SPI-F012717161.pdf
PDF 404 KB Posted
- Attached to
- F15/F16 Initiators Federal contract opportunity
- Solicitation number
- FA821321R3003
About this file
This document provides packaging and shipping requirements for munitions and initiators. It specifies that all wood packaging material must be heat treated and marked in accordance with International Standards for Phytosanitary Measures. Pallets, boxes, and containers must be constructed from debarked wood and heat treated to a minimum of 56 degrees Celsius for 30 minutes. Certification from an accredited agency is required. Relatedly, solicitation FA821321R3003 from the Department of the Air Force Materiel Command seeks initiators for the F-15 and F-16 aircraft. Further details on product requirements are provided in attached documents.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821321R3003 001.pdf | ||
| FA821321R3003.pdf | ||
| EDL-Combined.pdf | ||
| SOW_SPI.pdf | ||
| Item_Description-combined.pdf | ||
| 807-Combined-Update.pdf | ||
| TransInstruction4.pdf | ||
| JHCS-Combined.pdf | ||
| QALI_F-16_Initiators_and_TDs.pdf | ||
| ADC_SOW.pdf | ||
| FA821321R3003.pdf | ||
| CDRL.pdf | ||
| Bid_Sets_21-50089.pdf | ||
| AIR_SPEC-50089-50090.pdf | ||
| SPI-F011676621.pdf | ||
| Bid_Sets_20-50090.pdf | ||
| CADPAD_Item_Marking_Instruction.pdf | ||
| SOW.pdf | ||
| REPSHIP.pdf |
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
NOTE: THE ABOVE POP MARKINGS
ARE FOR DOD USE ONLY.
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 20 DECEMBER 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING
DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
MUNITION NOTICES
NOTES
1. WRAP ITEM IN REF.-3 AND PLACE IN BARRIER BAG, REF.-2. REMOVE AIR AND SEAL.
2. CUSHION BAG WITH REF.-1 TO PREVENT BAGGED ITEM FROM CONTACTING BOX AND PREVENT MOVEMENT.
3. MAY PLACE UP TO 20 BAGGED ITEMS IN SHIPPING CONTAINER.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
REFER TO MIL-STD-129 FOR MARKING
REQUIREMENTS OF PALLETIZED UNIT
LOADS OF AMMUNITION.
File details come from the government source that posted it. Updated .