SPI Document_EH66E235EH.pdf
PDF 41 KB Posted
- Attached to
- Miscellaneous Vehicular Components Federal contract opportunity
- Solicitation number
- SPRDL117R0108
About this file
SPI Document
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPI Document_EH66E140EH.pdf | ||
| SPI Document_EH66E228EH.pdf | ||
| SPI Document_EH66E232EH.pdf | ||
| SPI Document_EH66E236EH.pdf | ||
| SPI Document_EH66E234EH.pdf | ||
| SPRDL117R0108.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-AI
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
(CAGE) NOMENCLATURE
CS2240 (K0824) ELECTRONIC COMPONENT ASSEMBLY 19207 AK91846182
5998-99-184-6182 11/27/2013
(LB.) (CU. FT.) (INCHES)
1 EACH SEE NOTE F 2.7 0.167 9.4 X 6.4 X 4.8
18.
STEPS
19.
REQD
20.
MIL-STD-2073-1D, METHOD 41
1-B A/R CAPS/PLUGS: NAS-847
MIL-STD-2073-1D 2-C 1 CUSHIONING: A-A-59135, CL 1, GR B,
14. DRYING SIZE: 12 X 24 X 1/4" THICKNESS
MIL-STD-2073-1D 3-D 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 10 X 12
4-E 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,
GR W5c, VR SW, SIZE: 9 X 6 X 4
MIL-STD-2073-1D & NOTE G
MIL-STD-2073-1D & NOTE G
16. MARKING
MIL-STD-129
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.
C. DOUBLE WRAP ITEM IN FOAM, SECURE WITH TAPE ASTM-D6123.
D. CLOSE BAG BY HEAT SEALING.
E. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
F. INTERMEDIATE PACK SHALL CONSIST OF 008 UNIT PACKS. CONTAINER ASTM-D5118, CL WR. CLOSURE
SHALL BE IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
G. PACKING:
LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D
6880, CLASS 2.
LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,
CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,
CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.
WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,
EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.
File details come from the government source that posted it. Updated .