Truck_Side_Guard_Ordinance.pdf
PDF 4 MB Posted
- Attached to
- Mid Size SUV PIU (BPD)
- Solicitation number
- EV00018011
- Issued by
- Suffolk County, Massachusetts
About this file
This is an ordinance document issued by the City of Boston establishing truck side guard safety requirements for vendors contracting with City agencies. The ordinance applies to motor vehicles weighing over 10,000 pounds and semi-trailers exceeding 26,000 pounds, and became effective for all contracts starting on or after May 5, 2015. The ordinance requires vendors to install four specific safety features: side guards (lateral protection devices), convex mirrors, cross-over mirrors, and blind-spot awareness decals. These requirements apply to City of Boston vendors operating within the city limits, with specific exemptions for agricultural trailers, fire engines, and trucks used exclusively for snow removal. Vendors must schedule inspections prior to beginning work, and subcontractors with trucks regularly working on job sites are also subject to inspection and permitting requirements.
Side guards must be rigid, securely mounted devices that do not increase vehicle width, with the lowest edge positioned no more than 21.5 inches above ground and the upper edge no more than 14 inches below the vehicle structure. The convex and cross-over mirrors must provide visibility of objects three feet above ground, while safety decals must be bright yellow and positioned in a minimum of three blind spot locations on the sides and rear of vehicles. Based on U.S. Department of Transportation studies, side guard installation costs average $847, though the City of Boston's pilot program incurred costs of approximately $1,200 per truck. Vendors may utilize alternative safety features such as tool boxes provided they meet all specified measurements. The City offers off-site inspections for larger fleets depending on inspector availability and distance. Approved side guard manufacturers identified in the ordinance include Airflow Deflector, J.C. Madigan Inc., and Susi Auto Body.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Mid_Size_SUV_PIU_(BPD).pdf | ||
| EV00018011_Compliance.pdf | ||
| EV00018011__Terms_and_Conditions.pdf | ||
| EV00018011_Telecomm.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
As the first of its kind in the nation, the Truck Side Guard ordinance championed by Mayor Walsh applies to motor vehicles weighing over 10,000 lbs. and semi-trailers with a total weight exceeding 26,000 lbs. The ordinance requires City agencies to contract only with vendors that have properly installed the following: side guards, convex mirrors, cross-over mirrors, and blind-spot awareness decals. These features are intended to reduce the risk of unprotected road users from falling under the sides of vehicles and getting caught under the rear wheels. The ordinance does not apply to several types of large vehicles, such as agricultural trailers, fire engines, and trucks used exclusively for snow removal.
TRUCK SIDE GUARD ORDINANCE
LATERAL PROTECTION (Side Guards) Device must not increase the width of the vehicle.
Device is rigid and securely mounted.
CONVEX MIRRORS
Objects can be seen down the full length of the vehicle.
Objects can be seen 3’ above the ground.
CROSS-OVER MIRRORS
Objects can be seen 3’ above the ground, from the bumper to where direct vision is possible.
SAFETY DECALS
“Safety yellow” in color or bright.
Minimum of 3 located in vehicle blind spots on side and the rear.
Vehicles designed in a manner that protects against lateral accidents, by virtue of their shape and characteristics, may satisfy the above requirements.
SUMMARY
REQUIREMENTS
COSTS, APPLICATION
Studies by the U.S. Dept. of Transportation have determined the cost of sideguards to be an average of $847. *They are typically installed as a bolt-on addition and can be fixed or hinged.
Mercedes and Volvo have produced side guard models.
*In the City of Boston pilot, each truck was outfitted for $1,200.
Lowest edge of is maximum 21.5” above the ground.
Upper edge is maximum 14” below structure of vehicle.
DIMENSION REQUIREMENTS FOR SIDE GUARDS
TRUCK SIDE GUARD ORDINANCE
max. 21.5” above ground max. 14” below structure of vehicle
SIDE GUARD
12” max.
5” m ax.
SI
D
E
VI
EW
TO
P
VI
EW
Not over 5” inboard of maximum width of vehicle.
Not over 12” from outer part of front and rear tire.
FRONT
SAMPLE OF GUARDS FROM BOSTON’S PILOT
What types of vehicles does this ordinance apply to? This ordinance applies to large vehicles (over 10,000lbs) and semi-trailers used by City of Boston vendors within the City of Boston
Do I need an inspection before I start work on a contract? Yes
When does the ordinance go into effect? All contracts starting on or after May 5, 2015 must comply
Can tool boxes work as guards? Yes, but the tool box must meet all the required measurements in the ordinance
Do subcontractors with trucks regularly working on a job need to be inspected and permitted? Yes
What about deliveries to a job site? The City does not view a subcontractor that simply delivers materials or goods to a job site or to a City Department to be a “Vendor” subject to the ordinance.”
If I typically rent trucks for a job, do those need to be inspected and permitted? Yes
Will the City do an off-site inspection for larger fleets? Yes, depending upon availability of inspectors and distance. Call the number below.
Common Questions
AIRFLOW DEFLECTOR
made by Airflow Deflector www.deflecteurairflow.com/ sideguardprotection
CUSTOM ‘RAIL’ STYLE
made by J.C. Madigan Inc.
www.jcmadigan.com
CUSTOM ‘GRILL’ STYLE
made by Susi Auto Body www.susiautobody.com
Cross Over Mirror
Cross Over Mirrors Help drivers see objects in the front blindspot of large trucks
Photo Credit: NYCDOT
Photo Credit: Jim O’Grady, WNYC
CALL TO SCHEDULE AN INSPECTION
http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com
File details come from the government source that posted it. Updated .