Medium Caliber Armament - Barrel Manufacturing Capability
Closed Solicitation Posted
- Solicitation number
- W15QKN-20-R-0B2X
- Agency
- ACC Picatinny Army Contracting Command, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 333517 Machine Tool Manufacturing
Notice details come from SAM.gov. Updated .
About this opportunity
This combined synopsis/solicitation from the Department of the Army Materiel Command Contracting Command Picatinny Arsenal seeks proposals for a firm-fixed price purchase order to provide a medium caliber armament barrel manufacturing capability. Offerors are requested to provide one deep hole drilling machine, one rifling machine, and optionally one horizontal honing machine along with installation, training, and support at Picatinny Arsenal in New Jersey. Proposals are due no later than July 22, 2020 and will be evaluated for technical approach and price, with award intended within 24 months of award selection based on lowest price technically acceptable.
There is no set-aside designation for this requirement. The primary NAICS code is 333517 and PSC code is J019. The place of performance is Picatinny Arsenal in New Jersey and the period of performance is up to 24 months from award. Offerors must meet delivery, testing, and technical requirements for the barrel manufacturing equipment and provide all necessary tooling, fluids, and gauges. The budget range for this procurement is approximately $2-5 million based on market prices for the specified equipment.
Notice text
10 versions
Update #10 · Latest ·
The purpose of this amendment 0007 (posted 20 July 2020) is to provide Questions and Answers as an attachment QA AMD 0007. The period of question has now closed and final submissions are still due by 22 July 2020, 3:00 PM EST.All other details remain unchanged.
The purpose of this amendment 0006 (posted 17 July 2020) is to provide Questions and Answers as an attachment Q&A AMD 0006 and to extend the proposal submission date to 22 July 2020, 3:00 PM EST on the attached New Combo Synopsis dated 17July2020, the submission date on old Combo Synopsis is not applicable and the period of questions has closed at this time. All other details remain unchanged.
The purpose of this amendment 0005 (posted 10 July 2020) is to extend the proposal submission date to 17 July 2020, 3:00 PM EST on attached New Combo Synopsis dated 10July2020, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
The purpose of this amendment 0004 (posted 08 July 2020) is to provide Questions and Answers. Please find attachment Questions_Answers_july082020. All other details remain unchanged.
The purpose of this amendment 0003 (Posted 06 July 2020) is to correct the incorrect drawing number in Section 3, 3.1 Drawing 50MM BARREL and to change the specification states in Section 4, 4.1 general requirements, bullet #2. Please find attached New Combo Synopsis posted on 06 July 2020. All other details remain unchanged.
The Purpose of this amendment 0002 (Posted 22 June 2020) is to provide Questions and Answers. Please find attached. All other details remain unchanged.
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #9 ·
The purpose of this amendment 0006 (posted 17 July 2020) is to provide Questions and Answers as an attachment Q&A AMD 0006 and to extend the proposal submission date to 22 July 2020, 3:00 PM EST on the attached New Combo Synopsis dated 17July2020, the submission date on old Combo Synopsis is not applicable and the period of questions has closed at this time. All other details remain unchanged.
The purpose of this amendment 0005 (posted 10 July 2020) is to extend the proposal submission date to 17 July 2020, 3:00 PM EST on attached New Combo Synopsis dated 10July2020, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
The purpose of this amendment 0004 (posted 08 July 2020) is to provide Questions and Answers. Please find attachment Questions_Answers_july082020. All other details remain unchanged.
The purpose of this amendment 0003 (Posted 06 July 2020) is to correct the incorrect drawing number in Section 3, 3.1 Drawing 50MM BARREL and to change the specification states in Section 4, 4.1 general requirements, bullet #2. Please find attached New Combo Synopsis posted on 06 July 2020. All other details remain unchanged.
The Purpose of this amendment 0002 (Posted 22 June 2020) is to provide Questions and Answers. Please find attached. All other details remain unchanged.
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #8 ·
The purpose of this amendment 0005 (posted 10 July 2020) is to extend the proposal submission date to 17 July 2020, 3:00 PM EST on attached New Combo Synopsis dated 10July2020, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
The purpose of this amendment 0004 (posted 08 July 2020) is to provide Questions and Answers. Please find attachment Questions_Answers_july082020. All other details remain unchanged.
The purpose of this amendment 0003 (Posted 06 July 2020) is to correct the incorrect drawing number in Section 3, 3.1 Drawing 50MM BARREL and to change the specification states in Section 4, 4.1 general requirements, bullet #2. Please find attached New Combo Synopsis posted on 06 July 2020. All other details remain unchanged.
The Purpose of this amendment 0002 (Posted 22 June 2020) is to provide Questions and Answers. Please find attached. All other details remain unchanged.
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #7 ·
The purpose of this amendment 0004 (posted 08 July 2020) is to provide Questions and Answers. Please find attachment Questions_Answers_july082020. All other details remain unchanged.
The purpose of this amendment 0003 (Posted 06 July 2020) is to correct the incorrect drawing number in Section 3, 3.1 Drawing 50MM BARREL and to change the specification states in Section 4, 4.1 general requirements, bullet #2. Please find attached New Combo Synopsis posted on 06 July 2020. All other details remain unchanged.
The Purpose of this amendment 0002 (Posted 22 June 2020) is to provide Questions and Answers. Please find attached. All other details remain unchanged.
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #6 ·
The purpose of this amendment 0003 (Posted 06 July 2020) is to correct the incorrect drawing number in Section 3, 3.1 Drawing 50MM BARREL and to change the specification states in Section 4, 4.1 general requirements, bullet #2. Please find attached New Combo Synopsis posted on 06 July 2020. All other details remain unchanged.
The Purpose of this amendment 0002 (Posted 22 June 2020) is to provide Questions and Answers. Please find attached. All other details remain unchanged.
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #5 ·
The Purpose of this amendment 0002 (Posted 22 June 2020) is to provide Questions and Answers. Please find attached. All other details remain unchanged.
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #4 ·
The Purpose of this amendment (posted 18 June 2020) is to extend the proposal submission date to 10 July 2020, 3:00 PM EST on attached New Combo Synopsis, the submission date on old Combo synopsis is not applicable. All other details remain unchanged.
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #3 ·
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Contractor shall demonstrate the system’s ability by fabricating 2 barrels that meet the technical requirements per Drawing #302-1021-1, BARREL, 50MM BLANK at the Contractor facility prior to shipping. Drawing containing export control data/distribution markings will require contractors to provide Military Critical technical Data Agreement (DD form 2345) and Non Disclosure Agreement (NDA) must be submitted prior to receiving the drawing.
Update #2 ·
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation with Contract Data Requirement Lists (CDRLs).
Update #1 ·
This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Proposals are being requested; a written solicitation will not be issued. Please find attached Combo Synopsis/Solicitation.
Attachments
| File | Type | Posted |
|---|---|---|
| QA AMD 0007 - MED CAL ARMNT SYS BARREL MANUF EQP.docx | DOCX document | |
| QA AMD 0006 - MED CAL ARMNT SYS BARREL MANUF EQP 07162020.docx | DOCX document | |
| New Combo Synopsis dated 17July2020.docx | DOCX document | |
| New Combo Synopsis dated 10July2020.docx | DOCX document | |
| Question_Answer_July082020.docx | DOCX document | |
| New Combo Synopsis dated 06July2020.docx | DOCX document | |
| QA AMD 02 - MED CAL ARMNT SYS BARREL MANUF EQP.DOCX | DOCX document | |
| New Combo Synopsis.docx | DOCX document | |
| US_Government_NDA_Medium Caliber Armament.DOC | DOC document | |
| DD_2345_FORM.pdf | ||
| CERTIFICATE_OF_DESTRUCTION_Medium Caliber Armament.DOC | DOC document | |
| CDRL A004 Security Training.pdf | ||
| CDRL A001 Certificate of Compliance.pdf | ||
| CDRL A003 Operation and maintenance manuals.pdf | ||
| CDRL A005 Certification_Data Report.pdf | ||
| CDRL A002 Accident_Incident Report.pdf | ||
| Combo Synopsis.docx | DOCX document |
Show all 17
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity