N00253-14-R-0010-0002.pdf

PDF 98 KB Posted

Attached to
Manufactured Machined Parts
Solicitation number
N0025314R0010
Issued by

About this file

N00253-14-R-0010 Amendment 0002 to provide answers to vendor questions and incorporate Attachment 4 - 3D Model Hull Cold Gas .

View the file

Other files

File Type Posted
N00253-14-R-0010-0004.pdf PDF
N00253-14-R-0010-0003.doc DOC document
N0025314R0010_0001_10June14.doc DOC document
ATT_3_Past_Performance.docx DOCX document
14R0010_Final.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to provide answ ers to vendor questions and incorpoate Attachment 4 - 3D Model Hull, Cold Gas. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 3

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Jun-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00253-14-R-0010

X 9B. DATED (SEE ITEM 11)

27-May-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Jun-2014

CODE

NAVAL UNDERSEA WARFARE CENTER

ATTN: DAWYN MARTINEZ

DAWYN.MARTINEZ@NAVY.MIL

610 DOWELL ST BLDG 206

KEYPORT WA 98345-7610

N00253 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00253-14-R-0010

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMENDMENT 0002

Questions and Answers

NOTE: Questions and Answers 1 through 11 were provided under Amendment 0001.

Question 12: If we were to finish the 1st part and send it to you earlier than 90 days could we be afforded more time to complete the other 91 parts and all the other line items. For instance if we had the 1st one to you for testing in 30 days could we then have 150 days to complete the order? The quantity needed has gone up but the delivery time has remained the same. Is there any wiggle in the delivery time or is it set in stone?

Answer 12: Refer to Section F, clause 52.211-8 Time of Delivery, which addresses proposing a revised schedule.

The quantity and the number of items required has decreased from the issuance of the original synopsis.

Question 13: Could we get the electronic model for the Cold Gas Hull, drawing 8290001?

Answer 13: A 3D model for the Cold Gas Hull is provided as Attachment 4 to the soliciation N00253-14-R-0010 under Amendment 0002.

Question 14: Part number 8290014 calls for high strength, low alloy steel per ASTM A945 Grade 65. Would it be possible to substitute ASTM A572 Grade 65? Or is there an alternate material that would be acceptable to the

Navy?

Answer 14: ASTM A572 Grade 65 can be substituted for ASTM A945 Grade 65 for the Range Gear & Battery

Bracket (8290014).

Question 15: The raw material for item 8290014, RANGE GEAR & BATTERY BRACKET requires a special mill run. Depending on who we talked to, they want to run 15,000 to 20,000 lbs. Is there an approved alternate material for this item?

Answer 15: Yes, an alternate is ASTM A572 Grade 65.

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

The following have been modified:

HQ J-2-0002 CONTRACT LANGUAGE FOR SECTION J

The following document(s), exhibit(s), and other attachment(s) form a part of this contract:

N00253-14-R-0010

ATTACHMENT 1 – Drawings – Updated 10 June 2014

DRAWING Nomenclature REV

8290001 Hull, Cold Gas No Rev

8290007 Manifold, Bottle No Rev

8290024 Handhold Manifold, Fill No Rev

8290008 Bracket, Valve No Rev

8290022 Bag Strap Mount No Rev

8290014 Range Gear and Battery Bracket No Rev

8290015 Battery Bracket No Rev

8290017 Foam, Bottle Mount No Rev

8290527 Depth Manifold Assembly Cold Gas No Rev

8290694 Druck Sleeve Cold Gas No Rev

8290039 Bottle and Electronics Mount Assy No Rev

8290719 Weight Block 001 No Rev

8290720 Weight Block 002 No Rev

8290721 Weight Block 003 No Rev

5816977 Pin, Alignment Shell Rev C

8290016 Bottle & Electronics Mounting Plate No Rev

8290025 Manifold, Depth Switch No Rev

ATTACHMENT 2: NAVSEA NUWC Division Keyport, OPSEC Guide For Defense Contractors, Rev Oct 2013

(Incorporated by reference. Document can be downloaded from http://www.navsea.navy.mil/nuwc/keyport/default.aspx; click on OPSEC Guide For Defense Contractors on the left-hand side.)

ATTACHMENT 3: Past Performance Worksheet (will not become part of the award document)

ATTACHMENT 4: 3D Model Hull, Cold Gas (will not become part of the award document)

(End of Text)

(End of Summary of Changes)

File details come from the government source that posted it. Updated .