807-Combined-Update.pdf
PDF 171 KB Posted
- Attached to
- F15/F16 Initiators Federal contract opportunity
- Solicitation number
- FA821321R3003
About this file
This collection of documents includes recommended quality assurance provisions and special inspection requirements forms for various munitions items procured by the Department of the Air Force Materiel Command Lifecycle Management Center. The forms cover initiators, delays, and other explosive components used in aircraft munitions, precision guided weapons, and ejection seats. They specify source inspection requirements due to safety and quality concerns with explosive materials. The technical authority has determined that inspection at the contractor's source facility is necessary to reduce risks associated with defective explosives reaching end-users, with potential severe safety consequences. The provisions reference FAR clauses for quality standards, certifications, and higher-level quality requirements including ISO 9001 and AS9100 that contractors must meet.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| FA821321R3003 001.pdf | ||
| FA821321R3003.pdf | ||
| EDL-Combined.pdf | ||
| SOW_SPI.pdf | ||
| Item_Description-combined.pdf | ||
| TransInstruction4.pdf | ||
| JHCS-Combined.pdf | ||
| QALI_F-16_Initiators_and_TDs.pdf | ||
| ADC_SOW.pdf | ||
| FA821321R3003.pdf | ||
| CDRL.pdf | ||
| Bid_Sets_21-50089.pdf | ||
| AIR_SPEC-50089-50090.pdf | ||
| SPI-F011676621.pdf | ||
| Bid_Sets_20-50090.pdf | ||
| CADPAD_Item_Marking_Instruction.pdf | ||
| SPI-F012717161.pdf | ||
| SOW.pdf | ||
| REPSHIP.pdf |
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RECOMMENDED QUALITY ASSURANCE PROVISIONS
AND SPECIAL INSPECTION REQUIREMENTS
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377012620521ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
McCormick, Kenneth GNAME: 02 FEB 2017DATE:
Noun: 6064200 P/N: Initiator, Gas to SMDC
NHA: F-15 A/B/C/D/E
T.O.: 11P3-3-16-7
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
04 JUN 2020
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 7Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377012031961ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
McCormick, Kenneth GNAME: 02 FEB 2017DATE:
Noun: Initiator, Gas to SMDC P/N: 2293200-1
NHA: F-15 A/B/C/D/E
T.O.: 11P3-3-16-7
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 1 of 1AFMC FORM 807, 20060111, V1 Version 7Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377010732190ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 1220-1 Sys: F16 Aircraft T.O. 11P3-2-15-7
Parkin, Jacob JNAME: 14 MAR 2014DATE:
GHER LEVEL CONTRACT QUALITY REQUIREMENTS
FAR 52.246-11
ISO 9001:2000
AS 9100
NATO AQAP 2070 (OR EQUIVALENT)
Higher Level Contract Quality Requirements: FAR 52.246-11, ISO 9001:2000, AS 9100, NATO AQAP2070 (or equivalent).
SOURCE INSPECTION REQUIREMENTS
PROCUREMENT LESS THAN $250,000
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377010732190ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377013462220ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 6101100-05 Sys: F16 Aircraft T.O. 11P3-2-15-7
Parkin, Jacob JNAME: 16 JUN 2014DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Noun: Rocket Motor Canopy Remover Part Number: P/N 6101100-05 Sys: F-16 Aircraft T.O. 11P3-2-15-7
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 4Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377013462220ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 4Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377013462221ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Parkin, Jacob J / 801-777-4388
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
McCormick, Kenneth GNAME: 22 SEP 2016DATE:
Noun: Initiator, Delay, 0.4 Sec P/N: 6101100-06
NHA: F-16 B/D
T.O.: 11P3-2-15-7
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 6101100-06 Sys: F16 Aircraft T.O. 11P3-2-15-7
Parkin, Jacob JNAME: 16 JUN 2014DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Noun: Rocket Motor Canopy Remover Part Number: P/N 6101100-06 Sys: F-16 Aircraft T.O. 11P3-2-15-7
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 5Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377013462221ES
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection is made to a new source using Acquisition Method Code (AMC) 3, 4, or 5.
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 5Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377010542911ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 2651100 Sys: F16 Aircraft T.O. 11P3-3-20-7
Parkin, Jacob JNAME: 14 MAR 2014DATE:
GHER LEVEL CONTRACT QUALITY REQUIREMENTS
FAR 52.246-11
ISO 9001:2000
AS 9100
NATO AQAP 2070 (OR EQUIVALENT)
Higher Level Contract Quality Requirements: FAR 52.246-11, ISO 9001:2000, AS 9100, NATO AQAP2070 (or equivalent).
SOURCE INSPECTION REQUIREMENTS
PROCUREMENT LESS THAN $250,000
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377010542911ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377010542912ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
WIlson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 17 APR 2020DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2015 Noun: Initiator Part Number: P/N 2650100 Sys: F16 Aircraft T.O. 11P3-2-16-7
Parkin, Jacob JNAME: 14 MAR 2014DATE:
GHER LEVEL CONTRACT QUALITY REQUIREMENTS
FAR 52.246-11
ISO 9001:2000
AS 9100
NATO AQAP 2070 (OR EQUIVALENT)
Higher Level Contract Quality Requirements: FAR 52.246-11, ISO 9001:2000, AS 9100, NATO AQAP2070 (or equivalent).
SOURCE INSPECTION REQUIREMENTS
PROCUREMENT LESS THAN $250,000
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 5Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377010542912ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 5Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377012717161ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 6073100 Sys: F16 Aircraft T.O. 11P3-3-20-7
Parkin, Jacob JNAME: 16 JUN 2014DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Noun: Rocket Motor Canopy Remover Part Number: P/N 2651100 Sys: F-16 Aircraft T.O. 11P3-3-20-7
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377012717161ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377011028963ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Parkin, Jacob J / 801-777-4388
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator, Delay Part Number: P/N 1256-1 Sys: F16 Aircraft T.O. 11P3-2-15-7
Parkin, Jacob JNAME: 16 JUN 2014DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Noun: Rocket Motor Canopy Remover Part Number: P/N 1256-1 Sys: F-16 Aircraft T.O. 11P3-2-15-7
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 4Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377011028963ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 4Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377012579467ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 6074100 Sys: F16 Aircraft T.O. 11P3-2-16-7
Parkin, Jacob JNAME: 16 JUN 2014DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Noun: Rocket Motor Canopy Remover Part Number: P/N 6074100 Sys: F-16 Aircraft T.O. 11P3-3-20-7
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377012579467ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377011022219ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 1255-1 Sys: F16 Aircraft T.O. 11P3-2-15-7
Parkin, Jacob JNAME: 14 MAR 2014DATE:
GHER LEVEL CONTRACT QUALITY REQUIREMENTS
FAR 52.246-11
ISO 9001:2000
AS 9100
NATO AQAP 2070 (OR EQUIVALENT)
Higher Level Contract Quality Requirements: FAR 52.246-11, ISO 9001:2000, AS 9100, NATO AQAP2070 (or equivalent).
SOURCE INSPECTION REQUIREMENTS
PROCUREMENT LESS THAN $250,000
In accordance with AFMCI 23-102, paragraph 14.2.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or improperly marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of personnel involved in the handling and use of the items. Airmunitions contracts (under $250K) are primarily for delivery of explosive components used in ammunition, precision guided weapons and the ejection seats of combat aircraft. The lives of transportation and combat personnel are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
8a. OZONE DEPLETING SUBSTANCES (ODS)
X STATEMENT
"I HAVE REVIEWED THE REQUIREMENT, INCLUDING AVAILABLE TECHNICAL DOCUMENTATION, AND BELIEVE THAT IT DOES NOT REQUIRE THE CONTRACTOR USE CLASS I OZONE DEPLETING SUBSTANCES (ODS) IDENTIFIED IN AIR FORCE POLICY, NOR IS IT WRITTEN SO THAT IT CAN
ONLY BE MET BY THE USE OF A CLASS I ODS."
WAIVER (SEE AF FARS 5323)
NOTE: Quality provisions as annotated hereon will not be downgraded without Technical Authority coordination. The Technical Authority must be notified if award selection
Page 1 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377011022219ES
9. QUALITY PRE-AWARD SURVEY
YES NEW SOURCE
X PREVIOUS SOURCEX NO
AFMC PARTICIPATION
RECOMMENDED
10. CODES
A. I&A
B. CQR
G
11. SIGNATURE OF TECHNICAL AUTHORITY
Tidwell, Quinn R
ORGANIZATION / SYMBOL
AFLCMC / EBHJ
PHONE
801-777-4136 / 777-4136
DATE
Page 2 of 2AFMC FORM 807, 20060111, V1 Version 3Generated by PRPS using Jasper Reports on 20 Jul 2020
1. PR / MIPR NUMBER
2. NATIONAL STOCK NUMBER
1377013462219ES
3. POINT OF INSPECTION
SOURCE DESTINATION
X
SEE DFARS 246.402
4. POINT OF ACCEPTANCE
SOURCE DESTINATION
X
5. ITEM MANAGER / PHONE
Gosnell, Shari L / 801-777-4646
6. EQUIPMENT SPEC / PHONE
Wilson, Kenneth L / 801-586-9087
7. CONTRACT QUALITY REQUIREMENTS/SPECIAL INSPECTION REQUIREMENTS
CERTIFICATE OF CONFORMANCE
FAR 52.246-15
CONTRACT RESPONSIBILITY
FOR INSPECTION
FAR 52.246-1
STANDARD INSPECTION
FAR 52.246-2,-3,-4,-5 OR -6
AS APPLICABLE TO CONTRACT
X HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
ISO 9001:2000
COMMERCIAL ITEM INSPECTION
FAR 52.212-4
OTHER (Describe in Block 8)
8. REMARKS
Parkin, Jacob JNAME: 02 MAY 2016DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Current ISO is 9001:2008 Noun: Initiator Part Number: P/N 6101100-04 Sys: F16 Aircraft T.O. 11P3-2-15-7
Parkin, Jacob JNAME: 16 JUN 2014DATE:
SOURCE INSPECTION REQUIREMENTS
In accordance with AFMCI 23-102, paragraph 14.1, the chief engineer has determined source inspection is required for airmunitions procurements. The following statements, submitted by the chief engineer in accordance with FAR 46.402(f), provide further support for source inspection of munitions items: Quality assurance inspection of explosives and munitions items must be completed at the source to reduce the risk of defective or mis-marked explosives reaching the end-user. The safety consequences of a single defective explosive or improperly marked explosive reaching the end-user are very severe. Customers of typical industrial commodities may be able to tolerate a percent defective of 1% - 3%. In the case of explosives procurement, this percent defective may result in the maiming or death of several people. Many airmunitions contracts are for delivery of explosive components used in the ejection seats of combat aircraft. The lives of combat pilots are directly related to the successful performance these items. Thus, to ensure explosives safety and quality, source inspection is required for this airmunition procurement.
Noun: Rocket Motor Canopy Remover Part Number: P/N 6101100-04 Sys: F-16 Aircraft T.O. 11P3-2-15-7
8a. OZONE…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .