SPI Document_EH66E236EH.pdf
PDF 2 MB Posted
- Attached to
- Miscellaneous Vehicular Components Federal contract opportunity
- Solicitation number
- SPRDL117R0108
About this file
SPI Document
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPI Document_EH66E228EH.pdf | ||
| SPI Document_EH66E232EH.pdf | ||
| SPI Document_EH66E234EH.pdf | ||
| SPI Document_EH66E235EH.pdf | ||
| SPI Document_EH66E140EH.pdf | ||
| SPRDL117R0108.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 5 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
(CAGE) NOMENCLATURE
PE20696 (K0824) DEPLOYMENT FRAME 19207 AK94090144
2510-99-409-0144 4/18/2014 -
(LB.) (CU. FT.) (INCHES)
1 EACH NONE 627.0 44.559 56.3 X 34.8 X 39.3
18.
STEPS
19.
REQD
20.
MIL-STD-2073-1D, METHOD 53
1-B A/R PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1D 2-C A/R PRESEVATIVE: MIL-PRF-16173, GR 4
14. DRYING 3-D A/R CAPS/PLUGS: NAS-847
MIL-STD-2073-1D 4-E A/R ITEM PREPERATION
5-F 1 WRAP: MIL-PRF-121, TY II, SIZE: 36 X 144
6-G 4 1/2" X 8" HARDWARE SET
7-H 4 BLOCKING/BRACING: A-A-55057, TY A,
SIZE: 6 X 22 X 3/4" THICKNESS (A)
MIL-STD-2073-1D & NOTE P 8-I 2 BLOCKING/BRACING: ASTM-D6199,
SIZE: 2 X 6 X 34-3/4 (B)
NOT APPLICABLE 9-J 2 CUSHIONING: A-A59136, CL 1, GR A,
16. MARKING SIZE: 7 X 23 X 2" THICKNESS, 2.0# DENSITY (C)
MIL-STD-129 & NOTE O 10-K 48 DESICCANT: MIL-D-3464, TY II
11-L 3 CUSHIONING: A-A-59135, CL 1, GR A, SIZES:
2PCS 6 X 9 X 1/4" THICKNESS &
1PC 36 X 144 X 1/4" THICKNESS
12-M 1 BAG: MIL-DTL-6060E, SIZE: 96 X 112 (FLAT LAYOUT)
13-N 1 CONTAINER: ASTM-D7478, TY II, CL 2, ST A,
SIZE: 32-1/2 X 54 X 32
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FILL UNIT WITH OPERATIONAL FLUID.
C. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.
D. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
E. SECURE UPPER FRAME ASSEMBLY AND LOWER FRAME ASSEMBLY TOGETHER USING STRAPPING IN
CONFORMANCE WITH ASTM-D3953 AS PICTURED ON PAGE 2.
F. WRAP UNIT IN PAPER, SECURE WITH TAPE ASTM-D6123.
G. EACH HARDWARE SET CONSISTS OF THE FOLLOWING: 1PC 1/2" X 8" CARRIAGE BOLT, 1PC 1/2" FLAT
WASHER, 1PC 1/2" LOCK WASHER AND 1PC 1/2" NUT.
MOUNTING HARDWARE SHALL BE COMMERCIAL GRADE. ALL HARDWARE SHALL BE PAINTED, PLATED
OR PRESERVED WITH MIL-PRF-16173, GRADE 4.
H. PLYWOOD SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED. SEE PAGE 3 FOR HOLE DIMENSIONS
AND ORIENTATION.
I. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SEE PAGE 3 FOR HOLE DIMENSIONS
AND ORIENTATION.
PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 5
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -AI
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
. (CAGE) NOMENCLATURE 3. SPI NO.
PE20696 (K0824) DEPLOYMENT FRAME 19207 AK94090144
2510-99-409-0144 4/18/2014 -
J. SEE PAGE 3 FOR HOLE DIMENSIONS AND ORIENTATION.
K. PLACE DESICCANT IN OPEN VOID.
L. APPLY 36 X 144 X 1/4" CUSHIONING AROUND THE UNIT TO PREVENT PUNCTURING THE FOIL
ENVELOPE MATERIAL, SECURE WITH TAPE ASTM-D6123. APPLY 6 X 9 X 1/4" CUSHIONING AS
PICTURED ON PAGE 2.
M. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060. MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104. GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BAG AT THE MOUNTING LOCATION USING MMM-A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A SUFFICIENT QUNATITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE AN AIRTIGHT
SEAL.
N. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION (ASTM-D7478).
O. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND SIDES WITH MINIMUM 1/2 INCH HIGH BLACK LETTERS "REUSABLE CONTAINER, DO NOT DESTROY". IN
ADDITION, THE TOP AND ENDS SHALL BE MARKED "REMOVE LAG SCREWS TO OPEN CONTAINER"
USING 1/2 INCH HIGH BLACK LETTERS.
P. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
USE CORRUGATED CUSHIONING CONFORMING TO ASTM-D4727, TY CF, CL D, GR 200, VR SW, SIZE: 3 X 96, AS
SHOWN ABOVE.
NOTE: DO NOT OVER- OT BE FULLY
COMPRESSED.
RUBBER
CUSHIONING PADS
6 X 9 X 1/4"
CUSHIONING
PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 5
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
. (CAGE) NOMENCLATURE 3. SPI NO.
C
1/2 X 8"
HARDWARE SET
ALL HOLES
PICTURED ARE 1/2"
DIAMETER
PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 5
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
. (CAGE) NOMENCLATURE 3. SPI NO.
CRATE BASE HOLE
LOCATIONS
ENVELOPE (FLAT LAYOUT)
HOLE LOCATIONS
PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 5
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
. (CAGE) NOMENCLATURE 3. SPI NO.
1/2 X 8"
HARDWARE SET
4 PLACES
File details come from the government source that posted it. Updated .