RC-06_-_Bailer_Specs.doc

31 KB Posted

Attached to
Waste Management, Composting and Recycling
Solicitation number
W91QV1-16-B-0010
Issued by

About this file

From the source

Technical Exhibit RC-06

View the file

Other files

File Type Posted
16-B-0010-00003_Amendment.pdf PDF
16-B-0010-00003_Amendment.pdf PDF
RC-05_-_Truck_Scale_Operations.doc DOC document
RC-03_-_Cardboard_Pickup_Sites.doc DOC document
RC-08_-_Office_Recycling_Data.xls XLS spreadsheet
RC-01_Refuse_Collection.xls XLS spreadsheet
RC-02_Center_Layout.doc DOC document
RC-07_-_Can_Separator_Spec.doc DOC document
RC-9_Food_Waste_Composting.docx DOCX document
Refuse_Q As.docx DOCX document
16-B-0010-P00002_Amendment.pdf PDF
RC-04_-_Cardboard_Pickup_Schedule.doc DOC document
16-B-0010-P0001_Refuse_Mod_1.docx DOCX document
16-B-0010_Solid_Waste_Solicition.docx DOCX document
Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

TECHNICAL EXHIBIT RC-6

BALER AND CONVEYOR BELT SPECIFICATIONS

1. SCOPE. The Contractor shall provide a horizontal baler, in-ground conveyor, and rotary fluffer for use at the Fort Belvoir Recycling Center which meets the specifications listed herein.

2. BALER REQUIREMENTS. The baler shall be the model Economy 5042 or equivalent with the following requirements:

2.1 The baler shall have at least 60 horsepower.

2.2 The baler shall be capable of processing cardboard, newspaper, high grade paper and plastics.

2.3 The baler shall have a main ram cylinder that is at least nine inches long.

2.4 The main ram compression shall be at least 105 PSI.

2.5 The baler shall have the capability to create cardboard bales weighing at least 800 lbs.

2.6 Power requirement (VAC/phase) for the baler shall be 460/3.

2.7 The baler feed opening shall be at least 50" x 42".

2.8 The baler shall be able to produce a minimum of 60 inch bales.

2.9 The baler must feature an automatic tier mechanism.

2.10 The baler shall have a heavy duty shearer in the extrusion chamber.

2.11 The baler shall have replaceable wear surface in the extrusion chamber.

2.12 The baler shall have an air/oil heat exchanger to prevent the oil in the hydraulic system from over heating.

2.13 The baler shall use standard electronics parts that are easily accessible, such as those made by Allen Bradley.

2.14 The baler shall use standard hydraulics parts that are easily accessible, such as those made by Vicker.

2.15 The baler shall have a dual tension system and a high level eye so it can produce a very tight bale regardless of the item being baled.

2.16 The company manufacturing the baler shall have at least ten years of experience in making balers.

3. CONVEYOR REQUIREMENTS. The in-ground conveyor shall be a Shmidt or equivalent, possessing the following, as a minimum:

3.1 The conveyor shall have a forty-eight inch wide rubber belt (ten feet in-floor length).

3.2 The conveyor shall be a drag chain type in which material is supported on a rubber belt and the belt is affixed to a chain which is dragged on a polyethylene track.

4. FLUFFER REQUIREMENTS. The rigid rotary fluffer shall be at least 15-20 horsepower.

4.1 The fluffer shall be capable of being be moved out of the way when not needed.

File details come from the government source that posted it. Updated .