A07_-_Solicitation.pdf

SEE ADDENDUM

(No Collect Calls)

W911QX-15-T-0130

b. TELEPHONE NUMBER

301-394-3165

8. OFFER DUE DATE/LOCAL TIME

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W911QX9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

CAITLIN B POLLOCK

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

0010624033-0002

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

US ARMY ACC - APG / ADELPHI CONT DIV

ACC - APG / ADELPHI DIV

2800 POWDER MILL ROAD

CCAP-SCA

ADELPHI MD 20783-1138

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE W905HZ 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

US ARMY IMCOM

RAYMOND WALKER

GARRISON-ADELPHI LABORATORY CENTER

2800 POWDER MILL ROAD

ADELPHI MD 20783

TEL: 301-394-5920 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

X 8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$38,500,000

NAICS:

562111

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF37

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W911QX-15-T-0130

Section SF 30 - BLOCK 14 CONTINUATION PAGE

DD1423

Contract Data Requirements List will be provided under seperate cover.

Date: 28 August 2015 Number of Pages: 9

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Job ALC Waste Management 2015

FFP

The Contractor shall provide Refuse Removal with Waste Stream Diversion services in accordance with the Performance Work Statement (PWS) attached.

FOB: Destination

PURCHASE REQUEST NUMBER: 0010624033-0002

R. WALKER, 301-394-5920

NET AMT

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE QTY X UNIT PRICE

AMOUNT

0002 1 Job OPTION ALC Waste Management 2016

FPAF

The Contractor shall provide Refuse Removal with Waste Stream Diversion services in accordance with the Performance Work Statement (PWS) attached for a Period of Performance of 2/1/2016 - 1/31/2017. The award fee of $5,000.00 for this Period of Performance will be included in the CLIN price and can be billed with final invoice for CLIN0002 after 1/31/2017 once the COR has notified the Contractor that they reached a 55% or higher diversion rate..

FOB: Destination

MAX AWARD FEE

TOTAL AMOUNT

0003 1 Job OPTION ALC Waste Management 2017

FPAF

The Contractor shall provide Refuse Removal with Waste Stream Diversion services in accordance with the Performance Work Statement (PWS) attached for a Period of Performance of 2/1/2017 - 1/31/2018. The award fee of $5,000.00 for this Period of Performance will be included in the CLIN price and can be billed with final invoice for CLIN0002 after 1/31/2017 once the COR has notified the Contractor that they reached a 55% or higher diversion rate.

0004 1 Job OPTION ALC Waste Management 2018

FPAF

The Contractor shall provide Refuse Removal with Waste Stream Diversion services in accordance with the Performance Work Statement (PWS) attached for a Period of Performance of 2/1/2018 - 1/31/2019. The award fee of $5,000.00 for this Period of Performance will be included in the CLIN price and can be billed with final invoice for CLIN0002 after 1/31/2017 once the COR has notified the Contractor that they reached a 55% or higher diversion rate.

Data Reporting/Deliverables

FFP

The Contractor shall provide all data deliverables in accordance with the DD Form 1423 attached in Section J of the contract.

Contract Manpower Reporting

FFP

Cost for Providing Accounting for Contract Services – ACC-APG 5152.237- 4900. Accounting for Contract Services Requirement, is included herein; the contractor is required to provide data on contractor manpower (including subcontractor manpower) for performance of this contract, in accordance with clause ACC-APG 5152.237-4900, located in Section A. Instructions, including the Contractor and Subcontractor User Guides, are available at the CMRA (Contractor Manpower Reporting Application) website at: https://cmra.army.mil. For further assistance, email the CMRA Help Desk at contractormanpower@hqda.army.mil.

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

Refuse Removal with Waste Stream Diversion

U.S. Army Garrison Adelphi Laboratory Center

C.1 Background: The primary mission of United States Army Garrison, Adelphi Laboratory Center (USAG, ALC) is to provide valuable support services and infrastructure to enable scientific research, development, and well-being of the workforce. USAG ALC serves the Soldier and collaborates with Army science and research by providing excellent laboratory facilities and support services at ALC and the Blossom Point Research Facility (BPRF). ALC is located at 2800 Powder Mill Road, Adelphi, Maryland in Prince George’s County. BPRF is located at 15000 Blossom Point Road, Welcome, Maryland in Charles County.

C.2 Objectives: The objective of this contract is to provide the requisite Solid Waste Diversion, Disposal, and related waste stream management utility services at ALC and BPRF. The Contractor shall dispose of refuse from ALC and BPRF and reduce quantities of material disposed of in landfills by increasing diversion by any legal process that avoids landfill disposal. In support of the goals of Executive Order (EO) 13693, Planning for Federal Sustainability in the Next Decade, the Contractor shall:

Divert at least 50 percent of non-hazardous solid waste annually and pursue opportunities for net-zero waste or additional diversion opportunities. Construction and demolition materials and debris are not included as a part of this requirement. EO 13693 defines diversion as redirecting materials from disposal in landfills or incinerators to recycling or recovery, excluding diversion to waste-to-energy facilities.The final outcomes and results shall include increasing the overall solid waste diversion rate, responsiveness, quality, final site condition, and acceptability to the customer.

The Contractor will earn an annual performance incentive through exceeding landfill diversion goals as detailed in Attachment 001 of the Request for Proposal.

C.3 Requirements:

C.3.1 Refuse and Recycling Removal Requirements:

C.3.1.1 The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, and supervision necessary to perform Solid Waste Diversion, Disposal, and related waste stream management utility services at ALC and BPRF for refuse and the following recyclable materials: mixed paper, comingled materials (aluminum cans and foil products, bi-metal steel/tin cans, glass bottles and jars, and plastic bottles and containers), cardboard, and scrap metal.

C.3.1.2 The Contractor shall determine proper disposition of all collected materials with landfill disposal being the last alternative after seeking any other legal diversion process.

C.3.1.3 The Contractor shall perform all work in such a manner as to minimize interference with normal operations on the installation.

C.3.1.4 The Contractor shall ensure both refuse and recyclable materials are disposed/recycled at a facility compliant with all local, state and federal regulatory requirements.

C.3.1.5 The Contractor shall obtain and provide a copy to the Government all necessary licenses and permits, in compliance with any applicable Federal, State, Local or Municipal laws, codes, or regulations, needed to perform the services detailed in this performance work statement.

C.3.1.6 The Contractor shall notify the COR before all refuse and recycling pick-ups at least twenty-four

(24) hours in advance.

C.3.1.7 The Contractor shall provide the COR a copy of the weight tickets, or any other official (from a refuse/recycling facility) documentation that shows the weight, as verification of tonnage removed for each of the refuse and recycling containers with the monthly invoice prior to Wide Area Workflow invoice submission. Weight tickets for containers that are not weighed at each pickup are not required on a monthly basis, but are required for the months that the quarterly weighing occurs.

C.3.1.8 The Contractor shall locate containers so as not to interfere with or block any sidewalks, entrance or access ways and shall be within the pick-up area designated by the Government. All containers with lids shall be left with top loading and side doors closed after each pick up.

C.3.1.9 The Contractor shall be responsible for clearing of all debris as a result of spillage during service, including any refuse that falls from containers.

C.3.1.10 Refuse and Recycling will not include hazardous waste upon pick up, and the Contractor shall not add any hazardous waste to the non-hazardous waste they pick up during performance of services under the PWS, as defined in Title 40 Code of Federal Regulation (CFR) Part 261 and/or Code of Maryland Regulations (COMAR) Title 26.

C.3.1.11 Upon discovering any inappropriate materials placed inside any collection container, the Contractor shall promptly notify the COR.

C.3.2 Refuse-Specific Services Requirements:

C.3.2.1 The Contractor shall load, transport, and dispose of all refuse stored in containers located at ALC and BPRF.

C.3.2.2 When using the Government-owned 35 Cubic Yard (CY) compactor, the Contractor shall disconnect the two (2) hydraulic lines before lifting the 35 CY compactor container and then re-connect the lines after the unit is collected.

C.3.2.3 The Contractor shall provide the personnel, materials and equipment necessary to collect and dispose of refuse from the ALC post restaurant that is not composted, recycled or reused. The Contractor shall locate the Contractor furnished refuse container(s) by the loading dock on the north side of ALC Building 204. Refuse collected shall be disposed of a minimum of once every week.

C.3.2.4 If the Contractor provides any 8 CY containers as a part of the requirement and does not weigh the refuse/recyclable materials each time the container is emptied, the Contractor shall weigh the tonnage of refuse removed from each of the 8 CY containers, located at ALC and BPRF, on a quarterly basis throughout the calendar year. ALC will use these weights to determine an average estimated weight for each container during the year.

C.3.3 Recycling-Specific Services Requirement:

C.3.3.1 The Contractor shall load, transport, and disposition recyclable materials stored in Contractor-provided containers located at ALC and BPRF. ALC promotes diversion and has established a solid waste recycling program for collecting the items requiring mandatory recycling by Montgomery County. Mixed paper and comingled materials (aluminum cans and foil products, bi-metal steel/tin cans, glass bottles and jars, and plastic bottles and containers) are collected in hallways and offices throughout the installation.

The Government will collect and transport these materials from the disposal containers throughout the building to the Recycling Center. Cardboard is collected and baled in the Recycling Center. Scrap metal is collected in roll-off dumpsters at the Adelphi site and at the Blossom Point site. The Contractor shall seek new ways to expand recycling at ALC and BPRF, provide suggestions to the COR for expansion, develop a plan for those approved by the COR, and then integrate the expansions into the services provided.

C.3.3.2 The Contractor shall, upon arrival at ALC, proceed to the loading dock at the rear of Building 205 and meet a Government escort (COR or designate) for the collection of recyclable materials from the Recycling Center.

The Government will collect cardboard from within the facility, transport to the ALC Recycling Center, and make bales. The Government will transport baled cardboard from the ALC Recycling Center to the Contractor's vehicle using a Government forklift. The weight of each bale will range from 900-1200 lbs (approximately 4’x 6’x 3’in size). Typically, the Contractor will be required to remove two (2) bales, though it may be up to six (6) bales, in a single call for service.

C.4 Deliverables & Meetings The Contractor shall ensure the monthly reports and training materials provided to the Government are provided electronically in compatible formats. Microsoft Office Suite 2007 is current version. “Compatible” means the document can be opened using the appropriate Microsoft Office 2007 component without any discernible effect on the text (e.g., loss of data) or the formatting of the document. If the Army changes office suite enterprise agreements, the Contractor shall ensure the documents remain backward compatible with currently used versions.

Changes to program versions and report formats shall be approved by the COR as the Army’s information upward requirements changes.

C.4.1 Monthly Report: The Contractor shall provide monthly reports detailing the total tonnage of all materials handled under this contract. The report shall identify the source of generation (by building number and container), the weights of materials collected by specific commodities (e.g., cardboard, comingled materials, divertible trash, non-divertible trash), and what the ultimate disposition was by specific commodities (e.g., recycled, composted, landfilled). Contractor shall provide the report to the COR by the tenth calendar day of the following month. The Contractor shall report disposal tonnage hauled to transfer facilities and landfill destinations each month in the regular monthly report. The Contractor shall report “for fee” and “no fee” diversion tonnage hauled each month in the monthly report.

C.4.2 Schedule: The Contractor shall provide a schedule at contract award to include pick up of Recycle/Refuse/Scrap Metal. If there are any pickup variations to the schedule during the period of performance, the Contractor shall notify the COR three (3) days in advance for acceptance and approval. If the Contractor determines that the schedule needs to be permanently adjusted, the Contractor shall submit an adjusted schedule to the COR and obtain approval prior to implementing any changes.

C.4.3 Safety Program Plan: The Contractor shall develop and maintain a site specific Safety Program Plan reflective of the Safety Requirements. The Safety Program Plan shall include procedures to identify and mitigate hazardous work conditions. The Safety Program Plan shall also include a hazard analysis and address the responsibilities and procedures that Contractor personnel will follow to mitigate hazards. The Contractor shall deliver the Safety Program Plan to the COR for acceptance within ten (10) days after contract award. After receiving the safety program plan, the COR will provide proposed changes to the Contractor within seven (7) days. Upon receipt of the proposed changes, the Contractor shall adjust the safety program plan as needed and send a revised copy back to the COR within three (3) days.

C.4.4 Quality Control Plan: The Contractor shall develop and maintain an effective Quality Control Program (QCP) to ensure services are performed in accordance with this PWS. The Contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services.

The Contractor’s QCP is the means by which they assure themselves that their work complies with the requirement of the contract. The Contractor shall deliver a quality control plan, reflective of the QCP, to the COR for acceptance within ten (10) days after contract award. After acceptance of the quality control plan the Contractor shall receive the COR’s acceptance in writing of any proposed changes.

C.4.5 Damage Reports: The Contractor shall record and report promptly to the COR all available facts relating to each instance of damage to Government property or injury to either Contractor or Government personnel. The Contractor shall maintain an accurate record of exposure data on all accidents or incidents related to work performed under this contract resulting in death, traumatic injury, occupational disease, or damage to property, materials, supplies, or equipment.

C.4.6 Training: The Contractor shall develop, for Government approval, a recurring training and on-site campaign directed toward ALC personnel explaining the procedures and benefits of diversion. The Contractor training materials provided shall be updated quarterly as the Contractor expands and improves the utility service. Examples of training documents include: published pamphlets, brochures, web-based promotions, or other informative media educational materials. The Contractor shall ensure representatives from their company are present for training sessions to answer questions from attendees.

C.4.7 Compost Plan: The Contractor shall develop a plan that establishes a method of collecting and composting organic materials, such as food waste from the post restaurant. The plan shall provide composting capability onsite or include delivery of the compostable materials to a permitted Composting Facility. The Contractor shall include a list of all materials required to collect and divert compost in the plan, including food collection containers. The Contractor shall deliver the Compost Plan to the COR for acceptance within thirty (30) days after contract award.

C.4.8 Post Award Conference/Periodic Progress Meetings: The Contractor shall attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, Contracting Officers Representative (COR), and other Government personnel, as appropriate, may meet periodically with the Contractor to review the Contractor's performance. At these meetings the contracting officer will apprise the Contractor of how the Government views the Contractor's performance and the Contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the Government.

C.5 Site/Security Requirements

C.5.1 Hours of Operation: The Contractor is responsible for providing services, between the hours of 0700 and 1600 Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings.

The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

C.5.2 Security Requirements: Contractor personnel performing work under this scope of work on the ALC or BPRF premises shall be citizens of the United States, either native-born or naturalized. No foreign nationals shall be permitted to ALC or BPRF. Cases of dual, or multiple, citizenships will be reviewed by security personnel.

C.5.3 All Contractor vehicles shall be identified with the company logo. Vehicles shall be subject to search and inspection while on the facility.

C.5.4 The Contractor shall be responsible for safeguarding all Government equipment, information and property provided for Contractor use. At the close of each work period, Government facilities, equipment, and materials shall be secured.

C.5.5 When entering buildings at ALC, the Contractor shall be responsible for obtaining security badges for all Contractor personnel. The Government will not provide escorts. To obtain a badge, each Contractor employee must have the following three favorably completed (i) A National Agency Check with Inquiries (NACI), comparable investigation, or investigation greater in scope, conducted by or for a U.S.

Government Agency or Department (ii) Two sets of fingerprints (iii) Completed an Electronic Questionnaire for Investigations Processing (e-QIP), prior to beginning work at ALC. Fingerprints can be made through ALC Security by appointment. No badge is required if not entering buildings, only a valid driver’s license.

C.6 Personnel Requirements

C.6.1 Key Personnel: The Contractor shall provide one (1) contract manager who has five (5) years of knowledge and experience in solid waste management with a focus on waste diversion to serve as the main point of contact who will be responsible for overall management of the work performed under this contract.

The name of this person and an alternate who shall act for the Contractor when the manager is absent shall be designated in writing to the KO and COR. The contract manager and alternate shall have full authority to act for the Contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available via telephone between 0700 and 1600, Monday through Friday except Federal holidays or when the Government facility is closed for administrative reasons. The contract manager or alternate does not have to be located on site.

C.6.2 The Contractor shall submit a Visitor Authorization Request (VAR) letter to the COR on company letterhead listing all contract employees (primary and absentee replacements) performing under this contract. The VAR shall identify the name, Social Security Number (SSN), date of birth, place of birth, citizenship, security clearance level (if interim clearance was granted include investigation type, date, and agency submitted to), and issuing authority for each employee.

C.6.3 Contractor Travel: Contractor will not be required to travel outside of the Washington, D.C.

metropolitan area during the performance of this contract. Local travel is expected to transport materials and complete site inspections.

C.7 Safety Requirements:

The Contractor shall conform to the safety requirements contained in the contract for all activities related to the accomplishment of the work, as well as, the requirements outlined in the US Army Corps of Engineers Safety and Health Requirements Manual EM 385-1-1 and Occupational Safety and Health Administration (OSHA) Standards, 29 CFR 1910. In cases where standards conflict, the most stringent requirement shall apply.

Where appropriate, the Contractor shall provide personal protective equipment such as, but not limited to: protective clothing, eyewear, hearing protection, gloves and safety shoes. The Contractor shall ensure the proper use of this personal protective equipment.

The Contractor shall ensure all personnel operating and performing refuse and recycle operations shall be fully trained, experienced and certified/licensed where required by federal, state or local laws for performing the required tasks and meet required health, safety and environmental standards.

C.8 Environmental Requirements/Regulations

Environmental Control: The Contractor shall comply with all applicable Federal, State, Local, and Army regulations governing environmental control. The Contractor shall obtain and provide copies of any required licenses and permits, as necessary, to comply with applicable Federal, State, local or municipal laws, codes or regulations during the performance of this work.

The Contractor shall ensure that their work is conducted in accordance with and in support of the goals of the ALC Environmental Management System (EMS). The ALC EMS goals are the following: (1) reduce hazardous waste generation, (2) recycle solid waste generated to the maximum extent practicable, and (3) reduce energy and water consumption.

The Contractor shall control environmental pollution related to the collection and disposal of refuse/recycling operations under this contract.

The Contractor shall ensure vehicles used in the performance of service under this contract are maintained to prevent leaking oil and fluids.

The Contractor shall not discharge any materials (including oils, hazardous substances, waters, wash waters, sediments, etc.) anywhere on the facility, including sanitary and storm sewers, without prior consent from the ALC Directorate of Public Works (DPW) Environmental Division.

The Contractor shall provide and maintain an adequate supply of absorbent and other spill management materials on the jobsite. Upon occurrence of any spill or fire, the Contractor or his agent shall immediately contain the spill and call (301) 394-1117 to report the incident. The Contractor shall be responsible for cleaning up any spills to the satisfaction of the ALC DPW Environmental Division and the State of Maryland Waste Management Administration, at no additional expense to the Government.

The Contractor shall submit a list of all hazardous materials and chemicals used in the performance of this work to the ALC DPW Environmental Division for approval prior to use.

Green Procurement: In order to comply with federally mandated green procurement requirements and Department of Defense (DOD) and Department of the Army (DA) Green Procurement Program (GPP) policies, ALC requires the purchase, supply, and use of environmentally preferable products and utility services. Program elements include:

recovered material products, energy and water efficient products, alternative fuels and fuel efficiency, bio-based products, non-ozone depleting substances, and environmentally preferable products. These elements are described on the Office of Federal Procurement Policy website (http://www.whitehouse.gov/omb/procurement_index_green/).

The Contractor shall comply with all applicable Federal, DOD, DA, and ALC green procurement laws and policies.

If compliant products are unavailable or determined to be impracticable based on cost or performance, the Contractor shall contact the Contracting Officer or his representative for further guidance.

APPLICABLE PUBLICATIONS

The Contractor shall abide by all applicable regulations, publications, manuals, and local policies and procedures referenced below:

40 CFR 261, Identification and Listing of Hazardous Waste

1990 Clean Air Act, Title VII (Published Statue)

NFPA 1 Fire Code, 2009 edition, Section 19 Combustible Waste and Refuse

29 CFR 1910, Occupational Safety and Health Standards

Code of Maryland Regulations (COMAR), Title 26, Subtitle 04, Chapter 07, Solid Waste Management

Montgomery County (MD) Code chapter 48, Solid Waste

Executive Order 13514 – Federal Leadership in Environmental, Energy, and Economic Performance

United States Army Garrison (USAG) Plan 190-5: Motor Vehicle Supervision Traffic Plan

AWARD FEE EXPLANATION

Per the Perfomance Work State, the Contractor is required to divert at least 50% of non-hazardous solid waste annually and pursue opportunities for net-zero waste or additional diversion opportunities. If the Contractor is able to demonstrate that they have diverted at least 55% of non-hazardous solid waste annually for CLINs 0002, 0003, and 0004 if exercised, they will receive a $5,000.00 incentive award per year they meet the 55% incentive goal.

Therefore, the Contractor is elegible to receive $15,000.00 in award fee throughout the life of the contract if all options are exercised and the incentive goal of 55% diversion is demonstrated each year.

WAGE DETERMINATIONS UNDER SCA

WD 05-2103 (Rev.-16) was first posted on www.wdol.gov on 07/14/2015

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2005-2103 Daniel W. Simms Division of | Revision No.: 16 Director Wage Determinations| Date Of Revision: 07/08/2015 Note: Executive Order (EO) 13658 establishes an hourly minimum wage of $10.10 for 2015 that applies to all contracts subject to the Service Contract Act for which the solicitation is issued on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.10 (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: District of Columbia, Maryland, Virginia

Area: District of Columbia Statewide Maryland Counties of Calvert, Charles, Frederick, Montgomery, Prince George's, St Mary's Virginia Counties of Alexandria, Arlington, Fairfax, Falls Church, Fauquier, King George, Loudoun, Prince William, Stafford **Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.08 01012 - Accounting Clerk II 16.92 01013 - Accounting Clerk III 22.30 01020 - Administrative Assistant 31.41 01040 - Court Reporter 21.84 01051 - Data Entry Operator I 14.38 01052 - Data Entry Operator II 15.69 01060 - Dispatcher, Motor Vehicle 17.87 01070 - Document Preparation Clerk 14.21 01090 - Duplicating Machine Operator 14.21 01111 - General Clerk I 14.88 01112 - General Clerk II 16.24 01113 - General Clerk III 18.74 01120 - Housing Referral Assistant 25.29 01141 - Messenger Courier 13.62

01191 - Order Clerk I 15.12 01192 - Order Clerk II 16.50 01261 - Personnel Assistant (Employment) I 18.15 01262 - Personnel Assistant (Employment) II 20.32 01263 - Personnel Assistant (Employment) III 22.65 01270 - Production Control Clerk 22.03 01280 - Receptionist 14.43 01290 - Rental Clerk 16.55 01300 - Scheduler, Maintenance 18.07 01311 - Secretary I 18.07 01312 - Secretary II 20.18 01313 - Secretary III 25.29 01320 - Service Order Dispatcher 16.98 01410 - Supply Technician 28.55 01420 - Survey Worker 20.03 01531 - Travel Clerk I 13.29 01532 - Travel Clerk II 14.36 01533 - Travel Clerk III 15.49 01611 - Word Processor I 15.63 01612 - Word Processor II 17.67 01613 - Word Processor III 19.95 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 25.26 05010 - Automotive Electrician 23.51 05040 - Automotive Glass Installer 22.15 05070 - Automotive Worker 22.15 05110 - Mobile Equipment Servicer 19.04 05130 - Motor Equipment Metal Mechanic 24.78 05160 - Motor Equipment Metal Worker 22.15 05190 - Motor Vehicle Mechanic 24.78 05220 - Motor Vehicle Mechanic Helper 18.49 05250 - Motor Vehicle Upholstery Worker 21.63 05280 - Motor Vehicle Wrecker 22.15 05310 - Painter, Automotive 23.51 05340 - Radiator Repair Specialist 22.15 05370 - Tire Repairer 14.44 05400 - Transmission Repair Specialist 24.78 07000 - Food Preparation And Service Occupations 07010 - Baker 13.85 07041 - Cook I 12.55 07042 - Cook II 14.60 07070 - Dishwasher 10.11 07130 - Food Service Worker 10.66 07210 - Meat Cutter 18.08 07260 - Waiter/Waitress 9.70 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.86 09040 - Furniture Handler 14.06 09080 - Furniture Refinisher 20.23 09090 - Furniture Refinisher Helper 15.52 09110 - Furniture Repairer, Minor 17.94 09130 - Upholsterer 19.86 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.54 11060 - Elevator Operator 10.54

11090 - Gardener 17.52 11122 - Housekeeping Aide 11.83 11150 - Janitor 11.83 11210 - Laborer, Grounds Maintenance 13.07 11240 - Maid or Houseman 11.26 11260 - Pruner 11.58 11270 - Tractor Operator 16.04 11330 - Trail Maintenance Worker 13.07 11360 - Window Cleaner 12.85 12000 - Health Occupations 12010 - Ambulance Driver 20.41 12011 - Breath Alcohol Technician 20.27 12012 - Certified Occupational Therapist Assistant 23.11 12015 - Certified Physical Therapist Assistant 21.43 12020 - Dental Assistant 17.18 12025 - Dental Hygienist 44.75 12030 - EKG Technician 27.67 12035 - Electroneurodiagnostic Technologist 27.67 12040 - Emergency Medical Technician 20.41 12071 - Licensed Practical Nurse I 19.07 12072 - Licensed Practical Nurse II 21.35 12073 - Licensed Practical Nurse III 24.13 12100 - Medical Assistant 15.01 12130 - Medical Laboratory Technician 18.04 12160 - Medical Record Clerk 17.42 12190 - Medical Record Technician 19.50 12195 - Medical Transcriptionist 18.77 12210 - Nuclear Medicine Technologist 37.60 12221 - Nursing Assistant I 10.80 12222 - Nursing Assistant II 12.14 12223 - Nursing Assistant III 13.98 12224 - Nursing Assistant IV 15.69 12235 - Optical Dispenser 20.17 12236 - Optical Technician 15.80 12250 - Pharmacy Technician 18.12 12280 - Phlebotomist 15.69 12305 - Radiologic Technologist 31.11 12311 - Registered Nurse I 27.64 12312 - Registered Nurse II 33.44 12313 - Registered Nurse II, Specialist 33.44 12314 - Registered Nurse III 40.13 12315 - Registered Nurse III, Anesthetist 40.13 12316 - Registered Nurse IV 48.10 12317 - Scheduler (Drug and Alcohol Testing) 21.73 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 19.86 13012 - Exhibits Specialist II 24.61 13013 - Exhibits Specialist III 30.09 13041 - Illustrator I 20.48 13042 - Illustrator II 25.38 13043 - Illustrator III 31.03 13047 - Librarian 33.88 13050 - Library Aide/Clerk 14.21 13054 - Library Information Technology Systems 30.60 Administrator

13058 - Library Technician 19.89 13061 - Media Specialist I 18.73 13062 - Media Specialist II 20.95 13063 - Media Specialist III 23.36 13071 - Photographer I 16.65 13072 - Photographer II 18.90 13073 - Photographer III 23.67 13074 - Photographer IV 28.65 13075 - Photographer V 33.76 13110 - Video Teleconference Technician 20.39 14000 - Information Technology Occupations 14041 - Computer Operator I 18.92 14042 - Computer Operator II 21.18 14043 - Computer Operator III 23.60 14044 - Computer Operator IV 26.22 14045 - Computer Operator V 29.05 14071 - Computer Programmer I (see 1) 26.36 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.92 14160 - Personal Computer Support Technician 26.22 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 36.47 15020 - Aircrew Training Devices Instructor (Rated) 44.06 15030 - Air Crew Training Devices Instructor (Pilot) 52.81 15050 - Computer Based Training Specialist / Instructor 36.47 15060 - Educational Technologist 35.31 15070 - Flight Instructor (Pilot) 52.81 15080 - Graphic Artist 26.80 15090 - Technical Instructor 25.08 15095 - Technical Instructor/Course Developer 30.67 15110 - Test Proctor 20.20 15120 - Tutor 20.20 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 9.88 16030 - Counter Attendant 9.88 16040 - Dry Cleaner 12.94 16070 - Finisher, Flatwork, Machine 9.88 16090 - Presser, Hand 9.88 16110 - Presser, Machine, Drycleaning 9.88 16130 - Presser, Machine, Shirts 9.88 16160 - Presser, Machine, Wearing Apparel, Laundry 9.88 16190 - Sewing Machine Operator 13.78 16220 - Tailor 14.66 16250 - Washer, Machine 10.88 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 21.14 19040 - Tool And Die Maker 23.38 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.02 21030 - Material Coordinator 22.03

21040 - Material Expediter 22.03 21050 - Material Handling Laborer 13.83 21071 - Order Filler 15.09 21080 - Production Line Worker (Food Processing) 18.02 21110 - Shipping Packer 15.09 21130 - Shipping/Receiving Clerk 15.09 21140 - Store Worker I 11.72 21150 - Stock Clerk 16.86 21210 - Tools And Parts Attendant 18.02 21410 - Warehouse Specialist 18.02 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 27.21 23021 - Aircraft Mechanic I 25.83 23022 - Aircraft Mechanic II 27.21 23023 - Aircraft Mechanic III 28.53 23040 - Aircraft Mechanic Helper 17.54 23050 - Aircraft, Painter 24.73 23060 - Aircraft Servicer 19.76 23080 - Aircraft Worker 21.01 23110 - Appliance Mechanic 21.75 23120 - Bicycle Repairer 14.43 23125 - Cable Splicer 26.02 23130 - Carpenter, Maintenance 21.40 23140 - Carpet Layer 20.49 23160 - Electrician, Maintenance 27.98 23181 - Electronics Technician Maintenance I 24.94 23182 - Electronics Technician Maintenance II 26.47 23183 - Electronics Technician Maintenance III 27.89 23260 - Fabric Worker 19.13 23290 - Fire Alarm System Mechanic 22.91 23310 - Fire Extinguisher Repairer 17.62 23311 - Fuel Distribution System Mechanic 22.81 23312 - Fuel Distribution System Operator 19.38 23370 - General Maintenance Worker 21.43 23380 - Ground Support Equipment Mechanic 25.83 23381 - Ground Support Equipment Servicer 19.76 23382 - Ground Support Equipment Worker 21.01 23391 - Gunsmith I 17.62 23392 - Gunsmith II 20.49 23393 - Gunsmith III 22.91 23410 - Heating, Ventilation And Air-Conditioning 23.89 Mechanic 23411 - Heating, Ventilation And Air Contditioning 25.17 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 22.91 23440 - Heavy Equipment Operator 22.91 23460 - Instrument Mechanic 22.59 23465 - Laboratory/Shelter Mechanic 21.75 23470 - Laborer 14.98 23510 - Locksmith 21.90 23530 - Machinery Maintenance Mechanic 23.12 23550 - Machinist, Maintenance 22.91 23580 - Maintenance Trades Helper 18.27 23591 - Metrology Technician I 22.59 23592 - Metrology Technician II 23.80

23593 - Metrology Technician III 24.96 23640 - Millwright 28.19 23710 - Office Appliance Repairer 22.96 23760 - Painter, Maintenance 21.75 23790 - Pipefitter, Maintenance 24.63 23810 - Plumber, Maintenance 22.29 23820 - Pneudraulic Systems Mechanic 22.91 23850 - Rigger 22.91 23870 - Scale Mechanic 20.49 23890 - Sheet-Metal Worker, Maintenance 22.91 23910 - Small Engine Mechanic 20.49 23931 - Telecommunications Mechanic I 29.95 23932 - Telecommunications Mechanic II 31.55 23950 - Telephone Lineman 27.41 23960 - Welder, Combination, Maintenance 22.91 23965 - Well Driller 22.91 23970 - Woodcraft Worker 22.91 23980 - Woodworker 17.62 24000 - Personal Needs Occupations 24570 - Child Care Attendant 12.79 24580 - Child Care Center Clerk 17.77 24610 - Chore Aide 10.57 24620 - Family Readiness And Support Services 16.90 Coordinator 24630 - Homemaker 18.43 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 27.30 25040 - Sewage Plant Operator 20.84 25070 - Stationary Engineer 27.30 25190 - Ventilation Equipment Tender 19.49 25210 - Water Treatment Plant Operator 20.84 27000 - Protective Service Occupations 27004 - Alarm Monitor 20.57 27007 - Baggage Inspector 12.71 27008 - Corrections Officer 22.80 27010 - Court Security Officer 24.72 27030 - Detection Dog Handler 20.57 27040 - Detention Officer 22.80 27070 - Firefighter 24.63 27101 - Guard I 12.71 27102 - Guard II 20.57 27131 - Police Officer I 26.52 27132 - Police Officer II 29.67 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.59 28042 - Carnival Equipment Repairer 14.63 28043 - Carnival Equpment Worker 9.24 28210 - Gate Attendant/Gate Tender 13.01 28310 - Lifeguard 11.59 28350 - Park Attendant (Aide) 14.56 28510 - Recreation Aide/Health Facility Attendant 10.62 28515 - Recreation Specialist 18.04 28630 - Sports Official 11.59 28690 - Swimming Pool Operator 18.21 29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 23.13 29020 - Hatch Tender 23.13 29030 - Line Handler 23.13 29041 - Stevedore I 21.31 29042 - Stevedore II 24.24 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 39.92 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 26.84 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.56 30021 - Archeological Technician I 20.19 30022 - Archeological Technician II 22.60 30023 - Archeological Technician III 27.98 30030 - Cartographic Technician 27.98 30040 - Civil Engineering Technician 26.41 30061 - Drafter/CAD Operator I 20.19 30062 - Drafter/CAD Operator II 22.60 30063 - Drafter/CAD Operator III 25.19 30064 - Drafter/CAD Operator IV 31.00 30081 - Engineering Technician I 22.92 30082 - Engineering Technician II 25.72 30083 - Engineering Technician III 28.79 30084 - Engineering Technician IV 35.64 30085 - Engineering Technician V 43.61 30086 - Engineering Technician VI 52.76 30090 - Environmental Technician 27.41 30210 - Laboratory Technician 23.38 30240 - Mathematical Technician 28.94 30361 - Paralegal/Legal Assistant I 21.36 30362 - Paralegal/Legal Assistant II 26.47 30363 - Paralegal/Legal Assistant III 32.36 30364 - Paralegal/Legal Assistant IV 39.16 30390 - Photo-Optics Technician 27.98 30461 - Technical Writer I 21.93 30462 - Technical Writer II 26.84 30463 - Technical Writer III 32.47 30491 - Unexploded Ordnance (UXO) Technician I 24.74 30492 - Unexploded Ordnance (UXO) Technician II 29.93 30493 - Unexploded Ordnance (UXO) Technician III 35.88 30494 - Unexploded (UXO) Safety Escort 24.74 30495 - Unexploded (UXO) Sweep Personnel 24.74 30620 - Weather Observer, Combined Upper Air Or (see 2) 25.19 Surface Programs 30621 - Weather Observer, Senior (see 2) 27.98 31000 - Transportation/Mobile Equipment Operation Occupations 31020 - Bus Aide 14.32 31030 - Bus Driver 20.85 31043 - Driver Courier 13.98 31260 - Parking and Lot Attendant 10.07 31290 - Shuttle Bus Driver 15.66 31310 - Taxi Driver 13.98 31361 - Truckdriver, Light 15.66 31362 - Truckdriver, Medium 17.90 31363 - Truckdriver, Heavy 19.18 31364 - Truckdriver, Tractor-Trailer 19.18 99000 - Miscellaneous Occupations

99030 - Cashier 10.03 99050 - Desk Clerk 11.58 99095 - Embalmer 23.05 99251 - Laboratory Animal Caretaker I 11.30 99252 - Laboratory Animal Caretaker II 12.35 99310 - Mortician 31.73 99410 - Pest Controller 17.69 99510 - Photofinishing Worker 13.20 99710 - Recycling Laborer 18.50 99711 - Recycling Specialist 22.71 99730 - Refuse Collector 16.40 99810 - Sales Clerk 12.09 99820 - School Crossing Guard 13.43 99830 - Survey Party Chief 21.94 99831 - Surveying Aide 13.63 99832 - Surveying Technician 20.85 99840 - Vending Machine Attendant 14.43 99841 - Vending Machine Repairer 18.73 99842 - Vending Machine Repairer Helper 14.43

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.27 per hour or $170.80 per week or $740.13 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives.

Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used.

All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material…