Truck_Side_Guard_Ordinance.pdf
PDF 4 MB Posted
- Attached to
- 4WD DRW Service Truck (PWD)
- Solicitation number
- EV00017991
- Issued by
- Suffolk County, Massachusetts
About this file
This is a truck side guard ordinance document related to Massachusetts' procurement of a 4WD DRW service truck. The document establishes regulatory requirements for side guards on trucks, which directly impacts the specifications for the service vehicle being procured. The ordinance applies to commercial vehicles operating within Massachusetts jurisdictions and specifies mandatory safety equipment installations. The service truck procurement references specification 460855 and allows for approved equal alternatives, indicating that vehicles must comply with the side guard requirements outlined in this ordinance to meet the state's safety standards.
The side guard ordinance establishes minimum safety performance criteria that bidders must address in their vehicle submissions. Any 4WD DRW service truck proposed must either meet the attached specification 460855 exactly or provide documentation demonstrating an approved equal alternative that satisfies the side guard requirements. This regulatory framework ensures that the procured vehicle meets Massachusetts' current safety and environmental standards, which may affect pricing, vehicle selection options, and manufacturer certifications required during the bidding process.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 4WD_DRW_Service_Truck_(PWD).pdf | ||
| EV00017991__Terms_and_Conditions.pdf | ||
| EV00017991_Compliance.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
As the first of its kind in the nation, the Truck Side Guard ordinance championed by Mayor Walsh applies to motor vehicles weighing over 10,000 lbs. and semi-trailers with a total weight exceeding 26,000 lbs. The ordinance requires City agencies to contract only with vendors that have properly installed the following: side guards, convex mirrors, cross-over mirrors, and blind-spot awareness decals. These features are intended to reduce the risk of unprotected road users from falling under the sides of vehicles and getting caught under the rear wheels. The ordinance does not apply to several types of large vehicles, such as agricultural trailers, fire engines, and trucks used exclusively for snow removal.
TRUCK SIDE GUARD ORDINANCE
LATERAL PROTECTION (Side Guards) Device must not increase the width of the vehicle.
Device is rigid and securely mounted.
CONVEX MIRRORS
Objects can be seen down the full length of the vehicle.
Objects can be seen 3’ above the ground.
CROSS-OVER MIRRORS
Objects can be seen 3’ above the ground, from the bumper to where direct vision is possible.
SAFETY DECALS
“Safety yellow” in color or bright.
Minimum of 3 located in vehicle blind spots on side and the rear.
Vehicles designed in a manner that protects against lateral accidents, by virtue of their shape and characteristics, may satisfy the above requirements.
SUMMARY
REQUIREMENTS
COSTS, APPLICATION
Studies by the U.S. Dept. of Transportation have determined the cost of sideguards to be an average of $847. *They are typically installed as a bolt-on addition and can be fixed or hinged.
Mercedes and Volvo have produced side guard models.
*In the City of Boston pilot, each truck was outfitted for $1,200.
Lowest edge of is maximum 21.5” above the ground.
Upper edge is maximum 14” below structure of vehicle.
DIMENSION REQUIREMENTS FOR SIDE GUARDS
TRUCK SIDE GUARD ORDINANCE
max. 21.5” above ground max. 14” below structure of vehicle
SIDE GUARD
12” max.
5” m ax.
SI
D
E
VI
EW
TO
P
VI
EW
Not over 5” inboard of maximum width of vehicle.
Not over 12” from outer part of front and rear tire.
FRONT
SAMPLE OF GUARDS FROM BOSTON’S PILOT
What types of vehicles does this ordinance apply to? This ordinance applies to large vehicles (over 10,000lbs) and semi-trailers used by City of Boston vendors within the City of Boston
Do I need an inspection before I start work on a contract? Yes
When does the ordinance go into effect? All contracts starting on or after May 5, 2015 must comply
Can tool boxes work as guards? Yes, but the tool box must meet all the required measurements in the ordinance
Do subcontractors with trucks regularly working on a job need to be inspected and permitted? Yes
What about deliveries to a job site? The City does not view a subcontractor that simply delivers materials or goods to a job site or to a City Department to be a “Vendor” subject to the ordinance.”
If I typically rent trucks for a job, do those need to be inspected and permitted? Yes
Will the City do an off-site inspection for larger fleets? Yes, depending upon availability of inspectors and distance. Call the number below.
Common Questions
AIRFLOW DEFLECTOR
made by Airflow Deflector www.deflecteurairflow.com/ sideguardprotection
CUSTOM ‘RAIL’ STYLE
made by J.C. Madigan Inc.
www.jcmadigan.com
CUSTOM ‘GRILL’ STYLE
made by Susi Auto Body www.susiautobody.com
Cross Over Mirror
Cross Over Mirrors Help drivers see objects in the front blindspot of large trucks
Photo Credit: NYCDOT
Photo Credit: Jim O’Grady, WNYC
CALL TO SCHEDULE AN INSPECTION
http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com http://www.deflecteurairflow.com/sideguardprotection http://www.jcmadigan.com http://www.susiautobody.com
File details come from the government source that posted it. Updated .