RF Modules

Added: Oct 07, 2015 7:03 pm The purpose of this amendment is update 1611AS12394‐2 Modulator, Signal Generator MD‐1367/ULQ‐21(V) (RF #2 Module) Specification (please see Revision D) and to extend the proposal due date to October 22, 2015.

The purpose of this amendment is to add Amendment C as referenced in the previous amendment..

Added: Sep 16, 2015 5:27 pm The purpose of this amendment is to add Amendment C as referenced in the previous amendment.

The purpose of this amendment is to answer questions and correct the block diagram (Figure 3.1.1), RF Attenuator, labeled ATTN2. The RF Attenuator ATTN2 is labeled incorrectly, it should be labeled as AATN2. This amendment will also be extending the proposal due date to October 2, 2015. The Government will not be accepting any additional questions pertaining to this RFP..

Added: Sep 15, 2015 7:39 pm The purpose of this amendment is to answer questions and correct the block diagram (Figure 3.1.1), RF Attenuator, labeled ATTN2. The RF Attenuator ATTN2 is labeled incorrectly, it should be labeled as AATN2. This amendment will also be extending the proposal due date to October 2, 2015. The Government will not be accepting any additional questions pertaining to this RFP.

The purpose of this amendment is to update the proposal due date and update the CS information in Section L..

Added: Aug 26, 2015 11:59 am The purpose of this amendment is to update the proposal due date and update the CS information in Section L.

The purpose of this amendment is to answer questions, adjust Sections L & M, incorporate clause 52.219-14 (Limitations on Subcontracting), update delivery information in Section F, extend the proposal due date, and update the point of contact information..

Added: Aug 21, 2015 5:24 pm The purpose of this amendment is to answer questions, adjust Sections L&M, incorporate clause 52.219-14 (Limitations on Subcontracting), update delivery information in Section F, extend the proposal due date, and update the point of contact information.

The purpose of this amendment is to add the attachment from Section J, and notify offerors that the question cutoff date is 8/13/2015 16:00 PM Pacific Time..

Added: Aug 07, 2015 6:08 pm The purpose of this amendment is to add the attachment from Section J, and notify offerors that the question cutoff date is 8/13/2015 16:00 PM Pacific Time.

The purpose of this amendment is to update the response date and time..

Added: Aug 04, 2015 10:31 am The purpose of this amendment is to update the response date and time.

The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, CA intends to competitively procure an Indefinite Delivery, Indefinite Quantity (IDIQ), Firm Fixed Price (FFP) award for production of the Modulator, Signal Generators (RF Modules), and Evaluation, Repair, and Modification support services for the production RF Modules. The RF Modules are integrated with other countermeasures or emitter modules to complete required system configurations. These RF Modules are installed in systems that are used to evaluate U.S. weapons systems and train Fleet operators. All responsible sources may submit a proposal, which shall be considered by the agency.

.

Added: Aug 03, 2015 11:21 am

The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, CA intends to competitively procure an Indefinite Delivery, Indefinite Quantity (IDIQ), Firm Fixed Price (FFP) award for production of the Modulator, Signal Generators (RF Modules), and Evaluation, Repair, and Modification support services for the production RF Modules. The RF Modules are integrated with other countermeasures or emitter modules to complete required system configurations. These RF Modules are installed in systems that are used to evaluate U.S. weapons systems and train Fleet operators. All responsible sources may submit a proposal, which shall be considered by the agency.

The purpose of this modification is to update the anticipated request for proposal (RFP) date, which will be issued on or about 10 JULY 2015 and will be available through Fedbizopps (https://www.fbo.gov). The RFP will close 30 days after the date of issuance. Award is anticipated to occur in October 2015.

.

Added: Jul 07, 2015 6:57 pm

The purpose of this modification is to update the anticipated request for proposal (RFP) date, which will be issued on or about 10 JULY 2015 and will be available through Fedbizopps (https://www.fbo.gov). The RFP will close 30 days after the date of issuance. Award is anticipated to occur in October 2015.

The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, CA intends to competitively procure an Indefinite Delivery, Indefinite Quantity (IDIQ), Firm Fixed Price (FFP) award for production of the Modulator, Signal Generators (RF Modules), and Evaluation, Repair, and Modification support services for the production RF Modules. The RF Modules are integrated with other countermeasures or emitter modules to complete required system configurations. These RF Modules are installed in systems that are used to evaluate U.S. weapons systems and train Fleet operators.

The request for proposal (RFP) will be issued on or about 16 MAR 2015 and will be available through Fedbizopps (https://www.fbo.gov). The RFP will close 30 days after the date of issuance. Award is anticipated to occur in August 2015. All responsible sources may submit a proposal, which shall be considered by the agency.

All responses/requests shall include the RFP number N68936-15-R-0048 and shall be submitted either in writing to the Naval Air Warfare Center Weapons Division, Code 254340D, Attn: Dan Sciambi, 429 E. Bowen Road Mail Stop 4015, China Lake, CA 93555-6108 or by the preferred method of electronic mail to daniel.sciambi@navy.mil.

.

Added: Mar 05, 2015 2:40 pm The Naval Air Warfare Center Weapons Division (NAWCWD), China Lake, CA intends to competitively procure an Indefinite Delivery, Indefinite Quantity (IDIQ), Firm Fixed Price (FFP) award for production of the Modulator, Signal Generators (RF Modules), and Evaluation, Repair, and Modification support services for the production RF Modules. The RF Modules are integrated with other countermeasures or emitter modules to complete required system configurations. These RF Modules are installed in systems that are used to evaluate U.S. weapons systems and train Fleet operators.

The request for proposal (RFP) will be issued on or about 16 MAR 2015 and will be available through Fedbizopps (https://www.fbo.gov). The RFP will close 30 days after the date of issuance. Award is anticipated to occur in August 2015. All responsible sources may submit a proposal, which shall be considered by the agency.

All responses/requests shall include the RFP number N68936-15-R-0048 and shall be submitted either in writing to the Naval Air Warfare Center Weapons Division, Code 254340D, Attn: Dan Sciambi, 429 E. Bowen Road Mail Stop 4015, China Lake, CA 93555-6108 or by the preferred method of electronic mail to daniel.sciambi@navy.mil.