Attachment_3a_-_MRM_Pedestal_-_3568-09R-30-120.pdf

1 (CUT FROM ITEM 1)-NSI-MI3568-09R-30-120 ITEM-33

4 PLATE, STEEL A572 GRADE 50, .38 IN THK-NSI-MI3568-09R-30-120 ITEM-22

1 PLATE, STEEL A572 GRADE 50, 1.0 IN THK-NSI-MI3568-09R-30-120 ITEM-11

PARTS LIST

QTYREF DESGDESCRIPTIONNSI PART NO.MANUFACTURERMANUF. P.N.ITEM

A A

B B

C C

D D

SHEET 1 OF 3

DESIGNER

DRAWN

APPROVED

NSI PART NO.

04-03125

B. MARKS

B. MARKS

2/1/2017

2/1/2017

DWG NO

TITLE

SIZE

D

SCALE

REV

- 3568-09R-30-120.iam

F. MOTAMED

BREAK CORNERS: .01/.02

SURFACE ROUGHNESS:

DO NOT SCALE DRAWING

DECIMALS

.X `0.1

.XX `0.03

.XXX `0.010

`1/4 ±1°

.X±0.1°

.XX±0.01°

ANGLES

TOLERANCES ARE:

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES

FRACTIONS

NSI-MI PROPRIETARY

This document contains proprietary information and except with written permission of NSI-MI TECHNOLOGIES. such information shall not be published or disclosed to others, or to be used for any purpose, and the document shall not be copied in whole or in part.

NSI-MI TECHNOLOGIES

1125 SATELLITE BLVD

SUWANEE, GA 30024 TEL:678-475-8303

L.A. BRANCH TEL: (310) 525-7000

FINISH

EST. WEIGHT

MATERIAL

SEE PARTS LIST

SEE NOTES

3568-09R-30-120

2/3/2017

1 / 6 928 lbmass

WELDMENT, PEDESTAL, MH50 ROBOT,

75.0 INCH HEIGHT

CAGE CODE

7MSX5

2/3/2017

B. TROSTLE

CHECKED

REVISION HISTORY

ECN NUMBER REV DESCRIPTION DWN RVD APPR DATE

INITIAL RELEASE

NOTES UNLESS OTHERWISE SPECIFIED:

1. INTERPRET ALL DIMENSIONS AND TOLERANCES TO ASME Y14.5M-2009.

2 PRE-WELDING DIMENSIONS SHOWN FOR ITEM 2 ARE APPROXIMATE.

PREPARE AS NECESSARY TO ACHIEVE DIMENSIONS SHOWN ON SHEET 2.

3. ALL WELDING SHALL CONFORM TO AWS D1.1, AND ALL WELDERS SHALL

BE QUALIFIED PRIOR TO FABRICATION.

4. FINAL INSPECTIONS OF FORM (FLATNESS, STRAIGHTNESS) AND

ORIENTATION (PARALLEL, AND PERPENDICULARITY) SHALL OCCUR IN A

FREE, FLAT AND UNCONSTRAINED STATE AFTER STRESS RELIEVE. AN

INSPECTION REPORT INDICATING MEASURED VALUES AND CERTIFIED

MEASUREMENT UNCERTAINTIES SHALL BE FURNISHED TO NSI-MI WITH

CERTIFICATE OF COMPLIANCE PRIOR TO SHIPMENT.

5. SAND BLAST (COMMERCIAL BLAST PER SSPC-SP6).

6. DEGREASE PRIOR TO FINISH.

7 MASK THREADS AND INDICATED SURFACES.

8. PHOSPHATE CLEAN ALL PARTS.

9 . REMOVE ALL SAND BLAST MATERIAL PRIOR TO FINISH.

FINISH: PAINT PER MANUFACTURERS INSTRUCTIONS, PRIME WITH

DEVOE BAR RUST 235, PN. 235-H-3501.

PAINT BLACK WITH DEVTHANE 379, P/N 379-H-1000.

10 PERMANENT INK STAMP PART NO, REV & WEIGHT IN 1" LETTERING, AS

FOLLOWS:

3568-09R-30-120, REV -

930 LB / 422 kg

LOCATE APPROXIMATELY AS SHOWN.

SECTION A-A

SCALE 1 / 2

A

A

A A

B B

C C

D D

SHEET 2 OF 3

DWG NO

TITLE

SIZE

D

SCALE

REV

NSI-MI TECHNOLOGIES

1125 SATELLITE BLVD

SUWANEE, GA 30024 TEL:678-475-8303

L.A. BRANCH TEL: (310) 525-7000

3568-09R-30-120 1 / 6

WELDMENT, PEDESTAL, MH50 ROBOT,

75.0 INCH HEIGHT

CAGE CODE

7MSX5

(.38)

(.38)

.38 2-4

4 PL

4X M8x1.25 - 6H

THRU NEAR WALL (DRILL

PERPENDICULAR TO WALL)

7.579

15.157

7.874

15.748

6.299

12.598

4.528

9.055

3.50 o

6.0

26.2

11.74X

.38

.38

75.00 c 0.010 A c 0.010 f 0.040 A

2.94X

3/4-10 UNC - 2B

THRU TOP PLATE

8X M20x2.5 - 6H

THRU TOP PLATE

7 (MASK ENTIRE TOP SURFACE)

n2.2516X (MASK AROUND HOLES, AREA TO BE FREE OF WELD)

7.250 2X

7.250 2X

14.500 14.500

7.2502X

7.2502X

14.500

14.500

16X n.709 THRU

7 (MASK ENTIRE BOTTOM SURFACE)

q

7 7

ITEM 1

SCALE 1 / 4

ITEM 2

SCALE 1 / 5

ITEM 3

SCALE 1 / 4

A A

B B

C C

D D

SHEET 3 OF 3

DWG NO

TITLE

SIZE

D

SCALE

REV

NSI-MI TECHNOLOGIES

1125 SATELLITE BLVD

SUWANEE, GA 30024 TEL:678-475-8303

L.A. BRANCH TEL: (310) 525-7000

3568-09R-30-120 1 / 6

WELDMENT, PEDESTAL, MH50 ROBOT,

75.0 INCH HEIGHT

CAGE CODE

7MSX5

31.5

31.5

(1.00)

(1.00) 22.0

22.0

4X 3.0 x 45° CHAMFER

4X .8 x 45° CHAMFER (DIMENSIONS AS NEEDED TO CUT OUT ITEM 3)

25.0

73.0

17.8

(.38)

2q