Price Line 40 Playground Surfaces - Safety Turf Price List 2025.pdf

Safety Turf, Inc. & Fall Zone, Inc.

2025 Price Sheet

Date: 8/6/2024 Rev. A

RE: Safety Turf Cost- 2025 (Using EPDM for the Wearing Course)

*Fall Height

(FT)

Compacted Stone (2B- 3/4 Clean) Sub-base

*Fall Height (FT) Concrete or

Asphalt Sub-base

Color - Thickness

500 SF –

999 SF

1000 SF-

1499 SF

Over

1500 SF

5’ 4’ 50/50 – 2” $14.75 $14.00 $13.25 5’ 4’ 100% - 2” $16.25 $15.50 $14.75 7’ 5’ 50/50 – 2 ½” $15.00 $14.25 $13.50 7’ 5’ 100% - 2 ½” $16.50 $15.75 $15.00 8’ 6’ 50/50 – 3” $16.00 $15.25 $14.50 8’ 6’ 100% - 3” $17.50 $16.75 $16.00 9’ 7’ 50/50 – 3.5” $16.75 $16.00 $15.25 9’ 7’ 100% - 3.5” $18.25 $18.50 $16.75

10’ 8’ 50/50 – 4” $17.50 $16.75 $16.00 10’ 8’ 100% - 4” $19.00 $18.25 $17.50 13’ 11’ 50/50 – 5” $19.00 $18.25 $17.50 13’ 11’ 100% - 5” $20.50 $19.75 $19.00

* ASTM F 1292-22 Standard was used to determine these “Fall Heights” when tested by TUV SUD America, Inc.

The “Fall Height, Compacted Stone (2B-3/4” Clean Sub-Base)” was determined for the PIP System installed over a minimum of 4” deep, 2B-¾” Clean Stone. Any other stone sub-base (e.g., modified or screenings) should use the “Concrete or Asphalt Sub-base” Fall Heights. If the surface will require a drop test per the ASTM F 3313 testing procedure, please use the surface thickness, as shown, for the concrete or asphalt sub-base.

Please Note: On-site testing of the surface per ASTM F 1292, and ASTM F3313-20 Field Testing Procedures, may determine different “Fall Heights” than the laboratory test determination. Safety Turf, Inc. recommends that the specifier be aware of this when specifying thicknesses of the playground safety surface. Actual site conditions may vary from laboratory conditions.

Additional Cost for Projects with more than One Color Pattern (e.g., Waves, tracks, borders):

Under 500 SF 501 SF –

1499 SF

1500 SF –

2999 SF

3000 SF -

3999 SF

Over 4000 SF

Two Color Patterns Contact Us $1.25 / SF $0.75 / SF $0.50 / SF NC Three Color Patterns Contact Us $1.75 / SF $1.00 / SF $0.75 / SF $0.50 / SF Four Color Patterns Contact Us $2.25 / SF $1.25 / SF $1.00 / SF $0.75 / SF

Additional Notes:

A. For projects that are classified under “Prevailing Rate”, the additional cost will be:

a) $3.00/ SF for Philadelphia, Montgomery County, Bucks County, South NJ, North NJ.

b) $2.50/ SF for Delaware (all counties).

c) $2.25/ SF for Dauphin County, PA; Cumberland County, PA; Lancaster County, PA; Berks County, PA; Northampton

County, PA; Lehigh County, PA.

d) Contact us for any project that is “Prevailing Rate” that is not listed above.

B. Contact us for pricing on projects Less than 500 SF.

C. For Projects North of Trenton, NJ and South of Dover, DE add $.50/SF to the above Costs.

D. There will be additional charges for designs, Please Contact us.

E. There may be additional charges for projects over 100 miles from Royersford, PA, Please Contact us.

F. The additional cost for Aliphatic Binder, used in the wearing course, is $4.00 SF.

G. Extra Charge for Premium Color is $1.25 SF H. Pricing may be updated as conditions require.

I. If Security is required, the additional cost will be a minimum of $250.00 per day.