STAFAC2-41-975 REV -.pdf
PDF 46 KB Posted
- Attached to
- RFQQ 1230896 – IBN & TTM Frame Fabrication
- Solicitation number
- 1230896 KLE
- Issued by
- Washington
About this file
This is a technical drawing specification document from the Applied Physics Laboratory at the University of Washington for an ODI Cable Protector component related to the STAFAC 2 subsystem. The drawing (STAFAC2-41-975, Revision -) provides detailed manufacturing specifications for a plain carbon steel cable protector with a thermoplastic powder coat finish in safety yellow. The component weighs 15 lbs and is drawn at 1:4 scale. The specification includes precise dimensional tolerances, with general tolerances of ±.030 inches for single-place decimals, ±.020 for two-place decimals, and ±.005 for three-place decimals. Additional requirements include a surface finish of 125 micro RA on machined surfaces, machined fillets with a maximum radius of R.015 inches, and removal of all burrs with edges broken to a maximum of .015 inches. The drawing was initially released on 5/11/2026 and received approvals from S. Anderson, C. McGuire, S. Anderson, C. McGuire, C. Murray, and M. Harrington across various engineering roles.
This technical specification document supports the related University of Washington request for quotation (RFQQ 1230896) seeking qualified firms to design, fabricate, test, finish, and deliver 14 structural frames comprising 12 IBN units and 2 TTM units, with a delivery deadline no later than December 15, 2026. The cable protector detailed in this drawing represents one of the component specifications required for the IBN frame fabrication work. No pricing information, set-asides, funding sources, or incumbent contractor details are specified in this technical drawing document.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQQ 1230896 IBN and TTN Frames.pdf | ||
| IBN Frame Drawings Table 2026-06-15.xlsx | XLSX spreadsheet | |
| STAFAC2-41-872 REV -.pdf | ||
| STAFAC2-41-867 REV A.pdf | ||
| UW_WSS_Bidder_Guide.pdf | ||
| RFQQ Notice 1230896.pdf | ||
| STAFAC2-41-907 REV -.pdf | ||
| STAFAC2-41-863 REV -.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2X .55 THRU ALL
2.00
.7
.5
1.
3.
3.
4.
9.
5.00±.03
5.00±.03
2X 45°
2X 45°
2X 2.00
R.250 TYP
.7
1.
3.
0.
.75
1.75
3.17
NOTES:
FINISH: THERMOPLASTIC POWDER COAT 'SAFETY YELLOW'1.
REVISIONS
ZONE REV. DESCRIPTION BY DATE APPROVED
- INITIAL RELEASE S.ANDERSON 5/11/2026 C.MCGUIRE
5/11/2026
5/11/2026
5/11/2026
5/11/2026
5/11/2026
5/11/2026
S.ANDERSON
C.MCGUIRE
S.ANDERSON
C.MCGUIRE
C.MURRAY
M.HARRINGTON
PROJECT:
APL
SOURCE:
98514
CAGE CODETHIRD ANGLE PROJECTION
- APPLICABLE STANDARDS: ASME
Y14.100
- INTERPRET GEOMETRIC
TOLERANCING PER: ASME Y14.5
- SURFACE FINISH: 125 MICRO RA
- MACHINED FILLETS: R.015 MAX
- REMOVE ALL BURRS, BREAK
EDGES .015 MAX
1013 NE 40TH ST. SEATTLE, WA. 98105
APPLIED PHYSICS LABORATORY
UNIVERSITY OF WASHINGTON
DRAWN
DIMENSIONS ARE IN INCHES.
TOLERANCES:
MATERIAL:
CHIEF ENG.
SYS ENG.
LEAD ENG
DES ENG
CHECKED
DATEAPPROVALS
TITLE:
SIZE
B
DWG. NO. REV
WEIGHT: 15 LBSCALE: 1:4
UNLESS OTHERWISE SPECIFIED:
SHEET 1 OF 1
STAFAC2-41-975
ODI CABLE PROTECTOR
IBN
Plain Carbon Steel
.030
.020
.005
.X ±
.XX ±
.XXX ±
ANGLES ±
APL NO. 97946
TUC INLINE BREAKOUTSUBSYSTEM:
STAFAC 2
A A
B B
C C
D D
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
| Drawing View3 |
| Drawing View5 |
File details come from the government source that posted it. Updated .