Amendment_1.pdf

PAGE OF PAGES11. CONTRACT ID CODE

IAMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 I 4

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION / PURCHASE REQ. NO. PROJECT NO. (If Applicable)

01 01/24/2013

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

U.S. Department of Justice Ms. Jennifer R. Unger, Contracting Officer Federal Bureau of Investigation 170 Marcel Drive, Winchester, V A 22602 Finance Division EMAIL: Jennifer.Unger@ic.fhi.gov Operational Support Contracts Unit PH: (540) 868-4811 I FX: (540) 868-4700

8. NAME AND ADDRESS OF CONTRACTOR (No. , street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION NO

RFP-OSCU-OSU 130 IX

9B. DATED (See Item 11)

12/20/2012

10A MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (See Item 13)CODE I FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

[X] The above number solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers [ ] is extended, [ X ] is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended , by one of the following methods.

(a) By completing Items 8 and 15, and returning _1_copy of the arnendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (/f required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OR CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A . THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify Authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT

ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data. etc.) SET FORTH IN ITEM 14. PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF

D. OTHER (Specify type of modification and authOrity)

X FAR 15.206 (b) - AMENDING THE SOLICITATION

E. IMPORTANT: Contractor [ ] is not [X] is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION(Organized by UCF section headings, including solicitationicontract subject matter where feasible).

PLEASE SEE THE A TTACHED DESCRIPTION OF CHANGES.

Except as provided herein, all items and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE

SIGNED

Jennifer R. Unger

(Signature of person authorized to sign)

NSN 7540-01-152-8070

PREVIOUS EDITION UNUSABLE

16C. DATE

SIGNED

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243 mailto:Jennifer.Unger@ic.fhi.gov

SF30 Continuation Page 2 of 4

AMENDMENT #1, dated 1124/2013, shall incorporate the following changes:

Remove: Section C.4.1- Statement of Work / Projectile Weight (page 8)

All references to the projectile weight tolerance (+/- 1) for service, training, training reduced lead and frangible.

Replace: Section C.4.1- Statement of Work / Projectile Weight (page 8)

Projectile weight tolerance on any projectile weighing more than 100 grains is ±l.S% of the nominal weight and ±2.0% ofthe nominal weight for projectiles nominally weighing less than 100 grains.

Remove: Section C.4.2 - Statement of Work / Projectile Design (page 8)

Training - The projectile shall not be of a frangible design and/or have a jacket of any metal other than copper.

Training Reduced Lead - The projectile shall not be of a frangible design and/or have a jacket of any metal other than copper.

Replace: Section C.4.2 - Statement of Work / Projectile Design (page 8)

Training - The projectile shall not be of a frangible design and/or have a jacket of any metal other than copper, with the exception of brass (alloy of copper and zinc).

Training Red uced Lead - The projectile shall not be of a frangible design and/or have a jacket of any metal other than copper, with the exception of brass (alloy of copper and zinc).

Remove: Section M.3.4 - Phase II /6. Penetration (page 101-102)

List of Penetration Test Materials in its entirety.

Replace: Section M.3.4 - Phase II /6. Penetration (page 101-102)

1 ) T-shirt Material

Sew Classic Knits, white solid interlock, Item Number 8043382

Available from www.joann.com.

2) Dress Shirt Material

Symphony Broad Cloth, Item Number 636373

Available from www.joann.com http:www.joann.com http:www.joann.com

SF30 Continuation Page 3 of 4

3) Polartec Insulation

Polartec Classic 200, Item number 7614-9017

Available from Mill Direct Textiles

15 Union Street, Lawrence, MA 01840 www.milldirecttextiles.com

4) Denim

14 oz, Bull Denim Navy, Item Number 40276

Available from Interior Mall

1004 22 nd Street, Barling, AZ 72923, PH: (479) 434-6780 www.interiormall.com

5) Gypsum Board 1/2 inch Gypsum Panel, "SHEETROCK" Brand, Item Number 14301211708 Available from The Home Depot.

6) Plywood

23/32 inch Sanded Pine Plywood, Item Number 166057

Available from The Home Depot.

7) Sheet Metal

20 ga Galvanized Plate

Available from Dominion Steel Inc.

4920 Quantity Drive, Fredericksburg, VA 22408; PH: (540) 898-1249 www.dominionsteelinc.com

8) Automobile Windshield

1/4 inch AS.1 Auto Glass

Available from Glass Distributors Inc.

3800 Kenilworth Avenue, Bladensburg, MD 20710; PH: (301) 779-2430 www.glassdistributorsinc.com

Remove: Section M.3.4 - Phase II /12. Quality Control Inspection / paragraph 1 (page 107)

The vendor must be certified by an authorized registrar that offers third-party audit services to the ISO 9000 series standards, namely the International Standards of Quality Control as described in International Standard ISO 9001 (Quality Systems - Model for quality assurance in design, development, production, installation and servicing), Second Edition 1994-07-01, or http:www.glassdistributorsinc.com http:www.dominionsteelinc.com http:www.interiormall.com http:www.milldirecttextiles.com

SF30 Continuation Page 4 of 4 equivalent. The offeror shall provide proof of certification to the FBI at time of, or prior to, submission of test samples.1

Replace: Section M.3.4 - Phase II /12. Quality Control Inspection / paragraph 1 (page 107)

It is preferred the vendor be certified by an authorized registrar that offers third-party audit services to the ISO 9000 series standards, namely the International Standards of Quality Control as described in International Standard ISO 9001 (Quality Systems - Model for quality assurance in design, development, production, installation and servicing), Second Edition 1994-07-01, or equivalent. The offeror shall provide proof of certification to the FBI at time of, or prior to, submission of test samples.2