Reference_Parts_Sheets.pdf
PDF 46 MB Posted
- Attached to
- Term Agreement for Traffic Signal Components
- Solicitation number
- RFB-14DPW-1765
- Issued by
- Marion County, Indiana
About this file
This is a Reference Parts Sheets document for a Term Agreement for Traffic Signal Components solicitation issued by the City of Indianapolis and Marion County Department of Public Works. The document provides detailed specifications and technical information for various traffic signal components and related equipment that bidders may supply under the agreement. Products outlined include McCain traffic signal housings in 8-inch and 12-inch configurations available in aluminum or polycarbonate materials, McCain pedestrian signal housings in 12-inch and 16-inch sizes, LEOTEK Frontier 16" x 18" countdown pedestrian signal modules with LED technology compliant to ITE PTCSI standards, Guardian Wave independent accessible pedestrian signal devices with infrared detection capabilities, PedConnex utility and app software for programming and data management, and test equipment for traffic signal control systems including the PCMT-8800 conflict monitor tester and Mitchell Technology 578F-1 LED test display. The solicitation encompasses items numbered 1 through 252, with specific reference sheets provided for McCain traffic signal and pedestrian signal housings, LED pedestrian modules, push-button and wave-activated pedestrian signal devices, and various testing and diagnostic equipment. Bids are due not later than 10:00 a.m. on Thursday, July 23, 2026, with Kyle Willis serving as the buyer contact at (317) 327-4641.
The reference parts sheets provide comprehensive technical specifications including dimensions, materials, operating temperatures, weights, available options, and performance standards for each component category. Traffic signal housings are available in multiple configurations with customizable features such as terminal block locations, door hardware options, visors, and backplates, with operating temperatures ranging from -37°C to +74°C and humidity tolerance of 0 to 95 percent non-condensing. Pedestrian signal modules are fully compliant with ITE specifications and include advanced surge protection meeting NEMA TS 2-2003 and IEC standards. Test equipment specifications include detailed operational capabilities for conflict monitoring and LED display diagnostics. The document does not specify pricing terms, contract duration, renewal options, or funding sources, as these elements typically appear in separate bid documents or solicitation terms and conditions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Term_Agreement_for_Traffic_Signal_Components_(Addendum_#1_Revision).pdf | ||
| Sample-Professional_Services_Agreement.docx | DOCX document | |
| Sample-Supply_Agreement.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ITEM 1
ITEM 2
ITEM 9
ITEM 10
ITEM 11
ITEM 11
ITEM 12
ITEM 13
ITEM 15
ITEM 17,18,19 AND 20
ITEM 16
ITEM 16
ITEM 17,18,AND 19
ITEM 27
ITEM 28
ITEM 29
ITEM 29
ITEM 31
ITEM 32
ITEM 34 AND 35
ITEM 36
ITEM 37
ITEM 38,39 AND 40
ITEM 41 AND 42
ITEM 43
ITEM 43
ITEM 44
ITEM 45
ITEM 46
ITEM 48
ITEM 49
ITEM 50 AND 51
ITEM 52
ITEM 54
ITEM 55
ITEM 56
ITEM 57
ITEM 63
ITEM 64
ITEM 65
ITEM 66 AND 67
ITEM 68
ITEM 70
ITEM 71
ITEM 72
ITEM 79, 80 AND 81
ITEM 79,80 AND 81
ITEM 82
ITEM 86
ITEMS 92 TO 128
ITEM 129
ITEM 129
ITEM 130 AND 131
ITEM 132,133 AND 134
ITEM 135
ITEM 136
ITEM 136
ITEM 137
ITEM 140
ITEM 141
ITEM 145
ITEM 145
ITEM 150
ITEM 153
ITEM 151
ITEM 154
ITEM 154
ITEM 156 AND 157
ITEM 158
ITEM 159
ITEM 160
ITEM 161 AND 162
ITEM 163
ITEM 164
ITEM 165
ITEM 166
ITEM 167
ITEM 168
ITEM 169
ITEM 170
ITEM 171
ITEM 173
ITEM 175
ITEM 176
ITEM 177
ITEM 178
ITEM 183
ITEM 179
ITEM 180,181 AND 182
ITEM 184
ITEM 185
ITEM 186
ITEM 187
ITEM 188
ITEM 189
ITEM 190
ITEM 191
ITEM 192
ITEM 193
ITEM 194
ITEM 195
ITEM 196
ITEM 198,199,200,201 AND 202
ITEM 212
ITEM 211
ITEM 213,214,215 AND 216
McCAIN TRAFFIC SIGNAL HOUSING
FRONT'
8" HOUSING
frt7\11 �_L l--10.0· _j
TOP'
SIDE'
1-s.1· �
12" HOUSING
[IJ]J
1-13.5" ---1
3-SECTION'1
TYPICAL CONFIGURATIONS
§so Vertical
BE rn
� (ID
Horizontal HAWK Doghouse
Mixed Use
STANDARD FEATURES
• Modular sections, one-piece, injection molded or cast
• 72-tooth serrated boss and reinforcing ribs, top and bottom
• Brass threaded inserts for visor attachment (4)
• Housings have a cast boss for mounting a 5 or 6-position terminal block2
• Words red, amber, and green are cast next to each boss to identify light source lead wires
• 5 or 6-position terminal block installed in center section3
• Stainless steel door roll pins and eye bolt/wing nut assemblies
• Integral lugs on the housing and doors with stainless steel roll pins provide effective door hinges
• Weathertight EPDM rubber door gasket
GENERAL SPECIFICATIONS
8" HOUSING 12" HOUSING
Dimensions': 10"W x 10"H x 7"0 I 13.5"W x 13.5"H x 7"D
Material: Aluminum: Type 360, reduced corrosion, increased powder coat adhesion
Polycarbonate: Ultraviolet and heat stabilized, flame retardant, permanently colored, 10% fiberglass reinforcement
Finishes: Aluminum: Powder coated Polycarbonate: Colored resins integral to housing
Colors: Federal yellow, signal green, black, or custom colors
Light Source: LED or incandescent
Mounting: 2.0" hole top and bottom fits 1.5" NPT fittings
Environmental: Operating temperature: -37°C to +74°C Humidity: 0 to 95% (non-condensing)
Shipping Weight5: Aluminum: 4 lbs l Aluminum: 7.8 lbs
Polycarbonate: 2.1 lbs Polycarbonate: 4.2 lb_s
OPTIONS
• Fiberglass-free polycarbonate
• Aluminum and polycarbonate housings can be mixed in one signal head
• Location, quantity, and type of terminal blocks
• Door hardware: permanent or removable6
• Visors
• Backplates
• Mounting: Various framework, orientation, and configurations
• High-performance (highly directional) signal version
• Traffic Signal Visor Heater
'Drawing dimensions are approximates and may vary, minor differences may not be shown; 8" and 12" housing depths are approximately the same '3-Section 12" housing shown; 3-section 8" housing dimensions listed in parenthesis 'One side of terminal block with fast-on terminals, the other side with screw terminals 'Alternate mounting available 'Dimensions rounded to the nearest 0.5"; 1-section 'Empty with out components: 1-section 'Permanent with roll pins or removable with clevis pins
VN/\NS\l'/(llCQ.CQf!l/rn,:ca11)
SWARCO reserve£. thF:- right to makr: d1angr�$ at :Jn) time 10 orde, to supply the best prwhJCt possible.
ViWARCO l�cCain, Inc. Updated 10/01/2024 swalCOD�
ITEM 217,218,219 AND 220
McCAIN PEDESTRIAN SIGNAL HOUSING
12" HOUSING
FRONT
16" HOUSING STANDARD FEATURES
• Stainless steel hardware
• Hinge pins; detent-type clevis or roll
• Eye bolt/wing nuts; latch mTJ.
+I
• Terminal block with quick-disconnect fittings on one side of each terminal position and screw clamps on the other side
Ii:= 13.S" =-ii � 14.8" ____:.i
SIDE
TOP
2.0·
I �s.7• � j-1u"-j
1-- 12.4' -l
15.8
�-9.1-l f- 7.3
17.4
I- 10.0 -l
OPTIONS
• Polycarbonate 10% fiberglass fill for added durability2
• Custom terminal blocks
• Door hardware: permanent or removable3
• LED modules
• International Hand/Man symbol
• "WALK"/ "DON'T WALK" words
• Visors
• Vantage visor (16" only)
• Tunnel
• Cap (12" only)
• Clamshell mount4
16" Clamshell Mount 16" Vantage Visor 16" Tunnel Visor
GENERAL SPECIFICATIONS
12" Housing 16" Housing
Dimensions':
Housing: 13.2"W x 13.2"H x 5. 7"D 17.4"W x 15.8"H x 7.3"0 Door: 15"W x 13.5"H x 5.6"0 18.5"W x 18.7"H x 1.8"0 Overall: 15"W x 14"H x 11.3"0 18.5" W X 18.7"H X 9.1"0
Material: Aluminum: Type 360, reduced corrosion, increased powder coat adhesion
12" 2-section with Tunnel Visors
Hand/Man Module
Polycarbonate: Ultraviolet and heat stabilized, flame retardant, permanently colored, 10% fiberglass reinforcement•
Finishes: Aluminum: Powder coated I Polycarbonate: Colored resins integral to housing
Colors: Federal yellow, signal green, black, or custom colors
Access•: Hinged left or right Hinged top or bottom
Latching System: Eye bolt assemblies
Mounting: Standard signal hardware
Environmental: Operating Temperature: -37°C to +74•c
Weight: Aluminum: 9 lbs I Polycarbonate: 5 lbs
'With Vantage Visor "' on 16" housing 'Standard 011 12" housing; optional on 16" housing 3Permanent with roll pins or removable with clevis pins 'For 16" housing only; housing available pre-drilled for mount 'Dimensions are approximate and vary based on material used: door dimensions include tabs 'Front door access
'WVl'INSV/i.11 c.o c.orn/r ,v�ca1n
SWAf:KO 1F.-serves th� 1i!Jhl to ,nak� r:hanyes al any tunr:' 1n order to supply the bcs.t prwlur.t po:.siblP.
r>SWARCO l�cCi,in. Inc. Ur,dal,'d 11/07/2022
I Humidity: 0 to 95% (non-condensing)
Aluminum: 10 lbs I Polycarbonate: 9 lbs swarcon cr a:
ITEM 217,218,219 AND 220
ITEM 221
Description LEOTEK Frontier 16" x 18" Countdown Pedestrian Signal
Modules are designed for reliable, high-visibility pedestrian communication at crosswalks. Fully compliant with the latest ITE
PTCSI Part 2: LED Pedestrian Traffic Signal Modules standard, these modules provide clear countdown and symbol displays to enhance pedestrian safety and intersection efficiency.
Each module is built with separate power supplies for the hand and walking person icons, ensuring stable and independent operation. Advanced surge protection is integrated into the circuitry to guard against both high-frequency noise and high energy transients, meeting key requirements from NEMA TS
2-2003, IEC 61000-4-5, ANSI/IEEE C62.41-2002, and IEC 61000-
4-12. With rigorous third-party testing and a focus on long-term durability, LEOTEK's pedestrian modules offer dependable performance for modern traffic control applications.
Symbol Color
Features & Benefits
• Fully compliant to ITE PTCSI LED Pedestrial Traffic Signal Module
Specification dated August 4, 2010
• Meets or exceeds ITE uniformity ration of not more than 1 to 5 between the max and the min luminance values as measured in
(.5") dia spots
• Manufactured with anti-capillary wires
• Conformal coated power supply
• Fuse and transient suppressor incorporated for superior line and load protection
• Independent dedicated power supplies for added safety and reliability
• lntertek / ETL certified and listed on ETL certification program
• Transient suppression exceeds ITE and NEMA specifications
(up to 6KV ring wave)
• All units operate at 80 -135 V AC RMS, 60+/-3 Hz
• CSA C22.2 No. 250.13:22
• UL 8750, 2nd Edition
Typical Wattage at 25 •c Min Luminance (cd/m2) Part Number Size
Countdown Hand Person Countdown Hand Person Countdown Hand Person
430-64 79-00lX 16 X 18 Portland Portland Lunar
5 8.7 8.9 1,400 Orange Orange White
,.__ ____ [17,9"] __ _
© 2025 LEOTEK Electronics USA LLC.
16" Traffic Pedestrian Signals Specification Sheet 7-10-25. All specifications are subject to change without notice.
1,400 2,200
[INCH]
mm
ITEM 222
ITEM 223
ITEM 224
ITEM 229
ITEM 230
ITEM 231
ITEM 232
ITEM 223
ITEM 235
Ped Safety
PUSH OR
WAVE AT
BUTTON
FOR
D
PedConnex® Utility & App
PedConnex® makes updates, data extraction, and programming straightforward and effortless
Secure USB-C connection through the utility for faster upload speed
, iOS and Android apps available
A Campbell Company
Guardian® Wave
Independent APS Place a call with the wave of a hand through infrared sensors
Three selectable detection ranges of 1-3, 1-6, or 1-9 inches
No equipment in the cabinet
Standard USB utility with optional Bluetooth® add-on interface
Save, share, and upload settings and profiles with our
PedConnex® mobile app and desktop utility
Programmed at the factory for true plug-and-play installation
Quiet signal technology allows for sound directionality and specific time-of-day volume leveling
Compatible with both 120V and 48V cabinets
Low power consumption works with RRFB and solar applications
Pairable with our Audible Beacon Device for true destination beaconing
PedConnex® utility and Mobile App
ITEM 236
ITEM 237
ITEM 238
ITEM 239
ITEM 244
Test Equipment for Traffic Signal Control Systems
Athens Technical Specialists, Inc.
Home Downloads Online ShoP- About Us
PCMT 8800
Conflict Monitor Tester
Contact Us
[ - . 1 [ - -�',.. n,' . ::, . . '- . _, ] I ,s � l [ � ,._ lEJBG
The PCMT-8800 performs comprehensive testing of various types of conflict monitors to ensure that they are functioning in accordance with the requirements of the applicable oublished standard.
The following monitor types may be tested:
l\l���llTC1 '.:l c=_ 1,1Q,h-::,nnol
We're offline Leave a message
• C !· � ·r· '"t x •, -MiWH+eiUMWf#IMi¥fM1W·FM#MIHM MIINF�H ML� H
ITEM 248
ITEM 247
G TECHNOLOGY
MODEL 578F-l LED TE T DISPLAY Trust your Cabinets on the Street iiii iill Al •
4p � 6P • ■UP """4" 2P a ■
Test & Troubleshoot Your Traffic Signal Cabinets
Mitchell LED test displays provide a compact and very convenient way to monitor traffic signal cabinets for performance, demonstration, testing and burn-in periods. The 578F-1 model is for a standard 8-phase intersection with flashing yellow arrows and can hang from the cabinet door or be placed on the top/bottom of the cabinet. This model is available with a standard 8ft cable or a "A" option cable which incorporates a breakout connection, that allows the display to be transferred between cabinets without removing cabinet connections.
Features
• Super bright and easy-to-see LED lights.
• 30-volt threshold to prevent lighting from load switch leakage.
• 2K, 10-watt loads, each circuit.
• Internal heat sink.
• Eight-foot color-coded leads.
• Special order lengths available.
• Customizable.
• Specs: H =7.5", W = 10.4", D=3.8"
(i;l 425.438.1133 @) lnfo@WesternSystems-inc.com («ID) www.MitchellTechnology-inc.com
ITEM 249,250,251 AND 252
ITEM 249,250,251 AND 252
File details come from the government source that posted it. Updated .