Attachment_6_Product_Cutsheets.pdf

NORTH CASCADES NATIONAL PARK

NOCA PMIS No.157311

Stehekin Golden West Visitor Center

Window Rehabilitation and Replacement

CD

PRODUCT CUTSHEETS

NATIONAL PARK SERVICE

PACIFIC WEST REGION

MAY 31, 2016

NOCA -157311

May 16, 2016

TABLE OF CONTENTS

Division 07 -- Thermal and Moisture Protection

07 25 00 - Weather Barriers

07 62 00 - Sheet Metal Flashing and Trim

07 92 00 - Joint Sealants

DuPont Flashing Systems

PHYSICAL PROPERTIES DATA SHEET

Product Data

PROPERTIES DUPONT™ FLEXWRAP™ NF DUPONT™ FLASHING TAPE

Face Sheet Micro-creped, polyethylene laminate (white) Polypropylene film

Adhesive* Butyl Rubber (black) Butyl Rubber (black)

Thickness 64 mil (1,620 microns) 20 mil (507 microns)

Release Liner 1-piece, heavy-duty siliconized paper for 6-inch width product; 2-piece, heavy-duty siliconized paper for 9-inch width product

1-piece, heavy duty siliconized paper for 4, 6, 9-inch width product;

3-piece, heavy-duty siliconized paper for 12-inch width product.

Dimensions 6- or 9-inch width x 75 feet length 4, 6, 9, or 12-inch width x 75 ft

Applications Round top or custom shaped windows, 3-D sill protection, wall interruptions: i.e. dryer vents, hose bibs. Suitable for use on substrates where fasteners cannot be applied.

Jambs and heads of rectangular windows and doors.

UV Resistance Cover in 270 days Cover in 120 days

PROPERTIES DUPONT™ STRAIGHTFLASH™ DUPONT™ STRAIGHTFLASH™ VF

Face Sheet Spunbonded polyethylene laminate (white) Spunbonded polyethylene laminate (white)

Adhesive* Butyl rubber (black) Transposed dual sided adhesive for continuous integration; Butyl rubber (black)

Thickness 30 mil (760 microns) 30 mil (760 microns)

Release Liner 2-piece, heavy-duty siliconized, scored release paper

2-piece, heavy-duty siliconized, scored release paper

Dimensions 4-inch width x 150 feet length 9-inch width x 125 feet length

6-inch width x 125 feet length

Applications Jambs and heads of rectangular windows. Brick mold, non-integral flanged and non-flanged rectangular windows and doors.

UV Resistance Cover in 270 days Cover in 270 days

* Adhesive system is based on 100% butyl elastomer with no asphalt/modified bitumen components.

Performance Testing

INSTALLED SYSTEM WATER INTRUSION TESTING (Tested with no exterior cladding)

ASTM E-331 NO leakage at 300 Pa ASTM E-331 after thermal aging (0-120°F) NO leakage at 300 Pa

WATER VAPOR PERMEABILITY (ASTM E-96) < 1 perm (< 60 ng/Pa.sec.m2)

APPLICATION TEMPERATURE Best when installed above 25°F (consult DuPont for primer recommendations)

DUPONT FLASHING SYSTEMS PRODUCTS MEET THE Class A (no primer) AAMA 711-13 MATERIAL STANDARD AT THE HIGHEST CLASSIFICATION LEVELS: Level 3 Thermal Exposure (80°C/176°F for 7 days)

For more information about DuPont Flashing Systems, please visit us at www.Construction.Tyvek.com or call 1-800-44-Tyvek

Copyright © 2016 E.I. du Pont de Nemours and Company. All rights reserved. The DuPont Oval Logo, DuPont™, FlexWrap™, and StraightFlash™ are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. K-25126-1 3/16

WARNING: DuPont Flashing Systems products and their release paper are slippery and should not be walked on. Remove release paper from work area immediately.

DuPont Flashing Systems products are combustible and should be protected from flame and other high heat sources. If the temperature of DuPont Flashing Systems products reach 700°F (307°C) they will burn and the fire may spread and fall away from the point of ignition.

TECHNICAL DATA SHEET

DUPONT™ TYVEK® COMMERCIALWRAP®

A DURABLE, HIGH PERFORMANCE WEATHER BARRIER ENGINEERED

SPECIFICALLY FOR COMMERCIAL CONSTRUCTION

PRODUCT INFORMATION–FEATURES/BENEFITS

Air and Water Barrier Performance

• Offers the ideal combination of air and water holdout plus vapor permeability.

• Air Barrier Association of America evaluated to exceed ABAA, ASHRAE 90.1 and IECC air leakage requirements when tested in accordance with ASTM E2357.

Ease of Installation

• Easily installed, prior to the building’s exterior facade, to help protect against air and water infiltration.

High Performance Durability

• Offers high tear-resistance and high wind-load-resistance to help stand up to commercial construction site conditions.

• Withstands up to nine months of UV exposure.

Sustainable Solutions

• DuPont™ Tyvek® CommercialWrap® may contribute toward LEED® points in the areas of Energy and Atmosphere (EA): Optimizing the Building Envelope and Indoor Environmental Air Quality (EQ): Construction IAQ Management Plan and Low Emitting Materials. In addition, the use of a continuous air barrier is a prerequisite for LEED® applications requiring compliance with ASHRAE 90.1-2010.

• By helping to effectively seal the building envelope, Tyvek® CommercialWrap® helps to reduce the amount of energy required for heating and cooling

Complete System Tyvek® CommercialWrap® can be integrated with DuPont self-adhered flashing products and Tyvek® Fluid Applied products to offer seamless protection for wall systems that require mechanically fastened and fluid applied air and water barriers.

DESCRIPTION

Engineered to provide excellent performance as an air and water barrier, Tyvek® CommercialWrap® delivers the added strength and durability needed in commercial construction. As a part of DuPont™ Tyvek® Commercial Air and Water Barrier Systems, Tyvek® CommercialWrap® can easily be integrated with other system components to provide superior air and water hold-out with high tear-resistance, high wind-load resistance and 9-month UV resistance. It provides the best balance of air and moisture management resulting in more durable and energy efficient structures.

Tyvek® CommercialWrap® is backed by a 10-year limited warranty and industry-leading technical support.

TYPICAL PROPERTIES (APRIL, 2015)

Please contact your local DuPont™ Tyvek® Specialist before writing specifications around this product. Product properties are as follows.

Test Method Property Unit Value

ASTM E2357 Air Penetration Resistance cfm/ft2 @ 1.57 psf <0.01

Gurley Hill (TAPPI T-460) Air Penetration Resistance sec/100cc >1500

ASTM E1677 Air Penetration Resistance cfm/ft2 @ 1.57 psf Type 1

ASTM E2178 Air Penetration Resistance cfm/ft2 @ 1.57 psf .001

ASTM E283 Wall Assembly Air Penetration Resistance cfm/ft2 @ 1.57 psf <0.01

ASTM E96-00 Water Vapor Transmission Method A g/m2-24 hrs 163

ASTM E96-00 Water Vapor Transmission Method A (perms) 23

ASTM E96-00 Water Vapor Transmission Method B g/m2-24 hrs 200

ASTM E96-00 Water Vapor Transmission Method B (perms) 28

AATCC 127 Water Penetration Resistance cm 280

ASTM E331 Wall Assembly Water Penetration Resistance Tested to 15 psf No leakage

TAPPI T-410 Basis Weight oz/yd2 2.7

ASTM D882 Breaking Strength lbs/in 38/35

ASTM D1117 Tear Resistance lbs 12/10

ASTM E84 Surface Burning Characteristics Flame Spread Index Class

Class A

ASTM E84 Surface Burning Characteristics Smoke Developed Index Class

Class A

NFPA 285 Flame Propagation/Multiple Assemblies – Pass

Ultra Violet Light Exposure (UV) Days Months

Test results shown represent roll averages. Individual results may vary either above or below averages due to normal manufacturing variations, while continuing to meet product specifications

TECHNICAL DATA SHEET

DUPONT™ TYVEK® COMMERCIALWRAP®

A DURABLE, HIGH PERFORMANCE WEATHER BARRIER ENGINEERED SPECIFICALLY FOR COMMERCIAL CONSTRUCTION

PRODUCT DESCRIPTION

Tyvek® CommercialWrap® is made from 100% flash spunbonded high density polyethylene fibers which have been bonded together by heat and pressure, without binders or fillers, into a tough durable sheet structure.

Additives have been incorporated into the polyethylene to provide ultraviolet light resistance.

INSTALLATION/USE INSTRUCTIONS

Please refer to DuPont Installation Guidelines for complete instructions.

Safety Precautions for Use Tyvek® CommercialWrap® is slippery and should not be used in any application where it will be walked on. In addition, DuPont recommends using kick jacks, scaffolding, or lifts for exterior work above the first floor.

If ladders must be used, extra caution must be taken to use them safely by following the requirements set forth in ANSI Standards 14.1, 14.2, and 14.5 for ladders made of wood, aluminum, and fiberglass, respectively.

Tyvek® CommercialWrap® is combustible and should be protected from flames and other high heat sources.

Tyvek® CommercialWrap® will melt at 275°F (135°C) and if the temperature of the product reaches 750°F (400°C), it will burn and the fire may spread and fall away from the point of ignition. For more information, call 1-800-44-Tyvek.

Preparation No surface preparation is needed for the installation of Tyvek® CommercialWrap®.

TESTING/CODE COMPLIANCE

Moisture Protection – Weather-Resistant Barriers The 2012 International Building Code (IBC, Section 1403.2 Weather Protection) requires that exterior walls shall provide the building with a weather-resistant exterior wall envelope. This shall include flashing, as described in Section 1405.4. Tyvek® CommercialWrap® and where applicable, DuPont self-adhered flashing and accessory products, have been tested and meet weather-resistant barrier codes and standards requirements. The following test methodologies were used:

• ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Pressure

• ASTM E2556 Standard Specification for Vapor Permeable Flexible Sheet Water-resistive Barriers intended for mechanical attachment

• ASTM E96-00 Standard Test Methods for Water Vapor Transmission of Materials; Water resistive barriers are typically vapor permeable, which is generally desirable because it allows for drying of incidental moisture intrusion into the wall assembly

• AATCC 127 Hydrostatic Head Test for water-resistant barrier materials, measuring pressure to failure or time of failure at a given pressure

Air Leakage Control — Air Barriers ASHRAE 90.1 2010 (American Society of Heating, Refrigerating and Air-Conditioning Engineers) requires that the entire building envelope shall be designed and constructed with a continuous air barrier. This is a mandatory provision for the building envelope. IECC 2012 (International Energy Conservation Code) for commercial buildings also requires a continuous air barrier. These codes are being adopted in many states across the United States. Tyvek® CommercialWrap and where applicable, DuPont self-adhered flashing and accessory products have been tested and meet air barrier codes and standards requirements. The following test methodologies were used:

• ASTM E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

• ASTM E1677 Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls

• ASTM E2178 Standard Test Method for Air Permeance of Building Materials

• ASTM E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls and Doors Under Specified Pressure Differences Across the Specimen

Other

• ASTM E 84 Standard Test Method for Surface

Burning Characteristics of Building Materials

• NFPA 285 Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components

Tyvek® CommercialWrap®, in conjunction with DuPont self-adhered flashing and accessory products, have been evaluated according to Air Barrier Association of America (ABAA) protocol and are listed at the ABAA website under “ABAA evaluated Air Barrier Assemblies”, www.airbarrier.org

NOTICE

Tyvek® CommercialWrap® should be covered with the facade within nine months to limit UV exposure. Follow facade manufacturer’s installation and maintenance requirements in order to maintain water holdout.

MATERIAL STORAGE/DISPOSAL

Tyvek® CommercialWrap® should be stored in a clean, dry environment.

PACKAGING

Tyvek® CommercialWrap® is available the following roll sizes:

• 5’ x 200’ (1.5 x 61m)

• 10’ x 125’ (3.1 x 38.1 m)

WARRANTY

Backed by a limited product warranty, see www.weatherization.tyvek.com.

Copyright © 2015 E. I. du Pont de Nemours and Company. All Rights Reserved. The DuPont Oval Logo, DuPont™, The miracles of science™, CommercialWrap® and Tyvek®, are registered trademarks or trademarks of E.I. du Pont de Nemours and Company or its affiliates. K-27289-1 (5/15)

Se ala nt Se lec tio n G uid e

Sealant Selection Guide

/S

EA

LS

G

Tr em co C om m er ci al S ea la nt s

W at er pr oo fi ng

G re en R oa d, B ea ch w oo d, O H

P ho ne : 2

.2

.5

0.

1.

W ick st ee d Av en ue

, T or on to

, O N

M 4H

G7

P ho ne

: 4

.4

.3

0.

3.

Ja co bs on

A ve nu e, A sh la nd

O H

Ph on e:

.2

.2

0.

1.

w w w .tr em co se al an ts

.c om

Ch em ist ry

U U

U H

U U

U U

U S

S S

S S

S S

S S

S S

S A

B B

T C

No n-

Sa g or P ou ra bl e

NS

P

NS

NS

NS

P

NS

NB

S P

NS

NS

NS

NS

NS

P

NS

NS

NS

NS

NS

NS

NS

NS

NS

Si ng le

- o r M ul ti-

Co m po ne nt S

S S

S S

M S

M M

S S

S M

S S

S

S S

S S

S S

S S

SW

RI

Ye s Ye s Ye s

GR

EE

NG

UA

RD

G ol d Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s Ye s M ov em en t C ap ab ili ty

+1

/-5

0%

0/-

±3 5%

±2 5%

+1

/-5 0%

±0

5% ±5

0% ±2

5% +1

/-5

0% ±5

0% ±5

0% ±5

0% +1

/-5

0% +1

/-5

0% ±2

5% ±2

5% ±2

5% ±2

5% ±2

5% ±1

2.5 up to

±1

2.5

M as on ry

Po ur ed C on cr et e

Ca st -in

-P la ce

Til t-U p

CM

U Bl oc k

Br ick

Na tu ra l S to ne

St uc co

Re se rv oi r‡

M et al s

Cu rta in W al ls

Fl as hi ng

Si di ng s

W in do w a nd D oo r P er im et er s

EI

FS

Vi ny l a nd

P la st ic s

Gr ee n an d

Da m p Co nc re te

Gl as s

W oo d

Dr yw al l ( Gy ps um

M et al

S tu d Pa rt iti on

Ge ne ra l G la zi ng To e Be ad

He el B ea d

Ca p

Be ad

W ea th er S ea l

Be dd in g

St ru ct ur al

G la zi ng

Te ns ile B ea d

-S id ed

Te ns ile

B ea d

-S id ed

Pr ot ec tiv e

Gl az in g

Hu rri ca ne

/Im pa ct

Bo m b

Bl as t

Tu b an d

Til e

/ S an ita ry

Je t F ue l R es ist an ce

Le ge nd

U

Ur et ha ne

H

Hy br id S

Si lic on e S*

P re fo rm ed

S ili co ne

Ta pe

B

Bu ty l T

Th er m op la st ic

A

A cr yli c

C

P re

-C om pr es se d, S el f-E xp an di ng Jo in t S ea l

O = O th er

NS

N on

-S ag

P

P ou ra bl e S

S in gl e- Co m po ne nt

M

M ul ti- Co m po ne nt

Th e Se al an t S el ec tio n Gu id e sh ou ld o nl y b e us ed a s a g ui de

. R ef er en ce th e Da ta S he et fo r m or e sp ec ifi c i nf or m at io n an d/ or co ns ul t y ou r l oc al Tr em co

R ep re se nt at ive o r T ec hn ica l S er vic es

M od ifi ed A

ST

M

C

Pr od uc t n ot fo r u se in th e

Un ite d St at es

Illm od ca n be u se d in n on

-im m er se d ap pl ica tio ns w he re th er e i s n o po nd in g wa te r a nd a s a se co nd ar y s ea l in tr af fic jo in ts.

Fo r u se in n on -tr ea te d, n on -p ot ab le w at er.

Fo r p rim in g re co m m en da tio ns

, p le as e co nt ac t T re m co Te ch ni ca l S er vic es o r r ef er en ce th e Pr im er

G ui de o n ou r w eb si te

Vulkem 116 Vulkem 45SSL Dymonic 1

Dymonic F

C Dymonic

Vulkem 445SSL Dymeric 240** Dymeric

240FC THC 901

Spectre m 1

Spectre m 2

Spectre m 3

Spectre m 4-TS Spectre m 800 Spectre m 900SL Simple Seal

Tre msil 2

Tre msil 6

Proglaze SSG Proglaze II Proglaze

Tre mflex 834

Butyl Sealant Acoustic al Sealant Tre mco 830 Illm od 600***

NOCA -157311

May 16, 2016

TABLE OF CONTENTS

Division 08 -- Openings

08 0152 - Wood Window Restoration

08 14 33 - Stile and Rail Wood Doors

08 52 00 - Wood Windows

08 52 68 - Interior Storm Windows (Bid Option 2)

08 52 69 - Custom Interior Storm Windows

08 71 00 - Door Hardware (Pending)

Primed and painted exterior

Interlocking Weatherstrips

Check up to five results to perform an action.

All bronze is 0.020" thick unless noted heavier

Stock sizes; 32",36",42",48",60",72",86",96" plus 1/2"--corrugations measure 1/16" in height

Looking for Spring Bronze? Goto Hinge Door Weatherstrip-Spring Type

Accurate Metal Weatherstrip Co.

725 S.Fulton Avenue

Mount Vernon, NY 10550-5013

Toll Free: 800.536.6043

Phone: 914.668.6042

Fax: 914.668.6062

E-Mail: Info@AccurateWeatherstrip.com

Web site: www.weatherstrip.thomaswebs.net

All Categories > Interlocking Weatherstrips > View Items

Interlocking Weatherstrips On Accurate Metal Weatherstrip Co. http://metalstrips.accurateweatherstrip.com/printitems/all-categories/inter...

1 of 5 8/28/2015 1:15 PM

Results 1 - 25 of 33 1 2

Item # Item Name Material Image Thickness

1 Plain Rib Strip 1" Base Bronze

Zinc

1_1 larger image

0.018

2 Plain Rib Strip 1 3/8" Base Bronze

Zinc larger image

0.018

2C Side Strip 1 3/8" Base Bronze

Zinc

2C larger image

0.018

2CH Side Strip 1 3/8" Base Bronze

Zinc

2CH

larger image

0.018

3 Plain Rib Strip 1 5/8" Base Bronze

Zinc larger image

0.018

3C Side Strip 1 5/8" Base Bronze

Zinc

3C larger image

0.018

3CH Side Strip 1 5/8" Base Bronze

Zinc

3CH

larger image

0.018

4C Side Strip 1 7/8" Base Bronze

Zinc

4C larger image

0.018

Interlocking Weatherstrips On Accurate Metal Weatherstrip Co. http://metalstrips.accurateweatherstrip.com/printitems/all-categories/inter...

2 of 5 8/28/2015 1:15 PM

4CH Side Strip 1 3/4" Base Bronze

Zinc

4CH

larger image

0.018

5C Side Strip 2 1/4" Base Bronze

Zinc

5C larger image

0.018

5CH Side Strip 2 1/8" Base Bronze

Zinc

5CH

larger image

0.018

6 Plain Rib Strip 2 1/8" Base Bronze

Zinc larger image

0.018

7 Meeting Rail Hook Bronze

Zinc larger image

0.02

7S Meeting Rail Hook Bronze

Zinc

7S larger image

0.02

8 Meeting Rail Flat Bronze

Zinc larger image

0.018

8C Meeting Rail Flat Bronze

Zinc

8C larger image

0.018

Interlocking Weatherstrips On Accurate Metal Weatherstrip Co. http://metalstrips.accurateweatherstrip.com/printitems/all-categories/inter...

3 of 5 8/28/2015 1:15 PM

11A Side Strip Liner & Channel

Zinc

11A larger image

0.018

0.045

11 Side Strip Simplex Type Bronze

Zinc larger image

0.018

12 Sill Strip Bronze

Zinc larger image

0.045

17 Regular Single Base Bronze

Zinc

17_1 larger image

0.02

17N Narrow Single Base Bronze

Zinc

17N_1 larger image

0.02

17S Wide Single Base Bronze

Zinc

17S_1 larger image

0.02

17A Heavy Single Base Bronze

Zinc

17A larger image

0.028

18 Surface Interlock Bronze

Zinc larger image

0.02

Interlocking Weatherstrips On Accurate Metal Weatherstrip Co. http://metalstrips.accurateweatherstrip.com/printitems/all-categories/inter...

4 of 5 8/28/2015 1:15 PM

19A Surface Interlock

Zinc

19A larger image

0.018

Results 1 - 25 of 33 1 2

Interlocking Weatherstrips On Accurate Metal Weatherstrip Co. http://metalstrips.accurateweatherstrip.com/printitems/all-categories/inter...

5 of 5 8/28/2015 1:15 PM

LIMITED COMMERCIAL WARRANTY

R Value, Inc. doing business as Indow (‘‘Indow’’) warrants its window inserts, not otherwise covered by its Limited Residential Warranty, against defects of materials or workmanship for ten

(10) years from the date of purchase.

Exclusions This warranty does not apply to any Indow window insert which has been subject to accident, acts of God, fire, flood, abuse or misuse, abuse by harmful fumes, vapors, solvents, chemicals or chemical pollutants in the atmosphere, mold, building settlement or structural failures of walls or foundations. We do not warrant our glazing against scratching or breakage which can occur if improperly handled. We do not warrant our acrylic glazing against clouding, yellowing or loss of light transmission caused by dirt, scratching, breakage, or improper cleaning with ammonia or bleach based cleaners.

Glazing and Tubing Indow uses only the highest quality materials in the manufacture of our products. Indow warrants its clear acrylic glazing against a change in light transmission in excess of 3%. This does not cover certain specialty grades that are not clear to start with (including Blackout, Privacy and Shade Grades), nor clear acrylic glazing exposed to artificial light sources emitting intense amounts of UVB or higher energy radiation. The Indow compression tubing is made of silicone which resists the effects of heat, cold and ultraviolet exposure.

Condensation Condensation is not a product defect, but the result of excess humidity. Condensation, frost, or mold, mildew, or fungus on window surfaces is not covered by the Limited Warranty. Indow bears no responsibility or liability for any situation where molds or other associated conditions arise as a result of improper use, cleaning, sealing, humidification or ventilation.

Venting Indow does not warrant its window inserts against venting excess air pressure. It is part of an Indow window insert’s normal function to occasionally relieve excess air pressure by ‘popping’ a corner or side in response to heavy external winds combined with extreme temperatures or a blower door test. Simply press the window insert back into place to restore normal function.

Window Opening Control Devices Window Opening Control Devices (WOCDs) are not a substitute for careful supervision of children.

WOCDs must be tested at least monthly. Follow all safety information and instructions provided with WOCDs.

Indow will not pay for any incidental or consequential damages, and its liability under this warranty, or under any implied warranty, is limited to repairing or replacing (in our sole discretion) any part or parts of the window insert that are found to be defective under the terms of this warranty. We will endeavor to supply original replacement parts; however, replacement parts may differ from the original parts. Warranty repair or replacement of the Indow window insert is free of charge to you. In the case of improper cleaning, storage or maintenance, Indow will not be held responsible for any costs incurred in repairing or replacing any product under this warranty including, but not limited to, transportation costs, costs of removal, disposal, installation or reinstallation.

Approved care, cleaning and installation instructions are available on the Company’s website at www.indowwindows.com/care.

To make a claim If you discover a defect of materials or workmanship during the warranty period, please contact Indow. Upon providing proof of purchase, Indow in its sole discretion, will repair or replace your defective Indow window insert(s). This limited warranty is effective for products purchased on or after January 1, 2015.

HARDWARE SETS

HARDWARE SET 01: DOOR 101C:

QTY DESCRIPTION CATALOG NUMBER FINISH MFR

1-1/2 PR BEARING HINGE 4-1/2” BRS MCK

1 EA CLOSER 4020T-HINGE SIDE MOUNTED ABOVE DOOR 643 LCN

1 EA MORTISE LOCKSET L9453C W/ M55A LEVERS 643 SCH

1 EA SFIC CORE 80-033 613 SCH

1 EA KICK PLATE 8400 10" X 2" LDW B-CS 643 IVE

1 EA GASKETING 188S-BK S-BK ZER

1 EA DOOR BOTTOM 3452_V D PEM

1 EA WOOD THRESHOLD 1/2” X 3-1/4” RED OAK WD

HARDWARE SET 02: DOOR 104G:

QTY DESCRIPTION CATALOG NUMBER FINISH MFR

3 PR BEARING HINGE 4-1/2” NON-REMOVABLE PIN BRS MCK

1 EA PANIC DEVICE 3550AWDC-NL-OP 643E VON

1 EA PANIC DEVICE 3550AWDC-EO 643E VON

1 EA RIM CYLINDER 20-057 (VERIFY EXISTING) 613 SCH

1 EA FSIC CORE 23-030 (VERIFY EXISTING) 613 SCH

2 EA DECORATIVE PULL 8190 10” 643E IVES

1 EA SURF. AUTO 9553 REG/STD MS OPERATOR ANCLR LCN

PUSH SIDE MOUNT

2 EA ACTUATOR KIT 8310-3855WF 628 LCN

2 EA RECEIVER 8310-865 BLU LCN

1 EA ACTUATOR BOLLARD HSS 3 X 3 X 1/8” W/ CAP, PAINT TO MATCH RAILING,

MOUNT TO SIDE OF EXISTING CONCRETE LANDING

AS DRAWINGS INDICATE

2 EA KICK PLATE 8400 10" X 30" LDW B-CS 613 IVE

1 EA GASKETING 188S-BK S-BK ZER

1 EA MEETING STILE SEALS S771 BRN PEM

1 EA THRESHOLD 2001_T D PEM

1 EA KEY SWITCH 653-14 L2 613 SCE

DAYTIME OPERATION: TURN ON OPERATOR WITH KEY SWITCH. DOGGING

LATCH BOLTS FOR PUSH/PULL FUNCTION ONLY.

NIGHTTIME OPERATION: TURN OFF OPERATOR WITH KEY SWITCH. UNDOGGING

LATCH BOLTS ALLOWING NORMAL PANIC DEVICE FUNCTION FOR EGRESS FROM

INTERIOR.

NOTE: Contractor to provide raceway and power to operator from existing electrical panel as required by manufacture for proper operation. Route new 3/4-inch diameter EMT raceway in basement as drawings indicate.

26 • Von Duprin 33A/35A Series

A W D C /3

A W D C C o nc ea le d v er tic al c ab le d ev ic e

3350AWDC/3550AWDC Wood door concealed vertical cable device

3350AWDC and 3550AWDC for use on single and double wood doors, UL listed for panic exit hardware. Devices are ANSI A156.3 – 2008 Grade 1. The 3549A has a smooth mechanism case and the 3350AWDC has grooved case. The concealed vertical cable device is non-handed except when the SS (signal switch) option is used. See opposite page for available outside trim and device functions.

3350AWDC/3550AWDC fits door stiles as narrow as 2 1/8" (44 mm).

Scalp Plate – Device is furnished standard with an 15" (381 mm) long scalp plate for easy access to cables.

Finishes – US3, US3A, US4, US4A, US10, US15 (3550AWDC Only), US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 and 643E.

CD

Cylinder dogging

• Replaces hex key dogging

• Requires standard

1 1/4" mortise cylinder

E (E360L) Electric lever trim

• Electrified remote locking/unlocking

• Fail safe & fail secure options available

• No key override

PN

Pneumatic latch retraction

• For areas where electrical devices banned

• Special linkage for mechanical or pneumatic dogging

EL

Electric latch retraction

• Enables remote unlatching

• Alternative to manual dogging

QEL

Quiet electric latch retraction

• Bolt retraction via switch

• Converts exit door to push-pull operation

RX

Pushpad monitor switch

• Signals use of an opening

• SPDT switch to monitor pushpad

ALK

Alarm exit kit

• Unauthorized opening triggers 85-decibel horn

• Set in armed or disarmed mode by key

Specifications Device lengths 2' 2' (610 mm) Door size - shipped less UL label

3' 2'4" to 3' (660mm to 914 mm) door size 4' 2'8" to 4' (813 mm to 1219 mm) door size

Device centerline from finished floor

39 13/16" (1006mm)

Center case dimensions

8 13/16" x 2 13/32" x 1 9/16" (208mm x 62mm x 40mm)

Mechanism case dimensions

2 1/4" x 2 1/4" (57mm x 57mm)

Projection Pushbar neutral – 3 13/16" (97 mm) Pushbar depressed – 3 1/16" (78 mm)

Latch bolt Deadlocking anti-friction top & bottom bolt 1/2" (13mm) throw Door undercut 3/4" (19mm) Maximum Top & bottom latch 5 13/16" x 1 1/4" x 1 7/16" (147mm x 32mm x 37mm) Vertical cables 7/32" (6mm) Diameter stainless steel cables Fasteners & sex bolts (SNB)

Includes 1 3/4" (44mm) – 2 1/4" (57mm) wood doors #425 SNB furnished standard for end case #325 SNB furnished standard for EO (exit only device)

Electric options ALK Alarm kit CX Chexit delayed exit EL Electric latch retraction HD-EL Electric latch retraction with hex dogging QEL Quiet electric latch retraction RX Request to exit, WP-RX waterproof option *LX Latchbolt monitoring *LX-RX Request to exit / latchbolt monitoring *RX-LC, LX-LC, LX-RX-LC Low current option for RX, LX, LX-RX SS Signal switch CON Allegion Connect

Miscellaneous options

GBK Glass bead kit PL Pullman latch PN Pneumatic INS-2/INS-4 Insulclad Kits 1/2" / 1/4" panels LBL Less bottom latch SG Safety glow SEC Security screws SNB Sex bolts

Dogging feature Hex dogging standard CD Cylinder dogging LD Less dogging

Strikes Top – 249 Bottom – 450

DI

Dogging Indicator

• Monitor dogging status without a control panel

• Red indicator light shows visibility to dogging from over 75 feet

*For 33/3550AWDC devices, LX switch monitors trim input or electric dogging of EL/QEL devices.

LX switch does not monitor latchbolt condition.

CON

Allegion Connectors

• Common connectors to connect various door hardware all the way to the power supply

Top latch

Center slide

Top strike

Top strike retrofit bracket

Bottom strike Bottom latch

Von Duprin 33A/35A Series • 27

A /35

A C o ncealed

evice

Lever key locks and unlocks

Lever blank escutcheon always operable (no cylinder)

Thumbturn key locks and unlocks (behind C/case)

Thumbturn always operable (no cylinder) (behind C/case)

Product description 3350AWDC-L

3550AWDC-L

3350AWDCA-L-BE

3550AWDC-L-BE

3350AWDC-T

3550AWDC-T

3350AWDC-T-BE

3550AWDC-T-BE

Trim description 360L 360L-BE 360T 360T-BE Base size 7 1/2" x 1 11/16" x 7/8"

(190x43x22mm) 7 1/2" x 1 11/16" x 7/8" (190x43x22mm)

7 1/2" x 1 11/16" x 7/8" (190x43x22mm)

7 1/2" x 1 11/16" x 7/8" (190x43x22mm)

Grip size — — — — Projection 3"

(76mm) 3" (76mm)

113/16" (46mm)

113/16" (46mm)

ANSI function 08 or 09 field selectable

11 or 12 field selectable

Cylinder type 1 1/4" Mortise — 1 1/4" Mortise —

Handing Handed/Reversible Handed/Reversible — —

Optional trim

— E360L-BE — E360T-BE

Standard trim

Exit only no outside trim

Dummy trim pull when dogged

Night latch key retracts latchbolt

Night latch key retracts latchbolt optional pull required

Product description 3350AWDC-EO

3550AWDC-EO

33950AWDC-DT

3550AWDC-DT

3350AWDC-NL

3550AWDC-NL

3350AWDC-NL-OP

3550AWDC-NL-OP

Trim description — 386DT 386NL 388 Base size

7 15/32" x 1 5/8" (190x41mm)

7 15/32" x 1 5/8" (190x41mm)

7 15/32" x 1 11/16" (190x43mm)

Grip size

8 1/2" x 4 5/16" (216x110mm)

8 1/2" x 4 5/16" (216x110mm)

Projection — 2 7/16" (62mm) 2 7/16" (62mm) 1" (25mm)

ANSI function 01 02 03 03 Cylinder type — — Rim Rim

Handing — — Handed —

Optional trim x 360L-DT x 550DT x IVES 8190 x 550DT x IVES 8190 10"

EO

L L-BE T T-BE

DT NL NL-OP

Note: Non-standard sizes available with extended lead time. Consult Customer Care for more information 1-877-671-7011.

Door Opening Height is measured from finished floor to frame rabbet on door side.

See table on left for standard offering.

Standard door opening height Feet (Inches) 6'8" - 7' (72" - 84") 7'1" - 8' (85" - 96")

8'1" - 9' (97" - 108")

9'1" - 10' (109" - 120")

30 • Von Duprin 33A/35A Series

A /3 5A

T rim s el ec tio n

33A/35A Optional trim

Lever Pull when dogged

Night latch key retracts latchbolt

Night Latch key retracts latchbolt

Thumbturn key locks & unlocks

Thumbturn key locks & unlocks

Trim description 360L-DT 388 x 550DT 388 x IVES 8190 10" 360T x 550DT 360T x IVES 8190 10"

Base size 7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm)

7 1/2 x 1 11/16" (190x43mm)

7 1/2 x 1 11/16" (190x43mm)

7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm)

7 1/2 x 1 11/16" x 7/8" (190x43mmx22mm)

Grip size — 10" center to center 10" center to center 10" center to center 10" center to center

Projection 3" (76mm) 1" (25mm) 1" (25mm) 1 13/16" (46mm) 1 13/16" (46mm)

ANSI function 02 03 03 11/12 Field selectable 11/12 Field selectable

Cylinder type — Rim Rim 1 1/4" Mortise 1 1/4" Mortise

Handing Handed / Reversible — — — —

4646 • Von Duprin 33A/35A Series

Fi ni sh es

33A/35A Finishes

Finishes*

Color US number

BHMA

number

Chromium, polished

US26 625

Anodized, aluminum

US28 628

Chromium, dull US26D 626

Brass, polished US3 605

Brass, dull US4 606

Special finishes

Color US number

BHMA

number

Satin chrome, Antimicrobial

US26D-

AM

626-AM

Aged bronze 643e

Color US number

BHMA

number

Bronze, dull US10 612

Satin nickel

Available for

35A ONLY

US15 619

Duranodic dark bronze

313 710

Black 315 711

Pushpad Options — Knurled Embossed “Push” Braille (Caution-Stairwell), satin stainless steel only RSS – (Emergency Exit – Push to open and sound alarm) – Red Silkscreen lettering on US32D

* NOTE: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY.

Ives Architectural hardware products B14

Protection Plates

B

Pu lls

P la te s A

H in ge s

P iv ot s C

Fl us h Bo lt s &

C oo rd in at or s D

La tc he s, C at ch es

B ol ts

E St op s F

Ex te rio r H ar dw ar e

G M is ce lla ne ou s H ar dw ar e

8400 Series Protection Plates

• Door protection plates are available in .050” thick brass, stainless steel or aluminum; and 1/8” thick high impact polyethylene in clear or black .

Optional screw packs are available for TEK or TORK screw heads .

Refer to the following chart for ordering .

Kickplate Gasket Tape Tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation . One tape pack will cover an the perimeters of a 8” x 34” kickplate . Order 8401 Gasket Tape .

8400 Protection Plate 8402 (UL)* Protection Plate *UL mark appears in upper right corner. Factory supplied screws must be used.

Number of screw packs required by plate size (specify TEK Screws or TORK screws) .

22”-25” 26”-33” 34”-41” 42”-48” 4”-8” 1 1 1 1 9”-16” 1 1 1 1 17”-24” 1 1 1 2 25”-32” 1 1 2 2 33”-40” 1 2 2 2 41”-48” 2 2 2 2

Finishes brass 24” x 48” max. size US Number US3 US4 US10 US10B US15 US26 US26D

BHMA 605 606 612 613 619 625 626

Finishes stainless steel US Number US32 US32D

BHMA 629 630

Finishes aluminum US Number US28

BHMA 628

Finishes plastic Clear and Black

Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619, PA716, B3, B505, B619, B716

Ives Architectural hardware products B18

Protection Plates

B

Pu lls

P la te s A

H in ge s

P iv ot s C

Fl us h Bo lt s &

C oo rd in at or s D

La tc he s, C at ch es

B ol ts

E St op s F

Ex te rio r H ar dw ar e

G M is ce lla ne ou s H ar dw ar e

Mop Plates

• Protect the bottom of the pull side of door subject to cleaning and mopping procedures .

• Size Ranges:4” to 6” high, 22” to 48” wide

Kick Plates

• Protect the bottom of the push side of doors subject to scuffing from foot traffic .

• Recommended for all doors subject to normal use

(especially doors using a closer) .

• Size Ranges: 8” to 24” high, 22” to 48” wide

Stretcher Plates

• Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment .

Armor Plates

• Protect lower half of doors from abuse by hard carts, trucks and rough usage .

• Usually applied to push side of single doors and both sides of double acting doors .

• Size Ranges: 26” to 48” high, 22” to 48” wide

110 111

PHONE 877-671-7011

FAX 800-248-1460

www.allegion.com/us 2/14

STA

NDARD ANODIZED

FINISHHANDING

HANDED

NON-H

ANDED

COVER

META

L

ARM FUNCTION

STA

NDARD (S

IN

GLE

LE

VER)

REGULA

R (D

OUBLE

LE

VER)

OFF

SET PIVOT BUTT HIN

GE ARM

CENTER PIVOT ARM

DOUBLE

EGRESS (P

USH/PULL

MOUNTING

SURFA

CE M

OUNT SIN

GLE

DOOR

SURFA

CE M

OUNT SIM

ULTA

NEOUS PAIR

SURFA

CE M

OUNT IN

DEPENDENT PAIR

CONCEALE

D SIN

GLE

DOOR

CONCEALE

D IN

DEPENDENT PAIR

CONCEALE

D SIM

ULTA

NEOUS PAIR

The 9550 SENIOR SWING by LCN is an

ADA door operator that is a two-in-one swing door operator. SENIOR SWING operators when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.

n Push ‘N Go permits non-switch activation.

n Power Boost provides additional latching force.

n Electromechanical unit with microprocessor control.

requirements and ANSI A156.19.

n UL approved for fire doors.

9550 Series is fully compliant with

UL 325 & UL 1998 and meets the provisions of ANSI A156.19. The 9550

Series is UL listed for fire-rated applications. The 9550 Series also meets the provisions of the Americans with Disabilities Act.

n 9550 Series operator is shipped with motor gearboxes, control box, arms, header, and mounting hardware. Actuators available separately, see pages 122-137.

n Simultaneous pair, surface mounted.

n Meets ADA requirements (power mode only).

n Handed product.

n Pull, Push or Double Egress applications available.

n 72˝ header length is standard. Specify other length 52˝ to 98˝. Consult factory regarding this option.

n Adjustable hold open period of 2 to 32 seconds in automatic or manual mode.

OPERATOR MOUNTS

SIMULTANEOUS PAIR, SURFACE MOUNT

*PULL SIDE

PUSH SIDE

DOUBLE EGRESS

*PULL SIDE mount shown

9550 SERIES

FE

AT

UR

ES

AVAILABLE

NOT AVAILABLE

FAX 800-248-1460

www.allegion.com/us 2/14112 n Butt Hinges should not exceed 5˝ (127 mm) in width.

n Reveal for push installations should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM.

n Reveal for pull installations should not exceed 4˝ (102 mm).

n Reveal for double egress installations should not exceed 4˝ (102 mm).

n Head Frame minimum 1-3/4˝ (44 mm). Face frame 6-3/4˝ (171 mm) total operator clearance.

n Top Rail minimum 2-3/4˝ (70 mm).

n Opening & Closing Time are variable by adjustments to the electronic control box. Maximum hold open time adjustable up to approximately 32 seconds.

n System Diagram see “AUTOMATIC OPERATORS” section pages 53 for typical system wiring and page 56 for electrical data.

TOP JAMB SIMULTANEOUS

PAIR (OFFSET PIVOT/BUTT

HINGE, CENTER PIVOT, PUSH)

MOUNTING

Consult factory for all balanced door installations.

TOP JAMB SIMULTANEOUS

PAIR (OFFSET PIVOT/

BUTT HINGE, CENTER PIVOT,

PULL) MOUNTING

NOTE: Cannot be used with swing clear hinges, pocket pivots or balanced doors.

MAXIMUM OPENING

Template allows 90 degree power opening and 90 degree manual opening.

OUTGOING

PUSH ARM

ASS'Y

17" From edge of door

OFFSET

PIVOT

or

BUTT

HINGES

3/4

70 MM

SWING

OPERATOR

8'-0" DOOR OPENING (MAX.)

R E

V E

A L

OUTGOING

1/2

114 MM

171 MM

146 MM

25 MM

DOOR

DIRECTION

FRAME

EXTERIOR

7/16

" From top of door

SECONDARY LINK

PULL ARM

OFFSET

PIVOT

or

8'-0" DOOR OPENING (MAX.)

INCOMING

INCOMING

PULL CHANNEL

INTERIOR

3/8

441 MM

44 MM

291 MM

PULL

CHANNEL

5/16

49 MM

LCN 9550 SERIES

OU

NT

IN

G

DE

TA

IL

S

Contact LCN Product Support for installation assistance.

112 113

FAX 800-248-1460

www.allegion.com/us 2/14 n Butt Hinges should not exceed 5˝ (127 mm) in width.

n Reveal for push installations should not exceed 10˝ (254 mm) for REGULAR ARM and 20˝ (508 mm) for LONG ARM.

n Reveal for pull installations should not exceed 4˝ (102 mm).

n Reveal for double egress installations should not exceed 4˝ (102 mm).

n Head Frame minimum 1-3/4˝ (44 mm). Face frame 6-3/4˝ (171 mm) total operator clearance.

n Top Rail minimum 2-3/4˝ (70 mm).

n Opening & Closing Time are variable by adjustments to the electronic control box. Maximum hold open time adjustable up to approximately 32 seconds.

n System Diagram see “AUTOMATIC OPERATORS” section pages 53 for typical system wiring and page 56 for electrical data.

TOP JAMB SIMULTANEOUS

PAIR (RH DOUBLE

EGRESS) MOUNTING

Double egress applications with safety sensors require LCN 9560 series.

NOTE: Cannot be used with swing clear hinges, pocket pivots or balanced door.

HOLLOW METAL FRAME

Suggested Installation.

MAXIMUM OPENING

Template allows 90 degree power opening and 90 degree manual opening.

48" DOOR OPENING (MAX.)

2 3/4

48" DOOR OPENING (MAX.)

44 MM

17" From edge of door

292 MM

3/8

PULL CHANNEL

3/

SECONDARY LINK

3/

F R

O M

B O

T

TO

O F

D O

O R

S

P

/1 6"

F R

P O

F D

O

R

PULL

CHANNEL

9550 SERIES

OU

NT

IN

G

DE

TA

IL

Contact LCN Product Support for installation assistance.

www.allegion.com/us 2/14114

MOTOR GEARBOX

MOTOR GEARBOX – SENIOR SWING, 9550-3454

Driving mechanism for operator. Provides 15 lbs opening force. Handed.

MOUNTING BRACKETS

MOUNTING BRACKET – 2-3/4˝, 9550-275

Motor gearbox mounting bracket for 2-3/4˝ offset pivot or butt hinge installations. Front bracket.

REAR MOUNT BRACKET, 9550-3018

Motor gearbox mounting bracket. Rear bracket.

ANGLED BRACKET, 9550-334-1

Mounting bracket for surface applications. (Includes 2 mounting brackets).

CONTROL BOXES

CONTROL BOX – SENIOR SWING, 9550-3462

Electronic controlling device for Senior Swing.

COMPANION CABLE, 9550-982

Cable that allows one control box to run two motor gear boxes.

Companion cable. For use with Senior Swing.

HEADERS

HEADER, 9550-3572HL

Standard, mounting header. Pair door, two operators.

Specify length 52˝ to 98˝ maximum.

END CAPS

HEADER ENDCAPS, 9550-334

End cap with openings for wiring.

END DRESS PLATE, 9550-334-2

Metal finish end cap.

275 3018 334-1 (2)

3572HL

334 334-2

9550 SERIES

AC

CE

SS

OR

IE

114 115

FAX 800-248-1460

www.allegion.com/us 2/14

ARMS

STANDARD ARM ASSEMBLY, 9550-3077PLCM

Handed arm. (Includes 3077 regular arm assembly, 3038 track, and 3034 track roller).

REGULAR ARM ASSEMBLY, 9550-3077

Handed arm. (Includes 77 main arm assembly and 79 linkage assembly).

REGULAR LONG ARM ASSEMBLY, 9550-3077L

Handed arm. (Includes 77 main arm assembly and 79LR linkage assembly).

STANDARD ARM, 9550-3077T

Handed arm. Track roller not included.

MAIN ARM, 9550-77

Handed arm attaches to motor gearbox.

LINKAGE ASSEMBLY – 15˝, 9550-79

Threaded rod attaches to door. Extends from main arm.

LINKAGE ASSEMBLY – 32˝, 9550-79LR

Threaded long rod attaches to door. Extends from main arm.

Used for reveal 10˝ to 20˝.

TRACKS

TRACK 9550-3038

Standard non-handed track.

TRACK END CAP 9550-73

Black plastic end caps.

ROLLER, 9550-3034

Quiet low friction roller assembly.

INSTALLATION ACCESSORIES

SPINDLE PLATE – 2-3/4˝, 9550-11A

Hides bottom of motor gearbox. Completes header box. Cutout allows for motor gearbox shaft. For 2-3/4˝ offset pivot or butt hinge installations.

FILLER PLATE BLANK, 9550-12

Completes length of header box. (Specify length).

MOUNTING PLATE, 9550-18

Optional mounting plate for standard hollow metal door frames. Specify length 55-1/2˝ to 101-1/2˝ maximum when using angle brackets. Specify length 52˝ to 98˝ maximum when using dress plates.

NOTE: The length of a universal 18 plate will need to be ordered 3-1/2˝ longer than the supplied header when using angle brackets.

3077PLCM

3077L

79/

79LR

3077T 77

79LR

11A 12

9550 SERIES

AC

CE

SS

OR

IE

www.allegion.com/us 2/14116

Minimum Combined

Door Width

HOW-TO-ORDER

9550 SERIES OPERATORS

1. SPECIFY HAND

RH

LH

2. SPECIFY HEADER / LENGTH

HL__ (Specify length 52˝ to 98˝) regular or long arm HL__ (Specify length 60˝ to 98˝) for standard or DE arm

3. SPECIFY FINISH

Standard Anodized Finish ______________

Aluminum or Dark Bronze.

OPERATOR OPTIONS

MOUNTING PLATE

Plate, ____ (Specify Length 52˝ to 101-1/2˝)

ARM

Standard Arm (2 ea) w/Standard Track (2 ea) Double Egress

Includes Standard Arm w/Track (1 ea) & Regular Arm (1 ea)

Long Arm (3077L)

Operator will be shipped with:

- STANDARD MOTOR GEARBOX (SF) (2 ea),

- STANDARD CONTROL BOX (SC),

- METAL COVER (at specified length 72˝ standard),

- REGULAR ARM (2 ea),

- 2-3/4˝ PIVOT POINT,

- MACHINE SCREW PACK

9550 SERIES

OR

DE

RI

NG

IN

FO

RM

AT

IO

N

COMBINED DOOR WIDTH

52" 1321mm

96" 2438mm

Indicates recommended range of door width for operator.

NOTE: For all Senior Swing Series.

Simultaneous Pair – Width per leaf 30˝ minimum to 48˝ maximum.

TABLE OF SIZES

FAX 800-248-1460

www.allegion.com/us 2/14

ELECTROMECHANICAL POWERED SYSTEMS

ELECTROMECHANICAL AUTOMATIC OPERATORS

LCN’s electromechanical products are designed primarily for automatic opening applications that occasionally require manual opening. A control box provides all electrical functions. These self-contained units are suitable for use on single leaf doors or pair of doors. These products combine all the control and power elements into a single operator package, only some actuators are required to complete the system.

n Surface mounted and overhead concealed mountings available.

n Available in two standard anodized finishes – Aluminum and Dark Bronze.

LOW ENERGY ELECTROMECHANICAL

POWER OPERATORS

3 seconds.

n Less than 15 lbs of force to open door manually.

STANDARDS, LISTINGS & APPROVALS

Separation of high and low voltage.

n Consult the factory for other listings.

WARRANTY

n 2 year limited warranty. See General Information Section for complete details.

MAINTENANCE

Low Energy Electromechanical Power Operators n Operators mounted according to the LCN Installation instructions require no periodic maintenance or adjustments.

www.allegion.com/us 2/1454

ELECTROMECHANICAL POWERED SYSTEMS

SINGLE DOOR SYSTEM (WIRELESS)

How It Works Wireless actuators with receiver, powered by the transformer allows for easy installation. For automatic door operation, touching either actuator signals the receiver and power operator to open the door to 90 degrees. The door is held there until the system times out. Door closes via spring return.

Door opening speed, closing speed and hold open time is adjustable on the control box. If not actuated, the power operator functions as a manual door.

120V Input

Low Voltage Wiring

RF Receiver

RF Actuator

RF Actuator

Automatic Operator

SINGLE DOOR SYSTEMS

VESTIBULE ENTRY SYSTEM (WIRED)

How It Works This installation provides both accessibility and security for building occupants. It allows for the integration of multiple automatic operators, a card reader and electric strike. A sequencer allows sequential operation of the two automatic operators. Vestibule actuators allow single door ingress/ egress from the vestibule as needed. If not actuated the power operator functions as a manual door.

Wiring

Wall Plate Actuator

Automatic Operator

Automatic Operator

Card Reader w/keypad as Exterior Actuator

Sequencer

Electric Strike

Note: 120V AC Input required to both operators

120V Input

120V Input

VESTIBULE ENTRY OPERATION

BILL OF MATERIALS

Qty. Part No. Description 1 9542 Automatic operator (RH) 1 9531 Automatic operator (RH) 3 8310-853 Wall Plate Actuators 1 8310-849 Sequencer Other products from Von Duprin and Schlage Electronics

BILL OF MATERIALS

Qty. Part No. Description 1 9531 Automatic Operator (RH) 2 8310-3853WS Wireless Actuators 1 8310-865 Wireless Receiver

This page illustrates examples of typical Electromechanical LCN systems. Please consult your local SSC representative of LCN for assistance with specific installations and material requirements.

54 55

FAX 800-248-1460

www.allegion.com/us 2/14

ELECTROMECHANICAL POWERED SYSTEMS

CONTROL BOX - 2800, 9500 SERIES

1. Control Box, 115VAC 60Hz, or 240 VAC 50/100 Hz

2. Seven Segment Display

3. Power Indicator

4. Factory Default Push Button

5. Model Identification Label

6. 6-Pin Connector for Master Motor

7. 3-Pin Connector for 3 Position Switch

8. Breakaway Jumper Cable

9. 2-Pin Connector for Breakaway Switch

10. Accessory Direct Connect Diagram

11. 6-Pin Connector for Companion Motor (supply only w/simultaneous pairs)

12. Value Adjustment Push Buttons

13. Setting Adjustment Menu

14. Function Adjustment Push Buttons

15. Closing Speed Adjustment Dial (Master)

16. Closing Speed Adjustment Dial (Companion)

17. 3-Pin Connector for AC power www.allegion.com/us 2/1456

ELECTROMECHANICAL POWERED SYSTEMS

STANDARD CONTROL BOX - 9100 SERIES

! NOTE

3-WAY

COMMON

3-WAY

SAFETY

COMMON

MAIN ACT.

AUX. ACT.

17 VAC

ACC PWR

NO

C

NC

GREEN

BLACK

RED

Transformer or power supply

Electric lock, electric strike, etc.

3-position switch key 84219-900 rocker 84220-900

Cut off 3-position switch connector and strip wire ends before use

Multiple activation devices should be connected in parallel

N.O. or N.C.

depending upon device

Safety device N.O. dry contact

Activation device N.O. dry contact

Control box grounding stud

For clarity, not all components are shown on the control box PC board

J8, 10-position Control Box Power Cable

J1, 6-position Main Power Cable

J5, 2-position Motor Power Cable J3, 4-position Hall Effect Cable

Plug cables into these receptacles

See explanation of “NO,” “NC,” and “AUX.ACT” circuts on page 9.

56 57

FAX 800-248-1460

www.allegion.com/us 2/14

ELECTROMECHANICAL POWERED SYSTEMS

GENERAL ELECTRICAL DATA

1. The 115/240 volt power supply must be a dedicated circuit from the main circuit breaker panel and must not be connected into a building lighting system operating fluorescent lights.

2. Location of conduits determined by mounting. See installation instructions for location.

2800, 9500, SERIES

ELECTRICAL DATA

1. 120 VAC 60Hz input @ 2.5 amps (2800 and 7500 Series).

2. 240 VAC 50/60 Hz @ 2.5 amps (2800, and 9500 Series).

3. 24 V AC output @ 1.5 amps (protected by self-resetting thermal fuse).

4. 24 V DC available with SO kit included.

9100, SERIES

ELECTRICAL DATA

1. 120 VAC input @ 1 amp.

2. 24 VDC output @ 2.5 amps.

128 129

FAX 800-248-1460

www.allegion.com/us 2/14

AC

TU

AT

OR

S & A

CC

ES

SO

RI

ES

AUTOMATIC OPERATOR ACTUATORS & ACCESSORIES

8310 Series 4-3/4” Square Surface and Flush mounts

WALL MOUNTED ACTUATOR, 8310-853

Hardwired low voltage actuator with stainless steel touch plate in 4-3/4˝ (121mm) square. Engraved blue filled handicap symbol conforms to most accessibility codes. Designed to mount in a flush or surface mount box (sold separately) in/on a vertical surface near the controlled door. Optional mounting in single gang electrical box (by others) or double gang box (4˝ x 4˝ by others) or on an 8310-866 bollard post. Heavy industrial grade components provide vandal resistant mounting and weather resistant switch standard.

WALL MOUNTED ACTUATOR, 8310-853T

Same as the 8310-853, with the added engraving of “Push to Open”.

SURFACE MOUNTED ACTUATOR, 8310-853WP

Wireless, low profile, low voltage actuator with round, stainless steel touch plate in 4-3/4˝ (121mm) square. Engraved blue filled handicap symbol conforms to most accessibility codes. Surface mount box includes integral transmitter w/ battery and actuator switch. Heavy industrial grade components provide vandal resistant mounting and weather resistant switch standard. Requires 8310-865 Receiver.

SURFACE MOUNTED ACTUATOR, 8310-853TWP

Same as the 8310-853WP, with the added engraving of “Push to Open”.

FLUSH MOUNT BOX, 8310-867F

Rugged Plastic Box, 4-3/4˝ Square. Optional accessory - Can be used w/ any 4-3/4˝ square actuator.

SURFACE MOUNT BOX, 8310-867S

Rugged Plastic Box, 4-3/4˝ Square. Optional accessory - Can be used w/ any 4-3/4˝ square actuator.

WEATHER/TRIM RING, 8310-801

Plastic Weather Ring, 4-3/4˝ Square. Optional accessory - Can be used w/ any 4-3/4˝ square plastic mounting box.

TRANSMITTER, 8310-844

Transmitter, Wireless, 1 Channel, 9v battery included.

Use to convert standard wall mount actuator to wireless.

Requires 8310-865 Receiver.

RECEIVER, 8310-865

Receiver, Wireless, 1 Channel, w/ Sequencing Feature Used in conjunction w/ Wireless Actuators & Transmitter(s).

TOUCHLESS WALL MOUNTED ACTUATOR, 8310-813

Hardwired low voltage actuator with plastic plate in 4-3/4˝ (121mm) square. Optional mounting in single gang electrical box (by others) or double gang box (4˝ x 4˝ by others).

853T853

853WP 853TWP

867F 867S www.allegion.com/us 2/14132

AC

TU

AT

OR

S & A

CC

ES

SO

RI

ES FULL LENGTH ACTUATOR (FLA), 8310-836T

Hardwired low voltage actuator with stainless steel touch plate with 36˝ x 6˝ ac va on surface. Blue handicap symbol conforms with most accessibility codes. Added "PUSH TO OPEN" lettering for enhanced identification. Designed to meet California building codes and increase accessibility for wheelchair bound entrants.

Can easily be mounted to any flat surface or a bollard post.

FULL LENGTH ACTUATOR (FLA), 8310-836TW

Same as the 8310-836T with a built in wireless transmitter and 3v battery. Use in conjunction with 8310-865 Receiver (not included).

RECEIVER, 8310-865

Receiver, Wireless, 1 Channel, w/Sequencing Feature. Used in conjunction w/ Wireless Actuators & Transmitter(s).

TRANSMITTER,…