W912QR20R0051-0001.pdf

CIVIL/OPS/ENVIRONMENTAL BR

ATTN: JOHN BUTTS

600 DR M L KING JR PL RM 821

LOUISVILLE KY 40202-2236

W22W9K00690143

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Solicitation W912QR20Q0051 to extend permanent electrical pow er to the dow nstream end of the locks for Olmsted Lock and Dam, Olmsted, IL is hereby modified as follow s:

a. This amendment is to revise the draw ings for Sheet CS101, Site Plan and CS501, Concrete Transformed Pad Description, see attached revisions.

b. Incorporate updated Wage Determination IL20200016 to the solicitation.

c. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

1 25

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X W912QR20Q0051

X 9B. DATED (SEE ITEM 11)

20-Apr-2020

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO.

5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

23-Apr-2020

CODE

U. S. ARMY ENGINEER DISTRICT, LOUISVILLE

600 DR. MARTIN LUTHER KING, JR. PLACE

ROOM 821

LOUISVILLE KY 40202-2239

W912QR 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE 964860

FACILITY CODECODE

EMAIL:TEL:

3 314

331 332

14'

SEE DETAIL SHEET CS501

TOP OF PAD - EL 340

8" REINFORCED CONCRETE PAD

EXISTING BURIED ANCHOR POINTS

OLMSTED BM#6

S O

L

IC

IT

A T

IO

N N

O

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N M

A R

K

S

IZ

E

S U

B M

IT

T E

D B

Y

D A

T E

C O

N T

R A

C T N

O

C H

E C

K E

D B

Y

D R

A W

N B

Y

IS

S

U E D

A T

E

SHEET ID

A

B

C

D

E

F

G

1 98765432

®of Engineers

US Army Corps

U .S

A R

M Y C

O R

P S O

F E

N G

IN

E E

R S

A N

S I

D

L O

U

IS

V

IL

L E D

IS

T R

IC

T

D

R

M A

R T

IN

L

U T

H E

R K

IN

G J

R P

L A

C E

L O

U

IS

V

IL

L E

K E

N T

U C

K Y

O L

M S

T E

D

IL

H

IG

H W

A T

E R M

O O

R

IN

G E

L E

C T

R

IC

A L

F Y P

CERTIFIED FINAL

A P

R

IL

PB

T

N 325 838.844

E 1 033 175.972

GENERAL SHEET NOTES

LEGEND

NEW REINFORCED CONCRETE PAD

EXISTING SECURITY FENCE

SEE SHEET ES101

NEW ELECTRICAL LINE

ON ALL SIDES.

EXTEND FOR A MINIMUM OF 6" FROM FACE OF EQIPMENT

ELECTRICAL EQUIPMENT USED. THE CONCRETE PAD SHALL

DETERMINED BY THE CONTRACTOR AND DIMENSIONS OF

8. ACTUAL LINEAR DIMENSIONS OF CONCRETE PAD SHALL BE

TO THE GOVERNMENT.

TO THE FENCE SHALL BE REPAIRED AT NO ADDITIONAL COST

CONCRETE OVER SECURITY FENCE. ANY DAMAGE CAUSED

CONCRETE DUCT BANK MAY ALSO BE INSTALLED BY PUMPING

AND RETENSIONED AFTER WORK IS COMPLETE.

ES101 PROVIDED SECURITY FENCE IS SPLICED TOGETHER

TO INSTALL CONCRETE DUCT BANK AS SHOWN ON SHEET

7. AN ACCESS HOLE MAY BE CUT IN THE SECURITY FENCE

WITH COMPACTED SOIL AND RIP RAP REPLACED IN KIND.

6. TRENCHES CUT IN RIP RAP DITCH SHALL BE BACKFILLED

ILLINOIS SLOPE MIXTURE.

ADJACENT AREAS WITH SEED MIX CLASS 3 NORTHERN

DISTURBED AREAS SHALL BE RESEEDED TO MATCH

COMPACTED SOIL FILL TO MATCH EXISTING GRADE.

5. TRENCHES CUT IN SOIL SHALL BE BACKFILLED WITH

AGGREGATE TO MATCH EXISTING GRADE.

COMPACTED FILL. TOP 6" SHALL BE 3/4" DENSE GRADED

4. TRENCHES CUT IN GRAVEL SHALL BE BACKFILLED WITH

CONSTRUCTED TO ELEVATION 340 (OHIO RIVER DATUM).

3. TOP OF 8" REINFORCED CONCRETE PAD SHALL BE

CONCRETE PAD AND GRADING DETAILS.

2. SEE DETAIL SHEETS CS501, ES501, AND ES502 FOR

SURVEY FEET, UNLESS OTHERWISE NOTED.

POINT DESCRIPTION. ALL MEASUREMEMENTS ARE IN US

OHIO RIVER DATUM. SEE SHEET CS501 FOR CONTROL

COORDINATES (NAD27) AND VERTICAL DATUM IS

HORIZONTAL DATUM IS KENTUCKY SOUTH STATE PLANE

PROVIDED BY OLMSTED OPERATIONS PERSONNEL.

1. CONSTRUCTION SHOWN BASED ON SURVEY DATA

A1

SCALE: 1"=60'

CS101

J J

O N

E S

J J

O N

K E

N E

T T

60' 120'0

K

D O

R S

C H

S

IT

E P

L A

N

SITE PLAN

N O

R T H

A P

R

A M

D T .0

-R

E V

IS

E D G

E N

E R

A L N

O T

E

(T

Y P

4000 PSI CONCRETE

CONTROL JOINT

A1

NTS

¼"

8"

AGGREGATE (DGA) SUBBASE

6" NEW DENSE GRADED

SEE NOTE #2

NEW CONCRETE PAD

WIRE FABRIC

6 X 6 - W2.9 X W2.9

GRAVEL SUBGRADE

COMPACTED

CONCRETE PAD.

5. DGA FILL SHALL EXTEND A MINIMUM OF 12" BEYOND LIMITS OF

4. ENSURE 1/8":1'-0" MAXIMUM SLOPE TO DRAIN WATER OFF OF PAD.

A MINIMUM EMBEDMENT OF 3.5".

3. STAINLESS STEEL ANCHORS FOR SUPPORT FRAME SHALL HAVE

4' INTERVALS BOTH LONGITUDINALLY AND LATERALLY.

2. CONTROL JOINTS SHALL BE SPACED AT A MINIMUM OF

CONCRETE PAD AND ENSURE 3" COVER FROM TOP OF SLAB.

1. PROVIDE 6 X 6 (W2.9 X W2.9) WIRE FABRIC FOR REINFORCEMENT OF

NOTES:

ELECTRICAL EQUIPMENT PEDESTAL

CONCRETE TRANSFORMER AND

CONCRETE TRANSFORMER AND ELECTRICAL EQUIPMENT PEDESTAL DETAILS

A5

NTS

OLMSTED 6 CONTROL POINT DESCRIPTION

S O

L

IC

IT

A T

IO

N N

O

D E

S

IG

N E

D B

Y

D E

S C

R

IP

T

IO

N M

A R

K

S

IZ

E

S U

B M

IT

T E

D B

Y

D A

T E

C O

N T

R A

C T N

O

C H

E C

K E

D B

Y

D R

A W

N B

Y

IS

S

U E D

A T

E

SHEET ID

A

B

C

D

E

F

G

1 98765432

®of Engineers

US Army Corps

U .S

A R

M Y C

O R

P S O

F E

N G

IN

E E

R S

A N

S I

D

L O

U

IS

V

IL

L E D

IS

T R

IC

T

D

R

M A

R T

IN

L

U T

H E

R K

IN

G J

R P

L A

C E

L O

U

IS

V

IL

L E

K E

N T

U C

K Y

O L

M S

T E

D

IL

H

IG

H W

A T

E R M

O O

R

IN

G E

L E

C T

R

IC

A L

F Y P

CERTIFIED FINAL

A P

R

IL

LRL_Screen.dscriptLRL_pdf.pltcfg5:58:43 PM 4/22/2020

...\AEC_WS_001\Workspace\Projects\COVID19-PROJECTS\03_Sheets\_112574_CS501.dgn

A

C S h e e tS e e d .d g n

A

N S I

D

N O

T T

O S

C A

L E

D E

T A

IL

S

K

D O

R S

C H

J J

O N

E S

J J

O N

E S

CS501

C O

N C

R E

T E T

R A

N S

F O

R M

E R P

A D

A P

R

A M

D T .0

-A

D D

E D D

E T

A

IL

A

1 1

W912QR20Q0051

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION 00 70 00 - CONDITIONS OF THE CONTRACT

The following have been added by full text:

WAGE RATES

"General Decision Number: IL20200016 04/03/2020

Superseded General Decision Number: IL20190016

State: Illinois

Construction Types: Heavy and Highway

Counties: Alexander, Clay, Crawford, Edwards, Effingham, Fayette, Franklin, Gallatin, Hamilton, Hardin, Jackson, Jasper, Jefferson, Johnson, Lawrence, Marion, Massac, Perry, Pope, Pulaski, Randolph, Richland, Saline, Union, Wabash, Wayne, White and Williamson Counties in Illinois.

CRAWFORD, EFFINGHAM & JASPER COUNTIES:

HEAVY CONSTRUCTION PROJECTS (including Sewer & Water Line Construction & Drainage Projects) & HIGHWAY CONSTRUCTION PROJECTS (excluding tunnels, building structures in rest area projects, and railroad construction; bascule, suspension & spandrel arch bridges; bridges designed for commercial navigation; bridges involving marine construction, other major bridges).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2020. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the

Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/03/2020 1 01/10/2020 2 01/24/2020 3 02/14/2020 4 02/21/2020 5 03/27/2020 6 04/03/2020

CARP0243-007 05/01/2017

CRAWFORD, EFFINGHAM, and JASPER COUNTIES

Rates Fringes

CARPENTER........................$ 33.00 25.12

PILEDRIVERMAN....................$ 34.00 25.12

CARP0634-002 05/01/2019

CLAY, EDWARDS, FAYETTE, LAWRENCE, MARION, RICHLAND, and WABASH

COUNTIES

Rates Fringes

CARPENTER........................$ 36.82 17.77

CARP0636-001 05/01/2019

HAMILTON, JEFFERSON, WAYNE, and WHITE COUNTIES

Rates Fringes

CARPENTER........................$ 36.82 17.77

DIVERS (receive 1 1/2 times carpenter rate plus fringes and $25 per day for equipment)

CARP0640-005 05/01/2019

ALEXANDER, FRANKLIN, HARDIN, MASSAC, JACKSON, PERRY, POPE,

JOHNSON, GALLATIN, PULASKI, SALINE, UNION, and WILLIAMSON

CARPENTER........................$ 36.74 17.77

DIVERS (Receive 1 1/2 times Carpenter's rate plus fringe benefits and $25.00 per day for equipment)

CARP0662-001 05/01/2019

RANDOLPH COUNTY

Rates Fringes

CARPENTER........................$ 39.58 17.77

ELEC0016-002 01/01/2020

WABASH COUNTY

Rates Fringes

ELECTRICIAN......................$ 37.87 17.78

ELEC0051-004 01/06/2020

FAYETTE COUNTY (North of Avena, Bear Grove, Sefton, and Sharon

TWPS)

Line Construction Groundman/Equipment Operator (All crawler type equipment larger than D-4, 15 ton crane or larger).....$ 46.09 32.5%+6.50 Groundman/Truck Driver......$ 34.95 32.5%+6.50 Lineman and Substation Technician..................$ 51.29 32.5%+6.50

ELEC0146-004 06/01/2016

EFFINGHAM (Banner, Bishop, Douglas, Liberty, Lucas, Moccasin, St. Francis, Summit, & Teulopolis TWPS), AND FAYETTE (Hurricane, S. Hurricane, Ramsey, Bowling Green, Carson, & Loudon TWPS) COUNTIES

ELECTRICIAN......................$ 36.27 16.36

ELEC0309-004 09/02/2019

RANDOLPH COUNTY (Red Bud Twp)

ELECTRICIAN......................$ 41.83 32.41%+7.99

ELEC0309-009 12/02/2019

RANDOLPH COUNTY (Red Bud Township)

Rates Fringes

LINE CONSTRUCTION

Cable Splicer; Lineman Welder......................$ 57.19 43.67% Groundman Equipment Operator....................$ 47.37 43.67% Groundman Truck Driver......$ 38.66 43.67% Groundman...................$ 35.36 43.67% Lineman.....................$ 54.47 43.67%

ELEC0702-001 09/01/2019

ALEXANDER, CLAY, EDWARDS, EFFINGHAM (Excluding Banner, Bishop, Douglas, Liberty, Lucas, Moccasin, St. Francis, Summit and Teulopolis TWPS), FAYETTE (Excluding Hurricane, S. Hurricane, Ramsey, Bowling Green, Carson and Loudon TWPS), FRANKLIN, GALLATIN, HAMILTON, HARDIN, JACKSON, JEFFERSON, JOHNSON, MARION, MASSAC, PERRY, POPE, PULASKI, SALINE, UNION, WAYNE, WHITE, AND WILLIAMSON COUNTIES

ELECTRICIAN......................$ 44.62 22.95

ELEC0702-002 12/30/2019

ALEXANDER, CLAY, CRAWFORD, EDWARDS, EFFINGHAM, FRANKLIN,

FAYETTE (Excludes portion North Avena), GALLATIN, HAMILTON, HARDIN, JACKSON, JASPER, JEFFERSON, JOHNSON, LAWRENCE, MARION, MASSAC, PERRY, POPE, PULASKI, RANDOLPH (Except Red Bud Twps), RICHLAND, SALINE, UNION, WABASH, WAYNE, WHITE, AND WILLIAMSON

COUNTIES;

CLARK, COLES (Southern Half), CUMBERLAND, MOULTRIE (Whitley TWP), and SHELBY (Except West of Holland, Prairie, Richland, & Windsor TWPS) COUNTIES;

BOND (Eastern Half), and WASHINGTON (OKAWVILLE & VENDY TWPS)

Line Construction Groundman - Class A.........$ 32.13 29%+7.75 Groundman - Equipment Operator Class II (all other equipment)............$ 39.13 29%+7.75 Heavy - Equipment Operator Class I (all crawler type equipment D-4 and larger)...$ 43.88 29%+7.75 Lineman.....................$ 55.15 29%+7.75

ELEC0702-016 09/01/2019

BUILDING

ALEXANDER, BOND (Eastside), CLAY, CLINTON (Eastside), EDWARDS, EFFINGHAM (Southwestern side), FAYETTE (Southside), FRANKLIN, GALLATIN, HAMILTON, HARDIN, JACKSON, JEFFERSON, JOHNSON, MARION, MASSAC, PULASKI, PERRY, POPE, RANDOLPH (Southeastern side), SALINE, UNION, WASHINGTON (Southeastern side), WAYNE, WHITE, and WILLIAMSON COUNTIES

ELECTRICAL LOW VOLTAGE WIRING

INSTALLER........................$ 35.89 14.27

Installation, service and maintenance of low-voltage systems which utilizes the transmission and/or transference of voice, sound, vision, or digital for commercial, education, security and entertainment purposes for the following: TV monitoring and surveillance, background/foreground music, intercom and telephone interconnect, field programming, inventory control systems, microwave transmission, multi-media, multiplex, radio page, school, intercom and sound burglar alarms and low voltage master clock systems.

ELEC0725-004 03/01/2019

CRAWFORD, JASPER, LAWRENCE, AND RICHLAND COUNTIES

Rates Fringes

ELECTRICIAN......................$ 36.98 19.66

* ENGI0318-001 04/01/2020

ALEXANDER, FRANKLIN, GALLATIN, HAMILTON, HARDIN, JACKSON,

JOHNSON, MASSAC, POPE, PULASKI, SALINE, UNION, WHITE, AND

WILLIAMSON COUNTIES

OPERATOR: Power Equipment Class A.....................$ 35.15 25.75+a Class B.....................$ 33.25 25.75+a Class C.....................$ 25.85 25.75+a

River Class 1....................$ 35.25 25.75+a Class 2....................$ 31.80 25.75+a

Class A: All Off Road Material Hauling Equipment, All Terrain Crane, Articulated Dump, Asphalt Machine Spreader, Asphalt Plant Assistant Operator, Asphalt Plant Operator, Asphalt Widener, Assistant Operator on Rotomills, Autograder, Automatic Slipform Pavers, Backend Man on Asphalt Machine, Backhoes, Barrel Grappler Devices (All), Blacksmith, Blade Operators (All), Boat Operators (all) Bridges, Boat Pilots requiring certification and/or licensing, Dams & Waterways, Boilers, Boom or Winch Cat, Boom or Winch Type Trucks, Boring Machines-Horizontal, Clamshell, Orange Peel Operator, Concrete Breaker, Concrete Groover, Concrete Grinder, Concrete Curb Machine, Concrete Finish Machine or Spreader Operator, Concrete Mixer Paver, Concrete Pump Truck, Concrete Plant Operator, Concrete Wheel Saw Operators, Cranes(All) Truck/Track/Rubber, Crane (Overhead) Operator, Derrick Guy or Derrick Trucks, Ditching Machines (All), Dozer Operators, Dragline or Shovel Operators, Dredge Booster Pump, Dredge Engineman, Dredge Operator/Leverman, Drill Cat w/Compressor Mounted, Drilling or Boring Machine Rotary-Self-Propelled, Endloaders (All) Track/Rubber Elevating Grader, Flexplane, Forklifts/Tele-Handlers (All), Geothermal Well Drilling, GPS on machines already under the jurisdiction of Local 318, Gradall; Greasers, Heavy Equipment Robotics Operator, Hi-Lift, Hoists, Hosting Engine, Horizontal Directional Drill Operator, Incinerators (Haz-Mat only), Laser Screed, Locomotive/Operator, Master Mechanic, Mixers 21 cu. ft. or over, Motor Patrol, Pile driver operator, Pulls & Scrapers, Power Pac & Controls (Pile Driving), Pug mill, Pulverizer or Tillers, Push Cats, Quad Trac, Rotomills, Rotating Cab Forklifts, Rubber Tired Farm Tractor with Attachments over 1/2 yd., Self-Propelled Chip Spreader, Self-Propelled Roller w/Attachments, Shot Blaster/Bridge Deck, Shuttle Buggie, Side booms, Skid loader (Skid steers), Skimmer Scoop, Spyder Crane, Stationary Rock Slinger, Trackhoe and all attachments, Trench Machine Opeator, Tuggers, Ultra High Pressure Water Jet Cutting Machine, Vacuum, Vacuum Blasting Machine Operator, Vac Jet, Welders, Well or Caisson Drills, Well Point Pumps-2 or more, Wood Chipper w/Tractor.

Class B: Oilers classified as Assistant Operators, Air Track Drill/Compressor, All Machines used to Sweep, Clean, Broom or remove debris or snow, Any type tractor pulling Roller or Disc, Automatic Bins or Scales w/Compressor or Generator, Bulk Cement Plant w/Separate Compressor, Concrete Curb Machine requiring Electronics, Concrete Plant Assistant Operators, Concrete or Pump crete Pumps, Deck Hand on Boats, Dredge Assistant Operator/Mate, Power Broom, Self-Propelled Roller/Compactor, Straw Mulcher Blower, Stump Cutter Machine, Two Air Compressors (220 CFM or over), Two Air Track Drills. Air Compressor w/valve driving piling, Assistant operator (where required refer to article vii section 9), Elevator Operator, Form Grader, Man Lift (scissor lift) when lifting materials, Pildriver activating air or hydraulic valve regardless of location, Rubber-tired farm type tractor w/Blade/Bulldozer/Auger/Hi-lift of 1/2 yard or less, Self-propelled concrete saw, Self-propelled robotics roller in use two continuous hours or more shall be manned by an operating engineer, Self-propelled vibrator, Truck crane assistant operator, Two Conveyors.

Class C: Air Compressor (220 CFM or over) one, Air Track Drill one, Automatic Bin, Belt Drag Machine, Bulk Cement Plant w/built-in compressor running off same motor or electric motor, fireman or switchman, Mechanic in permanent shops without separate signed Collective Bargaining Agreements (Nov. 1 through March 31), Mechanical plasterer applicator, Pipe Tract Jack, Power Broom, Self-propelled from tamper, Trac-Air, Mixers - less than 21 cu.ft., Mortar Mixer w/ski or pump, Mud Jacks, one well point pump, Wood Chipper.

One Operating Engineer may operate or maintain any combination of the following pieces of equipment, not to exceed four (4), which shall be within reasonable distance;

such combination may include the equipment in this classification: Air Compressor (under 220 CFM) Four, Light Plants, Generators, Pumps, Conveyors, Motor Driven Heaters (2), Welding Machines, Ulmac or Equal Spreader

River Class 1: All Off Road Material Hauling Equipment, All Terrain Crane, All Power Boat Operators, Articulated Dump, Asphalt Machine Spreader, Asphalt Plant Operator, Asphalt Widener, Autograder, Automatic Slipform Pavers, Backhoes, Barrel Grappler Devices (All), Blacksmith, Blade Operators (All), Boat Pilots requiring certification and or licensing, Boat Operators (all) Bridges, Dams & Waterways, Boilers, Boom or Winch Cat, Boom or Winch Type Trucks, Boring Machines-Horizontal, Clamshell, Orange Peel Operator, Concrete Breaker, Concrete Curb Machine, Concrete Finish Machine or Spreader Operator, Concrete Mixer Paver, Concrete Pump Truck, Concrete Plant Operator, Concrete Wheel Saw Operators, Cranes(All) Truck/Track/Rubber, Crane (Overhead) Operator, Derrick Guy or Derrick Trucks, Ditching Machines (All), Dozer Operators, Dragline or Shovel Operators, Dredge Booster Pump, Dredge Engineman, Dredge Operator/Leverman, Drill Cat w/Compressor Mounted, Drilling or Boring Machine Rotary-Self-Propelled, Endloaders (All) Track/Rubber Elevating Grader, Flexplane, Forklifts/Tele-Handlers (All), Geothermal Well Drilling, GPS on machines already under the jurisdiction of Local 318, Gradall; Greasers, Heavy Equipment Robotics Operator, Hi-Lift, Hoists, Hosting Engine, Horizontal Directional Drill Operator, Incinerators (Haz-Mat only), Laser Screed, Locomotive/Operator, Master Mechanic, Mixers 21 cu. ft. or over, Motor Patrol, Piledriver operator, Pulls & Scrapers, Power Pac & Controls (PileDriving), Pug mill, Pulverizer or Tillers, Push Cats, Quad Trac, Rotating Cab Forklifts, Rotomills, Rubber Tired Farm Tractor with Attachments over 1/2 yd., Self-Propelled Chip Spreader, Self-Propelled Roller w/Attachments, Shuttle Buggie, Side booms, Skid loader (Skidsteers), Skimmer Scoop, Spyder Cranes, Trackhoe and all attachments, Trench Machine Opeator, Tuggers, Ultra High Pressure Water Jet Cutting Machine, Vacuum, Vacuum Blasting Machine Operator, Vac Jet, Welders, Well or Caisson Drills, Well Point Pumps-2 or more, Wood Chipper w/Tractor.

River Class 2: Assistant Operators required on All terrain cherry picker w/over 40 ton lifting capacity, Crane, Deckhand on all rivers, lakes, and tributaries, Dinky or standard locomotive, Ditching machine (80 h.p. and over), Dragline, Dredge, Gradall, Guy Derrick, Assitant operators or firman on crane, Piledriver, Shovel, Trenching Machine, Truck Crane.

Footnote A - Hazardous Waste Premium: Level (A)-receive $3.00 above rate; Level (B)-receive $2.00 above rate; Level (C)-receive $1.50 above rate; Level (D)-receive $1.00 above rate.

ENGI0520-002 08/01/2017

FAYETTE, JEFFERSON, MARION, PERRY, and RANDOLPH COUNTIES

Rates Fringes

POWER EQUIPMENT OPERATOR

Group 01....................$ 36.85 30.70 Group 02....................$ 35.72 30.70 Group 03....................$ 31.24 30.70 Group 04....................$ 31.30 30.70 Group 05....................$ 30.97 30.70 Group 06....................$ 39.40 30.70 Group 07....................$ 39.70 30.70 Group 08....................$ 39.33 31.35 Group 09....................$ 37.20 31.35 Group 10....................$ 38.20 31.35 Group 11....................$ 38.20 31.35 Group 12....................$ 39.20 31.35

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Cranes, Draglines, Shovels, Skimmer Scoops, Clamshells or Derrick Boats, Pile Drivers, Crane-Type Backhoes, Asphalt Plant Operators, Concrete Plant Operators, Dredges, Asphalt Spreading Machines, Screws on Asphalt Spreading Machines, All Locomotives, Cable Ways or Tower Machines, Hoists, Hydraulic Backhoes, Ditching Machines, or Backfiller, Cherrypickers, overhead Cranes, Roller, Steam or Gas, Concrete Pavers, Excavator Concrete Breakers, Concrete Pumps, Bulk Cement Plants, Cement Pumps, DerrickType Drills, Boat Operators, Motor Graders or Pushcats, Scoops or Toumapulls, Bulldozers, Endloaders or Fork Lifts, Power Blade or Elevating Graders, Winch Cats, Boom or Winch Trucks or Boom Tractors, Pipe Wrapping or Painting Machines, Asphalt Plant Engineer, Journeyman Lubricating Engineer, Drills (other than derrick type), Mud Jacks, or Well Drilling Machines, Boring Machines or Track Jacks, Mixers, Conveyors (two), Air Compressors (two) Water Pumps, regardless of size (two), Welding Machines (two), Siphons or Jets (two), Winch Head or Apparatuses (two), Light Plants (two), Waterblasters (two), all Tractors, regardless of size (straight tractor only), Fireman on Stationary Boilers, Automatic Elevators, Form Grading Machines, Finishing Machines, Power Sub-Grader or Ribbon Machines, Longitudinal Floats, Distributor Operators on Trucks, Winch Heads or Apparatuses (one), Mobil Track air and heaters (two to five), Heavy Equipment Greaser, Relief Operator, Assistant Master Mechanic and Heavy Duty Mechanic, concrete saws of all types and sizes with their attachments, gobhoppers, excavators all sizes, the repair, greasing, and fueling of all diesel hammers, the operation, set-up and cleaning ofbidwells, concrete placement booms, the alterations, repair of all barges, water blasters of all sizes and their clutches, mobile lifts, hydraulic jacks where used for hoisting, diesel or gas powered flashing sings used for traffic control, micro pavers, log skiders, iceolators used on and off of pipeline, condor cranes, drill rigs of all sizes, bow boats, survey boats, ross carriers, bob-cats and all their attachments, skid steer loaders and all their attachments, creter crane, direct drive electric motors the bolting and unbolting the adjusting and shimming, (dewateringjobs, whirley crane, conveyor belts) etc., batch plants (all sizes), roto mills, conveyors systems of any size and any configuration, hydroseeders and strawblowers all sizes, operation, repair, service of all vibratory hammers, all power pacs and their controls regardless of location, curtains or brush burning machines, stump cutter machines, grout machines regardless of size, Nail launchers when mounted on a machine or self-propelled, con-cover machines, Goldhofer and similar S.P.M.T. (self-propelled modular transpmiers) heavy transport units and all Operators (except those listed below).

Group 2: Assistant Operators

GROUP 3: Air Compressor One; Water Pump regardless of size One; Welding Machine One; 1-Bag Mixer One; Conveyor One;

Siphon or Jet; Light Plant One; Heater One; Immobile Track Air One

GROUP 4: Firemen on Whirlies and Asphalt Spreader Oiler;

Heavy Equipment Oilers; Truck Cranes; Monigans; Large over

65 tons capacity; Concrete Plant OIler and Black Top Plant Oiler

GROUP 5: Oilers

GROUP 6: Operators on equipment with Booms, including Jibs, 100 ft and over, but less than 150 ft

GROUP 7: Operators on equipment with Booms, including Jibs, 150 ft and over, but less than 200 ft

GROUP 8: Operators on equipment with Boomns, including Jibs, 200 ft and over; Tower Cranes, and Whirley Cranes

GROUP 9: Certified crane Operators, Below 17.5 tons, when requested by the Contractor or required by the Owner.

GROUP 10: Certified crane Operators 17.5 tons and above, when requested by the Contractor or required by the Owner.

GROUP 11: Master Mechanic

GROUP 12: Licensed Boat Pilot

ENGI0520-004 08/01/2019

INCLUDING BUILDING CONSTRUCTION ON HEAVY INDUSTRIAL SITES &

HEAVY CONSTRUCTION EXCEPT DREDGING AND RIVER WORK

FAYETTE, JEFFERSON, MARION, PERRY, and RANDOLPH COUNTIES

POWER EQUIPMENT OPERATOR

Group 01....................$ 38.80 33.05 Group 02....................$ 37.67 33.05 Group 03....................$ 33.19 33.05 Group 04....................$ 33.25 33.05 Group 05....................$ 32.92 33.05 Group 06....................$ 41.35 33.05 Group 07....................$ 41.65 33.05 Group 08....................$ 41.93 33.05 Group 09....................$ 39.80 33.05 Group 10....................$ 40.80 33.05 Group 11....................$ 40.80 33.05 Group 12....................$ 41.80 33.05

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Cranes, Draglines, Shovels, Skimmer Scoops, Clamshells or Derrick Boats, Pile Drivers, Crane-Type Backhoes, Asphalt Plant Operators, Concrete Plant Operators, Dredges, Asphalt Spreading Machines, Screws on

Asphalt Spreading Machines, All Locomotives, Cable Ways or Tower Machines, Hoists, Hydraulic Backhoes, Ditching Machines, or Backfiller, Cherrypickers, overhead Cranes, Roller, Steam or Gas, Concrete Pavers, Excavator Concrete Breakers, Concrete Pumps, Bulk Cement Plants, Cement Pumps, Derrick-Type Drills, Boat Operators, Motor Graders or Pushcats, Scoops or Tournapulls, Bulldozers, Endloaders or Fork Lifts, Power Blade or Elevating Graders, Winch Cats, Boom or Winch Trucks or Boom Tractors, Pipe Wrapping or Painting Machines, Asphalt Plant Engineer, Journeyman Lubricating Engineer, Drills (other than derrick type), Mud Jacks, or Well Drilling Machines, Boring Machines or Track Jacks, Mixers, Conveyors (two), Air Compressors (two) Water Pumps, regardless of size (two), Welding Machines (two), Siphons or Jets (two), Winch Head or Apparatuses (two), Light Plants (two), Waterblasters (two), all Tractors, regardless of size (straight tractor only), Fireman on Stationary Boilers, Automatic Elevators, Form Grading Machines, Finishing Machines, Power Sub-Grader or Ribbon Machines, Longitudinal Floats, Distributor Operators on Trucks, Winch Heads or Apparatuses (one), Mobil Track air and heaters (two to five), Heavy Equipment Greaser, Relief Operator, Assistant Master Mechanic and Heavy Duty Mechanic, concrete saws of all types and sizes with their attachments, gob-hoppers, excavators all sizes, the repair, greasing, and fueling of all diesel hammers, the operation, set-up and cleaning of bidwells, concrete placement booms, the alterations, repair of all barges, water blasters of all sizes and their clutches, mobile lifts, hydraulic jacks where used for hoisting, diesel or gas powered flashing signs used for traffic control, micro pavers, log skiders, iceolators used on and off of pipeline, condor cranes, drill rigs of all sizes, bow boats, survey boats, ross carriers, bob-cats and all their attachments, skid steer loaders and all their attachments, creter crane, direct drive electric motors the bolting and unbolting the adjusting and shimming, (dewateringjobs, whirley crane, conveyor belts) etc., batch plants (all sizes), roto mills, conveyors systems of any size and any configuration, hydroseeders and straw-blowers all sizes, operation, repair, service of all vibratory hammers, all power pacs and their controls regardless of location, curtains or brush burning machines, stump cutter machines, grout machines regardless of size, Nail Launchers when mounted on a machine or self-propelled, con-cover machines, Goldhofer and similar S.P.M.T. (self-propelled modular transporters) heavy transport units and all Operators (except those listed below).

GROUP 2: Assistant Operators

GROUP 3: Air Compressors (one), Water Pumps, regardless of size (one), Water-blasters (one), Welding Machine (one), Mixers (one bag), Conveyor (one), Siphon or Jet (one), Light Plant (one), Heater (one), Immobile Track Air (one), and Self-Propelled Walk Behind Rollers.

GROUP 4: Fireman on Whirlies and Heavy Equipment Oilers, Truck Cranes, Dredges, Monigans, Large Cranes - (Over 65-ton rated capacity) Concrete Plant Oiler, Blacktop Plant oiler and Creter Crane Oiler (when required), barge tenders, oilers on drill rigs used for caisson or for pile driving.

GROUP 5: Oilers

GROUP 6: Operators on equipment with Booms, including Jibs, 100 ft and over, but less than 150 ft

GROUP 7: Operators on equipment with Booms, including Jibs, 150 ft and over, but less than 200 ft

GROUP 8: Operators on equipment with Boomns, including Jibs, 200 ft and over; Tower Cranes, and Whirley Cranes

GROUP 9: Certified crane Operators, Below 17.5 Tons, when requested by the Contractor or required by the Owner

GROUP 10: Ce1iified crane Operators 17.5 Tons and above, when requested by the Contractor or required by the Owner

GROUP 11: Master Mechanic

GROUP 12: Licensed Boat Pilot

ENGI0841-004 04/01/2019

CLAY, CRAWFORD, EDWARDS, EFFINGHAM, JASPER, LAWRENCE, RICHLAND,

WABASH, and WAYNE COUNTIES

OPERATOR: Power Equipment

GROUP 1.....................$ 41.65 22.00

GROUP 2.....................$ 26.55 22.00

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Power Cranes, Draglines, Derricks, Shovels, Gradalls, Mechanics, Tractor Highlift, Tournadozer, Concrete Mixers with Skip, Tournamixer, Two-Drum Machine, One-Drum Hoist with Tower or Boom, Cableways, Tower Machines, Motor Patrol, Boom Tractor, Boom or Winch Truck, Winch or Hydraulic Boom Truck, Truck Crane, Tournapull, Tractor Operating Scoops, Bulldozer, Push Tractor, Asphalt Planer, Finishing Machine on Asphalt, Large Rollers on Earth, Rollers on Asphalt Mix, Ross Carrier or Similar Machine, Gravel Processing Machine, Asphalt Plant Engineer, Paver Operator, Farm Tractor with Half Yard Bucket and/or Backhoe Attachments, Dredge Engineer, or Dredge Operator, Central Mix Plant Engineer, CMI or Similar Type Machine, Truck or Skid Mounted Concrete Pump, Tower Crane, Engine or Rock Crusher Plant, Concrete Plant Engineer, Ditching Machine with Dual Attachment, Tractor Mounted Loaders, Cherry Picker, Hydro Crane, Standard or Dinkey Locomotives, Scoopmobiles, Euclid Loader, Soil Cement Machine, Back Filler, Elevating Machine, Power Blade, Drilling Machines Including Well Testing, Caissons, Shaft or Any Similar Type Drilling Machines, Motor Driven Paint Machine, Pipe Cleaning Machine, Pipe Wrapping Machine, Pipe Bending Machine, Apsco Paver, Boring Machine, (Equipment Greased), Barber- Greene Loaders, Formless Paver, (Well Point System), Concrete Spreader, Hydra Ax, Span Saw and Similar types, Marine Scoops, Brush Mulcher, Brush Burner, Mesh Placer, Tree Mover, Helicopter Crew (3), Piledriver - Skid or Crawler, Stump Remover, Root Rake, Tug Boat Operator, Refrigerating Machine, Freezing Operator, Chair Cart-Self Propelled, Hydra Seeder, Straw Blower, Power Sub Grader, Bull Float, Finishing Machine, Self-Propelled Pavement Breaker (Backhoe Attached), Lull (or Similar Type Machine), Two Air Compressors, Compressors Hooked in Manifold, Overhead Crane, Chip Spreader, Mud Cat, Sull-Air Fork Lifts (Except When Used For Landscaping Work), Soil Stabilazer (Seaman Tiller, Bo Mag, Rago Gator and Similar Types or Equipment), Tube Float, Spray Machine, Curing Machine, Concrete or Asphalt Milling Machine, Snooper Truck Operator.

GROUP 2: Concrete Mixers Without Skips, Rock Crusher, Ditching Machine Under 6', Curbing Machine, one Drum Machines without Tower or Boom, Air Tugger, Self-Propelled Concrete Saw, Machine- Mounted Post Hole Digger, Two to Four Generators, Water Pumps, or Welding Machines, within 400 ft, Air Compressor 600 cu. ft. and Under, Rollers on Aggregate and Seal Coat Surfaces, Fork Lifts (When Used For Landscaping Work, Concrete and Blacktop Curb Machine, Farm Tractor with less than Half Yard Bucket, One Water Pump, Oilers, Air Valves or Steam Valves, One Welding Machine, Truck Jack, Mud Jack, Gunnite Machine, House Elevators when used for Hoisting Material, Engine Tenders, Wagon Drill, Flex Plane, Conveyor, Siphons and Pulsometer, Switchman, Fireman on Paint Pots, Fireman on Asphalt Plants, Distributor Operators on Trucks, Tampers, Self- Propelled Power Broom, Striping Machine (Motor Driven), Form Tamper, Bulk Cement Plant Equipment Greaser, Deck Hands, Truck Crane Oiler_Driver, Cement Blimps, Form Grader, Temporary Heat, Throttle Valve, Farm Tractor, Super Sucker (and Similar Type of Equipment).

IRON0022-009 06/01/2019

CLAY, CRAWFORD, EFFINGHAM COUNTY (Remainder), JASPER, LAWRENCE, and RICHLAND COUNTIES

IRONWORKER.......................$ 32.54 22.90

IRON0046-007 08/01/2019

EFFINGHAM (Excluding Dexter & East thereof) AND FAYETTE (Avenue & North thereof) COUNTIES

IRONWORKER.......................$ 33.64 27.66

IRON0103-005 08/01/2018

CLAY (Louisville & South thereof), EDWARDS, FRANKLIN (Northeast corner), GALLATIN, HAMILTON, JEFFERSON (East of Mt. Vernon), LAWRENCE (Southern Half including Lawrenceville), MARION (Southeast), RICHLAND (Southern Half), SALINE (Northeastern 1/3), WABASH, WAYNE, and WHITE COUNTIES

IRONWORKER.......................$ 28.66 22.435

IRON0392-002 08/01/2018

FAYETTE (Southern Half below Brownstown), JACKSON (Remainder), JEFFERSON (Mount Vernon & area West thereof), MARION, PERRY, and RANDOLPH COUNTIES

IRONWORKER.......................$ 32.50 27.38

IRON0782-005 05/01/2018

ALEXANDER, FRANKLIN, GALLATIN, HARDIN, JACKSON (Except Ava and Elkville TWPS), JOHNSON, MASSAC, PERRY, POPE, PULASKI, SALINE (Except vicinity of El Dorado and area Northeast thereof), UNION, and WILLIAMSON COUNTIES

IRONWORKER.......................$ 31.66 24.30

LABO0459-002 08/01/2017

RANDOLPH COUNTY

LABORERS

Group 1.....................$ 28.63 24.61 Group 2.....................$ 29.13 24.61 Group 3.....................$ 30.13 24.61

LABORER CLASSIFICATIONS:

GROUP 1 - General Laborer

GROUP 2 - Asbestos Abatement Worker and Hazardous Waste Worker; Lead Base Paint Worker

GROUP 3 - Dynamite Man

LABO0773-002 04/01/2019

ALEXANDER, FRANKLIN, GALLATIN, HARDIN, JACKSON, JOHNSON,

MASSAC, PERRY, POPE, PULASKI, SALINE, UNION, AND WILLIAMSON

LABORER..........................$ 27.50 24.27

LABO1197-001 04/01/2019

CLAY, CRAWFORD, EDWARDS, EFFINGHAM, FAYETTE, HAMILTON, JASPER,

JEFFERSON, LAWRENCE, MARION, RICHLAND, WABASH, WAYNE, AND WHITE

LABORER..........................$ 27.50 24.27

PAIN0032-006 05/01/2017

ALEXANDER, FRANKLIN, GALLATIN, HARDIN, JACKSON, JOHNSON, PERRY,

POPE, PULASKI, RANDOLPH, SALINE, UNION, and WILLIAMSON COUNTIES

PAINTER

Bridges, Dams...............$ 33.56 16.23 Journeyman..................$ 31.26 16.23

Epoxy or Toxic-Lead-Based Paint Work-$1.00 Premimum

PAIN0058-006 05/01/2017

FAYETTE COUNTY

PAINTER (Bridge).................$ 32.45 17.12

Epoxy or Toxic-Lead-Based Paint Work-$1.00 Premimum

PAIN0124-002 05/01/2017

CLAY, HAMILTON, JEFFERSON, MARION, and WAYNE COUNTIES

Rates Fringes

PAINTER

Journeyman..................$ 25.00 16.01 Taping (All Kinds)..........$ 25.80 16.01

Epoxy or Toxic-Lead-Based Paint Work-$1.00 Premimum

Journeyman work on Bridges, Grain Elevators, Water, Radio & Television Towers, Stacks, Waste Water Plants, and Water Treatment Plants - $3.10 Premium

PAIN0156-008 04/01/2019

EDWARDS, WABASH, AND WHITE COUNTIES

Rates Fringes

PAINTER

Brush & Roller of Mastics, Creosote, Kwinch Koate, and Coal Tar Epoxy..........$ 28.60 16.43+A Brush, Roller and Paperhanger.................$ 27.60 16.43+A Drywall Finishers and Plasterers..................$ 27.85 16.43+A Spray of Mastics, Creosotes, Kwinch Koate, and Coal Tar Epoxy..........$ 29.60 16.43+A Spray, Sandblast, Power Tools, Waterblast, and Steam Cleaning..............$ 28.60 16.43+A

FOOTNOTE A:

All Structures over 40? S0.75/ hour above base wage All Structures over 75? 51.501 hour above base wage All Structures over 100? 52.50/ hour above base wage

PAIN0500-004 06/01/2019

MASSAC COUNTY

PAINTER

Bridges & Dams - Blast & Spray.......................$ 28.75 14.35 Bridges & Dams - Brush & Roll........................$ 27.75 14.35 Industrial - Blast & Spray..$ 24.00 14.35 Industrial - Brush & Roll...$ 23.00 14.35

Spray, Sandblasting and water blast units with 3500 PSI receive a $.50 per hour premimum.

All work forty feet and above receive a $1.00 per hour premimum.

PAIN1705-003 05/01/2017

CRAWFORD, EFFINGHAM, JASPER, LAWRENCE, and RICHLAND COUNTIES

Rates Fringes

PAINTER

Blasting, Spraying & Pressure Washing............$ 28.30 20.07 Brush & Roller and Wall Covering Drywall Preparing..$ 27.30 20.07

Epoxy or Toxic-Lead-Based Paint Work-$1.00 Premimum

Brush & Roller work over 30' above ground or floor level - $0.80 Premium

Brush & Roller work over 100' above ground or floor level - $1.80 Premium

Blasting, Spraying & Pressure work over 30' above ground level - $2.30 Premium

Blasting, Spraying & Pressure work over 100' above ground level - $3.30 Premium

PLAS0143-010 04/01/2017

ALEXANDER, FRANKLIN, GALLATIN, HARDIN, JACKSON, JOHNSON,

MASSAC, PERRY, POPE, PULASKI, RANDOLPH, SALINE, UNION, AND

WILLIAMSON COUNTIES

CEMENT MASON/CONCRETE FINISHER...$ 29.11 16.09

PLAS0143-011 04/01/2016

CLAY, CRAWFORD, EDWARDS, EFFINGHAM, FAYETTE, HAMILTON, JASPER,

JEFFERSON, LAWRENCE, MARION, RICHLAND, WABASH, WAYNE, and WHITE Counties

CEMENT MASON/CONCRETE FINISHER...$ 29.22 16.31

TEAM0026-006 05/01/2019

EFFINGHAM and JASPER COUNTIES

Rates Fringes

TRUCK DRIVER

Group 1.....................$ 38.06 19.62 Group 2.....................$ 38.61 19.62 Group 3.....................$ 38.87 19.62 Group 4.....................$ 39.23 19.62 Group 5.....................$ 40.27 19.62

CLASSIFICATIONS:

GROUP 1: Drivers on 2 axles hauling less than 9 tons; air compressor & welding machines and brooms, including those pulled by separate units; Truck Driver Helper, warehouse employees; Mechanic Helpers; greasers and tiremen; pick-up trucks when hauling material, tools, or workers to and from and on the job site; and forklifts up to 6,000 lb capacity.

GROUP 2: 2 or 3 axles hualing more than 9 tons but hauling less than 16 tons; A-frame winch trucks; hydrolift trucks;

Vactor Trucks or similar equipment when used for transportation purposes; Forklift over 6,000 lb.capacity;

winch trucks; and four axle combiation units.

GROUP 3: 2, 3 or 4 Axles hauling 16 tons or more; 5-Axles or more combination units; drivers on water pulls; articulated dump trucks; mechanics and working forepersons.

GROUP 4: Low Boy and Oil Distributors.

GROUP 5: Drivers who require special protective clothing while employed on hazardous waste work.

TEAM0050-004 05/01/2019

CLAY, FAYETTE, JEFFERSON, MARION, RANDOLPH, and WAYNE COUNTIES

TRUCK DRIVER

Group 1.....................$ 38.17 19.85 Group 2.....................$ 38.71 19.85 Group 3.....................$ 39.01 19.85 Group 4.....................$ 39.34 19.85 Group 5.....................$ 40.39 19.85

CLASSIFICATIONS:

GROUP 1: Drivers on 2 axles hauling less than 9 tons; air compressor & welding machines and brooms, including those pulled by separate units; Truck Driver Helper, warehouse employees; Mechanic Helpers; greasers and tiremen; pick-up trucks when hauling material, tools, or workers to and from and on the job site; and forklifts up to 6,000 lb capacity.

GROUP 2: 2 or 3 axles hualing more than 9 tons but hauling less than 16 tons; A-frame winch trucks; hydrolift trucks;

Vactor Trucks or similar equipment when used for transportation purposes; Forklift over 6,000 lb.capacity;

winch trucks; and four axle combiation units.

GROUP 3: 2, 3 or 4 Axles hauling 16 tons or more; 5-Axles or more combination units; drivers on water pulls; articulated dump trucks; mechanics and working forepersons.

GROUP 4: Low Boy and Oil Distributors.

GROUP 5: Drivers who require special protective clothing while employed on hazardous waste work.

TEAM0135-009 05/01/2019

CRAWFORD, EDWARDS, LAWRENCE, RICHLAND, and WABASH COUNTIES

Rates Fringes

TRUCK DRIVER

Group 1.....................$ 34.30 12.00+A Group 2.....................$ 34.70 12.00+A Group 3.....................$ 34.80 12.00+A Group 4.....................$ 35.15 12.00+A Group 5.....................$ 35.90 12.00+A

FOOTNOTE: A. $36.20 per day

CLASSIFICATIONS:

Group 1 - Drivers on 2 axle truckshauling less than 9 ton;

Air compressor and welding machines and brooms, including those pulled by separate units; Truck Driver Helpers;

Warehouse employees; Mechanic helpers; Greasers and tiremen; fork lifts up to 6,000 pounds capacity

Group 2 - 2 or 3 axle trucks hauling more than 9 ton but hauling less than 16 ton; A-frame winch trucks; Hydrolift trucks; Vactor trucks or similar equipment when used for transportation purposes; Fork lifts over 6,000 pound capacity; Winch trucks; 4 axle combination units; In the event the Employer desires to use ticket writers that classification shall come under Group II

Group 3 - 2, 3, or 4 axle trucks hauling 16 ton or more;

Drivers on water pulls; Articulated Dump Trucks; Mechanics and working forepersons; 5 axle or more combination units

Group 4 - Low Boy; Oil Distributors

Group 5 - Drivers who require special protective clothing while employed on hazardous waste work.

TEAM0347-001 05/01/2019

GALLATIN COUNTY

Rates Fringes

TRUCK DRIVER

Group 1.....................$ 36.45 21.35 Group 2.....................$ 37.00 21.35 Group 3.....................$ 37.27 21.35 Group 4.....................$ 37.63 21.35 Group 5.....................$ 38.65 21.35

CLASSIFICATIONS:

GROUP 1: Drivers on 2 axles hauling less than 9 tons; air compressor & welding machines and brooms, including those pulled by separate units; Truck Driver Helper, warehouse employees; Mechanic Helpers; greasers and tiremen; pick-up trucks when hauling material, tools, or workers to and from and on the job site; and forklifts up to 6,000 lb capacity.

GROUP 2: 2 or 3 axles hualing more than 9 tons but hauling less than 16 tons; A-frame winch trucks; hydrolift trucks;

Vactor Trucks or similar equipment when used for transportation purposes; Forklift over 6,000 lb.capacity;

winch trucks; and four axle combiation units.

GROUP 3: 2, 3 or 4 Axles hauling 16 tons or more; 5-Axles or more combination units; drivers on water pulls; articulated dump trucks; mechanics and working forepersons.

GROUP 4: Low Boy and Oil Distributors.

GROUP 5: Drivers who require special protective clothing while employed on hazardous waste work.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be…