SD-STD-03.01 Rev A Signed.pdf

This is a Performance Standard document (SD-STD-03.01, Revision A) issued by the U.S. Department of State's Bureau of Diplomatic Security establishing testing and performance requirements for Shatter Resistant Window Film (SRWF) used in Department of State applications.

The standard establishes a unified testing methodology for SRWF products to ensure consistency and enable direct comparisons between different films. Testing must be conducted at accredited independent facilities using the current version of ASTM F3007 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass. Test samples must consist of 3mm annealed glass measuring 12 x 12 inches with SRWF applied edge to edge. The standard requires 5 ball drop tests from 8 feet in height, with a passing result of 4 of 5 tests demonstrating retention characteristics 1, 2, or 3. Manufacturers must provide comprehensive reporting including product details, photographic documentation of test samples pre- and post-test, measured material thicknesses, video footage (recommended), and written documentation of any deviations from ASTM F3007. The Bureau of Diplomatic Security's Physical Security Programs Research and Development Section (DS/PSD/RD) maintains a DS-Approved List of SRWF Products for Department of State Applications; only films on this approved list are permitted for installation in Department facilities. The standard notes that compliance does not guarantee performance of entire glazing systems against specific blast loads but ensures baseline retention characteristics. DS/PSD/RD may periodically review and remove previously approved products due to ownership changes, quality concerns, insufficient documentation, or updated performance requirements. The technical point of contact is DSPSPRD@state.gov.