A21._Dining_Table_Salient_Characteristics.pdf

Technical Proposal

Table, Dinning: Same or Equal dimensions/capacity and function is acceptable for Salient Characteristics.

ITEM – TABLE, DINNING - 63”W X 39”D X 30”H, MAHOGANY

COLOR

TABLE, DINNING SPEC

Item. Table, Dinning (Quantity 100)

SIZE: 63”W X 39”D X 30”H

A. EXTENDED DESCRIPTION:

(1) All items shall meet or exceed section of ANSI/BIFMA X5.5-1989.

(2) All case goods shall be constructed in accordance with AWI 400.

(3) All wood shall be kiln-dried to a moisture content of 5-8%.

(4) Adhesive shall conform to ASTM D-905 block shear strength of not less than 19 300 Kpa (2800 lbs per sq in).

B. SPECIFICATIONS:

(1) Designed for disassembly and assembly/knockdown/repairable style

(2) Rectangular table top shape- Transitional Style

(3) Seats up to 4~6 people

(4) Solid hardwood construction with oak veneer table top (Not using Particle board).

(5) Material: Solid Oak wood, rectangle edge, mortise and tendon constructed using glue and hardwood reinforcing cleats and screws, using natural oak wood for side molding.

(6) Dining top board: minimum 3mm ply wood + 0.4mm Oak Veneer + 25mm MDF

(7) Urethane Coating (More than 6 times): Finish completed in a 5 Step Process (1. Stain, 2. Seal, 3.

Stain, 4. Seal, 5. Top coat seal, Double Dyed)

(8) Leg: Natural Solid Oak Frame, 4 curved Legs.

(9) Color: Mahogany (Repeat 10 times and finish with a polyurethane paint).

(10) Leg Gliders: on the beneath of all the legs, to prevent any scratches on the floor.

(11) No Joists of surface.

(12) Smoothly rounded edge: 4 edges of top board are carved 8R equally by carving machine.

(13) ANSI/BIFMA x 5.5-2014 tested

(14) Finish shall comply with AWI Section 1500 system 1 or 7 unless otherwise indicated.

a. Preparations for Finishing: Comply with referenced quality standard for sanding, filling countersunk fasteners, sealing concealed surfaces of Architectural woodwork, as applicable to each unit of work.

b. Wash-coat for Stained Finish: Apply a vinyl wash-coat to woodwork made from closed-grain wood before staining and finishing.

c. Filled Finish for open-Grain woods: After staining (if any) apply paste wood filler to open-grain woods and wipe off excess.

d. Transparent Finish: Comply with requirements indicated below for grade, finish system, staining, effect, and sheen, with sheen measured on 25 degrees gloss meter per ASTM D 523.

(a) Grade: Premium.

(b) Staining: Matched approved sample for color.

(15) Adhesives: The adhesives shall be urea-resin or phenol-resin. The adhesives shall be used in strict accordance with the manufacturer's instruction. Adhesive shall be used on all joints in reassembling. Joints shall be true perfect, well glued throughout and held under pressure until adhesive has set.

(16) Floor Protector: Material such as kind of material (wood only not plastic), construction, size, density etc. shall be similar to those in the original item.

(17) WARRANTY: Warranty for vendor shall be at minimum three years in a written statement.

(18) Upon receipt of award, the contractor shall provide one (1) sample product with a full size for approval within 14 calendar days. Once the sample product is approved, the contractor shall deliver entire quantities within 45 days of acceptance of sample product.

(19) Vendor must Attached Outside of box Information sheet, and Individual packing should include separate carton box for each item.

0.4mm Oak Veneer 3mm Solid Oak bonded

25mm MDF

3mm Plywood

0.4mm Cherry Wood Grain 31.8mm