steel procurement~2.docx
DOCX document 13 KB Posted
- Contract number
- 26-426DOC-SHAWN-P-84488
- Issued by
- Illinois
About this file
This document is an excerpt from the SAMS manual detailing the Steel Products Procurement Act, specifically Section 4, which applies to public agencies in Illinois. The act governs the procurement of steel products for public works contracts, establishing guidelines for the use of domestically manufactured steel.
The act mandates that steel products used in public works contracts must be manufactured or produced in the United States, with three key exceptions: contracts under $500, situations where domestic steel is unavailable in sufficient quantities or within required timeframes, and cases where domestic steel would increase contract costs by more than 10%. Public agencies must carefully document and certify any deviations from the domestic steel requirement, ensuring compliance with the act's provisions and maintaining transparency in the procurement process.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 26-426DOC-SHAWN-R-279721 Signed BOA.pdf | ||
| BOA NEW~27.docx | DOCX document | |
| 1 Agency Small Purchase Designation Signed update1~46.pdf | ||
| 3 Notice to Bidders electronic submission~46.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
From the SAMS manual:
Steel Products Procurement Act Section 4 of the Steel Products Procurement Act (30 ILCS, 565/4) provides as follows:
"Each contract for the construction, reconstruction, alteration, repair, improvement or maintenance of public works made by a public agency shall contain a provision that steel products used or supplied in the performance of that contract or any subcontract thereto shall be manufactured or produced in the United States.
The provisions of this Section shall not apply:
(1) Where the contract involves an expenditure of less than $500.
(2) Where the executive head of the public agency certifies in writing that (a) the specified products are not manufactured or produced in the United States in sufficient quantities to meet the agency's requirements or cannot be manufactured or produced in the United States within the necessary time in sufficient quantities to meet the agency's requirements, or (b) obtaining the specified products, manufactured or produced in the United States would increase the cost of the contract by more than 10%.
(3) When its application is not in the public interest.”
Please ensure this is followed in your steel procurements.
File details come from the government source that posted it. Updated .