Tire, Pneumatic

Please review the Market Research Questionnaire and Spreadsheet (both are included with this posting) for the National Stock Numbers (NSNs) required, and provide any sources that may be able to supply these items. The currently approved source(s) and part number(s) for each NSN are listed on the Market Research Spreadsheet. The Product Item Description for each item follows below. All information may be submitted directly to the buyer at robert.varcho@dla.mil

CL19310001

Product Item Description (PID)/Packaging/Marking

-

*** LTC PID Packaging Consolidated Text ***

-

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

CLIN 0001: NSN: 2610-01-537-4093

     TIRE, PNEUMATIC, VEHICLE

     REFERENCE NUMBER:RP001

     REFERENCE NUMBER:RA001

     REFERENCE NUMBER:RQ011

     REFERENCE NUMBER:CS120

     REFERENCE NUMBER:CS001

 

     TYPE I, 72 MONTHS SHELF LIFE

     ** EXCEPTION:  This shelf life item is Non-Extendable, Code I, with a

     total shelf life of seventy two months. Material furnished under this

     contract/order shall have at least 48 months of shelf life remaining at

     time of delivery.

     REFERENCE NUMBER:CS187

     TIRE CHARACTERISTICS

     SOURCE CONTROL DRAWING

     TIRE SIZE DESIGNATION: 365/80R20MPT

     TIRE STRENGTH: LOAD RANGE L

     TIRE LOAD MAX. CAPACITY: 7830 LBS

     MAX. INFLATION PRESSURE: 90 PSI

     MATERIAL: RUBBER, NATURAL

     TIRE CONSTRUCTION: RADIAL

     TIRE AIR RETENTION METHOD: TUBELESS TYPE

     FLAP: NO

     SERVICE TYPE: MILITARY TRUCK / BUS

     TREAD DESIGN: ALL SEASON MUD / SNOW LUG

     VEHICLE APPLICATION: JOINT LIGHT TACTICAL VEHICLE (JLTV) ; RG 31 LIGHT

     ARMORED VEHICLE COUNTERMINE EQUIPMENT NSN 2355-20-001-9926

     Michelin North America, Inc. DBA 12195 P/N 97627

     IAW BASIC DRAWING NR 19207 12601053

     REVISION NR C   DTD 06/05/2019

     PART PIECE NUMBER:

     IAW REFERENCE STD NR MIL-STD-129R(2)

     REVISION NR R   DTD 09/27/2019

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12612043

     REVISION NR     DTD 01/23/2019

     PART PIECE NUMBER:

     IAW REFERENCE DRAWING NR 19207 12601053

     REVISION NR     DTD 08/08/2019

     PART PIECE NUMBER:

     PREP FOR DELIVERY

     LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

     QUP:001  PRES MTHD:ZZ  CLNG/DRY:Z  PRESV MAT:ZZ

     WRAP MAT:ZZ  CUSH/DUNN MAT:ZZ  CUSH/DUNN THKNESS:Z

     UNIT CONT:ZZ  OPI:M

     INTRMDTE CONT:ZZ  INTRMDTE CONT QTY:ZZZ

     PACK CODE = Q: PACKING LEVEL = B:

     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

     SPECIAL MARKING CODE:32 -32 Type I, shelf life

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

     MOP CODE ZZ = PACKAGING SHALL BE IAW MIL-DTL-4

     REFERENCE NUMBER:ZDL58

CLIN 0002: NSN: 2610-01-678-8323

     TIRE, PNEUMATIC, VEHI

     REFERENCE NUMBER:RP001

     REFERENCE NUMBER:RA001

     REFERENCE NUMBER:RQ011

     REFERENCE NUMBER:ZL001

     REFERENCE NUMBER:ZD080

     REFERENCE NUMBER:A0003

     REFERENCE NUMBER:Q0106

     REFERENCE NUMBER:CA060

     Michelin North America, Inc. DBA 12195 P/N 303274

     PREP FOR DELIVERY

     LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

     PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

     QUP:001  PRES MTHD:10  CLNG/DRY:1  PRESV MAT:00

     WRAP MAT:CA  CUSH/DUNN MAT:00  CUSH/DUNN THKNESS:0

     UNIT CONT:D3  OPI:M

     INTRMDTE CONT:E5  INTRMDTE CONT QTY:AAA

     PACK CODE = Q: PACKING LEVEL = B:

     MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

     SPECIAL MARKING CODE:32 -32 Type I, shelf life

     PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

     REFERENCE NUMBER:CQSLS

*************************************************************************************

 

GLOSSARY

 

*************************************************************************************

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

     REFERENCE NUMBER RP001

     RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

     REFERENCE NUMBER RA001

     RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

     (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

     DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

     AT:

     http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

     FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

     SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS.  FOR LARGE

     ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

     APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

     REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

     REFERENCE NUMBER RQ011

     RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

     REFERENCE NUMBER CS120

     NOTE:  THE CITED DRAWING IS A SOURCE CONTROLLED

     DRAWING AND AS OF THE DATE OF THIS SOLICITATION

     ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

     BEEN APPROVED.  EVEN THOUGH SOURCES AND APPROVED

     PART NUMBERS ARE PROVIDED, THE ITEMS

     FURNISHED MUST MEET THE REQUIREMENTS OF THE

     CITED DRAWING.  OFFERORS WHO ARE INTERESTED IN

     QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

     ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

     ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

     DRAWING.

     ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

     THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

     THIS TIME.

     REFERENCE NUMBER CS001

     EXPORT CONTROL OF TECHNICAL DATA:

     This item has technical data some or all of which is subject to

     export-control of either the International Traffic in Arms regulations

     (ITAR) or the Export Administration Regulations (EAR), and cannot be

     exported without prior authorization from either the Department of State

     or the Department of Commerce.  Export includes disclosure of technical

     data to foreign persons and nationals whether located in the United

     States or abroad.  This requirement applies equally to foreign national

     employees and U.S. companies and their foreign subsidiaries. DFARS

     252.225-7048 is applicable to this data.

     The Defense Logistics Agency (DLA) limits distribution of export-control

     technical data to DLA contractors that have an approved US/Canada Joint

     Certification Program (JCP) certification, have completed the

     Introduction to Proper Handling of DOD Export-Controlled Technical Data

     Training and the DLA Export-Controlled Technical Data Questionnaire

     (both are available at the web address given below), and have been

     approved by the DLA controlling authority to access the

     export-controlled data.  Instructions for obtaining access to the

     export-controlled data can be found at:

     https://www.dla.mil/HQ/LogisticsOperations/EnhancedValidation/

     To be eligible for award, offerors and any sources of supply proposed

     for use are required to have an approved JCP certification and have

     beenapproved by the DLA controlling authority to access

     export-controlled data managed by DLA.  DLA will not delay award in

     order for an offeror or its supplier to apply for and receive approval

     by the DLA controlling authority to access the export-controlled data.

     REFERENCE NUMBER CS187

     CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

     USED NOR INCORPORATED IN ANY ITEMS TO BE

     DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

     SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

     DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

     SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

     APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

     SPECIFICATION REQUIREMENTS.

     REFERENCE NUMBER ZDL58

     PRESERVATION & PACKAGING SHALL BE IAW THE LATEST

     REVISION OF MIL-DTL-4 PACKAGING OF NON-AIRCRAFT

     TIRES AND INNER-TUBES.

     SPECIAL MARKING REQUIREMENT:

     APPLY SHELF LIFE MARKINGS IAW MIL-STD-129.

     REFERENCE NUMBER ZL001

     ** EXCEPTION:  This shelf life item is

     Non-Extendable, Code S, with a total shelf

     life of sixty months. Material furnished

     under this contract/order shall have at least

     42 months of shelf life remaining at time of

     delivery.  **

     REFERENCE NUMBER ZD080

     SAMPLING:

     THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

     H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

     SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

     STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

     AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

     VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

     ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

     SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

     MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

     PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

     SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

     UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

     REFERENCE NUMBER A0003

     MIL-STD-130N(1) DATED 16 NOV 2012.

     IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

     REFERENCE NUMBER Q0106

     Replaced by ZD080

     REFERENCE NUMBER CA060

     NO DATA IS AVAILABLE.  THE ALTERNATE OFFEROR IS

     REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

     INCLUDING DATA FOR THE APPROVED AND ALTERNATE

     PART FOR EVALUATION.

     REFERENCE NUMBER CQSLS

     THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE S,

     WITH A TOTAL SHELF LIFE OF SIXTY MONTHS.

     MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER

     SHALL HAVE AT LEAST 85% (51 MONTHS) OF SHELF

     LIFE REMAINING AT TIME OF DELIVERY.