A.01.30_Technical_Specifications_(Amendment_00004).pdf

Lucky Peak Outlet Slide Gate Hydraulic Cylinder Rehab W912EF18Q0023 Amend-0004

SECTION TABLE OF CONTENTS

DIVISION 01 - GENERAL REQUIREMENTS

SECTION 01 22 00.00 28

MEASUREMENT AND PAYMENT

PART 1 GENERAL

1.1 RETAINAGE OF PAYMENT

1.2 CLIN 0001 CYLINDER REMOVAL AND REINSTALLATION

1.3 CLIN 0001AA CYLINDER REMOVAL AND REINSTALLATION

1.4 CLIN 0001AB CYLINDER REMOVAL AND REINSTALLATION

1.5 CLIN 0002 RECONDITIONING HYDRAULIC CYLINDERS

1.6 CLIN 0002AA RECONDITIONING HYDRAULIC CYLINDERS

1.7 CLIN 0002AB RECONDITIONING HYDRAULIC CYLINDERS

1.8 CLIN 0003 BONNET COVER GLANDS

1.9 CLIN 0004 PISTON RINGS

1.10 CLIN 0005 CYLINDER DEFECT REPAIR

1.11 CLIN 0006 BONNET COVER REPAIR

1.12 CLIN 1001 CYLINDER REMOVAL AND REINSTALLATION

1.13 CLIN 1001AA CYLINDER REMOVAL AND REINSTALLATION

1.14 CLIN 1001AB CYLINDER REMOVAL AND REINSTALLATION

1.15 CLIN 1002 RECONDITIONING HYDRAULIC CYLINDERS

1.16 CLIN 1002AA RECONDITIONING HYDRAULIC CYLINDERS

1.17 CLIN 1002AB RECONDITIONING HYDRAULIC CYLINDERS

1.18 CLIN 1003 BONNET COVER GLANDS

1.19 CLIN 1004 PISTON RINGS

1.20 CLIN 1005 CYLINDER DEFECT REPAIR

1.21 CLIN 1006 BONNET COVER REPAIR

1.22 CLIN 2001 CYLINDER REMOVAL AND REINSTALLATION

1.23 CLIN 2001AA CYLINDER REMOVAL AND REINSTALLATION

1.24 CLIN 2001AB CYLINDER REMOVAL AND REINSTALLATION

1.25 CLIN 2002 RECONDITIONING HYDRAULIC CYLINDERS

1.26 CLIN 2002AA RECONDITIONING HYDRAULIC CYLINDERS

1.27 CLIN 2002AB RECONDITIONING HYDRAULIC CYLINDERS

1.28 CLIN 2003 BONNET COVER GLANDS

1.29 CLIN 2004 PISTON RINGS

1.30 CLIN 2005 CYLINDER DEFECT REPAIR

1.31 CLIN 2006 BONNET COVER REPAIR

1.32 CLIN 3001 CYLINDER REMOVAL AND REINSTALLATION

1.33 CLIN 3001AA CYLINDER REMOVAL AND REINSTALLATION

1.34 CLIN 3001AB CYLINDER REMOVAL AND REINSTALLATION

1.35 CLIN 3002 RECONDITIONING HYDRAULIC CYLINDERS

1.36 CLIN 3002AA RECONDITIONING HYDRAULIC CYLINDERS

1.37 CLIN 3002AB RECONDITIONING HYDRAULIC CYLINDERS

1.38 CLIN 3003 BONNET COVER GLANDS

1.39 CLIN 3004 PISTON RINGS

1.40 CLIN 3005 CYLINDER DEFECT REPAIR

1.41 CLIN 3006 BONNET COVER REPAIR

PART 2 PRODUCTS (Not Applicable)

SECTION 01 22 00.00 28

PART 3 EXECUTION (Not Applicable)

-- End of Section Table of Contents --

SECTION 01 22 00.00 28

MEASUREMENT AND PAYMENT

PART 1 GENERAL

In each instance, the contract price for an item shall constitute full compensation for furnishing all plant, labor, equipment, and materials, and for performing all operations required to complete the work included in the item as herein specified, or as otherwise approved.

1.1 RETAINAGE OF PAYMENT

Retainage in the amount of 10 percent of original contract award amount will be withheld until the final submittals, listed below, have been approved by the Government. The 10 percent retainage for final submittals will be held until such time as the Contractor has earned 90 percent of the original contract value. See SECTION 01 78 00.00 28 "CLOSEOUT SUBMITTALS".

a. Final Operation and Maintenance Manuals and Parts Catalogs.

b. Final Approved Versions of Contractor Prepared Drawings.

c. As-built contract drawings and FIO drawings.

d. Return of Government Issued Items.

1.2 CLIN 0001 CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as the number of times (EA) for the cylinder removal and reinstallation. Payment will be made at the unit price for CLIN No. 0001, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.3 CLIN 0001AA CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 0001AA, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.4 CLIN 0001AB CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 0001AB, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.5 CLIN 0002 RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as the number of times for (EA) reconditioning of the hydraulic cylinders.

Payment will be made at the unit price for CLIN No. 0002, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.6 CLIN 0002AA RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

0002AA, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.7 CLIN 0002AB RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

0002AB, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.8 CLIN 0003 BONNET COVER GLANDS

Bonnet cover glands will be measured for payment for (EA) of the bonnet cover glands. Payment will be made at the unit price for CLIN No. 0003, "BONNET COVER GLANDS," which price and payment shall be full compensation for all work required for the bonnet cover glands, complete, as specified and approved.

1.9 CLIN 0004 PISTON RINGS

Piston rings will be measured for payment for (EA) of the piston rings.

Payment will be made at the unit price for CLIN No. 0004, "PISTON RINGS," which price and payment shall be full compensation for all work required for the piston rings , complete, as specified and approved.

1.10 CLIN 0005 CYLINDER DEFECT REPAIR

"Cylinder Defect Repair" will be measured for payment as the number of square inches (SI) of Cylinder Defect Repair. Payment will be made at the unit price for CLIN No. 0005, "Cylinder Defect Repair", which price and payment shall be full compensation for all work required for Cylinder Defect Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph CYLINDER INTERIOR DEFECT REPAIR for additional information.

1.11 CLIN 0006 BONNET COVER REPAIR

"Bonnet Cover Repair" will be measured for payment as the number of square inches (SI) of Bonnet Cover Repair. Payment will be made at the unit price for CLIN No. 0006, "Bonnet Cover Repair", which price and payment shall be full compensation for all work required for Bonnet Cover Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph BONNET COVER REPAIR for additional information.

1.12 CLIN 1001 CYLINDER REMOVAL AND REINSTALLATION

1.13 CLIN 1001AA CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 1001AA, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.14 CLIN 1001AB CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 1001AB, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.15 CLIN 1002 RECONDITIONING HYDRAULIC CYLINDERS

1.16 CLIN 1002AA RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

1002AA, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.17 CLIN 1002AB RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

1002AB, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.18 CLIN 1003 BONNET COVER GLANDS

Bonnet cover glands will be measured for payment for (EA) of the bonnet cover glands. Payment will be made at the unit price for CLIN No. 1003, "BONNET COVER GLANDS," which price and payment shall be full compensation for all work required for the bonnet cover glands, complete, as specified and approved.

1.19 CLIN 1004 PISTON RINGS

Piston rings will be measured for payment for (EA) of the piston rings.

Payment will be made at the unit price for CLIN No. 1004, "PISTON RINGS," which price and payment shall be full compensation for all work required for the piston rings , complete, as specified and approved.

1.20 CLIN 1005 CYLINDER DEFECT REPAIR

"Cylinder Defect Repair" will be measured for payment as the number of square inches (SI) of Cylinder Defect Repair. Payment will be made at the unit price for CLIN No. 1005, "Cylinder Defect Repair", which price and payment shall be full compensation for all work required for Cylinder Defect Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph CYLINDER

INTERIOR DEFECT REPAIR for additional information.

1.21 CLIN 1006 BONNET COVER REPAIR

"Bonnet Cover Repair" will be measured for payment as the number of square inches (SI) of Bonnet Cover Repair. Payment will be made at the unit price for CLIN No. 1006, "Bonnet Cover Repair", which price and payment shall be full compensation for all work required for Bonnet Cover Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph BONNET COVER REPAIR for additional information.

1.22 CLIN 2001 CYLINDER REMOVAL AND REINSTALLATION

1.23 CLIN 2001AA CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 2001AA, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.24 CLIN 2001AB CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 2001AB, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.25 CLIN 2002 RECONDITIONING HYDRAULIC CYLINDERS

1.26 CLIN 2002AA RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

2002AA, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.27 CLIN 2002AB RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

2002AB, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.28 CLIN 2003 BONNET COVER GLANDS

Bonnet cover glands will be measured for payment for (EA) of the bonnet cover glands. Payment will be made at the unit price for CLIN No. 2003, "BONNET COVER GLANDS," which price and payment shall be full compensation for all work required for the bonnet cover glands, complete, as specified and approved.

1.29 CLIN 2004 PISTON RINGS

Piston rings will be measured for payment for (EA) of the piston rings.

Payment will be made at the unit price for CLIN No. 2004, "PISTON RINGS," which price and payment shall be full compensation for all work required for the piston rings , complete, as specified and approved.

1.30 CLIN 2005 CYLINDER DEFECT REPAIR

"Cylinder Defect Repair" will be measured for payment as the number of square inches (SI) of Cylinder Defect Repair. Payment will be made at the unit price for CLIN No. 2005, "Cylinder Defect Repair", which price and payment shall be full compensation for all work required for Cylinder Defect Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph CYLINDER INTERIOR DEFECT REPAIR for additional information.

1.31 CLIN 2006 BONNET COVER REPAIR

"Bonnet Cover Repair" will be measured for payment as the number of square inches (SI) of Bonnet Cover Repair. Payment will be made at the unit price for CLIN No. 2006, "Bonnet Cover Repair", which price and payment shall be full compensation for all work required for Bonnet Cover Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph BONNET COVER REPAIR for additional information.

1.32 CLIN 3001 CYLINDER REMOVAL AND REINSTALLATION

1.33 CLIN 3001AA CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 3001AA, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.34 CLIN 3001AB CYLINDER REMOVAL AND REINSTALLATION

Cylinder removal and reinstallation will be measured for payment as a complete pay item (JOB). Payment will be made at the lump sum price for CLIN No. 3001AB, "CYLINDER REMOVAL AND REINSTALLATION," which price and payment shall be full compensation for all work required for a cylinder removal and reinstallation, complete, as specified and approved.

1.35 CLIN 3002 RECONDITIONING HYDRAULIC CYLINDERS

1.36 CLIN 3002AA RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

3002AA, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.37 CLIN 3002AB RECONDITIONING HYDRAULIC CYLINDERS

Reconditioning hydraulic cylinders will be measured for payment as complete a pay item (JOB). Payment will be made at the lump sum price for CLIN No.

3002AB, "RECONDITIONING HYDRAULIC CYLINDERS," which price and payment shall be full compensation for all work required to reconditioning a hydraulic cylinder, complete, as specified and approved.

1.38 CLIN 3003 BONNET COVER GLANDS

Bonnet cover glands will be measured for payment for (EA) of the bonnet cover glands. Payment will be made at the unit price for CLIN No. 3003, "BONNET COVER GLANDS," which price and payment shall be full compensation for all work required for the bonnet cover glands, complete, as specified and approved.

1.39 CLIN 3004 PISTON RINGS

Piston rings will be measured for payment for (EA) of the piston rings.

Payment will be made at the unit price for CLIN No. 3004, "PISTON RINGS," which price and payment shall be full compensation for all work required for the piston rings , complete, as specified and approved.

1.40 CLIN 3005 CYLINDER DEFECT REPAIR

"Cylinder Defect Repair" will be measured for payment as the number of square inches (SI) of Cylinder Defect Repair. Payment will be made at the unit price for CLIN No. 3005, "Cylinder Defect Repair", which price and payment shall be full compensation for all work required for Cylinder Defect Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph CYLINDER INTERIOR DEFECT REPAIR for additional information.

1.41 CLIN 3006 BONNET COVER REPAIR

"Bonnet Cover Repair" will be measured for payment as the number of square inches (SI) of Bonnet Cover Repair. Payment will be made at the unit price for CLIN No. 3006, "Bonnet Cover Repair", which price and payment shall be full compensation for all work required for Bonnet Cover Repair, complete, as specified and approved. See SECTION 41 24 27.10 28 RECONDITIONING OF HYDRAULIC CYLINDERS, paragraph BONNET COVER REPAIR for additional information.

PART 2 PRODUCTS (Not Applicable)

PART 3 EXECUTION (Not Applicable)

-- End of Section --