Salient_Characteristics_AV_System_Room_117_and_224.pdf

The 118th Intelligence Squadron requires a multimedia distribution system that is designed to support military command and control environments and where the core distribution has been Common Criteria

EAL-4 approved. The Salient characteristics of the sub systems are provided below:

Multi-Media Transmitter / Receiver:

Video Connector supports both HDMI 1.4 and DisplayPort 1.2 cables 10Gbps bandwidth per port SFP Module based with options for; Multi-mode fiber, single mode fiber and CATx configurations Extension of up to 80km over fiber, 100m over CAT6a Support for a single display up to 4096x2160 @ 30Hz uncompressed– over a single fiber or CATx cable Support for a single display up to 4096x2160 @ 60Hz uncompressed – over two fibers or CATx cables Supports HDCP content Local output port(s) Ethernet port for configuration, management and updates Support for embedded audio, with ability to de-embed at the receiver Support for unbalanced analog audio and serial RS-232 Support for Network 10/100/1000 Modular, hot-swappable form factor for field configuration Surface mountable via optional mounts Compatible with core switch that has a current common criteria EAL4 certification

Multimedia Switch Core

Multi-mode fiber, single mode fiber, CATx and hybrid configurations Non-blocking and protocol agnostic Scalable switch core from 16 to 48 ports 10Gbps bandwidth per port Access sources up to 80 kilometers away, with no performance degradation Partitioned and restricted switching Hot-swap all critical system components to maximize system uptime Redundant power supplies and control cards with automatic failover.

Enhanced diagnostics and alarms provide extensive real-time monitoring and diagnostics of critical functions of the switch Current common criteria EAL4 certification

Control Processor

Control Engine

Real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system;

supports up to 10 simultaneously running programs. Processor GUI must be accessible and useable from any PC.

Communications Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS

140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client

Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode

Cresnet: Appliance must support Cresnet master mode

USB: Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port

RS-232/422/485: For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485

IR/Serial: Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to

115.2k baud

Connectors & Card Slots

(3) 3-Series control card expansion slots

(2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232/422/485 ports [3];Up to 115.2k baud;

hardware and software handshaking support

(4) 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports [3]; Up to 115.2k baud software handshaking support

(2) 8-pin 3.5 mm detachable terminal blocks;

(8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

(2) 8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts

(1) 8-pin RJ45 jack;

(1) USB Type A female; USB 2.0 port for storage devices

(1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion

(1) 9-pin 3.5 mm detachable terminal block; comprises(8) "Versiport" digital input/output or analog input ports

(1) Cresnet master port, outputs power to Cresnet devices

Touch Screen:

The touch screen required will be the central operating interface for using and controlling the multimedia system and requires the following Salient Characteristics:

Display Type TFT active matrix color LCD

Size 10.1 inch (257 mm) diagonal

Aspect Ratio 16:10 WXGA

Resolution 1280 x 800 pixels

Brightness 400 nits (cd/m²)

Contrast 950:1

Color Depth 24-bit, 16.7M colors

Illumination Edgelit LED w/auto-brightness control

Viewing Angle ±80° horizontal, ±80° vertical

Touch Screen Projected capacitive, 5-point multi-touch capable

Camera: None

Microphone: None

Bluetooth: None

Power: Local or POE

Mounting: Table top

Audio System:

The audio system will be comprised of a multi-channel amplifier, Volume controller, ceiling mounted speakers. For system continuity, end user supportability, and training the audio system components shall be manufactured by a common manufacturer with the following required features:

Audio Amplifier

Input Signal Type: Balanced or unbalanced analog line-level

Output Signal Types: 4/8 Ohm, 70 Volt, or 100 Volt

Output Power: 120 Watts at 8 Ohms; 210 Watts at 4 Ohms; 420 Watts at 8 Ohms bridged; 120 Watts at 70 or 100 Volts (Transformer isolated)

Damping Factor >100

Protection: Over Current, Over/Under Voltage, Over Temperature, DC Offset

Frequency Response: 20Hz to 20kHz ±0.5 dB at 4/8 Ohms; 80Hz to 20kHz +0/-3 dB at 70/100 Volts

THD 0.05% @ 1kHz, full rated power at 4/8 Ohms, 8 Ohms Bridged, or 70/100 Volts;

0.1% @ 20Hz to 20kHz, 120W at 8 Ohms;

0.2% @ 20Hz to 20kHz, 210W at 4 Ohms;

0.1% @ 20Hz to 20kHz, 420W at 8 Ohms Bridged;

0.1% @ 80Hz to 20kHz, 120W at 70/100 Volts

S/N Ratio: >103 dB, A-weighted

Crosstalk: >70 dB @ 1kHz

Gain: 23 dB with INPUT LEVEL control set at 12 o'clock nominal position

Input Sensitivity: 2.22 Vrms for rated output power with INPUT LEVEL control set at 12 o'clock nominal position

Input Detection Threshold: 40 mV RMS @ 1 kHz

Input Level Adjustment: ±10 dB from nominal

Size: 1 Rack Unit, Rack Mountable

Audio Volume Controller

Features: 4x4 Matrix Mixer, 4-Channel Digital Audio Processor

Master Volume: -80dB to +20dB, 0.1dB steps (balanced I/O)

Channel Volume: -80dB to +12dB, 0.1dB steps from Media Tools; -80dB to +0dB, 0.1dB steps from SIMPL (balanced I/O)

Mute: > -100dB

Bass/Treble Gain Range: ±15dB, 0.5dB steps

Equalization Modes: 10-band graphic plus 2-band parametric; 5-band graphic plus 7-band parametric; speech-optimized 5-band graphic plus 7-band parametric; 3-band graphic plus 9-band parametric; or 12-band parametric

PEQ Filter Gain: ±12dB, 0.1dB steps from Media Tools; +24/-36dB, 0.1dB steps from SIMPL

PEQ Filter Bandwidth: 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from Media Tools; 0.02 to 3.5 from SIMPL

PEQ Filter Center Frequency: 25Hz to 19.9kHz from Media Tools; 5Hz to 24KHz from SIMPL

PEQ Filter Types: low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf

GEQ Filter Gain: +5/-10dB, 0.1dB steps from Media Tools; ±10dB, 0.1dB steps from SIMPL

GEQ Filter Center Frequencies: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz (10-band); 63, 250, 1k, 4k, 10k Hz (5-band); 160, 600, 1k, 2.5k, 5k Hz (Speech Opt. 5-band); 250, 1k, 4k Hz (3-band)

Frequency Response: ±0.1dB 20Hz to 22kHz, ±0.5dB 10Hz to 30kHz

Total Harmonic Distortion (THD) + Noise: <0.008% @1kHz

S/N Ratio: >97dB balanced, >95dB unbalanced, 20Hz to 22kHz A-weighted

Crosstalk: > -90dB 20Hz to 22kHz

Common Mode Rejection: >90dB 20Hz to 22kHz

Control: Must support Cresnet

Size: ½ Rack Unit, Rack Mountable

Speakers:

Woofer: 6.5 inch (165 mm) cone, ported

Tweeter: 0.79 inch (20 mm) dome

Impedance: 8 Ohms nominal with transformer set to "8Ω"

Transformer Taps: 3.75W/7.5W/15W/30W at 70V; 7.5W/15W/30W at 100V

Frequency Response: 95 Hz to 15 kHz (±3 dB)

Frequency Range: 65 Hz to 20 kHz (-10 dB)

Power Handling: 50 Watts program (8 Ohms)

Sensitivity: 91 dB @ 1W/1m

Coverage: 110° conical (nominal)

Color: White

Input: (1) 4-pin 5 mm detachable terminal block; Speaker input with parallel pass-through;

Maximum Wire Size: 12 AWG

Transformer Tap: (1) Screwdriver-adjustable rotary switch on baffle; Used to select 70/100V tap or 8 Ohms (bypass)

Audio Receiver:

Video Connector supports both HDMI 1.4 and DisplayPort 1.2 cables 10Gbps bandwidth per port SFP Module based with options for; Multi-mode fiber, single mode fiber and CATx configurations Extension of up to 80km over fiber, 100m over CAT6a Support for a single display up to 4096x2160 @ 30Hz uncompressed– over a single fiber or CATx cable Support for a single display up to 4096x2160 @ 60Hz uncompressed – over two fibers or CATx cables Supports HDCP content Local output port(s) Ethernet port for configuration, management and updates Support for embedded audio, with ability to de-embed at the receiver Support for unbalanced analog audio and serial RS-232 Support for Network 10/100/1000 Modular, hot-swappable form factor for field configuration

Surface mountable via optional mounts Compatible with core switch that has a current common criteria EAL4 certification

Power Distribution The government will provide an existing equipment rack for mounting rack mountable gear. Though power distribution will be required with the following characteristics.

Cable Type: Corded finish: Black Powder Coat

UL Standards Tested: 1419, 60950-1 & 60065

Termination: 5-20P

Surge Protected: Basic

Mounting Points: 2

RoHS: Yes

Greenguard: Yes

Dimensions

Depth U S: 9.625

Height U S: 1.75

Width U S: 19

Primary Package Weight U S: 8.8

Rack Units: 1

Cord Length U S: 9’

Amps: 20

Material: Steel

Mounting: Horizontal

Volts: 120

Number Of Circuits: 1

Number Of Outlets: 9

Rear distribution outlets with one front convenience outlet

Includes surge and spike protection, as well as EMI filtering

Over the Floor Raceway An ADA compliant permanent Over the Floor Raceway must be provided and installed to route cables between walls and furniture consoles. The OFR will have the following characteristics:

Be modular in nature with multiple adapters and fittings

Be constructed of steel and or aluminum with black powder coat finish provides four-channels of capacity and access tamper-resistant

Installation and Integration

Installation must be performed by an InfoComm Apex level certified company

Company must be within 25 miles of place of performance

Company must have certified Platinum Crestron Programmers

Company must have Top Secret Cleared installation and project management

Company must be authorized resellers of Crestron and Thinklogical with proven past performance of installations using both products