Fence_Design_PD_2018-08-21_2.doc

DOC document 617 KB Posted Aug 29, 2018

Attached to: FP STANDARDS - GATES AND FENCE
Solicitation number: W912GY18R0031
Issued by: Department of the Army Materiel Command Contracting Command Detroit Arsenal

About this file

From the source

Fence Design

View the file

Other files

File	Type	Posted
Site_Visit_Sign_In_Sheet.pdf	PDF	Sep 27, 2018
Questions_and_Answers_Set_3.docx	DOCX document	Sep 24, 2018
Questions_and_Answers_Set_2.docx	DOCX document	Sep 20, 2018
Questions_and_Answers_Set_1.docx	DOCX document	Sep 5, 2018
Visitor_Request_form1246R_Mar-2017.pdf	PDF	Aug 29, 2018
Gate_Opener_PD_2018-08-21_3.doc	DOC document	Aug 29, 2018
Gate_Detail_PD_2018-08-21_4.doc	DOC document	Aug 29, 2018
Site_Plan_2018-08-21_1.doc	DOC document	Aug 29, 2018
W912GY18R0031-FP_GATES.pdf	PDF	Aug 29, 2018

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

BARBED-WIRE APRON ON EXTENSION ARMS

TIE WIRES OR HOG RINGS (TYP.)

1'-0"

X X X

X X X X X

X X X X X X

X X X

X X X X X

X X X

X X X X X X

9-GAGE STEEL TIE WIRES (2'-0"

X X

X X X X

X X X

X X X X

X X

X X X

X X

O.C. MAX.)

X X X X X X X X X X X X X X X X X

X X X X X

X X X X X X X

X X X X

X	X	X
LOCK PIN (TYP.)	BARBED WIRE (TYP.)

TOP RAIL OR TENSION WIRE

LINE POST

CHAIN-LINK FABRIC (9 GAGE, 2" MESH)

45 DEGREES

35 DEGREES

FABRIC

CORNER, END, OR PULL POST

16" MIN. DIA.

BRACE RAIL

TIE WIRES OR CLIPS (TYP.)

TRUSS ROD (3/8" MIN.

2" DIA.)

3'-4" MIN.

CONCRETE BASE

6" 6"

BOTTOM OF FABRIC

1 1/2" MIN

2 1/2" MAX

TENSION WIRE

GRADE

10" MIN. DIA.

HOG RINGS (TYP.)

3/8" PLAIN PIN RIVETED FLUSH (TYP.)

EXTENSION ARM DETAILS

STEEL POST SCHEDULE

USE AND SECTION

MINIMUM

OUTSIDE DIMENSIONS

(NOMINAL)

FABRIC WIDTH 72" OR LESS

FABRIC WIDTH 84" TO 96"

FABRIC WIDTH

108"

AND

OVER

CORNER, END & PULL POSTS TUBULAR - ROUND TUBULAR - SQUARE

C-SECTION (ROLL-FORMED)

2.375" O.D.

2.00" SQ.

3.50" X 3.50"

2.875" O.D.

2.50" SQ.

3.50" X 3.50"

4.00" O.D.

3.00" SQ.

LINE POSTS

TUBULAR - ROUND H-SECTION

C-SECTION (ROLL-FORMED)

1.90" O.D.

2.25" X 1.70" 1.875" X 1.625" 2.375" O.D.

2.25" X 1.70" 2.25" X 1.70" 2.875" O.D. 2.25" X 1.70"

TOP, BOTTOM & BRACE RAILS

TUBULAR - ROUND

1.66" O.D.

TUBULAR - SQUARE

1.50" SQ.

H-SECTION

1.625" X 1.50"

C-SECTION (ROLL-FORMED)

1.625" X 1.25"

NO SCALE

CORNER POST

FABRIC WIDTH

3/8" PLAIN PIN RIVETED FLUSH (TYP.)

TOP OR BRACE RAIL ATTACHMENT

10'-0" MAXIMUM

10'-0" O.C. MAXIMUM

LINE POSTS TO BE EQUALLY SPACED

CHAIN-LINK SECURITY FENCE DETAIL

9-GAGE STEEL TIE WIRE (15" O.C. MAX. AND WITHIN 4" FROM TOP AND BOTTOM OF FABRIC)

H-BEAM ROUND POST

LINE POST ATTACHMENTS

GAGE STEEL TIE WIRE (15" O.C. MAX. AND WITHIN 4" FROM TOP AND BOTTOM OF FABRIC)

TENSION BAND (15" O.C. MAX. AND WITHIN 4" FROM TOP AND BOTTOM OF FABRIC)

FABRIC

TOP RAIL OR TENSION WIRE

X X X X X X X X X X X X X X X X X X X

FENCE POST

#8 AWG SOLID COPPER WIRE

MOLDED EXOTHERMIC WELD OR APPROVED CLAMP-TYPE

TRUSS ROD (3/8" MIN. DIA.)

TENSION BAND

TENSION BAR TO ENGAGE EACH FABRIC LINK

TENSION BAR

CARRIAGE BOLT

NOTES:

DETAILS SHOWN ARE TO CLARIFY REQUIREMENTS AND ARE NOT INTENDED TO LIMIT OTHER TYPES OF FENCE SECTIONS AND METHODS OF INSTALLATION THAT COMPLY WITH THE SPECIFICATIONS.

WIRE TIES, RAILS, POSTS, AND BRACES SHALL BE CONSTRUCTED ON THE SECURE SIDE OF THE FENCE ALIGNMENT. CHAIN-LINK FABRIC SHALL BE PLACED ON THE SIDE OPPOSITE THE

10'-0"

LINE POST BRACE RAILS

PULL POST

TRUSS ROD TRUSS ROD

10'-0" MAX. 10'-0" MAX.

BRACE RAILS

TENSION WIRE

3/4" DIA. COPPER-CLAD STEEL GROUND ROD

FITTING OF COPPER

CONCRETE BASE

TRUSS ROD AND BAND

1 1/2" (TYP.)

TRUSS ROD (3/8" MIN. DIA.)

ROUND POST

H-BEAM

BRACE RAIL CLAMP DETAILS

END OR GATE POST DETAIL

TENSION BAND DETAIL

BARBED WIRE OR TENSION WIRE

SECURE AREA.

UNLESS SPECIFICALLY SHOWN OR SPECIFIED, ALL FE6 FENCE SHALL HAVE AN APRON EXTENDED OUTWARD FROM THE AREA BEING PROTECTED.

C-SECTION POSTS SHALL BE INSTALLED SO THAT THE VOID INSIDE THE POST IS COMPLETELY FILLED WITH CONCRETE UP TO THE TOP OF THE FOUNDATION.

FENCE LEGEND:

TYPE FE5 - CHAIN-LINK FENCE WITHOUT BARBED-WIRE APRON

TYPE FE6 - CHAIN-LINK FENCE W/BARBED-WIRE ON SINGLE OUTRIGGER TYPE FE7 - CHAIN-LINK FENCE W/BARBED WIRE ON DOUBLE OUTRIGGER TYPE FE8 - CHAIN-LINK FENCE W/BARBED-WIRE AND BARBED-TAPE ON DOUBLE OUTRIGGER TR - FENCE WITH TOP RAIL AND TENSION WIRE AT BOTTOM

TBR - FENCE WITH TOP AND BOTTOM RAILS

BRACE PANEL DETAIL

NO SCALE

NOTE:

PROVIDE BRACE PANEL WHENEVER STRAIGHT RUNS EXCEED 500 FEET.

GROUNDING DETAIL

NO SCALE

FASTENING DETAILS

NO SCALE

TWB - TENSION WIRE TOP AND BOTTOM

TWBR - FENCE WITH TOP TENSION WIRE AND BOTTOM RAIL FINAL NUMBER IS FABRIC WIDTH IN INCHES.

EXAMPLES

FE6-TR-72 - CHAIN-LINK SECURITY FENCE WITH BARBED-WIRE ON SINGLE OUTRIGGER, TOP RAIL, AND 72 INCH FABRIC WIDTH.

FE5-TWB-84 - CHAIN-LINK SECURITY FENCE WITH NO APRON, TOP AND BOTTOM TENSION WIRE, AND 84 INCH FABRIC WIDTH.

Distribution Statement A: Approved for FE6 Fence Detail Gate Renovation Project #100-17-04652 A25 @ Chewing Gum Rd.

public release: distribution unlimited.

Herlong Sierra Army Depot California file_0.png

Scale: Date: Drawn By: Sheet: NTS 08/21/2018 TLW 2 Of 4 Plotted Date:

File details come from the government source that posted it.