Attachment_0001_16R0051_Specification.pdf

SOLICITATION

SPECIFICATION

ATTACHMENT 0001

05 May 2016

MINE ROLLER

THE ROLLER SHALL BE PROVIDED WITH ALL NEW PARTS AND THE FOLLOWING

MINIMUM EQUIPMENT AND CAPABILITIES:

1. EQUIPMENT

1.1. Attachment to Vehicle: The roller system shall be capable of attachment to the roller system utilizing existing US Army Roller interface brackets.

1.2. Tongue Weight: The roller tongue weight shall not exceed 700 lbs. to the host vehicle

1.3. Roller weight: Roller System weight shall not exceed 5,500 lbs.

1.4. Length: The total roller system length shall be greater than 5 feet and not exceed 12 feet in length

1.5. Roller Width: The roller system width of roller coverage shall be no greater than 130 inches

1.6. Human Factors: Roller System shall not have sharp projections and/or edges to the structure of the roller that may cause operator/maintainer injury.

1.7. Splash Guards: Roller system shall incorporate splash guards to prevent and or reduce the amount of mud, water or gravel type debris from rapidly obscuring the driver’s field of view.

1.8. Roller Height: Roller height shall not obstruct the drivers and front passenger field of view to the point where the operator and front passenger cannot see the road 40 feet in front of the roller.

1.9. Active down Pressure to roller wheels: Any active down pressure applied shall not exceed the removal of more than 5% of the vehicles weight off of the front axle.

1.10. Fluids: The roller hydraulic system shall utilize 15W40 Multi-Purpose oil.

1.11. Maintainability: Roller maintenance shall not require any special tooling

1.12. Parking: Roller system jack stands and wheel chock shall prevent the roller from moving on longitudinal grades of up to 5%

1.13. Installation: The roller system shall not require the use of Material Handling Equipment to remove or install.

2. BRAKES

2.1. Braking: Host Platform shall be capable of stopping within 40 feet from 20 mph IAW the distance requirements set forth in FMCSR 393.52 without any damage to the vehicle.

3. ELECTRICAL SYSTEM

3.1. Electrical Power: Electrical power draw from the host roller shall not exceed a continual power draw of 30 AMPS and not exceed a power demand of 100 AMPS for 10 seconds.

3.2. Electrical Power Connection: Roller electrical system shall operate with 28 VDC, utilizing the North Atlantic Treaty Organization (NATO) slave starting receptacle.

4. COLOR

4.1. The exterior color shall be Desert Tan, or the closest commercial equivalent.

5. MANUALS

5.1. Commercial user manuals shall be provided in Dari and Pashtu.

SOLICITATION

SPECIFICATION

ATTACHMENT 0001

05 May 2016

6. RADIO FREQUENCY IDENTIFICATION (RFID) TAGS

6.1. Each roller or item shall be tagged with a removable active RFID data rich tracking tag, specifically designated as either:

6.1.1. Identec I-Q310 DRT

6.1.2. Savi ST-654-031

6.1.3. Evigia EV3-DRT

6.2. The active RFID tag shall have at least 128 Kbytes of memory.

6.3. The active RFID tag shall be compliant with ISO 18000/7 standards.

6.4. The tag shall be located on the exterior front of the roller.

6.5. The tag shall be securely affixed to the roller or item with two or more plastic cable ties.

6.6. The tag data and electronic data field format shall be in accordance with specifications established by

Joint Total Asset Visibility (JTAV) version 2.0, section 3.4.1 “Commodity Item Database Format” with the following clarifications:

6.6.1. The “document field” titled “DOCUMENT” shall be the document number (e.g. “milstrip”) as specified by the Government procuring agency.

6.6.2. The “MISC1” field shall be the item serial number, if available.

6.6.3. The “MISC2” field shall be used for user comments (e.g. contract number).

6.6.4. The JTAV - V2.0 data format specification is available at:

http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divis ions1/Logistics/4RF_Tag_Data_Specification_V2.pdf http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf http://www.ndia.org/Divisions/Divisions/Logistics/Documents/Content/ContentGroups/Divisions1/Logistics/4RF_Tag_Data_Specification_V2.pdf

MINE ROLLER