Conveyor_Specifications.pdf
PDF 74 KB Posted
- Attached to
- Furnish and Install Baler
- Solicitation number
- W912GY16B0003
About this file
Conveyor Specifications
View the file
Other files
| File | Type | Posted |
|---|---|---|
| OF1419.xls | XLS spreadsheet | |
| Questions_and_Answers_Baler_Set_7.dot | DOT file | |
| Question_and_Answer_Baler_Set_6.doc | DOC document | |
| Questions_and_Answers_Baler_Set_5.doc | DOC document | |
| Questions_ _Answers_Set_4.doc | DOC document | |
| Questions_and_Answers_Baler_Set_3.doc | DOC document | |
| IMG_8792.JPG | JPG image | |
| IMG_8793.JPG | JPG image | |
| IMG_8791.JPG | JPG image | |
| Questions_and_Answers_Set_2_Baler.doc | DOC document | |
| Interested_Vendors_List.pdf | ||
| SF30_amendment_0001_ver_2.pdf | ||
| Baler_Questions_and_Answers_Set_1.doc | DOC document | |
| W912GY-16-B-0003.pdf | ||
| Baler_Plan.pdf |
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Bailer Conveyor Specifications
1. Conveyor shall run from collection pit to bailer hopper.
2. It shall be supplied by the same manufacturer as the bailer to insure compatibility. The fabrication shall be of the same quality, durability, color and life cycle as the bailer.
3. It shall have seal bearings on any components exposed to dirt and water.
4. It shall have a 5 ft. wide medium to heavy weight oil resistant rubber belt. With 3in. high cleats on 30in. centers.
5. Motor and gear reduction shall be high efficient units compatible with bailer voltage.
6. Conveyor frame shall have sides that extend above the belt approx. 20in. from back of pit to hopper to keep waste on the belt.
7. Conveyor frame shall have heavy weight sloped angled sides that extend above the belt to top of pit to create a funnel effect into the receiving pit. They shall be design for easy removal and/or replacement.
8. It shall have full belt flashing with an under belt self‐cleaning system.
9. It shall have emergency shut off and remote start/stop/variable speed controls.
10. All controls and electrical components shall be UL approved rain tight and made in America.
File details come from the government source that posted it. Updated .