B3_Solicitation_W9126G-16-R-0081.pdf

US Army Corps of Engineers ®

CORPS OF ENGINEERS

FORT WORTH, TEXAS

SPECIFICATIONS FOR

AIR AND MARINE OPERATIONS CENTER

(AMOC) EXPANSION BUILDING 605C

MARCH AIR RESERVE BASE, CA

CUSTOMS AND BORDER PROTECTION

OFFICE OF AIR AND MARINE

SOLICITATION NUMBER : W9126G-16-R-0081

JULY 2016

SEALS PAGE

AIR AND MARINE OPERATIONS CENTER

(AMOC) EXPANSION BUILDING 605C

MARCH AIR RESERVE BASE, CA

CONTRACT NUMBER: W9126G-15-D-0015

SOLICITATION NUMBER: W9126G-16-R-0081

(This page left intentionally blank.)

March ARB AMOC Renovation 605C MARBAMOC

PROJECT TABLE OF CONTENTS

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

00 11 00.01 SOLICITATION, OFFER AND AWARD, SF-1442

00 11 00.02 CLIN SCHEDULE

00 21 00 INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

00 45 00 REPRESENTATIONS AND CERTIFICATIONS

00 72 00 CONTRACT CLAUSES

00 73 00 SPECIAL CONTRACT REQUIREMENTS

00 73 46 WAGE DETERMINATION SCHEDULE

DIVISION 01 - GENERAL REQUIREMENTS

01 00 00.00 44 CONSTRUCTION SCHEDULE

01 32 01.00 10 PROJECT SCHEDULE

01 33 00 SUBMITTAL PROCEDURES

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 42 00 SOURCES FOR REFERENCE PUBLICATIONS

01 45 00.00 10 QUALITY CONTROL

01 45 00.10 10 QUALITY CONTROL SYSTEM (QCS)

01 45 35 SPECIAL INSPECTIONS

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 20.00 10 ENVIRONMENTAL PROTECTION

01 58 00 PROJECT IDENTIFICATION

01 62 35 RECYCLED / RECOVERED MATERIALS

01 74 19 CONSTRUCTION AND DEMOLITION WASTE MANAGEMENT

01 78 00 CLOSEOUT SUBMITTALS

01 78 23 OPERATION AND MAINTENANCE DATA

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION

DIVISION 03 - CONCRETE

03 11 13.00 10 STRUCTURAL CAST-IN-PLACE CONCRETE FORMING

03 15 00.00 10 CONCRETE ACCESSORIES

03 20 00.00 10 CONCRETE REINFORCING

03 30 00.00 10 CAST-IN-PLACE CONCRETE

03 35 00.00 10 CONCRETE FINISHING

03 39 00.00 10 CONCRETE CURING

DIVISION 04 - MASONRY

04 20 00 UNIT MASONRY

DIVISION 05 - METALS

05 05 23.13 10 ULTRASONIC INSPECTION OF WELDMENTS

05 05 23.16 STRUCTURAL WELDING

05 12 00 STRUCTURAL STEEL

05 21 00 STEEL JOIST FRAMING

05 30 00 STEEL DECKS

05 50 13 MISCELLANEOUS METAL FABRICATIONS

05 51 33 METAL LADDERS

DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES

PROJECT TABLE OF CONTENTS Page 1

06 10 00 ROUGH CARPENTRY

06 41 16.00 10 PLASTIC-LAMINATE-CLAD ARCHITECTURAL CABINETS

06 61 16 SOLID SURFACING FABRICATIONS

DIVISION 07 - THERMAL AND MOISTURE PROTECTION

07 05 23 PRESSURE TESTING AN AIR BARRIER SYSTEM FOR AIR TIGHTNESS

07 13 53 ELASTOMERIC SHEET WATERPROOFING

07 21 13 BOARD AND BLOCK INSULATION

07 21 16 MINERAL FIBER BLANKET INSULATION

07 22 00 ROOF AND DECK INSULATION

07 27 10.00 10 BUILDING AIR BARRIER SYSTEM

07 54 19 POLYVINYL-CHLORIDE ROOFING

07 60 00 FLASHING AND SHEET METAL

07 84 00 FIRESTOPPING

07 92 00 JOINT SEALANTS

DIVISION 08 - OPENINGS

08 11 13 STEEL DOORS AND FRAMES

08 33 23 OVERHEAD COILING DOORS

08 34 02 BULLET-RESISTANT COMPONENTS

08 41 13 ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS

08 44 00 CURTAIN WALL AND GLAZED ASSEMBLIES

08 62 00 TUBULAR DAYLIGHTING DEVICE

08 71 00 DOOR HARDWARE

08 81 00 GLAZING

08 91 00 METAL WALL LOUVERS

DIVISION 09 - FINISHES

09 22 00 SUPPORTS FOR PLASTER AND GYPSUM BOARD

09 24 23 CEMENT STUCCO

09 29 00 GYPSUM BOARD

09 30 10 CERAMIC, QUARRY, AND GLASS TILING

09 51 00 ACOUSTICAL CEILINGS

09 62 38 STATIC-CONTROL FLOORING

09 65 00 RESILIENT FLOORING

09 69 13 RIGID GRID ACCESS FLOORING

09 90 00 PAINTS AND COATINGS

DIVISION 10 - SPECIALTIES

10 11 00 VISUAL DISPLAY UNITS

10 14 00.10 EXTERIOR SIGNAGE

10 14 00.20 INTERIOR SIGNAGE

10 14 53 TRAFFIC SIGNAGE

10 21 13 TOILET COMPARTMENTS

10 26 00 WALL AND DOOR PROTECTION

10 26 41 BULLET RESISTANT PANELS

10 28 13 TOILET ACCESSORIES

10 35 00 FLAGPOLES

10 44 16 FIRE EXTINGUISHERS

10 71 13 EXTERIOR SUN CONTROL DEVICES

DIVISION 11 - EQUIPMENT

11 31 13 ELECTRIC KITCHEN EQUIPMENT

11 52 14 TELEVISION SUPPORTS

PROJECT TABLE OF CONTENTS Page 2

11 52 16 PROJECTOR SUPPORTS

DIVISION 12 - FURNISHINGS

12 24 13 ROLLER WINDOW SHADES

12 48 13 ENTRANCE FLOOR MATS AND FRAMES

12 50 00 FURNITURE SYSTEMS

DIVISION 13 - SPECIAL CONSTRUCTION

13 48 00 SEISMIC PROTECTION FOR MISCELLANEOUS EQUIPMENT

DIVISION 21 - FIRE SUPPRESSION

21 13 13.00 10 WET PIPE SPRINKLER SYSTEM, FIRE PROTECTION

21 22 00.00 40 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS

DIVISION 22 - PLUMBING

22 00 00 PLUMBING, GENERAL PURPOSE

22 05 48.00 20 MECHANICAL SOUND, VIBRATION, AND SEISMIC CONTROL

22 07 19.00 40 PLUMBING PIPING INSULATION

DIVISION 23 - HEATING, VENTILATING, AND AIR CONDITIONING

23 00 00 AIR SUPPLY, DISTRIBUTION, VENTILATION, AND EXHAUST SYSTEMS

23 05 48.00 40 VIBRATION AND SEISMIC CONTROLS FOR HVAC PIPING AND

EQUIPMENT

23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC

23 07 00 THERMAL INSULATION FOR MECHANICAL SYSTEMS

23 08 00.00 10 COMMISSIONING OF HVAC SYSTEMS

23 09 00 INSTRUMENTATION AND CONTROL FOR HVAC

23 09 13 INSTRUMENTATION AND CONTROL DEVICES FOR HVAC

23 09 23.01 LONWORKS DIRECT DIGITAL CONTROL FOR HVAC AND OTHER

BUILDING CONTROL SYSTEMS

23 09 93 SEQUENCES OF OPERATION FOR HVAC CONTROL

23 11 25 FACILITY GAS PIPING

23 21 13.00 20 LOW TEMPERATURE WATER (LTW) HEATING SYSTEM

23 25 00 CHEMICAL TREATMENT OF WATER FOR MECHANICAL SYSTEMS

23 52 00 HEATING BOILERS

23 64 10 WATER CHILLERS, VAPOR COMPRESSION TYPE

23 81 23.00 20 COMPUTER ROOM AIR CONDITIONING UNITS

DIVISION 26 - ELECTRICAL

26 00 00.00 20 BASIC ELECTRICAL MATERIALS AND METHODS

26 05 00.00 40 COMMON WORK RESULTS FOR ELECTRICAL

26 05 48.00 10 SEISMIC PROTECTION FOR ELECTRICAL EQUIPMENT

26 05 71.00 40 LOW VOLTAGE OVERCURRENT PROTECTIVE DEVICES

26 08 00 APPARATUS INSPECTION AND TESTING

26 09 23.00 40 LIGHTING CONTROL DEVICES

26 20 00 INTERIOR DISTRIBUTION SYSTEM

26 24 13 SWITCHBOARDS

26 28 01.00 10 COORDINATED POWER SYSTEM PROTECTION

26 29 23 VARIABLE FREQUENCY DRIVE SYSTEMS UNDER 600 VOLTS

26 36 23.00 20 AUTOMATIC TRANSFER SWITCHES

26 51 00 INTERIOR LIGHTING

26 56 00 EXTERIOR LIGHTING

PROJECT TABLE OF CONTENTS Page 3

DIVISION 27 - COMMUNICATIONS

27 05 28.36 40 CABLE TRAYS FOR COMMUNICATIONS SYSTEMS

27 10 00 BUILDING TELECOMMUNICATIONS CABLING SYSTEM

27 11 16 COMMUNICATION EQUIPMENT ROOM FITTINGS HOT AISLE

CONTAINMENT ENCLOSURE

27 21 00.00 40 INTERCOMMUNICATION SYSTEM

DIVISION 28 - ELECTRONIC SAFETY AND SECURITY

28 05 26.00 40 GROUNDING AND BONDING FOR ELECTRONIC SAFETY AND SECURITY

28 20 01.00 10 ELECTRONIC SECURITY SYSTEM

28 23 23.00 10 CLOSED CIRCUIT TELEVISION SYSTEMS

28 31 76 INTERIOR FIRE ALARM AND MASS NOTIFICATION SYSTEM

DIVISION 31 - EARTHWORK

31 00 00 EARTHWORK

31 11 00 CLEARING AND GRUBBING

31 21 23 VAPOR INTRUSION MITIGATION

DIVISION 32 - EXTERIOR IMPROVEMENTS

32 05 33 LANDSCAPE ESTABLISHMENT

32 11 23 AGGREGATE BASE COURSE

32 12 10 BITUMINOUS TACK AND PRIME COATS

32 12 17 HOT MIX BITUMINOUS PAVEMENT

32 13 13.06 PORTLAND CEMENT CONCRETE PAVEMENT FOR ROADS AND SITE

FACILITIES

32 16 13 CONCRETE SIDEWALKS AND CURBS AND GUTTERS

32 17 24.00 10 PAVEMENT MARKINGS

32 31 13.53 HIGH-SECURITY CHAIN LINK FENCES AND GATES

32 31 19 METAL SLIDING GATES

32 93 00 EXTERIOR PLANTS

DIVISION 33 - UTILITIES

33 11 00 WATER DISTRIBUTION

33 11 23 NATURAL GAS PIPING

33 30 00 SANITARY SEWERS

33 71 02 UNDERGROUND ELECTRICAL DISTRIBUTION

33 82 00 TELECOMMUNICATIONS OUTSIDE PLANT (OSP)

-- End of Project Table of Contents --

PROJECT TABLE OF CONTENTS Page 4

Specif ications and draw ings attached.

Other notes:

Project Title: AMOC Bldg Expansion Construction Riverside County, CA

NAICS: 236220

Set-aside: Total Small Business Contract Type: Firm fixed price Basis of Aw ard: Low est Price, Technically Acceptable (LPTA), one phase Magnitude of Construction Project: Betw een $10,000,000 and $25,000,000 The contractor shall not begin on-site w ork until the bond documents and insurance certif icate have been accepted by the Contracting Officer and a Notice-To-Proceed, signed by the Contracting Officer, has been received and signed by the contractor.

Proposals due 1 August 2016, 2:00 PM Central Time

ALICE M AUSTIN 817-886-1267

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

01-Jul-2016

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

See Item 7

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

X

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________365 calendar days after receiving aw ard, notice to proceed. This performance period is X mandatory, negotiable. (See _________________________

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________ copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________ (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______120 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

US ARMY ENGINEER DISTRICT, FORT WORTH

ATTN: CESWF-CT

819 TAYLOR ST, ROOM 2A17

FORT WORTH TX 76102-0300

W9126G

PAGE OF PAGES

1 OF

CODE

(Title, identifying no., date):

12B. CALENDAR DAYS

(hour)

Sealed envelopes containing offers

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

817-886-6403FAX:TEL: 817-886-1043 TEL: FAX:

W9126G-16-R-0081 78

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

W9126G-16-R-0081

Section 00 11 00 - Standard Form (SF) 1442 and CLIN Schedule

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Job

Funded Amt:

ADP Area

The contractor shall furnish all personnel, materials, supplies, equipments and other items required to complete the work identified in the contract specifications and drawings, except for the areas idntified in the option items.

NAICS CD: 236220

, FSC CD: Y1AA

0002 Job

OPTION Funded Amt:

Option 1 Systems Work Area

The contractor shall furnish all personnel, materials, supplies, equipments and and drawingsfor the Systems Work Area

0003 Job

OPTION Funded Amt:

Option 2 Conference Center

The contractor shall furnish all personnel, materials, supplies, equipments and and drawingsfor the Conference Center.

0004 Job

OPTION Funded Amt:

Option 3 Exterior Canopy

The contractor shall furnish all personnel, materials, supplies, equipments and and drawingsfor the Exterior Area.

0005 Job

OPTION Funded Amt:

Option 4 Parking

OFFEROR'S NOTES

1. The Government intends to issue a Firm Fixed Price contract to the responsible offeror whose proposal represents the best value to the Government based on the evaluation criteria identified in this solicitation.

2. The total proposed price shall include all costs for the furnishing of all labor, material, equipment, etc., necessary to perform all work in strict accordance with the terms and conditions set forth in the contract to include all attachments.

3. Prices must be submitted on all individual line items of the Price Schedule; otherwise, the offer may be considered non-compliant and may be rejected.

4. Amounts and prices shall be indicated in figures.

Section 00 21 00 - Instructions, Conditions and Notices to Offerors

INSTRUCTIONS TO OFFERORS

NOTE: “Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.”

1. The Offeror shall submit an offer for the furnishing of all labor, material, equipment, etc., necessary to perform all work in strict accordance with the terms and conditions set forth in the contract to include all attachments.

2. The Government intends to evaluate proposals and award without discussions. The Government reserves the right to conduct discussions if the Contracting Officer determines them to be necessary.

3. PROPOSAL EXPENSE AND PREAWARD COSTS: The Government will not pay any costs incurred in the preparation and submission of the initial and/or any subsequent proposals.

4. INQUIRIES

a. General question or comments relative to these documents should be submitted via e-mail to:

Alice Austin Email: alice.m.austin@usace.army.mil Phone: 817-886-1267

b. Bidder Inquiry: Technical questions relating to proposal procedures or bonds are to be submitted via ProjNet at www.projnet.org/projnet.

c. The Bidder Inquiry Key is: 3HPDFF-49AS88

d. To submit and review bid inquiry items, bidders will need to be a current registered user or self register into the system. To self-register, go to the aforementioned web page and click on the BID tab. Select Bidder Inquiry, select agency USACE, enter the Bidder Inquiry Key for this solicitation, your email address, and then click login. Fill in all required information and click create user. Verify that information on next screen is correct and click “continue.”

*** Please Note: Offerors shall only submit one question per inquiry. Inquiries containing multiple questions may be rejected.

e. From this page, you may view all bidder inquiries or add an inquiry.

Include the solicitation number, project title and location of project with your questions.

Note that due to the highly constricted schedule and firm contract award dates for this requirement, inquiries MUST be received by this office not later than 5 business days prior to the proposal due date.

f. Offerors will receive an acknowledgement of their question via email, followed by an answer to their question after it has been processed by our technical team.

h. Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

i. The call center is operates weekdays from 8 A.M. to 5 P.M. U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

4. SITE VISIT INFORMATION:

Address for site visit is AMOC, 1355 Customs Way, March Air Reserve Base, CA 92518

Date: 18 July 2016 at 12:30 p.m. PST to 3:30 p.m. PST

SITE VISIT INSTRUCTIONS. The site visit will be an escorted tour in a group, thus the Bidder agrees to the following requirements:

DO NOT disturb occupants and/or their visitors.

PARKING. DO NOT park in the AMOC parking lot, or other AMOC prohibited and or reserved spaces. Parking in the AMOC parking lot and other AMOC prohibited and or reserved spaces could result in a Federal parking citation and or towing of vehicle.

SIGN-IN:

STEP ONE – the attached PASS INFORMATION SHEET MUST BE FILLED IN and

SUBMITTED NOT LESS THAN 5 CALENDAR DAYS PRIOR TO THE DAY OF THE SITE

VISIT to MICHAEL CALLIS at MICHAL.A.CALLIS@cbp.dhs.gov. This will enable your name to be listed. YOU NEED TO BE ON THE LIST TO ATTEND THE SITE VISIT.

STEP TWO - on the day of the site visit you will SIGN-IN with the U.S ARMY CORPS OF ENGINEERS at the north entrance to AMOC Building 605 at March ARB. The Bidder shall provide valid Government-issued picture identification (driver’s license, passport, etc.) which will be matched to the list developed in step one. The sign-in will begin at 12:30 p.m. PST which is 30 minutes before the actual tour will begin.

ACCESS. Will be made available except for RESTRICTED AREAS (restricted areas include the interior of the AMOC Buildings except for Room 122, the ADP and TELCO rooms, and several other rooms and exterior areas). If special access is necessary, please contact the USACE representative assigned for the site visit as necessary but this does not guarantee that access will become available.

PHOTOGRAPHS

A. Do NOT take photographs of agents and their visitors, in fore-ground or back-ground.

B. Photographs are limited to project features.

SIGNATURE IN THE SIGN-IN MEANS:

1. Bidder acknowledges that Bidder has read and fully understood, the following:

FAR 52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995);

INQUIRIES; and or EXPLANATION TO PROSPECTIVE OFFERORS

2. Bidder agrees to comply with March ARB and AMOC Security Requirements, and will only enter project sites, under AMOC escort. Non-compliance may result in removal off-campus by AMOC Security and bidder removed off-campus by AMOC Security will not be allowed to continue with this site visit.

3. Bidder agrees to stay in group while on premises and may be required to show proper ID, upon request.

4. Bidder agrees to sign-out with USACE. Site Visit is scheduled to begin and to end on the date and time indicated in the solicitation for the site visit. Extra time will not be granted.

5. POC for the site visit is the USACE Project Engineer, Erin Astudillo at

Erin.N.Astudillo@usace.army.mil or USACE Project Manager, Matthew Shun at matthew.h.shun@usace.army.mil.

FOR OFFICIAL USE ONLY

PASS INFORMATION SHEET

NAME OF COMPANY: __________________ DATE: ______________

START DATE: _____________ EXPIRATION DATE: ______________

VALID DAYS: M T W TH F S Sun VALID TIMES: _____________________

SPONSOR’s NAME: _________________ SPONSOR PHONE #:__________

CONTROLLED

AREA ESCORT

Name SSN Driver’s

License and State of Issue

DOB Area Escort

Ensure individuals bring the following items to Pass and Registration; (1) Driver’s License, (2) Registration and (3) Proof of Insurance

SPONSOR SIGNATURE DATE

Privacy Act Statement PRIVACY ACT-1974 as Amended applies – This memo may contain information which must be protected IAW DOD 5400-11, and it is For Official Use Only (FOUO) AUTHORITY: 10 U.S.C. 8013; 44 U.S.C. 3101; and EO 93397 PRINCIPAL PURPOSES: Used to record information and details of criminal activity which may require investigative action by commanders, supervisors, police, special agents, etc. ROUTINE USES: Information may be disclosed to Pass and Registration to determine base access. DISCLOSURE IS VOLUNTARY:

SSN is used to positively identify the individual as a conduit to check past criminal activity records. Failure to provide the request information will affect your ability to gain access to March AFB.

--END OF SECTION--

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management JUL 2013 52.215-1 Instructions to Offerors--Competitive Acquisition JAN 2004 52.217-5 Evaluation Of Options JUL 1990 52.225-10 Notice of Buy American Requirement--Construction

Materials

MAY 2014

52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-- Representation and Certifications.

OCT 2015

52.228-1 Bid Guarantee SEP 1996 52.236-28 Preparation of Proposals--Construction OCT 1997

CLAUSES INCORPORATED BY FULL TEXT

52.216-1 TYPE OF CONTRACT (APR 1984)

The Government contemplates award of a Firm Fixed Price contract resulting from this solicitation.

(End of provision)

52.222-38 COMPLIANCE WITH VETERANS' EMPLOYMENT REPORTING REQUIREMENTS (FEB 2016)

By submission of its offer, the offeror represents that, if it is subject to the reporting requirements of 38 U.S.C.

4212(d) (i.e., if it has any contract containing Federal Acquisition Regulation clause 52.222-37, Employment Reports on Veterans), it has filed the most recent VETS-4212 Report required by that clause.

52.233-2 SERVICE OF PROTEST (SEP 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from Linda Eadie, CECT-SWF, 819 Taylor St, Ft Worth, TX 76102.

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

52.236-27 SITE VISIT (CONSTRUCTION) (FEB 1995) – ALTERNATE I (FEB 1995)

(a) The clauses at 52.236-2, Differing Site Conditions, and 52.236-3, Site Investigations and Conditions Affecting the Work, will be included in any contract awarded as a result of this solicitation. Accordingly, offerors or quoters are urged and expected to inspect the site where the work will be performed.

(b) An organized site visit has been scheduled for—

18 July 2016 at 12:30 p.m. PST to 3:30 p.m. PST

(c) Participants will meet at--

AMOC, 1355 Customs Way, March Air Reserve Base, CA 92518

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (APR 1984)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any DFARS (48 CFR Chapter 2) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

Section 00 22 11 - Proposal Submission Requirements, Evaluation Criteria, and Basis of Award One Step - Best Value, Design-Build (Single Award)

SECTION 002211 Proposal Submission Requirements, Evaluation Criteria, and Basis of Award

PART I – GENERAL INFORMATION

As this is a competitive negotiation acquisition, there is no public bid opening and no information will be given out as to the number of offerors or the results of the competition until all awards are made.

Oral explanations or instructions are not binding. Any information given to an offeror which impacts the solicitation and/or offer will be given in the form of a written amendment to the solicitation.

PART II -- PROPOSAL PREPARATION

1. PROPOSAL SUBMISSION REQUIREMENTS AND INSTRUCTIONS

a. REQUIREMENT FOR SEPARATE PRICE AND TECHNICAL PROPOSALS.

(1) Each offeror must submit both a Price Proposal and a Technical Proposal. The Price Proposal and the Technical Proposal must be submitted as separate files. Ensure each separate file is clearly marked to indicate its contents and the identity of the offeror.

(2) Both the Price Proposal and the Technical Proposal must be received by the closing date and time set for receipt of proposals.

(3) No dollar amounts from the Price Proposal are to be included in the Technical Proposal.

(4) All information intended to be evaluated as part of the Technical Proposal must be submitted as part of the Technical Proposal. Do not merely cross-reference similar material in the Price Proposal, or vice versa. Also, do not include links to websites in lieu of incorporating information into your proposal.

(5) Do not include exceptions to the terms and conditions of the solicitation in either the technical or price proposal. Should the offer include any standard company terms and conditions that conflict with the terms and conditions of the solicitation, the offer may be determined "unacceptable" and thus ineligible for award. Should the offeror have any questions related to specific terms and conditions, these shall be resolved prior to submission of the offer.

b. DISCUSSIONS: The Government intends to evaluate proposals and award a task order without discussions with offerors, in accordance with FAR 52.215-1, Instructions to Offerors—Competitive Acquisitions, however the Government reserves the right to conduct discussions if the Contracting Officer determines them to be necessary.

c. GENERAL INSTRUCTIONS

(1) All pages must be numbered.

(2) Submit only the information/documents specifically required. Do not submit excess information, to include audio-visual materials, electronic media, etc.

(3) Do not use a font size smaller than 10, an unusual font style such as script, or condensed print for any submission. All page margins must be at least 1 inch wide, but may include headers and footers.

(4) The proposals must be organized by the TABs indicated in this section.

(5) “Confidential” projects cannot be submitted to demonstrate capability unless all of the information required for evaluation as specified herein can be provided to the Government as part of the Offeror’s technical proposal. Offerors that include in their proposals information that they do not want disclosed to the public for any purpose, or used by the Government except for evaluation purposes, must be clearly marked in accordance with the instructions at FAR 52.215-1, “Instructions to Offerors— Competitive Acquisition”, paragraph (e), “Restriction on disclosure and use of data”.

(6) In the case of an Offeror that is part of a large, multi-segmented business concern, provide information directly pertaining to the specific segment of the business concern (i.e., the division, group, unit, etc.) that will perform work under the prospective contract.

(7) For submissions with page limitations, the pages furnished for organizational purposes only, such as a “Table of Contents” or divider tabs, are not included in the page limitation.

d. INSTRUCTIONS FOR THE PRICE PROPOSAL AND MISC DOCUMENTS

Price Proposal: The Price Proposal file shall be appropriately titled as such. It shall consist of a cover letter and the CLIN Schedule (from Section 001100), completed in its entirety

Acknowledgement Sheet. A completed Acknowledgement Sheet (Attachment 1) shall be completed by the offeror and duly executed with an original signature by an official authorized to bind the company in accordance with instructions at FAR 4.102.

Bid Guarantee/bond. Submit a completed Bid Bond: Standard Form 24

Completed Representations and Certifications from Section 004500:

52.204-8 (if any updates to SAM apply)

52.209-7

e. INSTRUCTIONS FOR THE TECHNICAL PROPOSAL

The Technical Proposal will be appropriately labeled as follows:

Factor 1, EXPERIENCE Factor 2, TECHNICAL APPROACH Factor 3, PAST PERFORMANCE

Page Limitations. The following page limitations are established for each factor described above:

Factor 1, Experience - Limited to 5 pages Factor 2: Technical Approach – Limited to 5 pages Factor 3, Past Performance - No page limitation

FACTOR 1, EXPERIENCE: TECHNICAL NARRATIVE ON PROJECTS OF SIMILAR

SCOPE, MAGNITUDE, AND COMPLEXITY

The Offeror shall submit a completed Experience Information Form (Attachment 2) for at least two projects of similar scope, magnitude and complexity as the RFP requirement it and/or its proposed team (i.e., predecessor companies, key personnel who have relevant experience or subcontractors that will perform major or critical aspects of the requirement) has/have successfully completed within the past five years.

The Experience Information Form must include the Offeror’s role in the project (i.e., as a prime or a subcontractor), and be fully completed to be considered for this factor.

The specific elements that must be demonstrated to be considered of similar scope, magnitude and complexity as the RFP requirement are:

- Contract/TO/PO Dollar Value at least $6,000,000

- Experience with vertical construction of similar size and scope with predominance of management and responsibility for the project.

- Experience working within a secure DOD facility

- Experience working on a project ensuring continuity of adjacent existing operations throughout construction.

- Experience managing the transfer of operations to new facility without loss of function.

- Experience working with the USACE including Safety Manual EM385-1-1, 3 phase inspection process, Quality Control, Scheduling

The Offeror must explain why it believes the projects are similar in scope, magnitude and complexity to the RFP requirement.

If experience of predecessor companies, key personnel, or major subcontractors is submitted to qualify for this factor the offeror must include a statement indicating their role in the project being used as experience as well as the the percentage of work they will be performing in the proposed project. The Government will not consider the experience provided if it is determined the role in either project is not siginificant.

Failure to demonstrate the required experience or provide all required information will result in an “UNACCEPTABLE” rating and possible elimination from further consideration for award.

FACTOR 2, TECHNICAL APPROACH: TECHNICAL NARRATIVE ON TECHNICAL

APPROACH, METHODS AND PROCEDURES AND SCHEDULE

The Offeror must provide a narrative that includes, at a minimum, discussion of the proposed sequence of work, mandatory phasing, testing and balancing, and interim and final acceptance.

Offers must include a Gantt chart reflecting the major construction activities with the completion period from the applicable contract Notice to Proceed (NTP). The schedule must be graphically presented, and must be on a maximum paper size of 11”x17”. The schedule must reflect the major construction milestones and the sequence of work required for this project. The schedule must indicate start/finish dates of events and durations. A detailed network analysis is not required as a proposal submittal item.

The narrative must include:

- The Offeror’s technical understanding of the work requirements

- The Offeror’s commitment to accomplish all the work in accordance with the solicitation requirements and schedule

- The Offeror’s approach, methodology and plan for customer service

- The Offeror’s Quality Control procedures

- The Offeror’s construction safety protocols and procedures

- The workability of the Offeror’s approach as well as the technical feasibility to successfully perform on schedule

Offerors are cautioned that if they do not meet the project duration shown in Section 00 73 00 Paragraph 52.211-10, Commencement, execution and Completion of Work of this Request for Proposal their response for Evaluation Factor 2 will be rated Unacceptable. Schedules showing Government submittal review durations to be shorter than are contractually mandated will be rated Unacceptable.

FACTOR 3, PAST PERFORMANCE: For each project submitted under the Experience factor that does not have an evaluation in the Past Performance Information Retrieval System (PPIRS), which includes evaluations submitted in ACASS, CCASS, and CPARS, Offerors shall forward a copy of the Past Performance Evaluation Questionnaire (PPQ) included at Attachment 3 to the points of contact responsible for monitoring performance under those contracts for completion.

Completed PPQs shall be submitted by the offeror with the proposal. If unable to obtain a completed PPQ for a project timely the Offeror shall complete and submit with the proposal the first page of the PPQ, which will provide contract and client information for the respective project(s).

If any negative past performance information is received to which the Offeror has not previously had an opportunity to respond, the Offeror will be given an opportunity to provide rebuttal.

If a PPQ is received on a project that has an evaluation in PPIRS, the PPQ will not be considered.

f. DIRECTIONS FOR SUBMITTING PROPOSALS

Securely submit your proposal at the AMRDEC SAFE website, https://safe.amrdec.army.mil/SAFE2/

1) At the AMRDEC SAFE website select the link: “I do not have a CAC or this machine is not configured to read my CAC and I would like to access SAFE as a Guest User”.

2) Complete the required information. At “Files:” upload your proposal documents.

3) In the “Recipient Information” section, enter email address “alice.m.austin@usace.army.mil” and click “Add”

4) In the “Email Setting” section, select:

“FOUO”,

“Encrypt email message when possible”

“Notify me when files are downloaded”

“Require CAC for Pick-up”

5) In the “File Submission” section, click on “Upload”

Contractors are responsible for ensuring the Contracting Office receives their proposal by the due date/time.

Part III. EVALUATION OF PROPOSALS

1. GENERAL ELIGIBILITY FOR TASK ORDER AWARD: In accordance with the FAR, no task order shall be entered into unless the contracting officer ensures that all requirements of law, executive orders, regulations, and all other applicable procedures, including clearances and approvals, have been met.

2. BASIS OF AWARD: Selection for award will be determined using the Low-Priced, Technically Acceptable Process in accordance with FAR 15.101-2(b)(3). An evaluation for technical acceptability will be performed on each proposal. The technically acceptable proposal that provides the lowest price will be selected for award. To be considered technically acceptable, the technical factors in the proposal must NOT be determined to be unacceptable.

The failure of a proposal to meet any of the acceptability standards for non-cost factors will result in a technically unacceptable rating and preclude award. Tradeoffs are not permitted.

Proposals are not ranked using the non-price factor.

3. EVALUATION OF THE PRICE PROPOSALS

a. Price will be evaluated and considered but will not be scored or combined with other aspects of the proposal evaluation. The proposed prices will be analyzed for reasonableness.

They may also be analyzed to determine whether they are realistic for the work to be performed, reflect a clear understanding of the requirements, and are consistent with the information provided by the Offeror. Additionally, all offers will be analyzed for unbalanced pricing.

b. An offeror may be required to confirm its price on either a CLIN, element, or total price basis, and/or provide additional information in support of their price prior to task order award at the Government’s request and discretion.

4. GENERAL TECHNICAL CRITERIA

a. Failure to include all required information may cause the proposal to be considered non-responsive and not considered further for award.

b. Proposals which are generic, vague, or lacking in detail may be considered unacceptable.

5. EVALUATION OF THE TECHNICAL PROPOSAL:

FACTOR 1, EXPERIENCE:

One of the Following Ratings will be Assigned:

Rating Description

Acceptable Proposal meets the requirements of the solicitation.

Unacceptable Proposal does not meet the requirements of the solicitation.

The Government will review the project experience submitted up to the limits specified.

Offerors must meet all of the PROPOSAL SUBMISSION REQUIREMENTS for Factor 1, Experience to receive a “ACCEPTABLE” rating:

Failure to demonstrate the minimally acceptability standards under this factor will result in an “UNACCEPTABLE” rating and possible elimination from further consideration for award.

FACTOR 2, TECHNICAL APPROACH

One of the Following Ratings will be Assigned:

Rating Description

Acceptable Proposal meets the requirements of the solicitation.

Unacceptable Proposal does not meet the requirements of the solicitation.

The Government will review the project experience submitted up to the limits specified.

Offerors must meet all of the PROPOSAL SUBMISSION REQUIREMENTS for Factor 2, Technical Approach to receive a “ACCEPTABLE” rating:

Failure to demonstrate the minimally acceptability standards under this factor will result in an “UNACCEPTABLE” rating and possible elimination from further consideration for award.

FACTOR 3, PAST PERFORMANCE:

One of the Following Ratings will be Assigned:

Rating Description Acceptable Based on the offeror’s performance record, the Government has a reasonable expectation that the offeror will successfully perform the required effort, or the offeror’s performance record is unknown. (See note below.)

Unacceptable Based on the offeror’s performance record, the Government has no reasonable expectation that the offeror will be able to successfully perform the required effort.

Note: In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available or so sparse that no meaningful past performance rating can be reasonably assigned, the offeror shall be determined to have unknown past performance and shall be rated “acceptable.”

The Government will review the past performance information for the projects submitted for Factor 1, Experience and assign a rating of Acceptable or Unacceptable, as defined above.

The Government will also review recent and relevant evaluations in the PPIRS as well as any other source deemed appropriate by the Government.

Recent: All projects submitted must have been completed within the last 5 years with the Offeror being the the prime contractor.

Relevant: All projects submitted must be similar in size, scope, and complexity to that described in the solicitation.

If any negative past performance information is received to which the Offeror has not previously had an opportunity to respond, the Offeror will be given an opportunity to provide rebuttal.

END OF SECTION

SECTION 002211 ATTACHMENT 1

ACKNOWLEDGEMENT SHEET

Complete the following information and submit it with your offer:

1. Name and Address of Offeror:

2. DUNS, CAGE, and Tax Identification numbers:

3. Telephone Number:

4. Request for Proposal (RFP) Number:

5. Title of Project:

6. Names, titles, email addresses and telephone numbers of persons authorized to negotiate on the Offeror’s behalf:

7. Name and Title of Person Authorized to sign offer:

Signature:

Note: Proposals signed by an agent shall be accompanied by evidence of that agent’s authority, unless that evidence has been previously furnished to the issuing office.

8. Offer Date:

9. Amendments (Number and Date of Acknowledgement):

Number: Date: Number: Date:

10. The Offeror hereby agrees to perform the work at the prices specified in strict accordance with the terms and conditions of the RFP and any resulting award, if the offer is accepted in writing within ______ calendar days after the offers are due (Insert any number equal to or greater than the minimum requirement). Failure to insert any number means the Offeror accepts the minimum period stated. Offers providing less than the minimum requirement for Government acceptance after the date offers are due may be rejected..

SECTION 002211 ATTACHMENT 1

EXPERIENCE INFORMATION

(To be completed by Contractor)

1. Contractor:

Name:

Address:

2. Contract /Task Order(TO) /Purchase Order (PO) Number:

3. Contract/TO/PO Dollar Value:

4. Contract/TO /PO Status: Active Complete

Completion Date (w/ extensions):

5. Project Title:

Location:

6. Project Description-- to include the role of the contractor on the project and specific responsibilities of the contractor in performance of the effort:

7. Project Owner or Project Manager for the Client:

Name:

Address:

Telephone Number and E-mail:

Section 00 45 00 - Representations and Certifications

52.204-16 Commercial and Government Entity Code Reporting JUL 2015

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (APR 2016)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 236220.

(2) The small business size standard is $36.5M.

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certifications in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

( ) Paragraph (d) applies.

( ) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(iv) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(v) 52.209-2; Prohibition on Contracting with Inverted Domestic Corporations--Representation.

(vi) 52.209-5; Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(vii) 52.209-11, Representation by Corporations Regarding elinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(viii) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(ix) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(x) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xi) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiii) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xv) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA-designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xvi) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA- designated items.

(xvii) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xviii) 52.225-4, Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225- 3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $77,533, the provision with its Alternate II applies.

(D) If the acquisition value is $77,533 or more but is less than $100,000, the provision with its Alternate III applies.

(xix) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xx) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan--Certification. This provision applies to all solicitations.

(xxi) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran—Representation and Certification. This provision applies to all solicitations.

(xxii) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

(i) 52.204-17, Ownership or Control of Offeror.

(ii) 52.204-20, Predecessor of Offeror.

(iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

(iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.

(v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.

(vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA- Designated Products (Alternate I only).

(vii) 52.227-6, Royalty Information.

(A) Basic.

(B) Alternate I.

(viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The offeror has completed the annual representations and certifications electronically via the SAM website accessed through https://www.acquisition.gov. After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause Title Date Change

Any changes provided by the offeror are applicable to this…