PassportCardRFP1.doc

S-AQMPD-06-R-1140

SECTION B – SUPPLIES OR SERVICES AND PRICES/COSTS

B.1 This is a firm-fixed price contract except for CLIN 0010, Technical Support, which is Time and Materials (T&M), and CLIN 0011, Travel, which is cost reimbursable. Offerors must submit a cost proposal for all items not marked as “Elective” for the entire life of this contract. Therefore, a price must be proposed for each CLIN (except where noted) . Appendix A of Section B provides a template for providing price information. A single award will be made.

B.2

In order to be considered for contract award, Offerors must propose prices for all CLINS, except where noted. A price for the CLIN 0011, Travel, is for informational purposes and will not be part of the cost evaluation. Elective CLINS are defined as those CLINS the Offeror is not required to bid as part of its proposal. CLIN 0001 will be executed by the Government upon contract award. All other CLINS will be executed, as needed, at the Government’s discretion.

B.3: SERVICES AND PRICE/COST

Base Year

CLIN

· A Card Personalization Printer for Centralized (High Volume) Print Facility

· A Card Personalization Printer for a Local (Low to Mid Volume) Issuance Agency

· Card Stock to produce 6000 Passport Cards

· RF Attenuating Sleeves for 6000 Passport Cards

· Personalization QA Readers

· Necessary SDKs to integrate solution into the Passport environment

· Technical Support/Engineering Services

Offeror should provide pricing for either 0002a or 0002b:

CLIN

Quantity

0002a 0002aa 0002ab High Volume Personalization Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers 1 Lot

1 Lot

CLIN

Quantity

0002b 0002ba 0002bb High Volume Personalization Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers 1 Lot

1 Lot

Offeror should provide pricing for either 0003a or 0003b:

CLIN

Quantity

0003a 0003aa 0003ab 0003ac Low to Mid Volume Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

0003b 0003ba 0003bb 0003bc Low to Mid Volume Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

CLIN

Quantity

Offerors must propose a price for CLIN 0005a and may propose prices for any or all of the following CLINs: 0005b, 0005c, 0005d

CLIN

0005a 0005aa 0005ab 0005ac 0005ad Preprinted RFID enabled Passport Card Stock, ready for personalization (and with privacy activation feature if applicable)

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

0005b 0005ba 0005bb 0005bc 0005bd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and one optional security feature

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

0005c 0005ca 0005cb 0005cc 0005cd Preprinted RFID enabled cards, ready for personalization (and privacy activation feature, if applicable), and two optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

0005d 0005da 0005db 0005dc 0005dd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and three optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

0006a

0006b RFID enabled, Passport Card Test Stock ready for personalization

Lot of 1000 cards

Lot of 10,000

Lot Lot

CLIN

0007a

0007b

0007c

0007d RF Attenuating Sleeves for Passport Cards

Lot of 1000 Sleeves

Lot of 10,000 Sleeves

Lot of 100,000 Sleeves

Lot of 1,000,000 Sleeves Lot Lot

Lot

Lot

CLIN

(Use 10 readers as the number to base the price on)

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

0018a

0018b Automatic Card Inspection System

ELECTIVE

Lot of 1 Module

Lot of 5 Modules Lot Lot

CLIN

Quantity

0019a

0019b Card Delivery System

ELECTIVE

Lot of 1 Card Delivery System

Lot of 5 Card Delivery Systems Lot Lot

CLIN

ELECTIVE

CLIN

ELECTIVE

CLIN

Quantity

(5 years) (See C.6 Warranty)

CLIN

Quantity

(10 years) (See C.6 Warranty)

Option Year 1

Offeror should provide pricing for either 1002a or 1002b:

CLIN

Quantity

1002a

1002aa 1002ab High Volume Personalization Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

1 Lot

CLIN

Quantity

1002b 1002ba 1002bb High Volume Personalization Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers 1 Lot

1 Lot

Offeror should provide pricing for either 1003a or 1003b:

CLIN

Quantity

1003a

1003aa

1003ab

1003ac Low to Mid Volume Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

1003b

1003ba 1003bb 1003bc Low to Mid Volume Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

CLIN

Quantity

Offerors must propose a price for CLIN 1005a and may propose prices for any or all of the following CLINs: 1005b, 1005c, 1005d

CLIN

1005a

1005aa

1005ab

1005ac

1005ad Preprinted RFID enabled Passport Card Stock, ready for personalization (and with privacy activation feature if applicable)

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

1005b

1005ba

1005bb

1005bc

1005bd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and one optional security feature

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

1005c

1005ca

1005cb

1005cc

1005cd Preprinted RFID enabled cards, ready for personalization (and privacy activation feature, if applicable), and two optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

1005d

1005da

1005db

1005dc

1005dd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and three optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

1006a

1006b RFID enabled, Passport Card Test Stock ready for personalization

Lot of 1000 cards

Lot

CLIN

1007a

1007b

1007c

1007d RF Attenuating Sleeves for Passport Cards

Lot of 1000 Sleeves

Lot of 10,000 Sleeves

Lot of 100,000 Sleeves

Lot of 1,000,000 Sleeves Lot Lot

Lot

Lot

CLIN

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

1018a

1018b Automatic Card Inspection System

ELECTIVE

Lot of 1 Module

Lot of 5 Modules Lot Lot

CLIN

Quantity

1019a

1019b Card Delivery System

ELECTIVE

Lot of 1 Card Delivery System

Lot of 5 Card Delivery Systems Lot Lot

CLIN

ELECTIVE

CLIN

ELECTIVE

CLIN

Quantity

CLIN

Quantity

Option Year 2

Offeror should provide pricing for either 2002a or 2002b:

CLIN

Quantity

2002a

2002aa 2002ab High Volume Personalization Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

1 Lot

CLIN

Quantity

2002b 2002ba 2002bb High Volume Personalization Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers 1 Lot

1 Lot

Offeror should provide pricing for either 2003a or 2003b:

CLIN

Quantity

2003a

2003aa

2003ab

2003ac Low to Mid Volume Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

2003b

2003ba 2003bb 2003bc Low to Mid Volume Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

CLIN

Quantity

Offerors must propose a price for CLIN 2005a and may propose prices for any or all of the following CLINs: 2005b, 2005c, 2005d

CLIN

2005a

2005aa

2005ab

2005ac

2005ad Preprinted RFID enabled Passport Card Stock, ready for personalization (and with privacy activation feature if applicable)

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

2005b

2005ba

2005bb

2005bc

2005bd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and one optional security feature

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

2005c

2005ca

2005cb

2005cc

2005cd Preprinted RFID enabled cards, ready for personalization (and privacy activation feature, if applicable), and two optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

2005d

2005da

2005db

2005dc

2005dd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and three optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

2006a

2006b RFID enabled, Passport Card Test Stock ready for personalization

Lot of 1000 cards

Lot

CLIN

2007a

2007b

2007c

2007d RF Attenuating Sleeves for Passport Cards

Lot of 1000 Sleeves

Lot of 10,000 Sleeves

Lot of 100,000 Sleeves

Lot of 1,000,000 Sleeves Lot Lot

Lot

Lot

CLIN

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

2018a

2018b Automatic Card Inspection System

ELECTIVE

Lot of 1 Module

Lot of 5 Modules Lot Lot

CLIN

Quantity

2019a

2019b Card Delivery System

ELECTIVE

Lot of 1 Card Delivery System

Lot of 5 Card Delivery Systems Lot Lot

CLIN

ELECTIVE

CLIN

ELECTIVE

CLIN

Quantity

CLIN

Quantity

Option Year 3 Offeror should provide pricing for either 3002a or 3002b:

CLIN

Quantity

3002a

3002aa 3002ab High Volume Personalization Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

1 Lot

CLIN

Quantity

3002b 300ba 3002bb High Volume Personalization Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers 1 Lot

1 Lot

Offeror should provide pricing for either 3003a or 3003b:

CLIN

Quantity

3003a

3003aa

3003ab

3003ac Low to Mid Volume Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

3003b

3003ba

3003bb

3003bc Low to Mid Volume Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

CLIN

Quantity

Offerors must propose a price for CLIN 3005a and may propose prices for any or all of the following CLINs: 3005b, 3005c, 3005d

CLIN

3005a

3005aa

3005ab

3005ac

3005ad Preprinted RFID enabled Passport Card Stock, ready for personalization (and with privacy activation feature if applicable)

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

3005b

3005ba

3005bb

3005bc

3005bd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and one optional security feature

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

3005c

3005ca

3005cb

3005cc

3005cd Preprinted RFID enabled cards, ready for personalization (and privacy activation feature, if applicable), and two optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

3005d

3005da

3005db

3005dc

3005dd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and three optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

3006a

3006b RFID enabled, Passport Card Test Stock ready for personalization

Lot of 1000 cards

Lot

CLIN

3007a

3007b

3007c

3007d RF Attenuating Sleeves for Passport Cards

Lot of 1000 Sleeves

Lot of 10,000 Sleeves

Lot of 100,000 Sleeves

Lot of 1,000,000 Sleeves Lot Lot

Lot

Lot

CLIN

(Use 10 readers as the number to base the price on)

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

3018a

3018b Automatic Card Inspection System

ELECTIVE

Lot of 1 Module

Lot of 5 Modules Lot Lot

CLIN

Quantity

3019a

3019b Card Delivery System

ELECTIVE

Lot of 1 Card Delivery System

Lot of 5 Card Delivery Systems Lot Lot

CLIN

ELECTIVE

CLIN

ELECTIVE

CLIN

Quantity

CLIN

Quantity

Option Year 4

Offeror should provide pricing for either 4002a or 4002b:

CLIN

Quantity

4002a

4002aa

4002ab High Volume Personalization Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

1 Lot

Offeror should provide pricing for either 4003a or 4003b:

CLIN

Quantity

4002b 4002ba 4002bb High Volume Personalization Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers 1 Lot

1 Lot

CLIN

Quantity

4003a

4003aa

4003ab

4003ac Low to Mid Volume Laser Engraving Printer, with 18000 6c reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

4003b

4003ba

4003bb

4003bc Low to Mid Volume Laser Engraving Printer, with ID-1, type 3 of 9 reader capability, pre-personalization

Lot of 1 Printer

Lot of 5 Printers

Lot of 10 Printers Lot Lot

Lot

CLIN

Quantity

CLIN

Quantity

Offerors must propose a price for CLIN 4005a and may propose prices for any or all of the following CLINs: 4005b, 4005c, 4005d

CLIN

4005a

4005aa

4005ab

4005ac

4005ad Preprinted RFID enabled Passport Card Stock, ready for personalization (and with privacy activation feature if applicable)

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

4005b

4005ba

4005bb

4005bc

4005bd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and one optional security feature

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

4005c

4005ca

4005cb

4005cc

4005cd Preprinted RFID enabled cards, ready for personalization (and privacy activation feature, if applicable), and two optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

4005d

4005da

4005db

4005dc

4005dd Preprinted RFID enabled cards, ready for personalization (and with privacy activation feature if applicable), and three optional security features

ELECTIVE

Lot of 1000 cards

Lot of 10,000

Lot of 100,000

Lot of 1,000,000 Lot Lot

Lot

Lot

CLIN

4006a

4006b RFID enabled, Passport Card Test Stock ready for personalization

Lot of 1000 cards

Lot

CLIN

4007a

4007b

4007c

4007d RF Attenuating Sleeves for Passport Cards

Lot of 1000 Sleeves

Lot of 10,000 Sleeves

Lot of 100,000 Sleeves

Lot of 1,000,000 Sleeves Lot Lot

Lot

Lot

CLIN

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

CLIN

Quantity

4018a

4018b Automatic Card Inspection System

ELECTIVE

Lot of 1 Module

Lot of 5 Modules Lot Lot

CLIN

Quantity

4019a

4019b Card Delivery System

ELECTIVE

Lot of 1 Card Delivery System

Lot of 5 Card Delivery Systems Lot Lot

CLIN

ELECTIVE

CLIN

ELECTIVE

CLIN

Quantity

CLIN

Quantity

B.4 PRICING TABLE

Offerors shall submit unit and extended pricing using the attached Appendix A to Section B.

SECTION C – DESCRIPTION/SPECIFICATIONS/STATEMENT OF WORK

C.1 INTRODUCTION

C.1.1 Passport Card Program Background

The Department of State, Bureau of Consular Affairs (DoS/CA), in cooperation with the Department of Homeland Security (DHS), plans to develop and implement a U.S. card-format passport; a credit-card-size travel document. The Passport Card will be an accepted alternative to the traditional book-style passport for presentation at U.S. land and sea border crossings by June 1, 2009. The Passport Card is intended to be functional in the DHS People Access Security Service (PASS) system, an integrated, automated border-crossing identification system including programs such as NEXUS, Secure Electronic Network for Travelers’ Rapid Inspection (SENTRI), and Free and Secure Trade Program (FAST).

The origin of this program is Section 7209 of the Intelligence Reform and Terrorism Prevention Act of 2004 (IRTPA) that requires passports or other secure documents denoting citizenship and identity be used to enhance border security within the Western Hemisphere. The Act, now law and amended, requires the Secretary of Homeland Security, in consultation with the Secretary of State, to develop and implement a plan before June 1, 2009 to require all travelers, U.S. citizens and non-U.S. citizens alike, to present "a passport or other document, or combination of documents, deemed by the Secretary of Homeland Security to be sufficient to denote identity and citizenship” when entering the United States . The Act also requires that DHS and DoS expedite travel for frequent travelers, including those who reside in border communities. The Passport Card is specifically designed to facilitate the travel of those who reside in border communities.

A description of the anticipated DoS Passport Card personalization process is in Section J, Attachment A: Notional DoS Concept of Operations.

A DHS description of the anticipated use of the Passport Card at U.S. land border crossings is in Section J, Attachment B: Notional DHS Concept of Operations.

C.1.2 Passport Card Items To Be Procured

C.1.2.1 General

To successfully meet the mandate and timeline of the above Act, DoS plans to procure a solution that consists of Passport Card printers, card stock, RF Attenuating Sleeves, Personalization Quality Assurance (QA) readers and the necessary technical support services.

Throughout the life of the contract, DoS will purchase supplies and services to permit ongoing Passport Card personalization.

DoS seeks the flexibility to obtain individual components of the procured solution to accommodate growth, production concept changes, etc.

Additionally, DoS seeks the flexibility in the option years to use the Card Stock and support infrastructure, such as printers and readers procured under this RFP to create additional types of Travel Cards. These alternative Travel Cards would be functionally similar to the Passport Card but would be used to denote disparate travel privileges.

C.1.3 Passport Card Program Description

C.1.3.1 Three-Phased Program Implementation

To meet CA’s ambitious implementation milestones, program risk will be minimized with a carefully controlled three-phased effort. Program Phase I is to acquire the Passport Card and related products such as printers, RF Attenuating Sleeves, and reader/writers. Program Phase II is to modify, develop, and test the necessary systems and infrastructures to utilize those products that were acquired during Program Phase I to produce the Passport Card. Program Phase III is to deploy the capability to issue the Passport Card system-wide within CA.

C.1.3.2 Program Phase I: Passport Card Acquisition

The goal of Phase I is to acquire a Passport Card solution to satisfy the requirements of the Western Hemisphere Travel Initiative (WHTI).

C.1.3.2.1 Passport Card Acquisition Strategy

To meet the Program Phase I goal, CA is expanding its capability to issue travel documents. The current Passport issuance infrastructure will be modified to support Passport Card issuance.

The major elements of the DoS acquisition strategy are:

1. Issue a Request for Information (RFI) for industry comment

2. Hold Industry Day conference for Questions and Answers (Q&A) concerning RFI

3. Obtain NIST Certification of the card architecture described in this Statement of Work (SOW)

4. Issue RFP

5. Require proposals 45 calendar days after RFP issuance

6. Review proposals (technical and cost) and down-select top Offerors

7. Observe a demonstration of top Offerors’ products and down-select for testing

8. Conduct Government testing of top Offerors’ products (as described in Section J: Attachment I)

9. Evaluate results of Government tests of top Offerors’ products

10. Select an Awardee.

C.1.3.3 Program Phase II: Pre Deployment Preparation

Once a Passport Card personalization solution is procured, CA will leverage the existing DoS infrastructure to issue Passport Cards.

Phase II will seek to mitigate the following risks:

· DoS Concept of Operations for personalization of cards is new and untested.

· DoS must modify and test existing IT systems to conduct issuance of the Passport Card, archive issuance data, and facilitate data sharing with DHS.

· DHS’s Concept of Operations for the Passport Card is new and untested.

C.1.3.4 Program Phase III: Deployment

During Phase III, CA will begin receipt of updated passport applications, to include requests for Passport Cards, and begin issuance of fully valid Passport Cards at the Print Facility and select Domestic Passport Agencies.

C.2 PROCUREMENT OBJECTIVE AND SCOPE

This procurement will lead to the procurement of specified equipment, supplies, materials and technical support needed for the production of a new U.S. Passport Card with radio frequency identification (RFID) capability, using an ISO 18000 6C compliant embedded integrated contactless circuit (ICC). The issuance of the Passport Card is described in Section J, Attachment A: Notional DoS Concept of Operations. The use of this new U.S. Passport Card is described in Section J, Attachment B: Notional DHS Concept of Operations.

C.3 RESERVED

C.4 DELIVERABLES

Through the life of the contract DoS will purchase equipment, supplies and services to permit ongoing Passport Card personalization. Deliverables are described below for the Base Year and four Option Years. It is anticipated that printer consumables are not required for production of Passport Cards. If the Offeror’s solution requires printer consumables to be successful, Offeror shall specify those printer consumables and their cost in the Offeror’s proposal.

C.4.1 Base year

C.4.1.1 Passport Card Personalization Solution Integration Kit (CLIN 0001)

The Offeror shall provide a Passport Card Personalization Solution Integration Kit (as described in C.7.1). To facilitate the rapid schedule requirement of this project, the assumption is that the Offeror may use the equipment from the demonstration to make up the core of the integration kit.

The Passport Card Personalization Solution Integration Kit (CLIN 0001) shall be delivered within 10 business days of contract award. The primary purpose of CLIN 0001 is to facilitate Program Phase II. (For this CLIN, the demonstration model is acceptable).

C.4.1.2 High Volume Personalization Laser Engraving Printer (CLIN 0002)

The Offeror shall provide a High Volume Personalization Laser Engraving Printer (as described in C.7.2). Offerors may propose either CLIN 0002a or CLIN 0002b.

C.4.1.3 Low to Mid Volume Personalization Laser Engraving Printer (CLIN 0003)

The Offeror shall provide a Low to Mid Volume Personalization Laser Engraving Printer (as described in C.7.2). Offerors may propose either CLIN 0003a or CLIN 0003b.

C.4.1.4 SDK for CLIN 0002 and CLIN 0003 printers (CLIN 0004)

The Offeror shall provide SDKs for the CLIN 0002 and CLIN 0003 printers described in C.7.2). It is the government’s desire to have a single SDK for both types of printers (CLIN 0004a only). If this is not possible, then the Offeror can offer a separate SDK for each printer (both CLIN 0004a & 0004b).

C.4.1.5 Preprinted RFID enabled Passport Card Stock, ready for personalization (CLIN 0005)

The Offeror shall provide preprinted RFID enabled Passport Card Stock ready for personalization (as described in C.7.3). CLIN 0005a is mandatory. CLIN 0005b, CLIN 0005c, CLIN 0005d are elective for Offerors choosing to provide more than the mandatory security features. Offerors may provide a price for any or all of the elective CLINs 0005b – 0005d C.4.1.6 Post award RFID enabled Passport Card Test Stock, ready for testing in Passport Card Personalization System (CLIN 0006)

The Offeror shall provide Passport Card Test Stock ready for testing with Passport Card Personalization System (as described in C.7.4). Passport Card Test Stock will be identical to Passport Card Stock, less artwork and features.

C.4.1.7 RF Attenuating Sleeves for RFID enabled cards (CLIN 0007)

The Offeror shall provide RF Attenuating Sleeves for RFID enabled cards (as described in C.7.5).

C.4.1.8 Personalization QA ISO 18000-6C Reader (CLIN 0008)

The Offeror shall provide Personalization QA ISO 18000-6C Passport Card Readers (as described in C.7.6).

C.4.1.9 SDK for CLIN 0008 reader (CLIN 0009)

The Offeror shall provide SDKs for the Personalization QA ISO 18000-6C Passport Card Readers (as described in C.7.6).

C.4.1.10 Technical Support (CLIN 0010)

The Offeror shall provide Technical Support (as described in C.7.7).

C.4.1.11 Travel (CLIN 0011)

Travel is associated with Technical support (as described in C7.7).

C.4.1.12 High Volume Printer on-call Remedial Maintenance (CLIN 0012)

The Offeror shall provide on-call remedial maintenance for the High Volume Printers specified in CLIN 0002.

C.4.1.13 Low to Mid Volume Printer on-call Remedial Maintenance (CLIN 0013)

The Offeror shall provide on-call remedial maintenance for the Low to Mid Volume Printers specified in CLIN 0003.

C.4.1.14 Replacement parts for printers (CLIN 0014)

The Offeror shall provide a list of replacement parts and associated prices for the CLIN 0002 and CLIN 0003 printers.

C.4.1.15 High Volume Printer Maintenance Kit for onsite preventative maintenance of printer specified in CLIN 0002 (CLIN 0015) The Offeror shall provide a High Volume Printer Maintenance Kit for U.S. Government onsite preventative maintenance of printers specified in CLIN 0002.

C.4.1.16 Low to Mid Volume Printer Maintenance Kit for onsite preventative maintenance of Printer specified in CLIN 0003 (CLIN 0016)

The Offeror shall provide a Low to Mid Volume Printer Maintenance Kit for U.S. Government onsite preventative maintenance of printers specified in CLIN 0003.

C.4.1.17 Operational Training for Passport Card System Operations (CLIN 0017)

The Offeror shall provide operational training for agency / facility staff.

C.4.1.18 Automatic Card Inspection Equipment (CLIN 0018 ELECTIVE) If applicable, the Offeror shall provide an Automatic Card Inspection System (as described in C.7.9).

C.4.1.19 Card Delivery System (CLIN 0019 ELECTIVE)

If applicable, the Offeror shall provide a Card Delivery System (as described in C.7.10).

C.4.1.20 Card Personalization Unit for Centralized (High Volume) Print Facility (CLIN 0020 ELECTIVE)

If applicable, the Offeror shall provide a card Personalization unit for a centralized (High Volume) print facility (as described in C.7.11).

C.4.1.21 Card Personalization Unit for Local (Low to Mid Volume) Issuance Agency (CLIN 0021 ELECTIVE)

If applicable, the Offeror shall provide a card Personalization unit for a local (Low to Mid Volume) Issuance Agency (as described in C.7.12).

C.4.1.22 Extended Warranties (CLIN 0022 and CLIN 0023)

The Offeror shall provide extended warranties for five years and ten years for Passport Card Stock (CLIN 0005) operation against physical and electronic failures (as described in C.6.1).

C.4.2 Option Years 1 -4 The Offeror shall provide the specified equipment, supplies, materials, and technical support needed for Option Years 1-4 as described in Section B.

C.5 DELIVERABLE SCHEDULE

The Offeror shall meet the deliverable schedule specified in Section F.

C.6 WARRANTY

C.6.1 Deliverable Warranties At a minimum, the Offeror shall warrant supplies provided under this contract, to include but not limited to, printers, readers, and related equipment, in accordance with industry best practices.

Offeror shall produce a card that will remain fully functional after passing through the personalization process. “Fully functional” means that the card fully communicates and operates in a normal working environment based on the requirements within this document. The Offeror will not be responsible for replacing Card Stock damaged due to Government equipment malfunctions or operator errors.

The Offeror shall provide a certification of warranty of a minimum of at least three years from the date of delivery. The Offeror shall provide two extended warranty options, five and ten years (CLIN 0022 and CLIN 0023) from the date of delivery.

Throughout the warranty period, passport card and the ICC shall operate against physical and electronic failures under normal use. Card Stock and media shall operate for the warranty period without physical and mechanical failures (examples: delaminating, cracking, discoloration), as well as maintain full performance of the chip. Defective products shall be replaced or refunded as requested by the Government at the Offeror’s expense.

The Offeror shall provide a mechanism for the return of defective cards, e.g. no RFID read in operational environment.

The Offeror shall provide a monthly report of all returned cards.

These warranties shall in no way impair or diminish the rights of the U.S. Government under any other clause of this contract.

C.7 REQUIREMENTS

Requirements are specified below for the following delivered products and services:

· Passport Card Personalization Solution Integration Kit (CLIN 0001)

· Passport Card Laser Engraving Personalization Printers for a Centralized (High Volume) Print Facility and for a Local (Low to Mid Volume) Issuance Agency (CLINs 0002, 0003, 0004)

· Passport Card Stock (CLIN 0005)

· Passport Card Test Stock (CLIN 0006)

· RF Attenuating Sleeves (required) and Additional Privacy Features (if applicable) (CLIN 0007)

· Personalization QA (Quality Assurance) Reader(s) (CLINs 0008 and 0009)

· Technical Support (CLIN 0010)

· Automatic Card Inspection Equipment (Elective) (CLIN 0018)

· Card Delivery System (Elective) (CLIN 0019)

· Card Personalization Unit for a Centralized (High Volume) Print Facility (Elective) (CLIN 0020)

· Card Personalization Unit for a Local (Low to Mid Volume) Issuance Agency (Elective) (CLIN 0021) The Offeror shall assure that both the Centralized (High Volume) and Local (Low to Mid Volume) Personalization Printers produce identical documents in terms of configuration, format, coloration, and appearance at each issuance location.

The Offeror shall not sell, give, or transfer to any other government, entity, or person, any products, materials, and/or processes unique to United States Passport Card or its production.

C.7.1 Passport Card Personalization Solution Integration Kit (CLIN 0001) The Offeror shall provide a Passport Card Personalization Solution Integration Kit for Program Phase II: Pre Deployment Preparation as described in C.1.3.3. To facilitate the rapid schedule requirement of this project, the assumption is that the Offeror may use the equipment from the demonstration to make up the core of the integration kit. The kit will include:

· One High Volume Personalization Laser Engraving Printer as specified in C.7.2 in a configuration selected by DoS from those provided by the Offeror

· One Low to Mid Volume Personalization Laser Engraving Printer as specified in C.7.2 in a configuration selected by DoS from those provided by the Offeror

· Card Stock as specified in C.7.3 to produce 6000 Passport Cards

· RF Attenuating Sleeves as specified in C.7.5 for 6000 Passport Cards

· Personalization QA Reader(s) as specified in C.7.6

· Necessary SDKs to integrate the solution into the Passport environment

· Technical Support/Engineering Services Note: If Card Stock and RF Attenuating Sleeve stock above will not be available in the quantity required, then the Government will accept an initial delivery of a minimum 500 cards and sleeves per week (beginning 10 days after award) until a total of 6000 card and sleeve count is reached.

C.7.2 Passport Card Laser Engraving Personalization Printers (CLINs 0002, 0003, 0004) Proposed printers will be integrated into the existing environment as described in Section J, Attachment A. Specifically, DoS will be expanding both High Volume print centers and Low to Mid Volume regional facilities for card issuance. These are encapsulated in CLIN 0002 and CLIN 0003. In each case, the system needs to be able to obtain either the ICC number or the Card number in order to match the card to the vendor supplied inventory before personalization (See Section J, Attachment C).

The Offeror shall provide a printing solution that can be described in the following categories:

High Volume card personalization capability that can reside at a Centralized Print Facility or other printing facility that can accommodate larger equipment for large batch personalization.

Low to Mid Volume card personalization capability that can reside at the various Regional Issuance (Low to Mid Volume Issuance) Agencies and be utilized within typical office cubicle boundaries to support expedited issuance of Passport Cards to walk-in or nearby customers for same-day service.

Card characteristics, after personalization, shall be consistent across these two platforms, leaving no discernable difference to the naked eye. The card stock shall be interchangeable between the printers. All desired features described in this section shall also be available on either High Volume or Low to Mid Volume platforms.

C.7.2.1 Personalization Data

The proposed printer shall utilize laser engraving for personalization of the data described in Section J: Attachment C, Data Format for Passport Card. The laser engraving process shall therefore be required on both the front and rear of the card for personalization. The Offeror shall show the ability to print the entire MRZ set of characters as tactile elements at a minimum, while meeting all other SOW requirements.

C.7.2.2 Personalization Printer Interface

The DoS Travel Document Issuance System (TDIS) will be utilized for personalization services. DoS will adapt the Passport printing software within TDIS for Passport Card printing, including the software capability to dynamically manage print jobs, features, and layouts. To enable this integration process, the following shall be required:

· USB 2.0 and/or Ethernet interface from Printer to host workstation.

· Printer Driver for MS Windows 2003 and XP Operating Systems and Server.

· Printer SDK capable of communicating with Printer Driver for passing of card data and print layout, and receiving feedback and control messages from the printer including real-time inventory and tracking information of cards and consumables.

· GUI access to generate card print layout, both front and back. This shall include the ability to do the following at the discretion of DoS:

· set image size, type, and location,

· set text size, type, font, and location,

· embed other objects or features, such as variable microprint.

· Customizable sample application utilizing MS C++ or MS C#/.NET (preferred)…