Attachment_0012_-_SPI-AM13061383_(Adjustable_Bipod).pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for

Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. DoD SPI NO.

13061383 ADJUSTABLE BIPOD (LWT) MWO KIT FOR M240L 19200 AM13061383

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

1005-01-651-2258 160331 A / L15K2078

7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.

FT.)(0.000)

11. UNIT PACK SIZE (INCHES)(00.0)

1/EA 3.5 0.250 12.88 X 8.4 X 4.0

18.

STEPS

19.

REQD

20.

DESCRIPTION

12. MILITARY PRESERVATION 1 1 BOX: ASTM D5118/D5118M, RSC, W5c

MIL-STD-2073-1, METHOD 10 2 AR CLOSURE: ASTM D1974/D1974M, SEALING

METHOD B

13. CLEANING SEE BLOCK 17 FOR DETAILED PACKAGING

STEPS *

14. DRYING

15. PACKING

a. LEVEL A

MIL-STD-2073-1

b. LEVEL B

MIL-STD-2073-1

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREON OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR

AS OTHERWISE SPECIFIED HEREIN.

TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. INSPECTIONS, QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH APPENDIX G OF MIL-STD-2073-1, OR AS OTHERWISE

SPECIFIED.

* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-

STD-2073-1.

THE FOLLOWING ITEMS SHALL BE PACKED TOGETHER AS PART OF THIS KIT:

ITEM PART NO. QTY PACKAGING

BIPOD ASSEMBLY, ADJUSTABLE (LIGHTWEIGHT) 13058832 1 REFER TO SPI AM13058832

PIN, SPRING-TUBULAR, COILED, HEAVY DUTY MS39086-205 1 ARDEC DR. 13027484 - (NOTE A)

A) PACKAGE PIN, SPRING-TUBULAR, COILED, HEAVY DUTY (P/N: MS39086-205) INTO BAG IN ACCORDANCE WITH ARDEC DRAWING 13027484 AND SEAL. INTERNAL DIMENSIONS OF THE BAG SHALL BE A MINIMUM OF (3.50” X 3.00”).

B) CONSOLIDATE BOTH ITEMS INTO CONTAINER IN ACCORDANCE WITH ASTM D5118/D5118M, STYLE RSC, GRADE

W5c. INTERNAL DIMENSIONS OF THE CONTAINER SHALL BE (12.50” X 8.00” X 3.50”) FILL VOID SPACE WITH SUFFICIENT CRUMPLED KRAFT PAPER, A-A-203, PPP-C-795, CELLULAR PLASTIC FILM CUSHIONING CLASS 1; OR A- A-3129, OPEN CELL PLASTIC CUSHIONING TYPE II, GRADE A; OR PPP-C-1797, POLYPROPYLENE FOAM CUSHIONING TYPE I TO PREVENT ITEMS FROM SHIFTING DURING TRANSIT. SEAL BOX AS CALLED OUT IN STEP 2

ABOVE.

WSC: HC ITEM SIZE: 11.00 X 5.75 X 2.50 ITEM WEIGHT: 1.34 APPROVED: JEFFREY VAN DERVEER DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages