SOW Attachments F-G.pdf
PDF 18 MB Posted
- Attached to
- Replacement of Overhead Doors - Solicitation
- Solicitation number
- W911QY-23-R-1024
About this file
This document provides details on a federal solicitation for replacement of overhead doors. The solicitation number is W911QY-23-R-1024 and is being issued by the Department of the Army Materiel Command Army Contracting Command located at Aberdeen Proving Ground. The solicitation seeks to replace overhead doors at an unspecified location and requires bidders to provide pricing, installation details, warranties, and schedules for delivery and completion by the specified response date. Specific products or services required are not outlined, as the attached Statement of Work and additional file attachments were not provided for review.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
H
X
X X
X X
X X
X
X X X X X X X
X X
X X
X X
X X
X X X X X X X
X
X
U.S. ARMY NATICK
SOLDIER SYSTEM CENTER
10 General Greene Avenue, Natick, MA 01760
FOR PUBLIC DISTRIBUTION
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text N11
AutoCAD SHX Text N12
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text T-26
AutoCAD SHX Text T-27
AutoCAD SHX Text
AutoCAD SHX Text T-24
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
TURNER STREET
AutoCAD SHX Text
TURNER STREET
AutoCAD SHX Text
RICH AVENUE
AutoCAD SHX Text
GREELY AVENUE
AutoCAD SHX Text
SAXTON STREET
AutoCAD SHX Text
EXIT RAMP
AutoCAD SHX Text
ENTRANCE RAMP
AutoCAD SHX Text
WILKIN AVENUE
AutoCAD SHX Text
DE CASTRO STREET
AutoCAD SHX Text
PRUSSMAN AVENUE
AutoCAD SHX Text
PINKHAM STREET
AutoCAD SHX Text
REGAN AVENUE
AutoCAD SHX Text
WILBUR AVENUE
AutoCAD SHX Text DeFRANZO SERVICE GATE
AutoCAD SHX Text
C LOT
AutoCAD SHX Text
M LOT
AutoCAD SHX Text
E LOT
AutoCAD SHX Text
D LOT
AutoCAD SHX Text
L LOT
AutoCAD SHX Text
I LOT
AutoCAD SHX Text
K LOT
AutoCAD SHX Text
J LOT
AutoCAD SHX Text
G LOT
AutoCAD SHX Text
H LOT
AutoCAD SHX Text
GENERAL GREENE AVENUE
AutoCAD SHX Text
KNOWLTON GATE
AutoCAD SHX Text
A LOT
AutoCAD SHX Text
AutoCAD SHX Text Lake Cochituate
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text #1
AutoCAD SHX Text
AutoCAD SHX Text
GREELY AVENUE
AutoCAD SHX Text
AutoCAD SHX Text
NO.
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NO.
AutoCAD SHX Text
BUILDING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text N12
AutoCAD SHX Text #1
AutoCAD SHX Text N11
AutoCAD SHX Text N
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text C
AutoCAD SHX Text E
AutoCAD SHX Text F
AutoCAD SHX Text G
AutoCAD SHX Text H
AutoCAD SHX Text I
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
NO.
AutoCAD SHX Text
GRID
AutoCAD SHX Text
NO.
AutoCAD SHX Text
GRID
AutoCAD SHX Text G5
AutoCAD SHX Text G6
AutoCAD SHX Text E6
AutoCAD SHX Text E5
AutoCAD SHX Text E4
AutoCAD SHX Text F3
AutoCAD SHX Text E3
AutoCAD SHX Text E3
AutoCAD SHX Text E3
AutoCAD SHX Text C3
AutoCAD SHX Text C4
AutoCAD SHX Text C4
AutoCAD SHX Text C6
AutoCAD SHX Text C2
AutoCAD SHX Text C6
AutoCAD SHX Text E1
AutoCAD SHX Text E1
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text F1
AutoCAD SHX Text G7
AutoCAD SHX Text G8
AutoCAD SHX Text H8
AutoCAD SHX Text C5
AutoCAD SHX Text B3
AutoCAD SHX Text I4
AutoCAD SHX Text G9
AutoCAD SHX Text G7
AutoCAD SHX Text E2
AutoCAD SHX Text F7
AutoCAD SHX Text C2
AutoCAD SHX Text E2
AutoCAD SHX Text E5
AutoCAD SHX Text C2
AutoCAD SHX Text C3
AutoCAD SHX Text E1
AutoCAD SHX Text E2
AutoCAD SHX Text F5
AutoCAD SHX Text C1
AutoCAD SHX Text E5
AutoCAD SHX Text E2
AutoCAD SHX Text C3
AutoCAD SHX Text C2
AutoCAD SHX Text G8
AutoCAD SHX Text G7
AutoCAD SHX Text G4
AutoCAD SHX Text C2
AutoCAD SHX Text E1
AutoCAD SHX Text E5
AutoCAD SHX Text E2
AutoCAD SHX Text F2
AutoCAD SHX Text G7
AutoCAD SHX Text C6
AutoCAD SHX Text G7
AutoCAD SHX Text C6
Luis.Martin1 Text Box Attachment F
Building 16 North End Wing Overhead Door Replacement
Scope of Work Attachment #13
Front of Bldg. 16.
East elevation.
Replace 1 doors
DEVCOM
Basic Research Lab Storage
Location of Bldg. 16 – North Wing Environmental Replace 1 doors at east elevation
Existing East Door - interior
• Insulated Metal Rolling – replace in kind
Existing East Door, Electric Motor Controls
• Up / Down / Stop --- New Similar
East Door Size
Inside Dims:
10’-7” Wide
10’-1” High
Outside Opening size
9’-11” wide
10’-0” high
• New doors will be motor operated
• Tie into existing electrical service
• GC Coordinate
GC field verify all dimensions and existing conditions.
Building 16 – North
Overhead Door Motor
Electric Power
Building 77 Overhead Door Replacement 2 Doors
North & South Similar
Scope of Work Attachment #9
Building 77 - North Elevation
Bldg. 77 (north is up)
Exterior Opening Size Width: 11’-11” Height: 9’-10”
South Door Bldg. 77
Match 2 Existing Doors:
North + South Similar
• Heavy duty, rolling steel metal, insulated overhead door with interior mount roll head, color grey.
• Existing operation is chain Pull.
• New operation shall be electrical motor, GC Coordinate elect service
Roll hood at Interior
Existing door is manually operated
Using a pull chain
Coordinate with existing ceiling height
Existing Door Mfr:
Overhead Door Co
Of Southeastern MA
145 Tosca Drive
Stoughton, MA 02072
781-828-4033
Attn: Thomas Cafaro
GC Provide both:
1) Pricing for a new electrical motor, installed, off adjacent electrical panel.
• GC responsible for all associated electrical design construction coordination with existing.
2) Provide alternate pricing to replace with manual operation, similar to existing.
• Note interior door size is larger than exterior door opening. Overlapping of materials in existing conditions
Existing pull chain shown to the right
Interior Door Size
Width: 12’-6” Height: 10’-4”
• Existing Door Jamb, front view
• Electrical Panel Board located to left of door at interior
• Existing Door Jamb, side view
• Self supporting Steel frame by GC, in a metal panel siding context, coordinate structural requirements, install details and coordination
• Existing Door header , form Interior, with roll hood
• Existing electrical Panel
• GC Coordinate electrical service to new OHD Motors
Building 86
Replacement
Scope of Work Attachment #11
Navy
New door will be located at the lower level of Bldg. 86 facing the Lake
Door Lower Level
Existing over door is segmented panels. The exterior appearance is that of a rolling overhead door. New Door, similar
Existing motor; ceiling mounted. New motor, similar. Protect light fixture and ceiling during work.
• Clg. Ht.: 8’-2”.
• Coordinate above ceiling connections etc.
Existing track is ceiling and wall mounted.
New track, similar
• Overhead Door to be replaced at Bldg.
86, Navy.
• Interior Door Size Dimensions:
• 9’-2” width
• 7’-2” height
• GC field verify all dimensions and existing conditions. Provide secure closure at end of workday. Coordinate with Owner Rep to clear arear of work.
• Existing opening to remain, remove door and frame – replace with new. Protect gate and ladder during work.
Jamb & Sill Left Jamb & Sill RightDoor Header
• Overhead Door is located within and existing metal frame.
• Frame with a frame. Door frame opening size at exterior: 8’-10” wide x 6’-11” high
• Overall framed opening includes adjacent egress door.
• Match new door color to existing frame and surroundings
Building 16
Replacement
Scope of Work Attachment #7
Rear
Building 16 on right, Front View. Building 36 is on left.
An access drive is between 16 and 36. Connecting two buildings is referred to as a “breezeway”. New door will be located at the rear of breezeway, at the west side, facing the lake
Rear
Eastern overhead door at breezeway- at front of building. This front door photo is NOT the door to be replaced, BUT his might be an access point for work and materials -near by work location at rear.
Coordinate logistics and access with Owners Representative/ COR. The Breezeway is technically considered Bldg. 16
Front Door – Not in Scope
Rear view of the breezeway (west side).
New overhead door will replace existing shown.
Serves as a rear loading dock, approx. 3’-0” above grade
• Overhead Door to be replaced.
• Opening measures 10’-0” high x 10’0” wide.
• GC field verify all dimensions and existing conditions.
• Existing opening to remain, remove door and frame – replace with new. Protect gate and ladder during work.
Interior View of existing Overhead door – to be replaced.
GC coordinate power requirements with existing electrical service
Electric motor located at upper left of wall near door – to be removed and replaced with similar.
Existing Door Mfr:
Overhead Door Co
Of Southeastern MA
145 Tosca Drive
Stoughton, MA 02072
781-828-4033
Attn: Thomas Cafaro
Roll hood at Interior Coordinate with existing ceiling height
Provide controls similar to existing:
• Open
• Close
• Stop
• Mount new control at 36” above finish floor
Provide new sensing device/ electric eye, similar to existing
Existing Motor;
Vanguard Power Door Products Inc
Mamaroneck, NY UL Listed
Pedestrian Door Operator for commercial and industrial use
Model H
½ HP
115 Volts 1 Phase 60 Hz
Building 93
Replacement
Scope of Work Attachment #12
Front of Bldg. 93. South elevation.
Replace 2 doors Left (west) and Right (east)
View from interior of 93
Existing door base damaged from exterior moisture and road salt
DPW
Material Storage
Location of Bldg. 93
Replace 2 doors at south elevation East Door jamb and head - from interior, with pull chain and roll head above
Bldg. 93 Environmental Interior
• Metal siding building
• Secure, GC coordinate access with building owner rep
• Pull Chain, roll top head
• High Ceiling
Existing East Door
• Currently active
Existing West Door
• Currently active
• Blocked by stare materials. Owner will move materials prior to construction
East Door Size
Inside Dims:
10’-7” Wide
10’-1” High
Outside Opening size
9’-11” wide
10’-0” high
East Door, sill view
• Trench and grate near door base
• West door similar
East Door, elevation view
• Salt damage at base
• Replace entire door. West door similar
GC field verify all dimensions and existing conditions.
Existing opening to remain, remove door and frame – replace with new.
Protect metal siding
Existing doors
• Manually operated
• Pull Chain
• New doors will be motor operated
• Tie into existing electrical service
• GC Coordinate
Existing West Door
• Metal Siding Building
• Existing Door deteriorated at base form road salt
Building 5
Replacement -Welding Shop
Scope of Work Attachment #10
Front of Bldg. 5
Replace Door at Southwest Side of Bldg. 5
Location of Welding Shop Door at Bldg. 5 – South west side
Overhead Door serves as an egress path, includes Man Door with Panic Hardware
Current door uses an electric Motor to operate. Replace with similar new motor. GC coordinate with existing electrical service
GC field verify all dimensions and existing conditions. Exterior siding – precast concrete panels
Existing opening to remain, remove door and frame
– replace with new.
Roll Door at Interior
ODH Door Size at Interior:
Width: 10’-7” gross Height: 12’-0” to underside overhead roll case
Integral Man door Size:
Width: 3’-0” Height: 7’-0”
Exterior Opening Dimensions Width: 9’-11” clear Height 11’-7” clear
Man Door
Man Door sill/ threshold
Man door integrated into roll up door– match existing. Provide Exit Device at Interior, pull latch at Exterior and electromagnetic latch to secure.
Existing OH Door Header at Exterior-right side
Existing OH Door Jamb and Sill at Exterior-right side
Existing OH Door Jamb and Sill at Exterior – left side
Existing OH Door Header at Exterior-left side
Door frame is a steel substructure attached to exterior wall. New door frame similar., GC coordinate structural requirements.
Painted steel channel at door jamb forms outside opening – to remain, paint
Door frame sets face of door approx. 3” inboard from interior face of exterior wall, painted, black. New, similar
GC coordinate power requirements with existing electrical service
Building 44 Man Doors (2) Replacement -Futures
Scope of Work Attachment #G7
44-NE
North façade of building in East wing.
Metal Entry door with large centered vision panel. Two large side lites with tempered glazing. Metal frame, painted.
44-NW
North façade of building in West wing. Simple metal door in metal wall with large centered vision panel
Facing south Facing west
44-NW
Building 44 has two-man doors in scope. Both located on north sides of building - but in separate wings. Bldg. 44 is a metal building. Doors are framed into exterior metal walls. Doors as entry points to office space at grade near driveway. Salt from the snowplows has degrades the doors and frames at the base.
44-NE
44-NW
North façade of building in West wing.
Simple metal door in metal wall with large centered vision panel
44-NE
North façade of building in East wing. Metal Entry door with large centered vision panel. Two large side lites with tempered glazing. Metal frame, painted.
NOT
Overhead Doors
Entry Door
Width: 3’-0” Height: 6’-10 1/2” 2” metal frame at head and jamb. Aluminum threshold.
Install new Metal door with centered vision panel and hardware. Match existing.
Include closer. Coordinate keying systems with Post Locksmith via COR
44 W Interior – Sill, note rust at frame
44-NW
North façade of building in West wing.
Simple metal door in metal wall with large centered vision panel
44 W Interior - Head
Aluminum Threshold. Flush at grade
North façade of building in West wing.
Simple metal door in metal wall with large centered vision panel
Head at Exterior, metal siding with drip edge, closer, door locate under entry roof
Auto opener, Not operating. Restore function in new install
44-NW
North façade of building in West wing.
Simple metal door in metal wall with large
Repair Rust at exterior wall
North façade of building in West wing.
Simple metal door in
North façade of building in West wing.
Simple metal door in
44-NE
North façade of building in East wing. Metal Entry door with large centered vision panel. Two large side lites with tempered glazing. Metal frame, painted.
Entry Door/ Steel framed storefront assembly, tempered glazing
2” metal frame, painted, at head and jamb. Aluminum threshold.
Width: 3’-0” Height: 6’-11 1/2”
Install new Metal door with centered vision panel and hardware. Match existing.
Include closer. Coordinate keying systems with Post Locksmith via COR
East wing. Metal Entry door with large centered vision panel. Two large side lites with tempered glazing. Metal frame, painted.
44 E Interior 44 E Exterior
New paint colors to match existing.
Interior and exterior
East wing. Metal Entry door with large centered vision panel. Two large side lites with tempered glazing. Metal frame, painted.
| Attach F - Map Facility |
| Sheets and Views |
| NSSC Basic Colored Map 2018-NSSC Map - Grid (For Public) |
| Attach G1- Bldg 16 - North OHD Photoset April 10 2023 |
| Building 16�North End Wing�Overhead Door Replacement� |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Attach G2- Bldg 77 OHD Photoset July 5 2022 |
| Building 77 Overhead Door Replacement� 2 Doors�North & South�Similar |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Slide Number 6 |
| Attach G3- Bldg 86 Navy OHD Photoset July 8 2022 |
| Slide Number 1 |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Attach G4- Bldg 16 OHD Breeze Photoset May 26 2022B |
| Building 16 Overhead Door Replacement |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Slide Number 6 |
| Slide Number 7 |
| Slide Number 8 |
| Slide Number 9 |
| Slide Number 10 |
| Attach G5- Bldg 93DPW Environ OHD Photoset July 8 2022 |
| Building 93 Overhead Door Replacement� |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Slide Number 6 |
| Attach G6- Bldg 5 Welding OHD Photoset June 21 2022 |
| Building 5 Overhead Door Replacement�-Welding �Shop |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Slide Number 6 |
| Attach G7- Bldg 44 Futures Photoset May 18 2023 |
| Building 44 Man Doors (2)�Replacement�-Futures |
| Slide Number 2 |
| Slide Number 3 |
| Slide Number 4 |
| Slide Number 5 |
| Slide Number 6 |
| Slide Number 7 |
| Slide Number 8 |
| Slide Number 9 |
| Slide Number 10 |
File details come from the government source that posted it. Updated .