N0010413RDD41_AMEND_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

11.

Contract ID Code I Pag: 1 of Pages

I a

2. Amendment/Modification No. I 3.Effective Date 4. Requisition/Purchase Req. No.

I 5.Project No.

0001 10 DEC 2013 SEE SCHEDULE

6. Issued By CODE I N00104 7. Administered By (If other than Item 6) CODE I Naval Weapons Systems Support-Mechanicsburg 5450 Carlisle Pike P 0 Box 2020 Mechanicsburg PA 17055-0788

Attn: 0212.7 Ext: 1649 E-Mail Address: LESLEY.HUBER®NAVY,MIL

8. Name and Address of Contractor (No., Street, County, State and Zip) 9A.Amendment of Solicitation No.

N0010413RDD41

9B.Dated (See Item 11)

X' 15 NOV 2013

lOA.Modification of Contract/Order No.

lOB. Dated (See Item 13) Code I Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

~ The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers [] is extended, ~ is not extended. Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods: (a) By completing items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGEMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF your offer. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each tele.gram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATION SOF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify Authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. ITEM lOA.

B. THE ABOVE NUMBERED CONTRACT /ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b)

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT OF AUTHORITY OF:

D. ·oTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor [] is not, X is required to sign this document and return 1 cop1es to the 1ssu1ng office.

Attn: Code 0212.7

14. DESCRITION OF AMENDMENT/MODIFICATION' (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

The attached, amended Purchase Description (PD), Amendment SCAT 4380 dated 03 Dec 2013 is hereby inco.rporated and replaces the previous version dated 20 August 2013 in its entirety.

The closing date is hereby extended to December 23, 2013.

All other terms and conditions remain unchanged.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or lOA, as heretofore changed, remains unchanged and in full force and effect 15A. NAME AND TITLE OF SIGNER (Type of print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

LESLEY A. HUBER, Contracting Officer 15B. CONTRACTOR/OFFEROR 15C.DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

10 DEC 2013

(Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7450-01-152-8070

Previous edition unusable

STANDARD FOR 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

03DEC2013

NAVSEA TMDE Program

NAVSEA PERFORMANCE DESCRIPTION

SYNTHESIZED SWEEP GENERATOR 10 MHz TO 40 GHz

Amendment

SCAT 4380

Solicitation No: N001 04-13-R-DD41

1.0 GENERAL This procurement,.,reglfire,s;~;£iY,rttl\lt~~~~J11icrowave sweeper/signal generator capable of generating,~:lgnal~+~ mti;J:e·fre€!uency,tr,~i~0f10 MHz to 40 GHz with analog sweep capabilities a$'~ inteJ.!tc~l, I modfflati.!i)n .Bities.

2.0

CLASSIFICA:irfO shipl:>~~ert>eJicat

. /a. difhe war, . ti •· b,·''~:f'ligb outpyt opti e'nSJSldtri One, h .

s described in section 3.2

3.0 ' ' ·.,·· ~- '. ~:/t£~;~:~,<: _>'-::. ,· ' .. ;:- <·' :::_~;: . . ., " OP.E~ATION~LREQUIREMENl'S The eCjuipme,Jtshall be ca ·

~:within ffi~ pf:l.ra~eters and accuracies specified'herein,

3.1 3.1.1 3.1':2

3.1.6.2

3.1.6.3

3.1.7 3.1.7.1 3.1.7.1.1 3.1.7.2 3.1.7.3 3.1.7.4 3.1.7.5 3.1.7.6

It±>< < 'f)~& N

.r:re uen· ,g;·gang~: . .. ast 10 MHz to 40 GHz '' Dis~lp~fResolution: At least 1 Hz {F s 20 GHz}

., /.;:';.'f' . At least 2Hz {F > 20 GH~} . ~'cy: t:<19?1.tq~ccuracy of ret!ilrenc~ stlt~d)Fdi•(CW'!J't.

·qualc:td''Gr'f)etter than';i\iritijs:sj:?ecified below).· ·· aFLess thatl tpp 109/hr aY2511C ±soc aftecone-lilo

· ·· • 1,0 MHz ifil:ptjt;· Bity equal to. external star\~a ..

ure: Less'tiita .. ·. parts in 106 change over o:,tq ·

.. ··· .,. es1 ..... adulation (C . fnode in 50 Hz to 15 kHz det :

:· FM; .• 4ess than 500 Hz rrns .. ~.~··.:· . ·

·. ,AM:~L~s::than 1.0% pk' , ,:;::·.•;;;7 ;;\~p<;ictr~l PO:fity {F = carrier ffeqoency} · f;;jarmonic/Slib7)1armonic ··

Non~harmonicl~~~~~(6~~t(l£;;to,:~~i ffom carri~r):

. , .,;, s;;.:~;f":'' ·. 4> ?"'··. ·t;'t\S<:;.c£~~::;

. . . .. 4···~,! ... !~{{~ Phase Noi;'~: ;:~~~:1001d8o/1;1z at4~ . .. . C9(.~j,

· .,.".<·':liQ:,.,g,I3~LHz at 1 0 kHz offset fiCl.IJl' carrier •· ''''''·'?~:t,,~:,v}d~; ···,""'"<~~~<::";;~c.,~~y;~Jjj.:~:, , '~·>' . ~4J#it.(:J;,•' ·.~

Analog Sweep (~F = peak sweep offsetab9!1ltil~F'}•~··'·" Sweep Width: 1 MHz to full band Resolution: < 0.1% (< .2% F > 20 GHz) of sweep width Functions: Start/Stop, CW, CF-~F. Marker Trigger: Internal (automatic), External, Single, and Manual Frequency Markers: At least 5; both amplitude and frequency Sweep Time: Adjustable from at least 30 msec to 99 sec Sweep Output: Sawtooth output proportional to sweep width

3.2 3.2.1

Output Characteristics RF Output: Leveled output shall be available at:

03DEC2013

NAVSEA TMDE Program

0.01 GHz to 18 GHz:

>18GHz:

s -105 dBm to~+ 10 dBm s -105 dBm to~ +3 dBm

3.2.2

3.2.3 3.2.4 3.2.5 3.2.5.1 3.2.5.2

Accuracy: ±M dB for output levels from ~ +1 0 dBm to -90 dBm; additional 0.2dB/1 0 dB step for levels below -90 dBm where M = 1.5 {F s 20 GHz}; M = 2 {F > 20 GHz} Display/Resolution: Digitgl f!Ll?l*lay tminimutW"ra(llutior:Lof 0.1 dB

3.2.6 3.2.6.1 3.2.6.2 3.2.6.3 3.2.6.4

3.2.7 3.2.7.1 3.2t7.~ 3.2:7.6

3,i3

Flatness: ± 1.5 dB · "(J at art''outpl!iT'Ie\'l'e'I,·'Of·+ ···· lmpedance/Co,nn · VSWR· < 2·;1at" · ··· Adapt~r~ R~g·gg~f rvi'inib!Jlum · .

Sw~t~·time:

,:/V:~' c,A ,. ~ ~~~~ •'' li:Xternal L~veHng Ext~rnalc,;~stal detector mode.

· Exter.riaJ;:pqwer meter mode "''ExJ~.cnalleveling input signal range: at least 200 microv0lts !P';~Mt;

<· u\:,.: < ' .~·'"~}:~ .,~,< ····:·

3.3.1. Pulse,·Modulati6n,)i;.;;·, 3.3.\~1 ~:t~;·trni~i~l~!:: , , · , , 3 .. 3.1.1.1 •,' Ra,J!il:feRF): AUeast tG.,Hz~o.;t MHz 3.~;1',1.2);,;~tCitl:t(i'l{M): 500nseq}~>1 · ec [FS4GHz],, ..

:.' , h· • +' ··. 25 nsec to 1 [F > 4 GHz 3.:3:'1 .. l:r ,s: less than. , , se'cond,S. ,,,, 3.3.1.1.-~ , , ~ ,: Greater than ., B f~0fL,

3.3.1.1.5 Del~¥; At leas~~i>O nanoseconps t(i) 1 ',

3.3.1.1.5.1 , y: 10 "" .9r 10% ofSetting ,',, · ,

3.3.1.1.5.2 S,y ;,u , · , hT·TL compatible; rise time less ihar.f , fi 3.3.1.1.s:~.YI~¢o . . . .,utput· i''tl;l;.s;gmp~tii:l\e;,:~ig(t'i corresporfa~)o,P'V\11~

3. 3.1.1.6 l;:xternaf Tri~i9e~;;l·oput: TTI.:''i;:ompatible~ '•at least .Hz to/j,, mostulation ,,, s:;,;,:~ c> j;,i.") .·~ .. ;,>,· "'';~:Ui¥1

3.3.1.1.7 Disi'fa(lR~l)olufr~q~;P:!@l~~~~~~pf~y~Pz:~· Pf1.

, ,< Z.. ~:.:S:..¥A{Zf~ " c; };;~ _, •. fft/·'Y'

External"<<···· ·w· ·~ · ,.

Rate (PRF): At::l~~t':1'9<·t;/~ to'1 M

.IA?Jlf syn~;{rate for pulse

3.3.1.2 3.3.1.2.1 3.3.1.2.2 3.3.1.2.3 3.3.1.2.4 3.3.1.3 3.3.1.4

Width (PW): Great'9'ntharf~;0~.znse,~ , ', ,, , . ·da;;l:7"~ ., .. · Video Output: TTL compstill>le put§:e;·i~sme' PW an'd' PRJ:: ... as external input pulse Pulse Input: TTL compatible ···~•;;;;~:;::.: J?i~·" ··

3.3.2 3.3.2.1 3.3.2.1.1

Triggering: Rising or falling edge Sync Output: Modulation waveform, TTL compatible

Amplitude Modulation (AM) [RF Level s 0 dBm] Internal AM Rate: At least 1 0 Hz to 50 kHz (AM rate, a precise integer, must be synthesized from the reference with the same stability and accuracy)

3.3.2.1.2 Depth: 0 to 90% minimum

3.3.2.1.2.1 Accuracy: ±5% [50% depth @ 1 kHz]

3.3.2.1.3 3.3.2.1.4 3.3.2.2 3.3.2.2.1 3.3.2.2.2 3.3.2.2.3 3.3.2.2.4

Distortion: s 5% [50% depth @ 1 kHz] Display/Resolution: digital display AM Depth and Rate External AM Rates: At least 10Hz to 100kHz (3 dB bandwidth) Depth: 0 to 90% minimum Distortion: s 5% [50% depth @ 1 kHz]

3.3.3 3.3.3.1 3.3.3.1.1

3.3.3.1.2

Sensitivity: 1 Vpk for at least 9,0% d~pttl~.

'Z2L>,·,, Frequency Mod Internal FM ~·· Rate: At le~:~·§t"' same stability

FM

1 kHt ii\oci,IJo .. fil:r •• l

78.1 kHz 10 kHz to l5o:·3;·kHz peak for RF ~!~·•kHz to 31~~~1~Hz peak for RF 1 Cfk11~ to' §25 kHz peak for RF . ;

kHz~p';{O Ml-!z peak for RF ·· •. ,. 2.0 MHz peak for RF ..

·to at least 4 MHz peak for RF ktJz to at least 5 MHz peak for RF

3.3.l~1. M ... acy:;t.1Q~ .

3.3.th. Incidental AM: ~4@('$%. Hz J".~.5 kH ) , .

1\L···•;;;;.,,., frorl1!1 .~pe reference with the c ',,,)}•

3.3.~.1.4. •. M (FM·nit;~ )~000 Hz rms (0.05- 15kHz BW) 3:3.3~·1. esolution: Dig :display FM Deviation and Rate:~.;3 digit min i !,~ ~ ~ ~~~ J M:z '~.i.r .•. f.·.~.i.l{(~1~G~Hltz~FF s<.

3.3~3.2J .2 o~)t6~}t1~~~ . '·. · · ; . . •· 3.3.3.2i4. ~~ty!~Dev~~~n:. · . '! ·· .· '••t ''kt'<:

•;:, S.~5\~;:··:::11i.ll~H2~la 39.1 kHz peak for RF .. :;.;;;• 10 kHz f 1 kHz peak>for RF ', .. ;

· ;1 ~l~. kHz pe~~:,fdr ~E;

.. i rb.. ~wz. peal<1ffor;Rf.

:10 ~l*!z";tb 625.kH£p'e~ktor RP·.: ·· 10 kHzt .. · · · ··

·10 kHz to·2r, 1 d k~t%t~ at least: ~ . pea ., RF 1 o kHitq~· a M~~R'f3ak for Rf.

3.3.3.2.3 FM Accuracy: ±1

3.3.3.2.4 Distortion: s 5%

.3.3.3.2.5 Sensitivity: At least 1 MHz/volt

[L'lF ~50 kHz] [300 kHz deviation at 50 kHz]

3.3.4 3.3.4.1 3.3.4.1.1

Phase Modulation (0M) {F =carrier freq./L'l0 = peak phase deviation in radians} lnternai0M

3.3.4.1.2

Rate: at least 1 00 Hz to 1 00 kHz (FM rate synthesized from the reference with the same stability and accuracy) 0M Deviation:

1 mrad to 0.39 rad peak for RF [1 0 MHz- 15.99 MHz]

1 mrad to 0.78 rad peak for RF 1 mrad to 1 rad peak for RF 1 mrad to 2 rad peak for RF 1 mrad to 4 rad peak for RF 1 mrad to 5 rad peak for RF

03DEC2013

NAVSEA TMDE Program

[16 MHz- 30.99 MHz] [31 MHz- 500 MHz] [500 MHz- 1.0 GHz] [1 GHz- 2.0 GHz] > 2.0 GHz

3.3.4.1.2. 1 Accuracy: ±1 0% [~0 ~ 1 rad]

3.3.4.1.3 Display/Resolution: Digital display 01\/l.Devi~tlQ,U,F!Ild Rate /3 digit min (floating point)

3.3.4.2 External 0M •·· ··· · • · ·~"''"""""·'•·· · .... ·

3.3.4.2.1 Rates: At least 100 Hz tod~yMHzr·· · · [3 dB BW]

3.3.4.2.2 0M Deviation:.. · ,r;· .

4.1

4.2 .

4.4

1 mrad to 0.J'39 r 1 mra o ·o::l~

. tPinact P

.··~ rhr~d;·:~~~r''~ 1'.

BatteQt.R~str:ittionsPer Ml R~,~~8~POF, Lithium anct:"' rcury batteries ~re j . •. :~ '0,·: ~:··. . • ;i,;,~,.·,\·.··:<~. v ···: •• • •• • • • /:<~ .·. ; ' <:

, p · · ,,authdti.~ation. A requesU0i' approv~l fpr th~ < .U1~.ium and,~.erc su . itted fbthe'ptocuring acti'4J~Y.~~ the time of/ ·iOn .q,f1pr11~!~,sls onlylgJ!i!,e!'sp~qlfic'•model propos~.~~ ""· · · · · · ···

. . . ''> ,_ki·~v.· .. )·.Y' ' . ·. "'""< .•

Mi

· .. 91

~ed for naval t?i?

- Commerci~fl~"~vailable e~i, · b~1,~ri~st~~JtioQifie~~M0ysed in'th~Jj,ev,ipe ~~~ommended by .,,, 0 ' • /' ••,.;<·,,,, ·• "" "'ffis;'> two>._.(·· ·&.:-?':··:tfJ<·/ · .•::S,/;'' the application ma!1Lif0(3Cfurer, . ~;.';~:. .··. ·· • '·"P · · ~~:T~~ · .<;:;:"'

-Coin cell batterres;h§l~g.9;~~ be~fi~edwifl ~?iri": u~~ti -Coin cell batteries shall. no,fS'e rated. fg!:l!'ki!;9r7ct~:volts"(~~x;irrl0m nominal output voltage).

-Coin cell batteries shall not be~rat~&:l,;f9r ITI:9Ee.,Hl~f,'k;liArill~re-Hour nameplate capacity.

The coin cell manufacturer and model identification/part number shall be provided at the time of submission of proposals.

4.5 Calibration Interval The calibration interval shall be 12 months. At the end of this interval, a minimum of 85% of the equipment shall remain in tolerance.

4.6 Calibration Procedure The procedure, software, and special interfaces/adapters that are needed for the equipment calibration shall be provided. Special or unique standards required to calibrate the equipment shall be identified in the maintenance manual.

4.7

The procedures should provide: A minimum Test Accuracy Ratio (TAR) of 4:1, or a Test Uncertainty Ratio (TUR) equal to or greater than 4:1, or a Probability of False Accept (PFA) not to exceed 2%.

,,: .. '- ·~.~~::~~0v~i.~:~~~~Pf%tr?,:: ·,, Any electronic or softw~;,pod;l~x;~ssary&to COJll1lliD!-!J}l~~tei,Wit~, .. \' ~odify internal operating parameters, or impos lotatio · . faq~ors on any prop!)sed in$trument model shall be provided to the Gove meot.:at·:l1 · · ·· .'"' '<~i '. ',·_.'."• conform to u:;;'levet2 ,.. '"""~'"'n""',"""' wh~re tr,J~intenan¥e~J1l~:r'~pair is an expected phase ;f eq "n''"'"''"' mainten~nce and troubleshooting information is.reguired. A Use

.· .. (~perat()r's Manual~;$nall.be provided separately. ·Mainterance and If.' . . ... ... . . :. • ·.

,,prov' t\Af9!J~vels of maintenance, unit operational verification lev

A:"l~~~rn . ;~~:;red for performance verification s~alfinglu~e:

ctions to verify equipment performance, ~;;> ..

e equipment required for verification~test§, bY .· ·. · ,instructions for .te.sl col1ne'd'tid'll*s;:

, pta , .·• 'sulf'C:riteria, ~. f;~.· ·•·• ···· · , . c~i1bration inf ticm·:

Parts lists shall iWc!ude~ •,

• Parts lists shall•be<~.~Owri:on iUust.~~tio~~Ji:a9 _ •P'B' reference to other lllusfriatL<?fl§.\•· .· ... · .. ... ·:;;:::::'~·• ·

• Part number, cage code, and generic~~escdption.

The technical manual shall be provided in both printed and electronic formats. The printed format shall be otherwise normally provided. The electronic format shall be in Portable Document Format (PDF)- ISO 32000-1:2008. Two separate CD/DVDs are required, one shall contain the Use and Installation manual and one shall contain the Maintenance and Service manual. Individual file size may not exceed 5 MB. It is permissible to divide manuals into multiple files of less than 5 MB to meet this requirement.

4.8

4.9

4.10

4.11

The statement of copyright release:

03DEC2013

NAVSEA TMDE Program

"REPRODUCTION AND DISTRIBUTION OF THIS TECHNICAL MANUAL IS AUTHORIZED FOR

GOVERNMENT PURPOSES."

shall be printed in the first two pages of each technical manual and on the surface of the CD/DVD supplied.

Remote Control The equi PRF -28800F. Th~ .<;U9 interface that pcovid~s

· terface in accordance with MIL

.• pw .

distances.

'~ ,:'"';< <' .:¢tifo;:

,,1/f/v Ai"

Optional Transiti.€.ase The sig!;ial gei;i~!!,~j¢;:z$l:i§:llb~ suppli~g Vll!~n a!fi <i{i . ·. \ ".,,,,., ~·,·> ,·.,·' ,, . . . . ,, ,::;:::;_\~) .... ·,. ' ' .. ' . . .. '':' · ... ' . ' > '., ;·:'··=">· ·''' A<'«. ' ~.

,8. A second digital ··control over extended item option •. 'The Mrd tr~nsitoase shall comply·with the . .. t1bn~in stand~?' . ~:, .· • , . . '~ . . ~;~ ~~ ,.~ QptiohaiRack MountThe signal generator shall be'supplied with rad((nOunt line item.6ptron. r . 11 •.

Additional Requirements Identification plates, package labeling and other additior ~respecifiecHn the CDRL of the solicitation. ·

SCAT 4380

SIGNATURE PAGE

Engineering Agent Approval:

f Digitally signed by

MAKI E I L. STEVEN . P ~~~~~~s~~~~EsN ~~vL•~~~;;~~~~~~~o.

OLES.1230528213 ~~=~~~~~~~~VENPOLES.1230528213

Date: 2013.12.0.3 H:A;2:4?' .os•oo•··

A~ Q;!=Ri:QN .J'f;lffi'F ~9~.~ .• ~'04720.

~rvtD E;'1;~~'Qfa*rn1Jf:tfla~er J; ) ;;;,·,, " '> ··)· .... ~,.,)

03DEC2013

NAVSEA TMDE Program

12/3/2013

Date