SP_Tennis_Rehab_2025_Addendum_1.pdf
PDF 3 MB Posted
- Attached to
- Schenley Park Tennis Courts Upgrades
- Solicitation number
- 2025-IFB-236
- Issued by
- Allegheny County, Philadelphia City, Pennsylvania
About this file
This is an Addendum to the Scope of Work for the Schenley Park Tennis Courts Rehabilitation project prepared by the City of Pittsburgh Department of Public Works. The project encompasses the resurfacing and upgrades to tennis courts 7-12 at Schenley Park, located at 1 Overlook Drive, Pittsburgh, PA 15217, with project number 2025-88506. The base bid scope includes removal and storage of fencing, sawcutting along three sides of the courts to preserve asphalt beneath the fence line, demolition of existing asphalt and removal of benches and storm catch basins, excavation of three trenches for perforated drainage pipes, subbase repair and replacement as needed, asphalt repaving, installation of six tennis post sets and nets (Edwards 3" posts and 30LS 42' nets), and resurfacing and striping of courts in two colors per the existing layout. The project document specifies that SportMaster Sport Surfaces products in light green and light blue should be used, with reference to Washington's Landing tennis and pickleball courts as an example. The addendum includes multiple add-alternates, including deletion of Add-alt 1, installation of player benches (Add-alt 2), city standard benches (Add-alt 3), conversion of Court 7 into four pickleball courts with appropriate fencing and equipment (Add-alt 4), removal and repair of an existing water fountain (Add-alt 5), installation of trash and recycling receptacles (Add-alt 6), and furnishing tennis nets (Add-alt 7).
The document contains detailed construction specifications and details for asphalt paving, concrete bench pads, bench assembly, and trash receptacle installations, with specific material requirements including AASHTO stone bases, PennDOT Superpave asphalt courses, and geotextile stabilization fabric. All trees on site must be protected to the edge of the dripline or to a radius of one foot per inch of tree diameter, with the contractor held liable for any damage. The contractor is responsible for hauling and disposing of all stripped and unusable materials, repairing any damages to existing courts and park features, and reseeding all disturbed areas with maintenance until grass is fully established. The project revision date is November 14, 2025. Pricing information, contract award dates, response deadlines, and specific bid amounts are not included in this addendum document.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Department of Public Works
NORTH
SC
H
EN
LE
Y
PA
R K
TE
N
N
IS
C O
U R
TS
O ve rlo ok D riv e, P itt sb ur gh , P
A
2025-88506
City of Pittsburgh
NTS
7/31/2025
SCOPE OF
WORK
L-1 1 4
BASE BID SCOPE OF WORK
COURTS 7 - 12:
1. Remove and store fencing as needed to allow machinery access to courts, and reinstall after completion.
2. Saw cut along the perimeter of three sides (North, East, and West) approx. 8" off the fence line. This will allow the existing asphalt to remain in place beneath the fencing. The new asphalt will tie into the existing asphalt, allowing the fence to remain undisturbed.
3. Demolish existing asphalt. Including the removal and disposal of the exisiting benches and the 3 existing storm catch basins along the southside area of the courts.
4. Excavate three (3) 18" wide x 18" deep trenches for 4" perforated pipe. Backfill trenches with AASHTO #2B stone. Run each trench and pipe from the north (top) end of the court to the south (bottom) end (approx. 120' length). Connect all pipes to existing storm basins, including frame and grate assembly.
5. Repair / replace subbase as needed, per detail.
6. Repave asphalt per detail.
7. Furnish and install set of tennis posts (6) Edwards 3" and nets (6)
Edwards 30LS 42' long, per detail.
8. Resurface (2 colors) and stripe tennis courts per existing layout.
ADD ALTERNATES
COURTS 7 -12:
Add-alt 1: DELETED.
Add-alt 2: Furnish and install city player benches (6) per detail.
Add-alt 3: Furnish and install city standard benches (2) per detail.
COURT 7:
Add-alt 4: Convert one existing tennis court into 4 pickleball courts, including resurfacing, stripping, posts, nets, and fencing. Bench and gate layout may need to be modified if chosen. Furnish and install tennis posts. Use Douglas Premier RD-36 Pickleball / QuickStart Tennis Posts and Douglas nets or approved equals.
Add-alt 5: Remove and dispose of the existing water fountain. Repair the surrounding concrete pads (four pads, 5' x 7' each). Please note that this water fountain is no longer connected to the water line.
Add-alt 6: Furnish and install SD-42 pair of trash receptacles (Black & Blue). Include the Dom Top Lid for recycle receptacle per attachment.
Location TBD per Project Manager.
NOTES:
Repave and resurface color coating on all tennis courts per existing layout.
Use SportMaster Sport Surfaces products in light green and light blue. See Washington's Landing tennis / pickleball courts for example.
All trees on site MUST BE PROTECTED. Contractor will be liable for any damages to trees (tree protection should be installed to the edge of the dripline of the tree.
If that can't be maintained, the next fallback position is a radius equal to 1 foot for every inch in tree diameter).
Contractor to haul and dispose of all stripped and unusable materials.
Contractor to repair any damages to existing courts, walkways, or other park features that may occur during construction.
Contractor shall reseed all disturbed areas and provide maintenance until the grass is fully established
AutoCAD SHX Text Revision 1: 11/14/25
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Date
AutoCAD SHX Text Scale
AutoCAD SHX Text Sheet No.
AutoCAD SHX Text of
10'
5'
5'
8'
8'
8'
8'
300'
36' 36' 36' 36' 36' 36' 12'12' 12'12' 12' 12' 12'
120'78'
Department of Public Works
SC
H
EN
LE
Y
PA
R K
TE
N
N
IS
C O
U R
TS
O ve rlo ok D riv e, P itt sb ur gh , P
A
2025-88506
City of Pittsburgh
NTS
7/31/2025
COURT
DETAILS
L-2 2 4
COURTS 7-12 BENCH PAD LOCATIONS:
6 player bench pads within the courts to be located as shown, in between courts 1&2, 3&4, 5&6 on both sides, and at the middle of the courts on both ends 8" x 2.5"
COURTS 7 - 12:
Add-alt 7: Furnish and install tennis Nets. Edwards 30LS 42Ft long.
COURT 7:
Add-alt 4: Convert one existing tennis court into 4 pickleball courts, including resurfacing, stripping, posts, nets, and fencing.
Bench and gate layout may need to be modified if chosen.
Furnish and install tennis posts. Use Douglas Premier RD-36 Pickleball / QuickStart Tennis Posts and Douglas nets or approved equals.
Pickleball Standard 30' x 60'
INSTALL NEW FENCE
TO DIVIDE PICKLEBALL
FROM TENNIS. APPROX.
106' LENGTH. 6' HEIGHT.
A 7' SPACE IN EACH
CORNER
INSTALL NEW FENCE
TO DIVIDE PICKLEBALL
COURTS. APPROX.
50' LENGHT. 6' HEIGHT
STORM CATCH BASINS.
APPROX. LOCATION
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Date
AutoCAD SHX Text Scale
AutoCAD SHX Text Sheet No.
AutoCAD SHX Text of
Revision 1: 11/14/25
4" DEPTH CONCRETE
WITH BROOM FINISH
WELDED WIRE MESH
4" AGGREGATE
SUBBASE
COMPACTACTED
SUBGRADE
CONCRETE PAVING - 4"
N.T.S.
EXPANSION &
SCORING JOINT
5' SPACING
ATTACH BENCH TO
CONCRETE WITH 12" DIA. X
4" LONG ANCHOR BOLTS,
TYP. PAINT BOLT HEAD
TO MATCH BENCH
ADJACENT
SURFACE
CONCRETE PAVING,
BROOM FINISH.
COMPACTED
SUBGRADE
CONCRETE BENCH PAD
N.T.S.
6' TYP. 2.5' TYP.
CD-1
CD-1
FRONT
BACK
2'-9"
2"
1'-95 8"
Fasteners for standard assembly
Size Type 6' Bench
4-20 x 5 8" Button Socket Cap Screw 3
4-20 x7
8" Button Socket Cap Screw 12
4-20 12" Sex Bolts 9
4-20 x1" Sex Bolts 6
4-20 x1 12" Black Oxide Carrage Bolts 27
4-20 Acorn Nuts 27
16" Flat washers 27
4-20 x 1" Black Oxide Rnd head machine screw & nut 2
4-20 x 1" Hex Head bolt 1
4"
5'-117 8"
NOTES:
1. INCLUDED: (1) 3 34" X 1 14"X 72" AND (7) 2 12" X 1 14" X 72" WOODEN SLATS.
2. SLATS TO BE CLEAR WHITE OAK WITH BEVELED EDGES. WOOD FINISH: NONE
3. FRONT SLAT TO HAVE RADIUS AT FRONT EDGE AND BEVELED REAR EDGE.
4. SLATS TO BE CLEAR OF KNOTS AND DISFIGURATIONS AND UNSIGHTLY BLEMISHES, COMPLETELY SANDED.
6. SPACE HARDWARE HOLES FOR SEAT SLATS TO ALLOW FOR APPROPRIATE DRAINAGE.
8. METAL PRIMER: SHERWIN WILLIAMS, KEM BOND HS, RED OXIDE, B50 NZ 3, 630-4521
9. METAL FINISH: JANOVIC GLOSS ALKYD, DIAMOND-LIKEÔ HIGH PERFORMANCE ENAMEL, GLOSS BLACK 9764 (POLYURETHANE EPOXY).
10. BENCHES MANUFACTURED BY ARCHITECTURAL IRON COMPANY OR APPROVED EQUAL
11"11 2"
2"
8"
8"
2"
1"
SIDE Elevation (from Left-hand side)
1'-93 8"21
8" 1'-8"
ALT. # 3 - CITY OF PITTSBURGH 6' BENCH
N.T.S.
CD-1
STRIP EXISTING LAYER(S)
OF BITUMINOUS PAVING
(Approx. 4").
EXISTING SUBBASE TO
EXCAVATE (7"-9" SLAG).
EXISTING SUBGRADE
EXISTING SURFACE
CD-1
STRIPPING AND RESURFACING BITUMINOUS TENNIS COURT
N.T.S.
UNDISTURBED
SUBGRADE.
PROPOSED SURFACE
5" - 6" MIN. AASHTO #1 STONE BASE COURSE (FIST SIZE).
FOR SUBBASE STABILIZATION. STONE SHALL BE CLEAN,
CRUSHED, AND FREE OF FINES. PLACE AND LEVEL TO UNIFORM
THICKNESS AS REQUIRED TO ACHIEVE DESIGN GRADES AND
PROVIDE DRAINAGE. ROLL OR COMPACT AS FIELD CONDITIONS
REQUIRE TO PROVIDE A STABLE BASE PRIOR TO PLACEMENT
OF OVERLYING MATERIALS.
3" - 4" MIN. PENNDOT 2A STONE – COMPACTED THOROUGHLY
TO PROVIDE STABLE, LEVEL SURFACE.
1-1/2" MIN. WEARING COURSE, PENNDOT SUPERPAVE 9.5mm OR
APPROVED EQUAL.
THIN LAYER OF AASHTO #10 AGGREGATE (LIMESTONE DUST)
SPRINKLE IN TO FILL SURFACE VOIDS AND CREATE A SMOOTH,
COMPACTED FINISH.
2" - 2-1/2" MIN. LEVELING / BINDER COURSE, PENNDOT
SUPERPAVE 19mm OR APPROVED EQUAL.
GEOTEXTILE
STABILIZATION
FABRIC.
TOP COAT. SPORT COURT COLOR COATING SYSTEM OR
EQUIVALENT PRODUCT THAT MEET SAME SPECIFICATIONS
Department of Public Works
SC
H
EN
LE
Y
PA
R K
TE
N
N
IS
C O
U R
TS
O ve rlo ok D riv e, P itt sb ur gh , P
A
2025-88506
City of Pittsburgh
NTS
7/31/2025
CONSTRUCTION
DETAILS
CD-1
3 4
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Date
AutoCAD SHX Text Scale
AutoCAD SHX Text Sheet No.
AutoCAD SHX Text of
Revision 1: 11/14/25
NOTES:
1. ALL FABRICATED METAL COMPONENTS ARE STEEL SHOTBLASTED, ETCHED, PHOSPHATIZED, PREHEATED, AND
ELECTROSTATICALLY POWDER-COATED WITH T.G.I.C. POLYESTER POWDER COATINGS. PRODUCTS ARE FULLY CLEANED AND PRETREATED, PREHEATED AND COATED WHILE HOT TO FILL CREVICES AND BUILD FILM COATING.
COATED PARTS ARE THEN FULLY CURED TO COATING MANUFACTURER'S SPECIFICATIONS. THE THICKNESS OF
THE RESULTING FINISH AVERAGES 8-10 MILS (200-250 MICRONS).
2. PLASTIC INNER LINERS ARE MOLDED ON TOOLING DESIGNED FOR AND OWNED BY VICTOR STANLEY, INC.
3. PRODUCT MUST BE PERMANENTLY AFFIXED TO THE GROUND.
4. ANCHOR BOLT NOT PROVIDED BY VICTOR STANLEY, INC.
LIDS: S-2A DOME LID, WITH DECALS FOR RECYCLING CAN
SECURITY: MOUNT LID WITH 3 IN-LINE ANCHOR HOLES
AND BOTTOM PLATE COVER.
LITTER RECEPTACLE: MODEL SD-42, WITH S-2A DOME LID, COLOR BLACK, AS SUPPLIED BY VICTOR STANLEY, P.O.
DRAWER 330, DUNKIRK, MD 20754 USA, 1.800.368.2573 OR APPROVED EQUIVALENT.
RECYCLING RECEPTACLE: MODEL SD-42, WITH S-2A DOME LID AND RECYCLING DECALS, COLOR BLUE, AS SUPPLIED BY VICTOR STANLEY, P.O. DRAWER 330, DUNKIRK, MD 20754 USA, 1.800.368.2573 OR APPROVED EQUIVALENT.
Ø 28"
41-3/4"
38-5/8"
19"
36-GALLON CAPACITY HIGH
DENSITY PLASTIC LINER
(WEIGHT NOT TO EXCEED 6 LBS.)
SITS ON 3/8" x 3" SUPPORT BARS
(4) LEVELING FEET WITH 3/8" DIAMETER
THREADED STEEL SHAFT
5/8" SOLID
STEEL TOP
RING(42) 3/8" X 1"
VERTICAL
STEEL BARS
1/4" X 2-1/2"
HORIZONTAL
SOLID STEEL
BAND
3/4" SQUARE ANCHOR BOLT HOLES MOUNT
TO CONCRETE WITH TAMPER-PROOF BOLTS
PER MANUFACTURER'S RECOMMENDATIONS
ALT. # 6 TRASH AND RECYCLING RECEPTACLES
N.T.S.
CD.2
ALT. # 2 - PLAYER BENCH. MODEL DMTS 7.5 x 2 N.T.S.
CD.2
Department of Public Works
SC
H
EN
LE
Y
PA
R K
TE
N
N
IS
C O
U R
TS
O ve rlo ok D riv e, P itt sb ur gh , P
A
2025-88506
City of Pittsburgh
NTS
7/31/2025
CONSTRUCTION
DETAILS
CD-2
4 4
AutoCAD SHX Text Revisions
AutoCAD SHX Text Project Address
AutoCAD SHX Text Project Title
AutoCAD SHX Text Project No.
AutoCAD SHX Text Sheet Title
AutoCAD SHX Text Date
AutoCAD SHX Text Scale
AutoCAD SHX Text Sheet No.
of
| Sheets and Views |
| L-1 |
| 1.pdf |
| Sheets and Views |
| L-2 |
| 2.pdf |
| Sheets and Views |
| CD-1 |
| 3.pdf |
| Sheets and Views |
| CD-2 |
File details come from the government source that posted it. Updated .