R11.pdf
PDF 615 KB Posted
- Attached to
- Install Government Metal Building and Slab Work
- Solicitation number
- 1232SC18R0017
About this file
Drawing - Instructions
View the file
Other files
| File | Type | Posted |
|---|---|---|
| R12.pdf | ||
| ss_E3.pdf | ||
| R8.pdf | ||
| ss_E4.pdf | ||
| R10.pdf | ||
| ss_E6.pdf | ||
| 1232SC18R0017_Amendment_0001.pdf | ||
| R1.pdf | ||
| ss_E9.pdf | ||
| R5.pdf | ||
| R4.pdf | ||
| R2.pdf | ||
| ss_E1.pdf | ||
| R13.pdf | ||
| ss_E10.pdf | ||
| ss_E7.pdf | ||
| R3.pdf | ||
| ss_E8.pdf | ||
| ss_E5.pdf | ||
| ss_E2.pdf | ||
| R7.pdf | ||
| R9.pdf | ||
| ss_F1.pdf | ||
| R6.pdf | ||
| Stamped_DuroBeam_217-38_Calcs_2018-03-16.pdf | ||
| Solicitation_1232SC18R0017.pdf | ||
| Stamped_DuroBeam_217-38_60x80_fndt_2018-3-16.pdf | ||
| Atch_1_-_DOL_Wage_Determination,_OH82,_Mod_8,_dated_6-15-2018.pdf | ||
| Atch_2_-_Statement_of_Work_Prefab_Metal_Bldg.pdf |
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PBR Wall Panel - Three Sided Framed Opening Trim Installation with Field Notch Panel at Head Trim
PW07022
03Sep '14
PBR Wall Panel - Three Sided Framed Opening Field Notch Panel at Head Trim
PW07023
03Sep '14 03
PW07024PBR Wall Panel - Three Sided Framed Opening Trim Installation with Field Notch and Bend Tabs at Head Trim Sep '14 03
PBR Wall Panel - Three Sided Framed Opening Field Notch and Bend Tabs at Head Trim
PW07025
Sep '14
PBR Wall Panel - Three Sided Framed Opening Jamb Trim Field Cut Details
PW07027
01Sep '14
PBR Wall Panel - Three Sided Framed Opening "Optional" Channel Closure Trim
PW07028
03Mar '15
PBR Wall Panel - Three Sided Framed Opening Jamb Trim Installation
PW07029
02May '14
PBR Wall Panel - Three Sided Framed Opening Head Trim Installation
PW07030
01Mar '14
Th is pa rts or de r t o b e u se d f or fie ld mo dif ica tio n o f o rg ina l jo b 1
5- B-
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text Opening Width + 6" (+2" Lap when req'd)
AutoCAD SHX Text 3 "34"
AutoCAD SHX Text Opening Height + 5" (+2" Lap when req'd)
AutoCAD SHX Text 3"
AutoCAD SHX Text 3"
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Opening Height
AutoCAD SHX Text 1 "14"
AutoCAD SHX Text Fastener #14A " x " Pop Rivet at 18" x " Pop Rivet at 38" Pop Rivet at 1'-8 O.C. at Cold Form OR Fastener #16 12-24 x 1 " SD Pancake DP5 W/O Washer 12" SD Pancake DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls.
AutoCAD SHX Text See PW07023 & PW07027
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Note: Field measure Opening Width Field measure Opening Width and Height before making field cuts and adjust cut dimensions accordingly.
AutoCAD SHX Text Note: Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 : Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 OR with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025. with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025.
AutoCAD SHX Text Finish Floor Line
AutoCAD SHX Text Head Trim F481 F481
AutoCAD SHX Text Jamb Trim F482 F482 or Alternate F484 F484
AutoCAD SHX Text Jamb Trim F482 F482 or Alternate F484 F484
AutoCAD SHX Text 14" Bead of HW54_ Tube Caulking from Header to Floor (see section)
AutoCAD SHX Text See PW07030
AutoCAD SHX Text See PW07029
AutoCAD SHX Text 2" Lap with (2) Fasteners #14 18" x " Pop Rivet 316" Pop Rivet Typ at Head & Jamb Trim when required. Field notch as required.
AutoCAD SHX Text Note: For "Optional" Channel Closure Trim see PW07028
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text Note: Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 : Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 OR with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025. with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025.
AutoCAD SHX Text 3"
AutoCAD SHX Text Opening Width
AutoCAD SHX Text See PW07027 for Jamb Trim field cut detail
AutoCAD SHX Text Fastener #14A " x " Pop 18" x " Pop 38" Pop Rivet at 20" O.C. at Cold Form OR Fastener #16 12-24 x 1 " SD Pancake DP5 12" SD Pancake DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text Head Trim F481F481
AutoCAD SHX Text Jamb Trim F482 F482 or Alternate F484 F484
AutoCAD SHX Text Opening Width
AutoCAD SHX Text 14"
AutoCAD SHX Text Opening Height
AutoCAD SHX Text 3"
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls
AutoCAD SHX Text Note: Panel position is shown with Panel position is shown with Panel Rib and Opening on 1'-0 module. Location of Rib may vary depending on the Opening Width and location. Field measure before cutting Panel and Trim.
AutoCAD SHX Text Field notch Panel at Head Trim
AutoCAD SHX Text Field cut Panel
AutoCAD SHX Text Opening Width + 6" (+2" Lap when req'd)
AutoCAD SHX Text Front View
AutoCAD SHX Text Head Trim F481F481
AutoCAD SHX Text 2" Lap with (2) Fasteners #14 18" x " Pop Rivet and HW54_ 316" Pop Rivet and HW54_ Caulking
AutoCAD SHX Text End View
AutoCAD SHX Text Caulk with HW54_ at these edges after installation
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text 3 "34"
AutoCAD SHX Text Opening Height
AutoCAD SHX Text Fastener #14A " x " Pop Rivet 18" x " Pop Rivet 38" Pop Rivet at 1'-8 O.C. at Cold Form OR Fastener #16 12-24 x 1 " Pancake SD DP5 12" Pancake SD DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls.
AutoCAD SHX Text Note: Field measure Opening Width Field measure Opening Width and Height before making field cuts and adjust cut dimensions accordingly.
AutoCAD SHX Text Jamb Trim F482 F482 or Alternate F484 F484
AutoCAD SHX Text Jamb Trim F482 F482 or Alternate F484 F484
AutoCAD SHX Text Head Trim F481 F481
AutoCAD SHX Text 14" Bead of HW54_ Tube Caulking from Header to Floor (see section)
AutoCAD SHX Text Opening Width + 3"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Field Cut and Remove
AutoCAD SHX Text Opening Width + 6" (+2" Lap when req'd)
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 1 "14"
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Finish Floor Line
AutoCAD SHX Text Note: Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 : Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 OR with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025. with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025.
AutoCAD SHX Text See PW07025 & PW07027
AutoCAD SHX Text Opening Height + 5" (+2" Lap when req'd)
AutoCAD SHX Text See PW07030
AutoCAD SHX Text See PW07029
AutoCAD SHX Text 2" Lap with (2) Fasteners #14 18" x " Pop Rivet 316" Pop Rivet Typ at Head & Jamb Trim when required. Field notch as required.
AutoCAD SHX Text Field Notch and Bend 1 " Tab behind Jamb 12" Tab behind Jamb Trim. Attach with Fastener #14 " x " 18" x " 316" Pop Rivet. See See PW07025 for details.
AutoCAD SHX Text Note: For "Optional" Channel Closure Trim see PW07028
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text 58"
AutoCAD SHX Text 58"
AutoCAD SHX Text 1 "14"
AutoCAD SHX Text Opening Width
AutoCAD SHX Text 14"
AutoCAD SHX Text Opening Height
AutoCAD SHX Text See PW07027 for Jamb Trim field cut detail
AutoCAD SHX Text Field Cut and Remove
AutoCAD SHX Text Bend 1 " Tab 12" Tab down 90 degrees
AutoCAD SHX Text End Cut Detail
AutoCAD SHX Text (Viewed from top of Head Trim)
AutoCAD SHX Text Do not cut or remove back leg
AutoCAD SHX Text Opening Width
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Fastener #14A " x " Pop Rivet at 18" x " Pop Rivet at 38" Pop Rivet at 1'-8 O.C. at Cold Form OR Fastener #16 12-24 x 1 " Pancake SD DP5 W/O Washer 12" Pancake SD DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text Head Trim F481F481
AutoCAD SHX Text Jamb Trim F482 or Alternate F484F482 or Alternate F484 or Alternate F484 F484
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Note: Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 : Trim Installation can be done by Field Notch Panel as shown on PW07022 & PW07023 OR with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025. with Field Notch and Bend Tabs at Head Trim as shown on PW07024 & PW07025.
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls
AutoCAD SHX Text Note: Panel position is shown with Panel position is shown with Panel Rib and Opening on 1'-0 module. Location of Rib may vary depending on the Opening Width and location. Field measure before cutting Panel and Trim.
AutoCAD SHX Text Field Notch and Bend 1 " Tab 12" Tab behind Jamb Trim. Attach with Fastener #14 " x " Pop Rivet18" x " Pop Rivet316" Pop Rivet
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Field cut Panel
AutoCAD SHX Text *Opening Width
AutoCAD SHX Text *Opening Width + 3"
AutoCAD SHX Text Opening Width + 6" (+2" Lap when req'd)
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Front View
AutoCAD SHX Text See End Cut Detail
AutoCAD SHX Text *Field Cut Remainder and Remove
AutoCAD SHX Text *Note: Field measure Field measure Opening Width and cut Head Trim to required length.
AutoCAD SHX Text Head Trim F481F481
AutoCAD SHX Text End View
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 2" Lap with (2) Fasteners #14 18" x " Pop Rivet and HW54_ 316" Pop Rivet and HW54_ Caulking
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text Side View at Head Trim
AutoCAD SHX Text 18"
AutoCAD SHX Text Jamb Trim F482 and F482 and and Alternate Jamb Trim F484 F484 Front View Right Jamb Trim as shown Left Jamb Trim opposite hand
AutoCAD SHX Text 4 "18"
AutoCAD SHX Text 3 "18"
AutoCAD SHX Text 12"
AutoCAD SHX Text 18"
AutoCAD SHX Text 3 "34"
AutoCAD SHX Text Field Cut and Remove
AutoCAD SHX Text Opening Height + 5" (+2" Lap when required)
AutoCAD SHX Text Side View at Sill Trim
AutoCAD SHX Text Opening Height
AutoCAD SHX Text Note: Field measure Opening Height Field measure Opening Height before making field cuts and adjust cut dimensions accordingly.
AutoCAD SHX Text 12"
AutoCAD SHX Text 3 "34"
AutoCAD SHX Text 3 "34"
AutoCAD SHX Text Cut and remove remainder of front fold
AutoCAD SHX Text Jamb Trim F482 F482 Top View
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Alternate Jamb Trim F484 F484 Top View
AutoCAD SHX Text 1 "14"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Finish Floor Line
AutoCAD SHX Text 2" Lap when required. Field cut and notch as required.
AutoCAD SHX Text
(2) Fasteners #14 18" x " Pop Rivet 316" Pop Rivet at lap
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 4 "18"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 4 "18"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text 1 "12"
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text Opening Width + 7" (+2" Lap when req'd)
AutoCAD SHX Text 3 "12"
AutoCAD SHX Text Opening Height + 3 " (+2" Lap when req'd)12" (+2" Lap when req'd)
AutoCAD SHX Text 3 "12"
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Opening Height
AutoCAD SHX Text Fastener #14A " x " Pop Rivet 18" x " Pop Rivet 38" Pop Rivet at 1'-8" O.C. at Cold Form OR Fastener #16 12-24 x 1 " Pancake SD DP5 12" Pancake SD DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text 2" Lap typ at Head & Jamb when required. Field cut to length if req'd and notch.
AutoCAD SHX Text Channel Closure Trim
AutoCAD SHX Text Channel Closure Trim
AutoCAD SHX Text Channel Closure Trim
AutoCAD SHX Text 3 "12"
AutoCAD SHX Text Finish Floor Line
AutoCAD SHX Text 2 " Field cut and remove12" Field cut and remove
AutoCAD SHX Text 1" Field bend tab down 90 degrees
AutoCAD SHX Text Channel Closure Trim at Jambs
AutoCAD SHX Text 3 " Field cut and remove12" Field cut and remove
AutoCAD SHX Text 3 "12"
AutoCAD SHX Text Channel Closure Trim
AutoCAD SHX Text End Cut Detail
AutoCAD SHX Text See PW07030
AutoCAD SHX Text See PW07029
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls.
AutoCAD SHX Text Note: Field measure Opening Width Field measure Opening Width and Height before making field cuts and adjust cut dimensions accordingly.
AutoCAD SHX Text Note: The interior leg of the Channel Closure The interior leg of the Channel Closure Trim is to be oriented (±1/8") to match the interior leg of the Header or Jamb.
AutoCAD SHX Text F981 - 8" Member - 8" Member F2994 - 8 " Member - 8 " Member 14" Member F982 - 10" Member - 10" Member
AutoCAD SHX Text Optional Channel Closure Trim Piece Mark
AutoCAD SHX Text F2993 - 10 " Member - 10 " Member 14" Member F169 - 12" Member - 12" Member F2995 - 12 " Member - 12 " Member14" Member
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls.
AutoCAD SHX Text Alternate Jamb Trim F484 Profile F484 ProfileProfile
AutoCAD SHX Text Field Cut Wall Panel
AutoCAD SHX Text Jamb Trim F482 (shown) F482 (shown) (shown) or Alternate Jamb Trim F484 F484
AutoCAD SHX Text PBR Wall Panel
AutoCAD SHX Text Note:Terminate Blanket Insulation :Terminate Blanket Insulation at capillary lip of Jamb Trim
AutoCAD SHX Text Opening Width
AutoCAD SHX Text Jamb (Cold Form shown Hot Rolled similar)
AutoCAD SHX Text Fastener #14A " x " Pop Rivet 18" x " Pop Rivet 38" Pop Rivet at 20" O.C. at Cold Form OR Fastener #16 12-24 x 1 " Pancake SD DP5 12" Pancake SD DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text 14" Bead of HW54_ Tube Caulking (Header to Floor)
AutoCAD SHX Text "Optional" Channel Closure Trim See PW07028 for details.
AutoCAD SHX Text Blanket Insulation
AutoCAD SHX Text Double Sided Tape (Not by Bld'g Mfg)
AutoCAD SHX Text Field flatten Trim leg when required
AutoCAD SHX Text 34"
AutoCAD SHX Text Note: Panel position is shown with Panel position is shown with Panel Rib and Opening on 1'-0 module. Location of Rib may vary depending on the Opening Width and location. Field measure before cutting Panel and Trim.
AutoCAD SHX Text Date
AutoCAD SHX Text Page
AutoCAD SHX Text Rev.
AutoCAD SHX Text Note: All trim is to be All trim is to be installed BEFORE blanket insulation is applied to walls
AutoCAD SHX Text Finish Floor Line
AutoCAD SHX Text Header (Cold Form shown Hot Rolled similar)
AutoCAD SHX Text PBR Wall Panel
AutoCAD SHX Text Fastener #14A " x " Pop 18" x " Pop 38" Pop Rivet at 20" O.C. at Cold Form OR Fastener #16 12-24 x 1 " 12" Pancake SD DP5 W/O Washer at 1'-8 O.C. at Hot Rolled
AutoCAD SHX Text 14"
AutoCAD SHX Text Opening Height
AutoCAD SHX Text Opening Height + " 14"
AutoCAD SHX Text Head Trim F481F481
AutoCAD SHX Text "Optional" Channel Closure Trim See PW0728 for details
AutoCAD SHX Text Fastener #17A 12-14 x 1 " SD W/Washer 14" SD W/Washer at 5"-7"-5" O.C. at Cold Form OR Fastener #67 12-24 x 1 " SD DP5 W/Washer 14" SD DP5 W/Washer at 5"-7"-5" O.C. at Hot Rolled
AutoCAD SHX Text Project Name & Location:
AutoCAD SHX Text Customer:
AutoCAD SHX Text Job Number:
AutoCAD SHX Text Sheet Number:
AutoCAD SHX Text Checked by:
AutoCAD SHX Text For Approval (Not For Construction)
AutoCAD SHX Text For Erector Installation
AutoCAD SHX Text For Construction Permit
AutoCAD SHX Text Drawn by:
AutoCAD SHX Text Date
AutoCAD SHX Text Revision
AutoCAD SHX Text Description
AutoCAD SHX Text By
AutoCAD SHX Text Ck'd
AutoCAD SHX Text Scale:
AutoCAD SHX Text Drawing Status:
AutoCAD SHX Text Project Engineer:
AutoCAD SHX Text Preliminary (Not For Construction)
AutoCAD SHX Text
NOT TO SCALE
AutoCAD SHX Text R11 of 13
AutoCAD SHX Text
RRB 2/5/18
AutoCAD SHX Text
PHONE: 1.800.445.0412
AutoCAD SHX Text Pompano Beach, Florida 33060
AutoCAD SHX Text www.durobuildings.com
AutoCAD SHX Text 351 South Cypress Road Suite 100
AutoCAD SHX Text Duro Beam
AutoCAD SHX Text
THE BEST PRE-ENGINEERED I-BEAM BUILDINGS
AutoCAD SHX Text The engineer whose seal appears hereon is an employee for the manufacturer, NCI Groups, Inc. or one of its affiliates, for the materials described herein. Said seal or certification is limited to the products designed and manufactured by manufacturer only. The undersigned engineer is not the overall engineer of record for this project.
AutoCAD SHX Text
METAL STORAGE BUILDING ATTN:ANDY DOKLOVIC WOOSTER, OH.
AutoCAD SHX Text
METAL STORAGE BUILDING WOOSTER, OH
AutoCAD SHX Text 15-B-12547
AutoCAD SHX Text
DRST1B
AutoCAD SHX Text
ENST1A
File details come from the government source that posted it.