Attachment_0009_-_SPI-AM13058834_(Leg_Assy,_Upper).pdf

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.

1. PART OR DRAWING NO. NOMENCLATURE 2. CODE INDENT 3. SPI NO.

13058834 LEG ASSEMBLY, UPPER (LIGHTWEIGHT) 19200 AM13058834

4. NATIONAL STOCK NO. 5.DATE OF

DRAWING/SPI(YYMMDD)

6. REVISION / ERR NO.

141210 -/ L14S2042

7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.

FT.)(0.000)

11. UNIT PACK SIZE (INCHES)(00.0)

1/EA 1.0 0.085 12.0 X 3.5 X 3.5

18.

STEPS

19.

REQD

20.

DESCRIPTION

12. MILITARY PRESERVATION 1 1 BAG: MIL-DTL-117, TYPE III, CLASS B

MIL-STD-2073-1, METHOD 31 2 AR CUSHIONING: SEE NOTE A.

13. CLEANING 3 1 BOX: ASTM D5118/D5118M, RSC W5c

* 4 AR CLOSURE: ASTM D1974/D1974M, SEALING

METHOD B14. DRYING

15. PACKING

a. LEVEL A

MIL-STD-2073-1

b. LEVEL B

MIL-STD-2073-1

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREON OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH SPECIFICATION MIL-STD-2073-1 OR

AS OTHERWISE SPECIFIED HEREIN.

TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. INSPECTIONS, QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH APPENDIX G OF MIL-STD-2073-1, OR AS OTHERWISE

SPECIFIED.

* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-

STD-2073-1.

A. FILL VOID SPACE WITH SUFFICIENT CRUMPLED KRAFT PAPER, A-A-203, PPP-C-795, CELLULAR PLASTIC FILM CUSHIONING CLASS 1; OR A-A-3129, OPEN CELL PLASTIC CUSHIONING TYPE II, GRADE A; OR PPP-C-1797, POLYPROPYLENE FOAM CUSHIONING TYPE I TO PREVENT ITEMS FROM SHIFTING DURING TRANSIT.

WSC: HC ITEM SIZE: 10.0 X 0.60 X 0.60 ITEM WEIGHT: 0.09 APPROVED: CHRIS APPLEGATE

DD Form 2169, JUN 97 Previous editions are obsolete Page 1 of 1 Pages chris.d.applegate Typewritten Text DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.