

E

E Q

U

IPM

E N

T C

U T

SH

E

ET

www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

For Orders & Customer Service:

Email: customer@advancetabco.com or Fax: 631-242-6900

For Smart Fabrication™ Quotes:

Email: smartfab@advancetabco.com or Fax: 631-586-2933

STAINLESS STEEL

SPECLINE 14 Ga. Fabricated Sinks Triple Compartments

FEATURES:

Full Skirt Design Backsplash has tile edge for ease of installation.

Sink bowls are 3/4” coved corner and meet NSF requirements.

Rolled Rim Edge for additional strength.

Sink Bowls are 14” deep for greater capacity.

Stainless Steel Legs and Cross Bracing.

CONSTRUCTION:

All TIG welded.

Welded areas blended to match adjacent surfaces and to a satin fi nish.

MATERIAL:

1 5/8” diameter stainless steel legs with 1” adjustable stainless steel bullet feet.

Entire unit is 14 gauge 304 stainless steel.

Stainless Steel Gussets.

MECHANICAL:

• Supply is 1/2” IPS hot & cold.

• Faucet holes on 8” centers.

• Faucets are not included (see accessories).

• Waste drains are 1 1/2” IPS S/S basket type, located in center of sink bowl, and are included.

DRAINS

FAUCETS

ACCESSORIES Model # Qty

† Requires Two Faucets

MODEL # BOWL

SIZE

O.A.

Length

# of Drbds.

FS-3-1620 16” x 20” 53” 0 FS-3-1620-18R or L 16” x 20” 68.5” 1 FS-3-1620-18RL 16” x 20” 84” 2 FS-3-1620-24RL 16” x 20” 96” 2 FS-3-1620-36RL 16” x 20” 120” 2 FS-3-1524 15” x 24” 50” 0 FS-3-1524-24R or L 15” x 24” 71.5” 1 FS-3-1524-24RL 15” x 24” 93” 2 FS-3-1818 18” x 18” 59” 0 FS-3-1818-18R or L 18” x 18” 74.5” 1 FS-3-1818-18RL 18” x 18” 90” 2 FS-3-1824 18” x 24” 59” 0 FS-3-1824-18R or L 18” x 24” 74.5” 1 FS-3-1824-24R or L 18” x 24” 80.5” 1 FS-3-1824-18RL 18” x 24” 90” 2 FS-3-1824-24RL 18” x 24” 102” 2 FS-3-2024 20” x 24” 65” 0 FS-3-2024-24R or L 20” x 24” 86.5” 1 FS-3-2024-24RL 20” x 24” 108” 2 † FS-3-2424 24” x 24” 77” 0 † FS-3-2424-18R or L 24” x 24” 92.5” 1 † FS-3-2424-24R or L 24” x 24” 98.5” 1 † FS-3-2424-18RL 24” x 24” 108” 2 † FS-3-2424-24RL 24” x 24” 120” 2

REF-E

Item #: Qty #:

Model #:

Project #:

shappeTD Text Box

CUSTOM CONFIGURATION REQUIRED

TO MEET PLAN CONFIGURATION

shappeTD Rectangle

200 Heartland Boulevard, Edgewood, NY 11717-8380

ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, OCTOBER 2016

DIMENSIONS and SPECIFICATIONS TOL Overall: ± .500” ALL DIMENSIONS ARE TYPICAL

Interior: ± .250”

LL

AC

B W

L

C A

B W

WB

A

3 COMP - 2 DRBDs3 COMP - 1 DRBD3 COMP - NO DRBDS

MODEL # Length L

Width W

Bowl Size A & B

Drbd. Length C

# of Drbds.

Drbd.

Location

Wt Cu.

FS-3-1620 53” 26” 16” x 20” 0 0 None 140 lbs 27

FS-3-1620-18R or L 68.5” 26” 16” x 20” 18” 1 Specify 160 lbs 35

FS-3-1620-18RL 84” 26” 16” x 20” 18” 2 Both 155 lbs 36

FS-3-1620-24RL 96” 26” 16” x 20” 24” 2 Both 235 lbs 47

FS-3-1824-36RL 120” 26” 16” x 20” 36” 2 Both 280 lbs 59

FS-3-1524 50” 30” 15” x 24” 0 0 None 116 lbs 31 FS-3-1524-24R or L 71.5” 30” 15” x 24” 24” 1 specify 139 lbs 44

FS-3-1524-24RL 93” 30” 15” x 24” 24” 2 Both 163 lbs 56

FS-3-1818 59” 24” 18” x 18” 0 0 None 130 lbs 25

FS-3-1818-18R or L 74.5” 24” 18” x 18” 18” 1 Specify 150 lbs 31

FS-3-1818-18RL 90” 24” 18” x 18” 18” 2 Both 170 lbs 52

FS-3-1824 59” 30” 18” x 24” 0 0 None 158 lbs 36

FS-3-1824-18R or L 74.5” 30” 18” x 24” 18” 1 Specify 174 lbs 46

FS-3-1824-24R or L 80.5” 30” 18” x 24” 24” 1 Specify 187 lbs 49

FS-3-1824-18RL 90” 30” 18” x 24” 18” 2 Both 310 lbs 54

FS-3-1824-24RL 102” 30” 18” x 24” 24” 2 Both 375 lbs 61

FS-3-2024 65” 30” 20” x 24” 0 0 None 165 lbs 40

FS-3-2024-24R or L 86.5” 30” 20” x 24” 24” 1 Specify 182 lbs 52

FS-3-2024-24RL 108” 30” 20” x 24” 24” 2 Both 198 lbs 64 † FS-3-2424 77” 30” 24” x 24” 0 0 None 329 lbs 47 † FS-3-2424-18R or L 92.5” 30” 24” x 24” 18” 1 Specify 353 lbs 56 † FS-3-2424-24R or L 98.5” 30” 24” x 24” 24” 1 Specify 369 lbs 59 † FS-3-2424-18RL 108” 30” 24” x 24” 18” 2 Both 382 lbs 64 † FS-3-2424-24RL 120” 30” 24” x 24” 24” 2 Both 405 lbs 71

† Requires Two Faucets

FINISHED

FLOOR

1 1/2"

20 1/2

(CLEAR)

DRAIN

43"

8 1/2"

16 1/2" (Flood Level)

37" (Working Height)

38" (Faucet)

LINE

WASTE

TO

Stainless Steel Bullet Feet 1" Adjustable

3 3/16"

14" (Water Level)

2"

SECTION

FINISHED

FLOOR

1 1/2"

20 1/2

(CLEAR)

DRAIN

43"

8 1/2"

16 1/2" (Flood Level)

37" (Working Height)

38" (Faucet)

LINE

WASTE

TO

Stainless Steel Bullet Feet 1" Adjustable

3 3/16"

*14" (Water Level)

*15” x 15” Bowls are 12” Deep

2"

PLUMBING ROUGH-IN

REF-E

LL

AC

B W

L

C A

B W

WB

A

LL

AC

B W

L

C A

B W

WB

Item #: Qty #:

Model #:

Project #:

STAINLESS STEEL

HAND SINKS

OPERATED FAUCETS

B-6

7-PS-51

7-PS-61

7-PS-91

FEATURES:

One piece Deep Drawn sink bowl design.

Sink bowl is 10" x 14" x 5".

“Hands Free" Electronic Faucet makes use of infrared technology to sense the user’s presence and immediately turn on water supply that is pre-mixed to desired temp.

Standard Electronic gooseneck faucet is splash mounted and comes complete with AC/DC control module, sensor, 4 “AA" batteries and spout.

All sink bowls have a large liberal radii with a minimum dimension of 2" and are rectangular in design for increased capacity.

Keyhole wall mount bracket.

Stainless steel basket drain 1 1/2" IPS.

Specific Features:

7-PS-51 & 7-PS-81 lever operated drain and built-in overflow with plastic overflow tube and spring clamps. P-Trap is 1 1/2".

7-PS-81 towel dispenser with hinged towel box. Unit uses standard C-fold towels. Liquid Soap dispenser.

7-PS-91 pedestal skirt.

CONSTRUCTION:

All TIG welded.

Welded areas blended to match adjacent surfaces and to a satin finish.

Die formed Countertop Edge with a 3/8" No-Drip offset.

One sheet of stainless steel - No Seams.

MATERIAL:

Heavy gauge type 304 series stainless steel.

Electronic Faucet solid brass, chrome plated.

Wall mounting bracket is stainless steel and of offset design.

All fittings are brass / chrome plated unless otherwise indicated.

MECHANICAL:

Electronic faucet is 1/2" male IPS thread.

K-175 Replacement Electronic Operated Faucet.

NEW YORK GEORGIA TEXAS NEVADA

Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933

Keyhole Bracket for easier installation and greater stability.

7-PS-81

For Replacement Faucets & Upgrades, Drains & Accessories visit our website at www.advancetabco.com

Standard Faucet conforms to NSF 61 Standard 9.

Faucets Are AB1953 Lead Free Compliant.

improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, AUGUST 2013

DIMENSIONS and SPECIFICATIONS

B-6a

8"

5"

13"

"P-Trap

Lever DrainLC

CL

Electronic Faucet

13" 8"

5"

15 1/2"

2"

Basket Drain

Soap Dispenser Towel Dispenser

Lever Drain

P-Trap

13" 8"

5"

26 1/2"

Pedestal Base

42"

34"

8" 2"

37 1/2"

LC

7-PS-61

17 1/4"

15 1/4"

7-PS-81 7-PS-91

TOP VIEW for 7-PS-81 TOP VIEW for 7-PS-61, 7-PS-81 & 7-PS-91

21 lbs.

32 lbs. 41 lbs.

19 lbs.

TOL Overall: ± .500" Interior: ± .250" FITTINGS SUPPLIED AS SHOWN ALL DIMENSIONS ARE TYPICAL

7-PS-51

17 1/4"

15 1/4"

E

Sink Bowl 10" x 14" x 5"

FLOOR UNITS

FEATURES:

Floor mounted unit eliminates the need of lifting heavy containers.

Tile edge furnished on the rear.

Bowls rectangular in design for increased capacity.

K-16 Free Flow Drain is included with each mop sink.

CONSTRUCTION:

All TIG welded.

Welded areas blended to match adjacent surfaces and to a satin finish.

MATERIAL:

16 Gauge type “304" series stainless steel sink bowl.

18 Gauge type “304" series stainless steel sink apron.

FEATURES:

Leg mounted design.

High back splash.

3 1/2” Basket Drain Inlcuded

CONSTRUCTION:

All TIG welded.

Welded areas blended to match adjacent surfaces and to a satin finish.

MATERIAL:

4-OP-18 - Heavy gauge type “304" series stainless steel.

8-OP-16 - 18 gauge type “304” series stainless steel.

Item #: Qty #:

Model #:

Project #:

STAINLESS STEEL

FABRICATED SERVICE & MOP SINKS

E-9

NEW YORK GEORGIA TEXAS NEVADA

Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933

9-OP-20 Shown

Conventional

Economy

8-OP-16

4-OP-18

9-OP-40 Shown

Approx.

MODEL L x W x H Wt.

K-243 32” x 4” x 6” 13 lbs.

• 16 Gauge, 300 Series Stainless Steel

• Includes Cast 1/2” Drain & Plastic Hose

• Wall Mounted (Hardware not Included)

• 2” Tray Height with 6” Rear Splash (Overall Height)

UTILITY SHELF - 8” WIDE

inches mm MODEL Approx Approx

Wt Cubes

24” 610 K-245 12 lbs. 1

36” 914 K-246 15 lbs. 2

SERVICE & MOP SINK ACCESSORIES

K-244 HOSE & HANGER

STANDING UNITS

MOP DRAINAGE TRAY

Height Above MODEL Fits Units: Finished Floor (A.F.F.)

K-288LorR 9-OP-20 26”

9-OP-40 32”

K-290LorR 9-OP-28 26”

9-OP-48 32”

Splashes Available on All 3 Sides

K-298 9-OP-20 26”

9-OP-40 32”

K-299 9-OP-28 26”

9-OP-48 32”

16” HIGH SIDE & BACK

SPLASHES FOR

9-OP SERIES MOP SINKS

16 Gauge, 300 Series Stainless Steel

Available with Back & Left Side, Back & Right Side or Back & Both Sides

(Mounting Hardware Included)

K-240

SERVICE FAUCET*

K-16 FLOOR

MOP SINK

REPLACEMENT

DRAIN

K-242 MOP HANGER - 23” Wide

FLOW RATE

9.6 GPM/

36.3 LPM

8” O.C.

9-OP-40DF Shown

Notched Out Front Allows Ease of Emptying Mop Bucket

Fabricated Bowls are Welded Together at the Seams

*Does not meet Federal Lead Free Standards as it is not intended for potable water.

improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, NOVEMBER 2013

DIMENSIONS

TOL Overall: ± .500" ALL DIMENSIONS ARE TYPICAL

Interior: ± .250"

E-9a

10 1 2 "

21"

25"

L C

33"

25"

2"

CL

10 1 2 "

21"

25"

L C

Rubber Gasket

Fiber Washer

Die Cast Nut

Exterior Thread Interior Thread

Interior Rubber Bladder

Interior Compression Ring

Flat Strainer Plat

9-OP-20

9-OP-40

9-OP-20: 16" x 20" x 6" Bowl with 10" Overall Height. Wt. 26 lbs.

9-OP-28: 20" x 28" x 6" Bowl with 10" Overall Height. Wt. 35 lbs.

9-OP-40: 16" x 20" x12" Bowl with 16" Overall Height. Wt. 45 lbs.

9-OP-48: 20" x 28" x 12" Bowl with 16" Overall Height. Wt. 63 lbs.

9-OP-40DF: 16" x 20" x12" Bowl with 16" Overall Height. Wt. 45 lbs.

9-OP-48DF: 20" x 28" x 12" Bowl with 16" Overall Height. Wt. 63 lbs.

8-OP-16

CONVENTIONAL DESIGN

SUGGESTED INSTALLATION

MOP SINK DRAIN ASSEMBLY

4-OP-18

ECONOMY DESIGN

1 1/2" IPS

2 3

2" IPS Pipe

30"

6"

15"

6"

3"

2"

1/4" x 1 1/2" Slotted Mounting Holes

1/2" IPS Drain

LCLC

K-243 MOP DRAINAGE TRAY

13 lbs.

9-OP-28

9-OP-48

33"

25"

2 "

C L 9-OP-48DF9-OP-40DF

Project #:

VKS-Series:

Stainless Steel Legs & Undershelf

VKS-240

VKS-242

VKS-243

VKS-244

VKS-245

VKS-246

VKS-247

VKS-248

VKS-249

VKS-2410

VKS-2411

VKS-2412

VKS-300

VKS-302

VKS-303

VKS-304

VKS-305

VKS-306

VKS-307

VKS-308

VKS-309

VKS-3010

VKS-3011

VKS-3012

VKS-363

VKS-364

VKS-365

VKS-366

VKS-367

VKS-368

VKS-369

VKS-3610

VKS-3611

VKS-3612

24” 30” 36” Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

VKG-Series:

Galvanized Steel Legs & Undershelf

VKG-240

VKG-242

VKG-243

VKG-244

VKG-245

VKG-246

VKG-247

VKG-248

VKG-249

VKG-2410

VKG-2411

VKG-2412

VKG-300

VKG-302

VKG-303

VKG-304

VKG-305

VKG-306

VKG-307

VKG-308

VKG-309

VKG-3010

VKG-3011

VKG-3012

VKG-363

VKG-364

VKG-365

VKG-366

VKG-367

VKG-368

VKG-369

VKG-3610

VKG-3611

VKG-3612

24” 30” 36” Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

STAINLESS STEEL

WORK TABLES

SPEC-LINE Series - 10” Backsplash - Undershelf Style

J-1

FEATURES:

Top is furnished with a 2” x 1” square die embossed NO-DRIP countertop edge with a 1/2” return on 3 sides and a 10” splash of with a 2” return on the rear side.

24” wide tables supplied with TWO hat channels stud welded to reinforce and maintain a level working surface. 30” and 36” wide tables supplied with THREE hat channels.

Pre-engineered welded angle adapters insure ease of future drawer installation.

Aluminum die cast “leg-to-shelf” clamp secures shelf to leg eliminating unsightly nuts and bolts. Undershelf is adjustable.

CONSTRUCTION:

All TIG welded. Exposed weld areas polished to match adjacent surfaces.

Entire top mechanically polished to a satin finish. Countertop edge polished to a MIRROR finish.

Top is sound deadened.

Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs.

Gussets welded to support hat sections.

MATERIAL:

VKS-SERIES: Stainless Steel Legs & Undershelf

TOP: 14 gauge stainless steel type “304” series.

SHELF: 18 gauge stainless steel.

LEGS: 1 5/8” diameter tubular stainless steel type “304” series.

1” adjustable stainless steel bullet feet.

Stainless steel gussets.

VKG-SERIES: Galvanized Legs & Undershelf

TOP: 14 gauge stainless steel type “304” series.

SHELF: 18 gauge galvanized steel.

LEGS: 1 5/8” diameter tubular galvanized steel.

1” adjustable plastic bullet feet.

Galvanized steel gussets.

Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K)

Featuring as Standard:

“THE PROVEN”

ORIGINAL ADVANCE TABCO

Adjustable Undershelf with Die Cast Leg Clamp

No-Drip DIE FORMED EDGE offers the Ultimate in Design & Function.

NEW YORK GEORGIA TEXAS NEVADA

Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933 shappeTD Rectangle improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, APRIL 2007

DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL TOL ± .500” All Units Shipped Unassembled (KD) for Reduced Shipping Costs.

J-1a

VKS-Series: Stainless Steel Legs & Undershelf

VKS-240

VKS-242

VKS-243

VKS-244

VKS-245

VKS-246

VKS-247

VKS-248

VKS-249

VKS-2410

VKS-2411

VKS-2412

VKS-300

VKS-302

VKS-303

VKS-304

VKS-305

VKS-306

VKS-307

VKS-308

VKS-309

VKS-3010

VKS-3011

VKS-3012

VKS-363

VKS-364

VKS-365

VKS-366

VKS-367

VKS-368

VKS-369

VKS-3610

VKS-3611

VKS-3612

24” Wt. 30” Wt. 36” Wt.

Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

55 lbs.

50 lbs.

66 lbs.

81 lbs.

95 lbs.

113 lbs.

135 lbs.

150 lbs.

165 lbs.

268 lbs.

301 lbs.

316 lbs.

70 lbs.

56 lbs.

77 lbs.

92 lbs.

111 lbs.

129 lbs.

153 lbs.

171 lbs.

289 lbs.

294 lbs.

331 lbs.

346 lbs.

92 lbs.

101 lbs.

121 lbs.

142 lbs.

169 lbs.

189 lbs.

260 lbs.

315 lbs.

358 lbs.

373 lbs.

VKG-Series: Galvanized Steel Legs & Undershelf

VKG-240

VKG-242

VKG-243

VKG-244

VKG-245

VKG-246

VKG-247

VKG-248

VKG-249

VKG-2410

VKG-2411

VKG-2412

VKG-300

VKG-302

VKG-303

VKG-304

VKG-305

VKG-306

VKG-307

VKG-308

VKG-309

VKG-3010

VKG-3011

VKG-3012

VKG-363

VKG-364

VKG-365

VKG-366

VKG-367

VKG-368

VKG-369

VKG-3610

VKG-3611

VKG-3612

24” Wt. 30” Wt. 36” Wt.

Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

55 lbs.

50 lbs.

66 lbs.

81 lbs.

95 lbs.

113 lbs.

135 lbs.

150 lbs.

165 lbs.

268 lbs.

301 lbs.

316 lbs.

70 lbs.

56 lbs.

77 lbs.

92 lbs.

111 lbs.

129 lbs.

153 lbs.

171 lbs.

195 lbs.

294 lbs.

331 lbs.

346 lbs.

92 lbs.

101 lbs.

121 lbs.

142 lbs.

169 lbs.

189 lbs.

260 lbs.

315 lbs.

358 lbs.

373 lbs.

VKS & VKG Series Undershelf Style

10” Backsplash

Units 8ft. and larger are furnished with six (6) legs

COUNTERTOP

EDGE

DETAIL

Finished size of undershelf = Length minus 5 3/4” Width minus 5 3/4”

Welded Sinks Into Table Top Fabricated Sink Bowls

Item #: Qty #:

Model #:

Project #:

REF-K

www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

For Orders & Customer Service:

Email: customer@advancetabco.com or Fax: 631-242-6900

For Smart Fabrication™ Quotes:

Email: smartfab@advancetabco.com or Fax: 631-586-2933

ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, MARCH 2017

Single Bowl Double Bowl Size

Model# Model# A B

TA-11A** TA-11A-2** 16” x 20” x 8” TA-11B** TA-11B-2** 16” x 20” x 12” TA-11C* TA-11C-2* 20” x 20” x 8” TA-11D* TA-11D-2* 20” x 20” x 12” TA-11E* TA-11E-2* 24” x 24” x 14” TA-11F TA-11F-2† 10” x 14” x 10” TA-11J TA-11J-2 14” x 16” x 12” TA-11L TA-11L-2 18” x 24” x 14” TA-11N TA-11N-2 18” x 18” x 14” TA-11P* TA-11P-2* 20” x 24” x 14” TA-11Q TA-11Q-2 10” x 14” x 5” TA-11R* TA-11R-2* 24” x 36” x 14” TA-11S* TA-11S-2* 20” x 30” x 14” TA-11T* TA-11T-2* 24” x 30” x 14”

* Only Installed In Tables 30” Wide or Wider ** Bowls Are Turned In 24” Wide Tables † K-50 Swing Spout Faucet (Double Bowl)

2"

8" O.C.

B

6"

4" O.C.

1"

A

4"

24" Wide Flat Top 5” REAR SPLASH with 1” RETURN

Splash Mount Faucet (VKS Series Shown)

Deck Mount (KSS Series Shown)

A

4" O.C.

3"

6" 1"

2"

10” REAR SPLASH with RETURN

2"

A3"

B

6"

6"

4" O.C.

B

A3"

4" O.C.

30” WIDE FLAT TOP

6"

B

A3"

6"

A3"

5” REAR SPLASH with 1” RETURN

2"

8" O.C.

B

6"

4" O.C.

1"

A

4"

24" Wide Flat Top 5” REAR SPLASH with 1” RETURN

Splash Mount Faucet (VKS Series Shown)

Deck Mount (KSS Series Shown)

A

4" O.C.

3"

6" 1"

2"

10” REAR SPLASH with RETURN

2"

A3"

B

6"

6"

4" O.C.

B

A3"

4" O.C.

30” WIDE FLAT TOP

6"

B

A3"

6"

A3"

2"

8" O.C.

B

6"

4" O.C.

1"

A

4"

24" Wide Flat Top 5” REAR SPLASH with 1” RETURN

Splash Mount Faucet (VKS Series Shown)

Deck Mount (KSS Series Shown)

A

4" O.C.

3"

6" 1"

2"

10” REAR SPLASH with RETURN

2"

A3"

B

6"

6"

4" O.C.

B

A3"

4" O.C.

30” WIDE FLAT TOP

6"

B

A3"

6"

A3"

FLAT TOP, 1” or 1-1/2” REAR SPLASH 10” REAR SPLASH with 2” RETURN

Includes Lead Free Compliant Faucet & K-6 Basket Drain(s)

Flat Top, 1”, 1-1/2” & 5 Backsplash Include Deck Mount Faucet

• Single Sink Bowl provided with K-50 Swing Spout Faucet

• Double Sink Bowls provided with K-53 Swing Spout Faucet

10” Backsplash Include Splash Mount Faucet

• Single & Double Sink Bowls provided with K-1 Swing Spout Faucet Splash Mount Faucet Available On 5” Backsplash - Add TA-11Z

10” Backsplash w/ K-1

Splash Mount Faucet Shown

Flat Top w/ K-50

Deck Mount Faucet Shown

Faucets & Accessories _____ K-2B Poly-Vance Sink Cutting Board for 14” x 16” Bowls _____ K-2C Poly-Vance Sink Cutting Board for 16” x 20” Bowls _____ K-2D Poly-Vance Sink Cutting Board for 18” x 24” Bowls _____ K-2E Poly-Vance Sink Cutting Board for 20” x 20” Bowls _____ K-2F Poly-Vance Sink Cutting Board for 24” x 24” Bowls _____ K-2J Poly-Vance Sink Cutting Board for 18” x 18” Bowls _____ K-4 Lever Drain Bracket _____ K-5 Lever Drain _____ K-12 Deck Mounted Soap Dispenser _____ K-15 Lever Drain With Overflow _____ K-50 8” Deck Mounted 4” O.C. Swing Spout Faucet _____ K-50OMIT Omit Swing Spout _____ K-52 3 1/2” Spout Deck Mounted 4” O.C. Gooseneck Faucet _____ K-52OMIT Omit Swing Spout Gooseneck Faucet _____ K-53 12” Deck Mounted 4” O.C. Swing Spout Faucet _____ K-54 8-1/4” Water Filler Faucet _____ K-54A 12” Water Filler Faucet

_____ K-55 8 1/2” Spout 4” O.C. Deck Mounted Gooseneck Faucet _____ K-60 4” O.C. Splash Mounted Gooseneck Faucet _____ K-62 X.H.D. 4” O.C. Deck Mounted Gooseneck Faucet _____ K-105 14” Splash Mounted 8” O.C. Faucet _____ K-112 Extra Heavy Duty 12” Splash Mounted Faucets _____ K-316-LUHA Wrist Handles For Splash Mounted Faucets _____ K-350 Residential Finish & Packaging _____ K-452 6” x 9” Control Bracket _____ K-453 14” x 16” Control Bracket _____ K-460 Installation Of Disposal Cone w/ 6” x 9” Control Bracket _____ K-461 Installation Of Collar w/ 6” x 9” Control Bracket _____ K-470 14” Deep Bowls _____ K-472 Faucet Hole Revision

_____ DTA-100 Prerinse Basket for 20” x 20” Bowls

_____ DTA-125 Prerinse Basket for 16” x 20” Bowls

Project #:

STAINLESS STEEL

WORK TABLES

SPEC-LINE Series - Flat Top - UNDERSHELF Style

H-1

FEATURES:

Top is furnished with a 2” x 1” square die embossed NO-DRIP countertop edge with a 1/2” return on 4 sides.

To reinforce and maintain a level working surface, 24” wide tables are supplied with TWO hat channels and 30” and 36” wide tables are supplied with THREE hat channels.

Pre-engineered welded angle adapters insure ease of future drawer installation.

Aluminum die cast “leg-to-shelf” clamp secures shelf to leg eliminating unsightly nuts & bolts. Undershelf is adjustable.

CONSTRUCTION:

All TIG welded. Exposed weld areas polished to match adjacent surfaces.

Entire top mechanically polished to a satin finish. Countertop edge polished to a MIRROR finish.

Top is sound deadened.

Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs.

Gussets welded to support hat sections.

NEW YORK GEORGIA TEXAS NEVADA

Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578www.advancetabco.com

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933

MATERIAL:

VSS-SERIES: Stainless Steel Legs & Undershelf

TOP: 14 gauge stainless steel type “304” series.

SHELF: 18 gauge stainless steel.

LEGS: 1 5/8” diameter tubular, 16 gauge stainless steel type “304” series.

1” adjustable stainless steel bullet feet.

Stainless steel gussets.

VLG-SERIES: Galvanized Legs & Undershelf

TOP: 14 gauge stainless steel type “304” series.

SHELF: 18 gauge galvanized steel.

LEGS: 1 5/8” diameter tubular galvanized steel.

1” adjustable plastic bullet feet.

Galvanized steel gussets.

Featuring as Standard:

“THE PROVEN”

ORIGINAL ADVANCE TABCO

Adjustable Undershelf with Die Cast Leg Clamp

No-Drip DIE FORMED EDGE offers the Ultimate in Design & Function.

VSS-240

VSS-242

VSS-243

VSS-244

VSS-245

VSS-246

VSS-247

VSS-248

VSS-249

VSS-2410

VSS-2411

VSS-2412

VSS-300

VSS-302

VSS-303

VSS-304

VSS-305

VSS-306

VSS-307

VSS-308

VSS-309

VSS-3010

VSS-3011

VSS-3012

VSS-363

VSS-364

VSS-365

VSS-366

VSS-367

VSS-368

VSS-369

VSS-3610

VSS-3611

VSS-3612

24” 30” 36” Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

VLG-Series:

Galvanized Steel Legs & Undershelf

VLG-240

VLG-242

VLG-243

VLG-244

VLG-245

VLG-246

VLG-247

VLG-248

VLG-249

VLG-2410

VLG-2411

VLG-2412

VLG-300

VLG-302

VLG-303

VLG-304

VLG-305

VLG-306

VLG-307

VLG-308

VLG-309

VLG-3010

VLG-3011

VLG-3012

VLG-363

VLG-364

VLG-365

VLG-366

VLG-367

VLG-368

VLG-369

VLG-3610

VLG-3611

VLG-3612

24” 30” 36” Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

VSS-Series:

Stainless Steel Legs & Undershelf

Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K) shappeTD Rectangle improving our products. Therefore, we reserve the right to change specifications without prior notice.

© ADVANCE TABCO, MARCH 2006

DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL TOL ± .500” All Units Shipped Unassembled (KD) for Reduced Shipping Costs.

H-1a

VSS-Series: Stainless Steel Legs & Undershelf

VSS-240

VSS-242

VSS-243

VSS-244

VSS-245

VSS-246

VSS-247

VSS-248

VSS-249

VSS-2410

VSS-2411

VSS-2412

VSS-300

VSS-302

VSS-303

VSS-304

VSS-305

VSS-306

VSS-307

VSS-308

VSS-309

VSS-3010

VSS-3011

VSS-3012

VSS-363

VSS-364

VSS-365

VSS-366

VSS-367

VSS-368

VSS-369

VSS-3610

VSS-3611

VSS-3612

24” Wt. 30” Wt. 36” Wt.

Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

49 lbs.

31 lbs.

64 lbs.

79 lbs.

92 lbs.

109 lbs.

130 lbs.

145 lbs.

161 lbs.

261 lbs.

293 lbs.

308 lbs.

65 lbs.

55 lbs.

72 lbs.

89 lbs.

107 lbs.

125 lbs.

148 lbs.

166 lbs.

176 lbs.

287 lbs.

324 lbs.

339 lbs.

88 lbs.

98 lbs.

118 lbs.

138 lbs.

164 lbs.

184 lbs.

190 lbs.

308 lbs.

358 lbs.

373 lbs.

VLG-Series: Galvanized Steel Legs & Undershelf

VLG-240

VLG-242

VLG-243

VLG-244

VLG-245

VLG-246

VLG-247

VLG-248

VLG-249

VLG-2410

VLG-2411

VLG-2412

VLG-300

VLG-302

VLG-303

VLG-304

VLG-305

VLG-306

VLG-307

VLG-308

VLG-309

VLG-3010

VLG-3011

VLG-3012

VLG-363

VLG-364

VLG-365

VLG-366

VLG-367

VLG-368

VLG-369

VLG-3610

VLG-3611

VLG-3612

24” Wt. 30” Wt. 36” Wt.

Wide Wide WideL

30”

24”

36”

48”

60”

72”

84”

96”

108”

120”

132”

144”

49 lbs.

31 lbs.

64 lbs.

79 lbs.

92 lbs.

109 lbs.

130 lbs.

145 lbs.

161 lbs.

261 lbs.

293 lbs.

308 lbs.

65 lbs.

55 lbs.

72 lbs.

89 lbs.

107 lbs.

125 lbs.

148 lbs.

166 lbs.

176 lbs.

287 lbs.

324 lbs.

339 lbs.

88 lbs.

98 lbs.

118 lbs.

138 lbs.

164 lbs.

184 lbs.

190 lbs.

308 lbs.

358 lbs.

373 lbs.

VSS & VLG Series UNDERSHELF Style

FLAT TOP

Units 8 ft. and larger are furnished with six (6) legs

Finished size of undershelf = Length minus 5 3/4” Width minus 5 3/4”

COUNTERTOP

EDGE DETAIL

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

F-40078 – AM Select Dishwasher Page 1 of 8

AM SELECT

DISHWASHER701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ .74 gallons per rack final rinse water

■ 58 racks per hour – hot water sanitizing

■ 65 racks per hour – chemical sanitizing

■ NSF pot and pan listed for 2-, 4- & 6- minute cycles

■ Timed wash cycles for 1, 2, 4 or 6 minutes

■ Solid state, integrated controls with digital status indicators

■ Self-draining, high efficiency stainless steel pump and stainless steel impeller

■ Stainless steel drawn tank, tank shelf, chamber, trim panels, frame and feet

■ Spring counterbalanced chamber with polyethylene guides

■ Revolving, interchangeable upper and lower anti-clogging wash arms

■ Revolving, interchangeable upper and lower rinse arms

■ Slanted, self-locating, one-piece scrap screen and basket system

■ Automatic fill

■ Door actuated start

■ Automatic drain closure

■ Vent fan control

■ External booster activation

■ Delime cycle

■ Service diagnostics

■ NAFEM Data Protocol capable

■ Straight-through or corner installation

■ Hot water or chemical sanitation

VOLTAGE

❑ 208-240/60/1

❑ 208-240/60/3

❑ 480/60/3

❑ 200-240/50/3*

❑ 380-415/50/3* *Not submitted for UL/CUL Listing

MODEL

❑ AM15

OPTIONS AT EXTRA COST

❑ Gas heat

❑ Sense-A-Temp™ 70°F rise electric booster heater

❑ Single point electrical connection for booster equipped machines (3 phase only)

ACCESSORIES

❑ 3⁄4" pressure regulator valve

❑ Peg rack

❑ Combination rack

❑ Splash shield for corner installations

❑ Flanged and seismic feet

❑ End of cycle audible alarm (field activated)

❑ Delime notification (field activated)

❑ Drain water tempering kit

Specifications, Details and Dimensions on Inside and Back.

A M

S E

LE

C

T D

IS

H

W A

S H

R

701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com

Page 2 of 8 F-40078 – AM Select Dishwasher

AM SELECT

DISHWASHER – ELECTRIC

F-40078 – AM Select Dishwasher Page 3 of 8

DISHWASHER – ELECTRIC

Page 4 of 8 F-40078 – AM Select Dishwasher

DISHWASHER – GAS

F-40078 – AM Select Dishwasher Page 5 of 8

DISHWASHER – GAS

Page 6 of 8 F-40078 – AM Select Dishwasher

AM SELECT

DISHWASHER

ELECTRIC TANK HEAT GAS TANK HEAT

AM Select Hot Water Sanitizing

Chemical Sanitizing

Machine Ratings (Mechanical) Racks per Hour (Max.) 58 65 Dishes per Hour (Average 25 per rack) 1,450 1,625

Glasses per Hour (Average 45 per rack) 2,610 2,925

Table to Table - Inside Tank at Table Connection (Inches) 251⁄4" 251⁄4"

Overall Dimensions - (H x W x D) (Inches) 66.5" x 27" x 28.5"

Wash Motor H.P. 2 2

Wash Tank Capacity - Gallons 14 14

Wash Pump Capacity - Gallons per Minute - Weir Test 160 160

Heating Equipment - (For keeping power wash water hot) Gas Burner (Regulated) Natural/LP Gas BTU/Hr. 25,000 25,000 Electric Heating Unit (Regulated) 5 kw 5 kw

Rinse - Minutes operated during hour of capacity operation 9.66 10.83

Seconds of rinse per rack 10 10

Rate of Rinse Flow - Gallons per Minute - at 20 lbs. Flow Pressure 4.4 4.4

Rinse Consumption - Gallons per Hour - Maximum - at 20 lbs. Flow Pressure 42.9 48.1

Rinse Cycle - Gallons per Rack - at 20 PSI Flow .74 - 180°F Min. .74 - 140°F Min.

Steam Booster, if used based on 20 PSI steam - 20 PSI water flowing 130°F entering water raised to 180°F min. (50°F rise) - Lbs. per Hour 40 40

Peak Rate of Drain Flow - Gallons per Minute (Initial rate with full tank) 14 14

Exhaust Requirements 450 450

Shipping Weight Crated - Approx. lbs. - Unit only, with booster 354 w/o Booster 384 w/Booster 354

F-40078 – AM Select Dishwasher Page 7 of 8

DISHWASHER

Page 8 of 8 F-40078 – AM Select Dishwasher

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

AM SELECT

DISHWASHER

The microcomputer-based control system is built into the AM Select dishwasher. It is available in standard electrical specifications of 208-240/60/1, 208-240/60/3, 480/60/3, 200-240/50/3, 380-415/50/3 and is equipped with a reduced voltage pilot circuit transformer.

*CAUTION: CERTAIN MATERIALS, INCLUDING SILVER,

ALUMINUM AND PEWTER ARE ATTACKED BY SODIUM

HYPOCHLORITE (LIQUID BLEACH) IN THE CHEMICAL

SANITIZING DISHWASHER MODE OF OPERATION. WATER

HARDNESS MUST BE CONTROLLED TO 4-6 GRAINS FOR

BEST RESULTS.

CONSTRUCTION: Drawn tank, tank shelf and feet constructed of 16 gauge stainless steel. Wash chamber and front trim panel above motor compartment are polished, satin finish. Frame is 12 gauge stainless steel, chamber is 18 gauge, and removable trim panels are 20 gauge.

CHAMBER LIFT: Chamber coupled by stainless steel handle, spring counterbalanced. Chamber guided for ease of operation and long life.

PUMP: With stainless steel pump and impeller, integral with motor assures alignment and quiet operation. Pump shaft seal with stainless steel parts and a carbon ceramic sealing interface.

Easily removable impeller housing permits ease of inspection.

Capacity 160 GPM. Pump is completely self-draining.

MOTOR: Built for Hobart, 2 H.P., with inherent thermal protection, grease-packed ball bearings, splash-proof design, ventilated. Single-phase is capacitor-start, induction-run type.

Three-phase is squirrel-cage, induction type.

MICROCOMPUTER CONTROL SYSTEM: Hobart microcomputer controls, assembled within water-resistant enclosure, provide built-in performance and reliability.

The microcomputer control, relays and contactors are housed behind a stainless steel enclosure, hinged to provide easy access for servicing. The line voltage electrical components are completely wired with 105°C, 600V thermoplastic insulated wire with stranded conductors and routed through listed electrical conduit. Electrical components are wired with type ST cord.

Line disconnect switch NOT furnished.

CYCLE OPERATION: The microcomputer-timing program is started by closing the doors, which actuates the door cycle switch. The microcomputer energizes the wash pump motor contactor during the wash portion of the program. After the wash, a dwell permits the upper wash manifold to drain. At the end of the dwell, the final rinse solenoid valve is energized. After the final rinse valve closes, Sani-Dwell (Hot Water Mode only) permits sanitization to continue. The Rinse display remains on during this period, completing the program. If the microcom-puter is interrupted during a cycle by the door-cycle switch, the microcomputer is reset to the beginning of the program.

Hot Water Sanitizing (58 racks per hour) – 57 seconds: 38 Second Wash, 2 Second Dwell, 10 Second Rinse, 7 Second Sani-Dwell. Chemical Sanitizing (65 racks per hour) – 50 Seconds: 38 Second Wash, 2 Second Dwell, 10 Second Rinse.

Other programs can be pre-selected by your Hobart service technician.

Manual wash cycle selector also provides selection of 2-, 4- or 6-minute wash cycles for heavier washing applications.

WASH: Hobart revolving stainless steel wash arms with un-restricted openings above and below provide thorough distri-bution of water jets to all dishware surfaces. Arms are easily removable for cleaning and are interchangeable. Stainless steel tubing manifold connects upper and lower spray system.

RINSE: Rotating rinse arms, both upper and lower, feature 14 rinse nozzles. The stainless steel upper and lower rinse arms are easily removable without tools for inspection and are interchangeable. Diaphragm-type rinse control solenoid valve mounted outside machine. Machine is equipped with special hot water vacuum breaker on downstream side of rinse valve – mounted 6" above uppermost rinse opening. Easy open brass line strainer furnished.

FILL: Microcomputer controlled fill valve installed on upstream side of rinse vacuum breaker. Ratio fill method is used giving the correct fill at any flowing water pressure. (20 PSIG minimum necessary for proper rinsing.)

DRAIN AND OVERFLOW: Large bell type automatic overflow and drain valve controlled from inside of machine. Drain automatically closed by lowering chamber. Drain seal is large diameter, high temperature “O” ring. Cover for overflow is integral part of the standpipe.

STRAINER SYSTEM: Equipped with large, exclusive self-flush-ing, easily removable perforated stainless steel, one-piece strainer and large capacity scrap basket. Submerged scrap basket minimizes frequent removal and cleaning.

HEATING EQUIPMENT: Standard tank heat is 5KW electric _immersion heating element. Regulated power infrared gas immersion tube system is optional at extra cost. A solid-state igniter board controls the gas valve and provides flame ignition.

A transformer steps the control circuit voltage down to 24 volts to power the igniter board and gas valves.

Gas Heated Dishwasher: For natural gas, gas pressure (customer connection) not to exceed 7" W.C. For liquefied petroleum, gas pressure to burner (customer connection) not to exceed 11" W.C. If gas pressure is higher than 7" W.C. natural or 11" W.C. LP, a pressure regulating valve must be supplied (by others) in the gas line to the dishwasher. Water temperature regulation is controlled by thermistor sensor in combination with microcomputer controls. The tank heat and positive low water protection microcomputer circuits are automatically activated when the main power switch is turned “on”. If tank is accidental-ly drained, low water protection device automatically turns heat off. Gas immersion tube is additionally protected by a high limit device mounted on the surface of the tube. These features are standard with the Hobart Microcomputer Control System.

OPTIONAL EQUIPMENT AT EXTRA COST – ELECTRIC

BOOSTER HEATER: Electric booster with Sense-A-TempTM technology adequately sized to raise 110°F inlet water to 180°F (not available on gas heat machines).

ACCESSORIES: 193⁄4" x 193⁄4" peg and combination dish racks.

Splash shield for corner installations. End of cycle audible alarm (field activated). Delime notification (field activated). Desirable functional accessories can be furnished at added cost. See listed options and accessories on this specification sheet. Write to the factory for special requirements not listed above.

F-40078 (REV. 05/11) LITHO IN U.S.A. (H-01)

Cold sTorage Made To order, Made To lasT.

Foodservice businesses who specify imperial brown get a customized approach for their walk-in cooler and freezer system. imperial brown’s precision engineering means you can count on walk-in systems with unparalleled capabilities in design, longevity and energy efficiency.

CuStoM dESign:

• Built to your exact specifications to maximize effective use of space

• Optimizes shelving space and layout

SuPErior SyStEM liFE:

• Features durable high-density structural framing for made-to-measure panels to ensure exact alignment

• High density polyurethane framing adds structural integrity and strength to the entire walk-in outStanding EnErgy EFFiCiEnCy:

• Features environmentally friendly polyurethane foamed in place construction providing the highest insulating values in the industry

rebate programs

California title 20 and 24

CraFTsManship as iF eMploYees oWn The CoMpanY, BeCause TheY do.

• Ownership on the plant floor is what makes the difference, employees control all of the company stock

• Drawing upon over 100 years of proven industry experience to create long-term customer relationships

• Featuring long-term “employee-owners” committed to unparalleled engineering, manufacturing and customer service

• Providing outstanding and responsive technical support for life of system

The logiC leads To one ConClusion:

no one Makes Walk-in Coolers and Freezers like iMperial BroWn.

• Featuring precise engineering and innovative design for exact and constant temperature control meeting

components to enhance operation and system life for the harshest foodservice environment

than 100 years of uncompromised commitment to product quality and customer support

OrderWorksheet_Walk-ins_QuoteRequest – 080111a

BOX ____ Please e-mail to Imperial Brown at sales@imperial-brown.com Page ____ Of ____

Sent By: Job name:

Address: Address:

City, State & ZIP: City, State & ZIP:

Attention: Attention:

Phone: Phone:

E-mail: Fax:

Cooler Freezer Cooler/Freezer Cooler/Cooler Freezer/Freezer L shape Cooler L shape Freezer Misc

Box description:

Indoor / Outdoor Roof sloping direction Depth: Exterior Base Interior Base SKETCH Width: Stucco Galv. Stucco Galv.

Height: Smooth White Smooth White

WFU HDU Stucco White Stucco White 3 ½ ”

Plywood Wall Plywood Wall 4 ”

Stucco Alum. (.040) Stucco Alum. (.040) 5 ”

White Alum. White Alum.

5 ½ ”

FRP FRP

Stainless Steel Stainless Steel Exposed Finishes:

FLOOR Foot Traffic Hand Truck Man Pallet Electric pallet

None 300 500 750 950 (wood) 1400 (wood) ____” PIT by others

DOORS

___Overlap doors: L R OPTIONS ___Flush doors: L R Strip Curtains

___Double acting doors: Kick plate

___Manual sliding doors: L R Engineering

___Electric sliding doors: L R Tie-downs

___Manual biparting doors: Fluorescent lights

___Electric biparting doors:

___Reach-in doors: L R

___Glass door openings:

___Man door openings:

___Door accessories:

___Ramp (Int. / Ext.): Option ramp? Pallet jack ramp?

ACCESSORIES

___Vapor proof lights ___Audio alarms ___Track ports ___lin ft vertical closures white ___2” dial thermometer ___Heated air vents ___lin ft ceiling closure galvanized ___lin ft vertical closures stainless steel ___4”dial thermometer ___lin ft 2 ½” molding ___lin ft ceiling closure white ___Wall connectors ___Switch w/ pilot light ___lin ft 6” cove base ___lin ft ceiling closure stainless ___Roof connectors ___Interior constant burning switch ___Dairy support post ___lin ft vertical closures galvanized ___Val-Rib III roofing

FREIGHT

Mounted caps Roof cap Location:

Lag-Down ceiling Tie downs Delivered and installed Camlock ceiling NSF seal Freight only Camlock floor Oregon seal FOB Imperial plant

REFRIGERATION OPTION / INCLUDE / NONE

Outdoor Operating Temp (Holding):_______ Power Requirements: volts/ phase/60 hertz Options:

Indoor Pulldown/Product Load:_______ PSC Motors EC Motors Copper Fins

High & Low Ambient Temp_______ H _______L Elevation- FT. _______ Wind Speed._____ MPH Snow Load_____#_PSF R-22______ 404-A ______ Copyright Imperial Manufacturing Ice Cold Coolers Inc. 1998-2008. All Rights Reserved.

2110 South 26th Street

PO Box 1720

Manitowoc, WI 54221-1720 USA

Tel: 1.920.682.0161

Fax: 1.920.683.7589 www.manitowocice.com

Indigo Series i-1106 Ice Machine on B-570 Bin

Dice 7⁄8" x 7⁄8" x 7⁄8" (2.22 x 2.22 x 2.22 cm)

Half Dice 3⁄8" x 11⁄8" x 7⁄8" (.95 x 2.86 x 2.22 cm)

Ice Shape

Indigo™ Series 1106 Ice Cube Machine

Indigo ™ Series 1106 Ice C ube M achine

Model: ID-1106A IY-1106A ID-1106W IY-1106W ID-1196N IY-1196N

Ice Machine Electric 208-230/60/1 standard (208-230/60/3 and 230/50/1 also available.)

Minimum circuit ampacity:

Air-cooled: 13 1ph 9.8 3ph Water-cooled: 11.9 1ph 8.7 3ph Remote: 12.9 1ph 9.7 3ph

Maximum fuse size:

Air-cooled: 20 1ph 15 3ph Water-cooled: 20 1ph 15 3ph Remote: 20 1ph 15 3ph

YEAR YEAR

COMPRESSORICE MAKER EVAPORATOR

PARTS AND LABOR

YEAR PARTS

3 YEAR LABOR

Designed for operators who know that ice is critical to their business, the Indigo™ Series ice machine's preventative diagnostics continually monitor itself for reliable ice production. Improvements in cleanability and programmability make your ice machine easy to own and less expensive to operate.

• New Levels of Performance – showcasing reductions in energy consumption and improved ambient ice production: up to 9% reduction in energy and up to 20% improvement in ice production.

• EasyRead Display – communicates operating status, cleaning reminders, and asset information through a blue illuminated display.

• Programmable Ice Production – by On/Off Time, Ice Volume or Bin Level (with accessory bin level control) further improves energy efficiency and savings.

• Easy to Clean Foodzone – Hinged front door swings out for easy access. Removable water-trough, distribution tube, curtain, and sensing probes for fast and efficient cleaning.

Select components made with AlphaSan® antimicrobial.

• Intelligent Diagnostics – provide 24 hour preventative maintenance and diagnostic feedback for trouble free operation.

• Acoustical Ice Sensing Probe – for reliable operation in challenging water conditions.

• DuraTech™ Exterior – provides superior corrosion resistance. Stainless finish with innovative clear-coat resists fingerprints and dirt.

• Available LuminIce™ Growth Inhibitor controls the growth of bacteria and yeast within the foodzone.

Specifi cations BTU Per Hour:

16,250 (average) 18,600 (peak)

Refrigerant:

R-404A CFC-free

Operating Limits:

• Ambient Temperature Range:

35˚ to 110˚F (1.7˚ to 43.3˚C) Water Temperature Range:

35˚ to 90˚F (1.7˚ to 32.2˚C)

• Water Pressure Ice Maker Water In:

Min. 20 psi (137.9 kPA) Max. 80 psi (551.1 kPA)

2110 South 26th Street

PO Box 1720

Manitowoc, WI 54221-1720 USA

Tel: 1.920.682.0161

Fax: 1.920.683.7589 www.manitowocice.com i-1106 on B-570 Storage Bin

D

M an ito w oc

/1

C on tin ui ng p ro du ct im pr ov em en t m ay n ec es si ta te c ha ng e of s pe ci fic at io ns w ith ou t n ot ic e.

Installation Note Minimum installation clearance:

Top/sides: 8" (20.32 cm);

Back is 5" (12.7 cm)

Model Ice

Shape

Ice Production 24 Hours

Power Usage kWh/100 lbs.

@90°Air/70°F

Water Usage / 100 lbs.

45.4 kgs. of Ice

ENERGY

STAR®70°Air/ 50°F Water 90°Air/ 70°F Water 1 Ph 3 Ph Potable Water

AI

R-

CO

OL

ED ID-1106A

dice 1,141 lbs. 846 lbs.

5.06 5.06

19.8 Gal.

H518 kgs. 384 kgs. 75.0 L

IY-1106A

half-dice 1,200 lbs. 870 lbs.

5.01 5.01

19.8 Gal.

H544 kgs. 395 kgs. 75.0 L

W

AT

ER

-C

OO

LE

D ID-1106W

dice 1,057 lbs. 906 lbs.

4.08 4.08

19.8 Gal.

NA

479 kgs. 411 kgs. 75.0 L

IY-1106W

half-dice 1,134 lbs. 965 lbs.

3.90 3.90

19.8 Gal.

NA

514 kgs. 438 kgs. 75.0 L

* Water-cooled Condenser Water Usage / 100 lbs. /45.4 kgs. Of Ice: 180 gal/681 L.

* Water-cooled models are excluded from ENERGY STAR qualification.

RE

M

OT

E-

CO

OL

ED

ID-1196N

dice 1,027 lbs. 867 lbs.

4.98 4.98

19.8 Gal.

H466 kgs. 393 kgs. 75.0 L

IY-1196N

half-dice 1,066 lbs. 922 lbs.

4.88 4.88

19.8 Gal.

H 484 kgs. 418 kgs. 75.0 L Order ice storage bin separately. Ice storage bin and JC-0995 remote condenser must be ordered separately. Consult remote condenser specification sheet for details.

To order 3 phase add “3” suffix to model # (ID-1002A3).

Specifications

AuCS® schedules and performs routine ice machine cleaning automatically.

Accessories LuminIce™ Growth Inhibitor reduces yeast and bacteria growth for a cleaner ice machine.

Bin Level Control Allows ice bin level to be automatically set. Built-in LED light illuminates bin.

Arctic Pure® Water Filters Reduces sediment and chlorine odors for better tasting ice.

34.00" (86.36 cm) 30.00" (76.20 cm)

19.00" (48.26 cm)

11.00" (27.94 cm)

44.00" (111.76 cm)

29.50" (74.93 cm)

22.00" (55.88 cm)

13.00" (33.02 cm)

6.75" (17.15 cm)

5.25" (13.34 cm)

4.00"…