CGC william tate FY11 dockside repairs

The United States Coast Guard Surface Forces Logistics Center, Contracting and Procurement Branch 2, IBCT Product Line intends to issue a Commercial Request for Quote (RFQ) for Dockside Repairs to the USCGC WILLIAM TATE (WLM-560), a 175 FOOT COASTAL BUOY TENDER. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1,000 employees.

The simplified acquisition will be issued as a Best Value Request for Quote (RFQ), on or about March 18, 2011. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. This requirement will be evaluated using past performance as an evaluation factor. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A HUBZONE SET-ASIDE.

A CD-ROM containing all applicable drawings is available free of charge to contractors upon request not later than three (3) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc).

The performance period will be 42 calendar days and is expected to begin on or about
20 JUL 2011. The place of performance will be the homeport of the vessel, 1 Washington Avenue, Philadelphia, PA 19147.

The scope of the acquisition is for various repairs that may include the following:

Tanks (Potable Water), Clean and Inspect
Circuit Breakers (60 Hz), Inspect and Test
Compressed Air Receivers , Clean, Inspect , and Test
Single Point Davit, Level 2 Inspect and Repair
Grey Water Piping , Clean and Flush
Sewage Piping , Clean and Flush
Main Diesel Engine (MDE) Exhaust Stack Uptakes , Commercial Clean
Ship Service Diesel Generator (SSDG) Exhaust Piping , Commercial Clean
SW Heat Exchangers , Clean , Inspect and Hydro
Tanks (Fuel), Preserve " 100% "
Warping Capstan, Level 2 Inspect and Repair
Hydraulic Power Unit Insulation Valves, Install
Crossdeck Winches, Overhaul
Hydraulic Inhaul Winch, Overhaul
Propulsion Shaft Bulkhead Seals , Upgrade
Deck Covering ( Electrical Matting ) , Renew
Tanks (Potable Water), Preserve 100%
Tanks ( Potable Water ), Preserve " Partial "
Hydraulic Chain Stoppers, level 2 Inspect and Repair
Window Wiper Modifications, Install
Deck Covering (Wet/Dry), Renew
Oil Containment Coaming Renewal
Raised Scuttle Replacement
Engine Room Bilge , Clean and Inspect
Decks - Exterior, Preserve
Buoy Crane, Level 2, Inspect and Repair
Composite Labor Rate
GFP Report
Travel and Per Diem

All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures.

For further information or questions regarding this solicitation, please contact Mrs. Lisa Dieli at (757) 628-4647, or by e-mail to Lisa.dieli@uscg.mil.