Attachment 3_ SP-2 BJM Pump Specification.pdf

3/19/2014 Visit our website: www.bjmpumps.com 0814

Supersedes

REFER TO REVERSE SIDE FOR PUMP PERFORMANCE CURVES

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Seal Minder is a registered trademark of BJM Pumps, LLC. All rights reserved.

TECHNICAL DATA

MODEL JX15SS

BJM SUBMERSIBLE PUMP - 316 SS

GENERAL DATA 208/230/460/575V

MAX. FLOW: GPM (L/min) 158 GPM (598 L/min)

MAX. HEAD: ft (m) 60’ (18 m)

MAX. SUBMERSION DEPTH: ft (m) 65’ (20m) or limited to length of power cord, Consult factory for deeper depths

PUMP TYPE SUMP, SIDE DISCHARGE

MINIMUM SUBMERSION DEPTH: in(mm) 9.5” (241 mm)

SOLID SIZE: in (mm) 3/16” (4.7 mm)

STRAINER OPENING 0.5625”x0.25” (14.3x6.3 mm) slot

IMPELLER DIAMETER: in (mm) 4.68” (119 mm)

DISCHARGE SIZE 3” NPT-MALE

PUMP WEIGHT, without cable: lbs (kg) 65 lbs (29.5 kg)

SHIPPING WEIGHT: lbs (kg) 72 lbs (32.7 kg)

CONSTRUCTION / MATERIAL DATA

MECHANICAL SEAL - UPPER CARBON/CERAMIC

MECHANICAL SEAL - LOWER SILICON CARBIDE/SILICON CARBIDE

MOTOR CASING 316 SS

PUMP VOLUTE 316 SS

IMPELLER- MULTI VANE 316 SS

STRAINER 316 SS

LIPSEAL & O-RINGS VITON

ROTOR SHAFT 316 SS

EXTERNAL HARDWARE 316 SS

QTY. OIL IN SEAL CHAMBER 10.1 U.S. FL. OZ. (300 C.C.)

QTY. OIL IN MOTOR STATOR

No oil in motor stator (After ser# 40843).

13.5 U.S. FL. OZ. (400 C.C.) (Before ser# 40843).

BALL BEARING: PERM. LUBE. UPPER 6203

BALL BEARING: PERM. LUBE. LOWER 6304

ELECTRICAL / MOTOR DATA

MOTOR: TYPE, RATING HP SUBMERSIBLE, 2 (CONTINUOUS DUTY

MOTOR RPM 3450

MOTOR INSULATION CLASS F

MOTOR SERVICE FACTOR 1.1

VOLTAGE

- 3 PH, 60 Hz 208V option 230V 460V 575V option

CURRENT F.L.A. 6.3 6 3 2.3

LOCKED ROTOR CURRENT (LRA) 44.6 44 22 15.5

MOTOR PROTECTION THERMAL & AMP. OVERLOAD

POWER CORD: GAGE; LENGTH A.W.G. 16/4; 33’ (10 m), STOW

MAXIMUM LIQUID TEMPERATURE 104°F (40°C)

SEAL LEAK DETECTOR

(OPTIONAL) Seal Minder®; MOISTURE SENSING PROBE

1- Available in other voltages (and in 50 Hz).

2- Requires a seal fail circuit in control panel for warning signal.

3 - NOTE: STAINLESS STEEL PUMPS MAY NOT BE SUITABLE FOR CONTINUOUS DUTY IN ALL

APPLICATIONS. PLEASE CONSULT WITH BJM PUMPS. MAY BE NECESSARY TO OFFER ‘F’ SERIES

HIGH TEMPERATURE PUMPS WHEN CONSIDERING CONTINUOUS DUTY OPERATION.

©2004 - 2014 BJM Pumps, LLC. All rights reserved.

123 Spencer Plain Road Old Saybrook, CT. 06475, USA

(860)399-5937 - (877) BJM-PUMP - Fax: (860)399-7784