SPI Document_EH66E232EH.pdf

PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

(CAGE) NOMENCLATURE

CS1997 (K0824) ELECTRONIC COMPONENT ASSEMBLY 19207 AK94853369

5998-99-485-3369 11/27/2013

(LB.) (CU. FT.) (INCHES)

1 EACH NONE 14.5 0.998 17.9 X 13.2 X 7.3

18.

STEPS

19.

REQD

20.

MIL-STD-2073-1D, METHOD 42

1-B A/R CAPS/PLUGS: NAS-847

MIL-STD-2073-1D 2-C 1 BAG: MIL-DTL-117, TY III, CL B, ST 2, SIZE: 16 X 20

14. DRYING 3-D 8 CUSHIONING: A-A-59136, CL 1, GR A,

MIL-STD-2073-1D 2.0# DENSITY

4-E 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D,

GR 275, VR SW, SIZE: 16-1/2 X 12 X 5-1/2

5-F 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 22 X 32

MIL-STD-2073-1D & NOTE H 6-G 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,

GR W5c, VR SW, SIZE: 12-3/4 X 6-1/2 X 17-1/2

MIL-STD-2073-1D & NOTE H

16. MARKING

MIL-STD-129

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.

C. PLACE ITEM IN BAG, CLOSE BY HEAT SEAL OR TAPE.

D. SEE PAGES 2 AND 3 FOR SIZES AND ORIENTATION.

E. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

F. CLOSE BAG BY HEAT SEAL.

G. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

H. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

. (CAGE) NOMENCLATURE 3. SPI NO.

CS1997 (K0824) ELECTRONIC COMPONENT ASSEMBLY 19207 AK94853369

5998-99-485-3369 11/27/2013

FOAM CUSHIONING

ITEM SIZE QTY REFERENCE

A 3 X 16-1/2 X 1" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 3-3/4 X 16-1/2 X 1" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 5-1/4 X 5-1/2 X 2" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

D 3-1/2 X 16-1/2 X 1" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

STEP 1 - PLACE 1PC ITEM A AND 1PC ITEM B INTO DOMESTIC CARTON AS SHOWN BELOW

STEP 2 - PLACE BAGGED ITEM AS SHOWN BELOW

PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

. (CAGE) NOMENCLATURE 3. SPI NO.

CS1997 (K0824) ELECTRONIC COMPONENT ASSEMBLY 19207 AK94853369

5998-99-485-3369 11/27/2013

STEP 3 - PLACE 2PCS ITEM C AND 2PCS ITEM D AS SHOWN BELOW

STEP 4 - PLACE 1PC ITEM A AND 1PC ITEM B AS SHOWN BELOW